Answer:
An acid is defined as a substance whose water solution tastes sour, turns blue litmus red and neutralizes bases. A substance is called base if its aqueous solution tastes bitter, turns red litmus blue or neutralizes acids. Salt is a neutral substance whose aqueous solution does not affect litmus
A car of mass 1500 kg starting from rest can reach a speed of 20
m/s within 10 seconds. Calculate the accelerating force of the car
engine.
Explanation:
F=MA
F=1500 * 2
F=3000N
plzzzz help me this is due today. only need help with these two questions and the element is oxygen.
How do protons, neutrons, and electrons differ in terms of their electrical charges and locations within the atom?
Describe the four fundamental forces. Which of these forces are involved in chemical bonding?
Answer: thanks for the point
Explanation:
A book that weighs 5 N sits on a table. What force does the table apply to the book?
Answer:
E =F.d =[1/2]mv^2
mad = [1/2]mv^2
d= v^2/2a ,v=u+at , v^2 = [at]^2 since u=0
So d = at^2/2
F = ma= 20a= 50 , a=5/2 and t=2
so d = [5/2][2^2]/2=5
Explanation:
Every action has an equal and opposite reaction. It is an action-reaction principle. Therefore the table exerts a force of 5 N on the book in order to be in stable condition.
What is Newton's third law of motion?Newton's third law of motion state that every action has an equal and opposite reaction. It is an action-reaction principle. It stated that the force always exists in a pair.
Therefore the table exerts a force of 5 N on the book in order to be in stable condition.
The given data in the problem is ;
W is the weight of the book sits on table = 5N
N is the normal force on the book
From the equilibrium equation ;
Weight -Normal force on the book =0
Weight =Normal force on the book
The normal force on the book =5N
Hence the table exerts a force of 5 N on the book in order to be in stable condition.
To learn more about Newton's third law of motion refer to the link;
https://brainly.com/question/1077877
The gravitational force between two objects is
proportional to the products of the masses and
proportional to the square of the distance between them.
The complete question is;
The gravitational force between two objects is ______ proportional to the products of the masses and _______ proportional to the square of the distance between them.
Answer:
First dash is directly
Second dash is inversely
Explanation:
From Newton's law of gravitation the gravitational force is given by the equation;
F = GMm/r²
Where:
F is gravitational force
M and m are two masses representing the two objects
r is the distance between them
G = universal gravitational constant
Thus, if we are to write it in proportion format, we will have;
F ∝ Mm/r²
From this proportion relationship, we can see that the Gravitational force is directly proportional to the products of the two masses and inversely proportional to the square of the distance between them.
Answer:
DirectlyInverselyExplanation:
The gravitational force between two objects is directly proportional to the products of the masses and inversely proportional to the square of the distance between them.
When momentum is conserved it is called _____. (multiple choice)
A.) Conservation of Momentum
B.) The Law of Momentum
C.) The Physics of Momentum
D.) The Rules of Momentum
Answer:
Based off the word "conserved" I would say
A. Conservation of Momentum.
Explanation:
Answer:
A.) Conservation of Momentum
What two things does force depend on
Explain you own words why energy is considered to be naturals money. Give an example to support your explanation
Answer:
because we naturally use energy everyday in everyway , energy is also a bill for instance you electric bill used by energy
Explanation:
Engine 1 produces twice the power of engine 2.
If it takes engine 1 the time T to do the work W, how long does it take engine 2 to do the same work?
Express your answer in terms of some of all of the variables T and W.
T2=________________
Answer:
[tex]T_2=\frac{T}{2}[/tex]
Explanation:
Given that engine 1 produces twice the power of engine 2.
Let [tex]P_1[/tex] and [tex]P_2[/tex] be the power of engine 1 and engine2.
