Answer:
The work efficiency formula is efficiency = output / input, and you can multiply the result by 100 to get work efficiency as a percentage. This is used across different methods of measuring energy and work, whether it's energy production or machine efficiency.
Explanation:
Above sea level, water boils at a __ temperature due to the __ atmospheric pressure.
Answer:
lower, lower
Explanation:
When atmospheric pressure is lower, such as at a higher altitude, it takes less energy to bring water to the boiling point. Less energy means less heat, which means water will boil at a lower temperature at a higher altitude.
A car that's initially traveling at 10 m/s acceleration uniformly for 4 seconds at a rate of 2 m/s?in a straight line. How far does the car travel during this time?
Answer:
Explanation:
The answer is -2m/s²
In a car engine, fuel is ignited within a cylinder to cause an explosion that moves a piston. If the explosion exerts 300 Pa of pressure on a piston with a surface area of 80 cm^2?
The force exerted by the explosion on the piston is 2.4 N.
The given parameters:
Pressure of the explosion on piston, P = 300 Pa (N/m²)Surface area of the piston, A = 80 cm²The force exerted on the piston by the explosion is calculated as follows;
F = PA
where;
A is the area of the piston in m²
The surface area of the piston in square meter is calculated as follows;
[tex]A = 80 \ cm^2 \times \frac{(1m)^2}{(100 \ cm)^2} \\\\A = 0.008 \ m^2[/tex]
The force exerted by the explosion on the piston is calculated as follows;
[tex]F = 300 \ (N/m^2)\ \times \ 0.008 \ (m^2)\\\\F = 2.4 \ N[/tex]
The complete question is here:
In a car engine, fuel is ignited within a cylinder to cause an explosion that moves a piston. If the explosion exerts 300 Pa of pressure on a piston with a surface area of 80 cm^2, what is the force exerted on the piston?
Learn more about force and pressure here: https://brainly.com/question/22930937
A neutral object has:
a. Zero electrons.
b. Zero protons.
c. Only neutrons.
d. An attraction to negative objects.
e. An attraction to neutral objects.
Answer:
c. Only neutrons.
hope it helps :)
How much energy is needed just to boil 5kg of water at 100◦ C?
The power ratings of several motors are listed in the table. A 2 column table with 3 rows. The first column is labeled motor with entries, brand X, brand Y, brand Z. The second column is labeled Power in watts with entries 7460, 7650, 7580. An advertising agency writes marketing material for a new motor (Brand W) that has a power rating of 7,640 W. Which statement comparing the motors can they truthfully use? Brand W motor can finish any job faster than Brand Y motor can. There’s not a more powerful motor available. Brand W motor does more work each second than Brand X or Brand Z. Every second, Brand W motor does 7,640 N of your toughest work.
The statement " Brand-W motor does 7,640 N of your toughest work." can be truthfully use.
Advertisement Rules:
An advertiser can not compare its products using the other companies name.An advertiser can not make the false statement in its advertisement.Here, the brand-W has the power rating of 7,640 W that is less than brand-Y. Advertiser cannot compare his brand using the name of Brand X, Y, or Z.
Therefore, the statement " Brand-W motor does 7,640 N of your toughest work." can be truthfully use.
To know more about Advertisement Rules:
https://brainly.com/question/13679377
Answer:
The correct answer is C, Brand W motor does more work each second than Brand X or Brand Z.
What is the final velocity of an object that starts from rest and travels for 5 seconds at an acceleration of 4.3 m/s2?
Answer:
This is the answer that I got.
Explanation:
Hope it is right.
How long did it take Sally riding her bike to slow down from 18 km/h to 6 km/h if the deceleration was at a rate of 4 km/h/s?
4.5 seconds
3 seconds
3 hours
6 seconds
Help if u can please
Answer:
d
Explanation:
How can you decrease the amount of input force of a wheel and axle?