So, the power of the engine 2,
[tex]P_2 = 2P_1\cdots(i)[/tex]
As, Work = Power x time,
So, the work, W, done by an engine 1:
[tex]W=P_1\timesT\cdots(ii)[/tex]
The work, W, done by an engine 2:
[tex]W_2=P_2\times T_2\cdots(iii)[/tex]
If the work done by both the engines are the same, then
[tex]W_2=W[/tex]
[tex]\Rightarrow P_2\times T_2=P_1\timesT[/tex] [from (ii) nd (iii)]
[tex]\Rightarrow 2P_1\times T_2=P_1\timesT[/tex] [by using (i)]
[tex]\Rightarrow 2 T_2=T \\\\\Rightarrow T_2=\frac{T}{2}[/tex]
Hence, [tex]T_2=\frac{T}{2}.[/tex]
The time taken for engine 2 to do the same amount of work is given by:
T₂ = 2TLet the power of the 1st engine be P₁
Let the power of the 2nd engine be P₂
Power = Work / timeFrom the question given above,
Engine 1 produces twice the power of engine 2.
Thus,
P₁ = 2P₂
P₂ = ½P₁
Next, we shall determine the power used by engine 1 to do the work in time T.Work = W
Time (T₁) = T
Power (P₁) =?Power = Work / time
[tex]P_{1} = \frac{W}{T}\\\\[/tex]Finally, we shall determine the time taken for engine 2 to do the same work.Work = W
Power of engine 1 (P₁) = [tex]\frac{W}{T}\\\\[/tex]
Power of engine 2 (P₂) = ½P₁
Power of engine 2 (P₂) = [tex]\frac{1}{2} (\frac{W}{T}) = \frac{W}{2T}[/tex]
Time (T₂) =?[tex]Power = \frac{Work}{time} \\\\ P_{2} = \frac{W}{T_{2}} \\\\\frac{W}{2T} = \frac{W}{T_{2}} \\\\\frac{1}{2T} = \frac{1}{T_{2}}\\\\[/tex]
Invert
T₂ = 2TTherefore, the time taken for engine 2 to do the same amount of work is: T₂ = 2T
Learn more: https://brainly.com/question/21822614
Do machines create less work? Example: pulley system
Answer:
Technically, no the work of building machines is hard but in the long run, Yes they are easier after they're built.
Explanation:
An example of a poor coping mechanism is ?
Answer: A bad, maladaptive, unhealthy or destructive coping mechanism is one where the behavior does not resolve the problem in the long-term and may actually increase the harm. Unhealthy coping strategies may feel like they are having the desired effect in the short term.
Explanation: Yes, it was from google...
The most important characteristic in designing the soundproof room is to create walls that
Answer:
make sound bounce off walls
Answer:
Explanation:
Walls that absorb the sound and dont just bounce or reflect the sound straight back. Like how video makers have foam walls with ridges on their walls.
what is the KE of a 1.00 kg hammer swinging at 20.0 m/s? 200 Joules
I know the answer I just need help understanding it.
Answer:
Explanation:
From the question given above, the following data were obtained:
Mass (m) = 1250 kg
Velocity (v) = 20.0 m/s.
Kinetic energy (K.E) =?
Kinetic energy is simply defined as energy possed by a body in motion. Mathematically, it is expressed as:
K.E = ½mv²
Where:
K.E is the kinetic energy
m is the mass of the object
v is the velocity of the object.
Thus, we can obtain the kinetic energy of the automobile by using the above formula as illustrated below:
Mass (m) = 1250 kg
Velocity (v) = 20.0 m/s.
Kinetic energy (K.E) =?
K.E = ½mv²
K.E = ½ × 1250 × 20²
K.E = 625 × 400
K.E = 250000 J
Therefore, the kinetic energy of the automobile is 250000 J
A car travels 14 km due west, then does a
U-turn, and travels 43 km due west.
I. What total distance has the car
traveled?
II.
What is the total displacement of the
car?
III. If the entire trip took 3.20 hours.
determine the average speed of the
car. Give
your answer in both
km hour, and m s. (show
conversion)
IV. If the entire trip took 2.50 hours.
determine the average velocity of
the car. Give your answer in both
km h, and mph (show conversion)
Explanation:
It is given that,
A car travels 14 km due west, then does a U-turn and travels 43 km due east (when it takes U-turn, it will change direction from west to east)
i. Total distance = total path covered
= 14 km + 43 km
= 57 km
ii. Let east is positive and west is negative.
Displacement = final position-initial position
= 43-14
= 29 km
iii. If time taken in the entire trip = 3.2 hours
Average speed = distance/time
[tex]s=\dfrac{57\ km}{3.2\ h}\\\\=17.81\ km/h[/tex]
1 km/h = 0.2777 m/s
17.81 km/h = 4.94 m/s
iv. If time taken in the entire trip = 2.5 hours
Average velocity = displacement/time
[tex]v=\dfrac{29\ km}{2.5\ h}\\\\=11.6\ km/h[/tex]
1 km/h = 0.621 mph
11.6 km/h = 7.2 mph
Henc, this is the required solution.
Help please! I hope the given possibles help
Answer:
The answer is "[tex]5.184 \times 10^{23}[/tex] kg"
Explanation:
Given:
[tex]g= 6.003 \ \frac{m}{s^2}\\\\G= 6.67 \times 10^{-11} \ \frac{N - m^2}{kg^2}\\\\M=?\\\\radius= 2,400 \ km\\\\[/tex]
Calculating diameter:
[tex]Diameter =radius \times 2[/tex]
[tex]=24\times 10^5 \times 2\\\\=48 \times 10^5 \ m[/tex]
The formula for mass calculation:
[tex]\to g = G \times \frac{M}{(\frac{d^2}{4})}\\\\\to g=G\times \frac{4M}{d^2}\\\\\to 4M= \frac{g \times d^2}{G} \\\\\to M= \frac{g \times d^2}{4G} \\\\[/tex]
[tex]=\frac{6.003 \times (48 \times 10^{5})^2}{4 \times 6.67 \times 10^{-11}}\\\\=\frac{6.003 \times 2,304 \times 10^{10}}{26.68\times 10^{-11}}\\\\=\frac{13,830.912 \times 10^{10}}{26.68\times 10^{-11}}\\\\=518.4 \times 10^{21}\\\\= 5.184 \times 10^{23}\\\\[/tex]
Diana hangs a lead cylinder with a force of 12 N from a model bridge.
Which vector(s) accurately illustrates the reaction force of the bridge on the lead cylinder?
The action and reaction law allows us to find that the reaction force, the weight of the cylinder, is:
12 N force directed upward
Newton's third law or action and reaction law, establishes that if two bodies interact with each other the force that one applies to the other, is equal in magnitude to the force of the second on the first but in the opposite direction, that is, all forces act in pairs one in each body that interact.
Forces with these characteristics are called action and reaction.
In this case we have a hanging cylinder, with the cylinder it has mass so the weight is 12 N it acts on the table in a downward direction, let's say this is the action force.
In response to this force, the table exerts a force on the cylinder of equal magnitude but in the opposite direction, which is why it is directed upwards.
let's analyze the force diagram
When analyzing the forces shown in the diagram, the forces of equal magnitude to the weight are the first twoThe weight is directed downward, the answer must be directed upward.
In conclusion using theaction and reaction law we find that the answer for reaction force is:
12 N force directed upward
Learn more about the action and reaction law here:
https://brainly.com/question/22746565
Please help! Will mark brainliest!
Answer:
im pretty sure its d
Explanation:
A rose plant inherited two alleles for white flower petals.
Which conclusion is best supported by the given information?
Answer:
a
Explanation:
Answer:
A or each parent had at least one allele for white pedals
Explanation:
Help!! Or I get an F!!!
What planet could you jump the highest?
Answer:
Is Mercury an answer on your thing?
Explanation:
Mercury has the least amount of gravity, so therefore you can jump the highest on Mercury.
Answer:
Jupiter
Explanation:
Jupiter has more than 300 time the mass as earth. so, it's gravitational pull is stronger.
Hopefully this helps
PLS HELP which ones would be made of cells? and which ones show cell walls?
Cork, Sponge, Wood, Plastic, Tree
The first question's answer depends on what you mean by "sponge". If you're talking about sea sponges, then all but plastic are made up of cells. Some sponges used for cleaning are also made of plant material but also other, non-organic materials like dyes.
Cell walls are only present in plant cells, so they would be found in cork (derived from a certain tree bark), wood, and trees. Synthetic sponges made with plant material might also contain them, but they wouldn't be made entirely of cells with walls.
From given options or choices all are made up of cells except plastic and among the other four Cork, Sponge, Wood, and tree all show cell walls except Sponge.