Explanation:
hmm by the increasing the size of wheel and decreasing axle
PLEASE HELP!! WILL GIVE BRAINLIEST IF YOU SHOW WORK. ITS DUE SOON :(
If the radius of the CD below is 6.0 cm and the angular velocity is 5.0 rad/s, what is its angular displacement in 2.0 s? What is it's Linear displacement on the edge in 2.0 s? Please show work :(
Answer:
theta = ω t = 5.0 / sec * 2 s = 10 rad
S = R theta = 6 cm * 10 rad = 60 cm
The angular displacement of CD if the radius of the CD below is 6.0 cm and the angular velocity is 5.0 rad/s, is 10 rad, and the linear displacement is 60 cm.
What is velocity?When anything is moving, its velocity tells us how quickly that something's location is changing from a certain vantage point and as measured by a particular unit of time.
If a point moves along a path and covers a certain distance in a predetermined amount of time, its average speed over that period of time is equal to the distance covered divided by the travel time. A train traveling 100 kilometers in two hours, for instance, is doing it at an average speed of 50 km/h.
Given:
The radius of the CD, r = 6 cm,
The angular velocity, v = 5 rad / sec
The time, t = 2 sec,
Calculate the angular displacement by the formula given below,
[tex]v = s / t[/tex]
5 = s / 2
s = 10 rad,
Calculate the linear displacement by the formula given below,
Linear displacement = [tex]r\ s[/tex]
Linear displacement = 6 × 10
Linear displacement = 60 cm
Therefore, the angular displacement of CD if the radius of the CD below is 6.0 cm and the angular velocity is 5.0 rad/s, is 10 rad, and the linear displacement is 60 cm.
To know more about velocity:
https://brainly.com/question/19979064
#SPJ2
A car weighing 8000N is traveling at 45 m/s on a perfectly flat, frictionless road. If the driver slams on the brakes, how far will thw car slide before it comes to a stop?
Without friction, the car cannot stop...
Fill in the blanks about Newton’s First Law of Motion:
Objects want to ____________ ____________ doing what they’re ____________ ____________ because they are “lazy.” This is called ____________.
Objects want to continue doing what they’re doing because they are “lazy.” This is called law of inertia.
Newton's first law of motion states that an object at rest or uniform motion in a straight line will continue in that state unless it is being acted upon by an external force. This law is also called the law of inertia because it depends on mass.
From the given question, we can fill gaps as follows;
Objects want to continue doing what they’re doing because they are “lazy.” This is called law of inertia.
Learn more about Newton's first law of motion here: https://brainly.com/question/10454047
Read the picture, please. I am a bit confused about what it means when it says which one supports it.
Answer:
not suppoted
not supported
support
What is electromagnetic wave ?
its an electric magnetic cell this uses electricity
Desperate Please Hurry
What was the evidence that Earth was round before there were photos from space?
Answer:
?????
Explanation:
????????????????????‽,??????????????????‽????????????????????????????????????
Describe when the chemical
reaction occurs in a dry-cell
battery
Answer:
For a dry-cell battery to operate, oxidation will occur from the zinc anode and reduction will take place in the cathode. The most common type of cathode is a carbon graphite. Once reactants have been turned into products, the dry-cell battery will work to produce electricity.
Explanation:
The battery operates through electrochemical reactions called oxidation and reduction. These reactions involve the exchange of electrons between chemical species. If a chemical species loses one or more electrons, this is called oxidation. The opposite process, the gain of electrons, is called reduction.
Why don't atoms get too close?
a.) The electrons from atom repel each other
b.) The protons from each atom repel each other
c.) The neutrons from each atom repel each other
Answer:
This tends not to happen, because atoms are composed of charged particles that interact at a distance. ... Since the electrons are around the outside of the atom, those are the things that first interact, and as they have the same charge, they repel one another.A. The electrons from atom repel each other
A young diver is practicing his skills before an important team competition. Use the diagram below in order to analyze the energies of the diver and complete the statements below.