A cell is the basic structural unit of all living organisms and contains various cell organelles. On the base of different cell organelles or presence or absence of the certain organelles help in distinct and divide the cell type.
The major types of cells are:
Prokaryotic cellsEukaryotic cellsPlastic is not a living organism as there are no cells and is made up of polymers of hydrocarbon.
The cell wall is one of the major cellular structures that helps in identifying the type of cell organism and protects the organism from the external environment. It classifies the organism on its constituent of the cell wall.
In eukaryotic cells, animal cells have no cell wall, however, fungi cells, plant cells have a cell wall. A sponge is an animal and other cork wood, and trees are plants or plant-based products.
Thus, the sponge does not show the cell wall.
Learn more about the cell wall:
https://brainly.com/question/18662393
Jenny puts a book on her desk. Jenny’s book has an area of 200 cm2.It exerts a pressure of 0.05 N/cm2 on the desk. What is the weight of the book? *
deducing the acceleration = deduce the gradient of velocity-time graphs
true or false?
Answer:
True
Explanation:
Understanding the relationship between change in velocity with time will explain to you how the object is accelerating or decelerating. This means acceleration is a ratio calculated from the change in velocity of an object and change in time. In a velocity time graph, the y-axis represents the velocity and the x-axis represents the time.
The slope of the graph m = Δ y-axis values/Δ x-axis values
m= Δvelocity / Δ time
m= Δ v / Δ t ------this the definition of acceleration so;
a= Δ v / Δ t
Conclusion : The slope/gradient of a velocity -time graph is acceleration.
I need a little help with this
Answer:
truck 1 has the most velocity
Explanation:
Because it weights less which means it faster and yea
A box is sitting stationary on a long level ramp on level ground. The coefficient of static friction is (1.0). One end of the ramp is slowly lifted higher and higher. What is the angle of the ramp with respect to the ground when the box begins slidig?
Answer:
45 degrees
Explanation:
Given that the coefficient of friction, [tex]\mu=1.0[/tex]
Let the angle of the ramp be [tex]\theta[/tex].
The gravitational force acting downward [tex]=mg[/tex]
The normal reaction by the ramp on the box, [tex]N=mg\cos\theta[/tex]
So, the maximum frictional force that can act on the box, [tex]f= \mu N[/tex]
The force along with the plane in the direction of sliding, [tex]F = mg\sin\theta[/tex]
When the box begins sliding, the F must have to overcome the frictional force,f.
So, F=f
[tex]mg\sin\theta=\mu N \\\\mg\sin\theta=\mu mg\cos\theta \\\\\frac {\sin\theta}{\cos\theta}=\mu \\\\\tan\theta=\mu \\\\\theta=\tan^{-1}\mu \\\\[/tex]
Putting the value of \mu, we have
[tex]\theta=\tan^{-1}1[/tex]
[tex]\theta=45[/tex] degrees.
Hence, the angle of the ramp with respect to the ground when the box begins sliding is 45 degrees.
Which element most likely interacts with water the same way lithium interacts with water?
Answer:
Is there a multiple choice or select all that apply? I would say Potassium (K) or Sodium (Na)
Explanation:
The radius of the planet Mercury is 2.43 x 10^6m and its mass
is 3.2 x 10^23 kg. What is the speed of a satellite in orbit
265.000 m above the surface?
[tex]\huge\boxed{Option D}[/tex]
_____________________________________DATA:Radius of Mercury = [tex]R_m[/tex] = [tex]2.43x10^6m[/tex]
Mass of Mercury = [tex]M_m = 3.2x10^{23}m[/tex]
Distance Satellite above the surface of the Mercury = d = 265,000m
Gravitational Constant = [tex]G = 6.67x10^{-11} \frac{N.m^2}{kg^2}[/tex]
_____________________________________SOLUTION:Since the Satellite is orbiting around the Planet Mercury, due to the centripetal force, and Centripetal force is the force that acts towards the center of the circle, Whereas The gravitational force also acts towards the center of the circle thus we can say that Centripetal force is equal or same as centripetal force. So,
[tex]F_g =F_C[/tex]
Fg is Given by,
[tex]F_g = \frac{GM_MM_S}{r^2}[/tex]
Fc is Given by,
[tex]F_c=\frac{M_SV^2}{r}[/tex]
Where,
G is Gravitational Constant
[tex]M_e[/tex] is mass of Planet Mercury
[tex]M_S[/tex] is Mass of Satellite
r(small letter) is the distance between the center of the Planet Mercury and the satellite.
V is velocity of satellite
_____________________________________Now,
[tex]\frac{GM_MM_S}{r^2} =\frac{M_SV^2}{r}[/tex]
[tex]V = \sqrt\frac{GM_M}{r}[/tex]
r can also be written as,
[tex]V = \sqrt\frac{GM_M}{R_M +d}[/tex]
Substitute the variables,
[tex]V = \sqrt{\frac{(6.67x10^{-11})x(3.2x10^{23})}{2695000}[/tex]
Simplify the equation,
V = 2814 [tex]\frac{m}{s}[/tex]
Approximately,
V = 2800 [tex]\frac{m}{s}[/tex]
_____________________________________Best Regards,'Borz'Question 4 of 10 Which three components define a person's overall health? A. Mental and emotional health B. Social health C. Physical health D. Public health
Answer:
physical, social, and mental
Explanation:
Answer:
A,B,C
Explanation:
These three maintain the overall health of the person being. Take for instance an example a cake, it has layers that make the overall cake. So it is with the persons health, it takes all three of these feilds to make the overall health.
Could somebody please explain the Coriolis effect? Thank you! (also the subject is physical science but that wasn't an option so I just put physics)
Answer:
The Coriolis Effect makes things appear to move in a curve around our planet, like, for example, a plane. This is also due to the fact that our Earth is round, so nothing really moves in a straight line. It is "an effect whereby a mass moving in a rotating system experiences a force (the Coriolis force ) acting perpendicular to the direction of motion and to the axis of rotation."
Explanation:
Question 4 of 10
Which option is a good blackbody radiator?
O A. A lightbulb
O B. A balloon
O C. A person
O D. A mirror
SUBM
Answer:
A lightbulb
Explanation:
Answer:
Lightbulb
Explanation: got it right
1. A large ocean liner floating in the sea has a volume of
375 000 m² and displaces 50 000 m² of sea water. Determine the
density and mass of the ship. Explain why, despite being made
of metal, the ship is able to float.
Answer:
Density of the ship :133.33 kg/m³
Mass of the ship :50,000,000 kg
Ships are able to float on water because they displace a volume that equals their own weight
Explanation:
The formula for density is ;
Density = Mass/Volume
But the mass of displaced fluid is give by the formula;
m=ρV where ρ is density of the fluid and V is volume of water displaced
Volume of liner= 375000 m³
Volume displaced = 50000 m³
The volume of the water displaced is equal to mass of the liner
I m³ = 1000 kg
50000 m³ = 50000*1000 =50,000,000 kg
50,000,000 kg ----------mass of the ship
So if ;
m= 50,000,000 kg
v= 375000 m³
ρ = m/V
ρ = 50,000,000/375000
ρ = 50,000,000/375000
ρ =133.33 kg/m³
Ships are able to float on water because they displace a volume that equals their own weight. Additionally, the air contained in the spaces of the ship inside is much less dense than density of water aiding in the floating process.
it takes 5100 N of force to accelerate a ford mustang 3 m/s2 what is the mass of the car
Answer:
1700 kg
Explanation:
The mass of the ford mustang car be 1700 kg.
What is mass?In physics, mass is a quantitative measurement of inertia, a basic characteristic of all matter. It essentially refers to a body of matter's resistance to changing its speed or location in response to the application of a force.
The change caused by an applied force is smaller the more mass a body has. The kilograms serves as the unit of mass in the International System of Units (SI).
Given parameters:
Force applied on the ford mustang car: F = 5100 N.
Acceleration of the ford mustang car: a = 3 m/s^2.
So, The mass of the ford mustang car be = force/acceleration
= 5100/3 kg.
= 1700 kg.
Hence, the mass of the ford mustang car be 1700 kg.
Learn more about mass here:
https://brainly.com/question/19694949
#SPJ2