Where m = mass (kg), g = 9.8 m/s2, v = velocity (m/s), h = height (m), KE = kinetic energy (J), and GPE = gravitational potential energy (J).
Use the equations above to answer the following questions.
A diver with a mass of 90 kg is at a height of 10 m, and he has not jumped off of the board yet (v = 0 m/s). When the diver reaches a height of 5 m (Point C), his gravitational potential energy is
A. 1350 J
B. 8820 J
C. 4410 J
D. 0 J
and his velocity is
E. 4.5 m/s
F. 0 m/s
G. 3.2 m/s
H. 9.9 m/s
Please help will mark brainliest
Answers:
The gravitational potential energy of the diver when he reaches point C is 4410 J.
The velocity of the diver is 9.9 m/s.
Hope you could get an idea from here.
Doubt clarification - use comment section.
[tex]\\ \sf\longmapsto PE=mgh[/tex]
[tex]\\ \sf\longmapsto PE=90(5)(9.8)[/tex]
[tex]\\ \sf\longmapsto PE=4410J[/tex]
Now
It's converted to kinetic energy while reaching ground.
[tex]\\ \sf\longmapsto K.E=4410[/tex]
[tex]\\ \sf\longmapsto \dfrac{1}{2}mv^2=4410[/tex]
[tex]\\ \sf\longmapsto 90v^2=8820[/tex]
[tex]\\ \sf\longmapsto v^2=98[/tex]
[tex]\\ \sf\longmapsto v=9.9m/s[/tex]
do we use more freshwater in our homes to provide us with electricity
Answer:
No. Water can be used in a hydroelectric dam to generate electricity, but this does not make us use more or less water in our homes.
Explanation:
Answer:We use more freshwater to provide us with electricity. Water is the only compound that can be found naturally as a liquid, gas, and solid.
Explanation:
A(n) 1700 kg car is moving along a level road at 21 m/s. The driver accelerates, and in the next 10 s the engine provides 22000 J of additional energy. If 3666.67 J of this energy must be used to overcome friction, what is the final speed of the car
The final speed of the car at the given conditions is 30.1 m/s.
The given parameters:
Mass of the car, m = 1700 kgVelocity of the car, v = 21 m/sTime of motion, t = 10 sAdditional energy provided by the engine, E₁ = 22,000 JEnergy used in overcoming friction, E₂ = 3,666.67 JThe change in the energy applied to the car is calculated as;
[tex]\Delta E = E_1 - E_2\\\\\Delta E = 22,000 \ J \ - \ 3,666.67 \ J\\\\\Delta E = 18,333.33 \ J[/tex]
The final speed of the car is calculated as follows;
[tex]\Delta E = \frac{1}{2} m(v_f^2 - v_0^2)\\\\v_f^2 - v_0^2 = \frac{2\Delta E}{m} \\\\v_f^2 = \frac{2\Delta E}{m} + v_0^2\\\\v_f = \sqrt{ \frac{2\Delta E}{m} + v_0^2} \\\\v_f = \sqrt{ \frac{2\times 18,333.4}{1700} + (21)^2} \\\\v_f = 30.1 \ m/s[/tex]
Thus, the final speed of the car at the given conditions is 30.1 m/s.
Learn more about change in kinetic energy here: https://brainly.com/question/6480366
Can we get less ads please i don’t like this
If the 0.10 kg baseball on the right has a
kinetic energy of 5 J, what is its velocity?
Answer:
10 m/sExplanation:
The kinetic energy of an object can be found by using the formula
[tex]k = \frac{1}{2} m {v}^{2} \\ [/tex]
m is the mass
v is the velocity
Since we're finding the velocity we make v the subject
That's
[tex]v = \sqrt{ \frac{2k}{m} } \\ [/tex]
From the question
k = 5 J
m = 0.1 kg
We have
[tex]v = \sqrt{ \frac{2 \times 5}{0.1} } = \sqrt{ \frac{10}{0.1} } = \sqrt{100} \\ = 10[/tex]
We have the final answer as
10 m/sHope this helps you
please help asap!!!!!!!!!!!
Find the distance traveled in one back-and-forth swing by the weight of a 12 in. Pendulum that swings through a 75 degree angle.
The distance traveled by pendulum, in one back-and-forth swing is 75.75 inches.
The period of pendulum can be calculated by
[tex]T = 2\pi \sqrt {\dfrac Lg}[/tex]
Where,
[tex]T[/tex] - period
[tex]L[/tex] - length = 12 inches
[tex]g[/tex]- gravitational acceleration = [tex]\bold {9.8\rm \ m/s^2}[/tex]
Put the values,
[tex]T = 2\pi \sqrt {\dfrac {12}{9.8}}\\\\T = 2 \times 3.14 \times \sqrt {0.122}\\\\T = 2.191[/tex]
Now, the angular displacement of the pendulum can be calculated by,
[tex]\theta = A\times\rm \ cos(\omega T)[/tex]
Where,
[tex]A[/tex]- amplitude
[tex]\theta[/tex] - angle = [tex]75^o[/tex]
[tex]\omega[/tex] - angular displacement = [tex]2\pi/T[/tex] = 2.866 m
Put the values and calculate for [tex]\omega[/tex],
[tex]75 = A\times{\rm \ cos}(2.866\times 2.191)\\\\75 =A \times cos\ 6.26\\\\A =\dfrac {75}{0.99}\\\\A = 75.75 \rm \ inches[/tex]
Therefore, the distance traveled by pendulum, in one back-and-forth swing is 75.75 inches.
To know more about Amplitude of pendulum,
https://brainly.com/question/14840171
Draw a diagram that represents how a mechanical wave interacts with a particular material.
Create a diagram and include reflection, absorption, and transmission.
Write a brief description (3+ sentences) of the interaction of the mechanical waves and the material. Include an explanation of how the amplitude and frequency of the wave are affected.
85 POINTS!!
When mechanical waves interact with material, it transfer its energy to the material.
What are mechanical waves?Mechanical waves are the type of waves that require a medium for transporting their energy from one region to another. Mechanical waves depend on particle interaction in order to transport their energy.
The amplitude and frequency of the wave are negatively affected due to the striking of mechanical waves with the material.
Learn more about waves here: https://brainly.com/question/75996
Answer:
i have a screenshot just use mine https:/ss27
Explanation:
A digital stopwatch reading 0:13 37. Read the elapsed time on the stopwatch and answer the questions. In which digit is there the least amount of confidence? How many significant figures does this measurement have?.
The digit with the least amount of confidence can be seen in the second part which is 7.
The number of significant figures in the measurement of the stopwatch is 4.
An elapsed time is the difference between the time prior to the commencement of an event and the time at which the event has ended.
From the stopwatch, the elapsed time is given as:
0hour : 13 minutes : 37 seconds
The digit with the least amount of confidence can be seen in the seconds part is 7.
A significant figure is a real figure that is dependable and absolutely essential to convey the quantity of something.
The number of significant figures in the measurement of the stopwatch is 4.
Learn more about elapsed time here:
https://brainly.com/question/10403745
Answer: 7 and 4
Explanation: A digital stopwatch reading 0:13 37.
Read the elapsed time on the stopwatch and answer the questions.
In which digit is there the least amount of confidence?
7
How many significant figures does this measurement have?
4
???????????????????????????????????
Make a super villain out of these resources
Answer:the super villain would have the ability to control electricity and could take any Metal object or weapons that anyone points at him because he is magnetic
Explanation:
What is science notation
Answer:
Scientific notation is the way that scientists easily handle very large numbers or very small numbers. For example, instead of writing 0.0000000056, we write 5.6 x 10-9. So, how does this work? We can think of 5.6 x 10-9 as the product of two numbers: 5.6 (the digit term) and 10-9 (the exponential term).
Explanation: