Help what's the answer?

The rate of the reaction is directly proportional to the stability of the carbocation intermediate, and any changes in the solvent will affect the rate of the reaction.

In an SN1 reaction, the rate-determining step is the formation of a carbocation intermediate. The stability of the carbocation intermediate affects the rate of the reaction.

In this case, if 2-propanol (isopropanol) was used instead of 2-methyl-2-propanol (t-butanol), the rate of the reaction would decrease. This is because the carbocation intermediate formed in 2-propanol is less stable compared to the one formed in t-butanol.

The carbocation intermediate formed in t-butanol is tertiary, which is more stable than the one formed in isopropanol, which is secondary. This means that the reaction will be slower in isopropanol due to the less stable carbocation intermediate.

To learn more about : reaction

https://brainly.com/question/29470602

#SPJ11

Answer:

condensation nuclei

Explanation:

the molarity of the diluted solution is 0.27 M.if 124 ml of a 1.2 m glucose solution is diluted to 550.0 ml

To solve the problem, we can use the formula:

M1V1 = M2V

where M1 is the initial molarity, V1 is the initial volume, M2 is the final molarity, and V2 is the final volume.

Plugging in the values we have:

M1 = 1.2 M

V1 = 124 ml = 0.124 L

V2 = 550.0 ml = 0.550 L

Solving for M2:

M2 = (M1V1)/V2

= (1.2 M * 0.124 L)/0.550 L

= 0.27 M

A solution is a homogeneous mixture of two or more substances. In a solution, the solute is uniformly dispersed in the solvent. The solute is the substance that is being dissolved, and the solvent is the substance in which the solute is being dissolved. For example, in saltwater, salt is the solute and water is the solvent.

Learn more about solution here:

https://brainly.com/question/30665317

#SPJ12

The molarity of the diluted glucose solution is approximately 0.2705 M.

To find the molarity of the diluted glucose solution after 124 mL of a 1.2 M solution is diluted to 550.0 mL, you can use the dilution formula:
M1V1 = M2V2

where M1 is the initial molarity (1.2 M), V1 is the initial volume (124 mL), M2 is the final molarity, and V2 is the final volume (550.0 mL).

Rearrange the formula to solve for M2:

M2 = (M1*V1) / V2

Now, plug in the given values:
M2 = (1.2 M * 124 mL) / 550.0 mL
M2 = 148.8 mL / 550.0 mL
M2 = 0.2705 M

To know more about Molarity:

https://brainly.com/question/14581742

#SPJ11

Mercury has the widest variation in surface temperatures between night and day of any planet in the solar system.

This statement is true. Mercury experiences the greatest temperature variation between night and day due to several factors. The main reasons are its proximity to the Sun, slow rotation, and lack of atmosphere.

During the daytime, temperatures on Mercury can reach up to 800°F (430°C) due to its close proximity to the Sun. This extreme temperature difference is due to the fact that Mercury's thin atmosphere is unable to regulate temperature and its slow rotation causes one side of the planet to be constantly facing the sun while the other is in perpetual darkness.

At night, temperatures can drop as low as -290°F (-180°C) because of its slow rotation and the lack of an atmosphere to retain heat. This results in the widest variation in surface temperatures between night and day of any planet in our solar system.

To know more about Mercury Variations in surface temperature:

https://brainly.com/question/16117265

#SPJ11

Mercury indeed has the widest variation in surface temperatures between night and day of any planet in the solar system. This is primarily due to its thin atmosphere, which cannot effectively retain heat, leading to extreme temperature fluctuations.

Mercury, being the closest planet to the sun, experiences extreme variations in temperature between its day and night sides. During the day, when the sun is overhead, the surface temperature on Mercury can rise to a scorching 430°C (800°F), which is hot enough to melt lead. However, as Mercury rotates and the sun sets, the temperature drops drastically to as low as -180°C (-290°F) at night.

The main reason for this extreme temperature variation is that Mercury has no atmosphere to regulate its surface temperature. Unlike Earth, which has an atmosphere that helps to distribute heat around the planet, Mercury's surface is directly exposed to the sun's radiation. This means that when the sun is shining on Mercury's surface, it heats up quickly and intensely, causing the temperature to rise to extreme levels.

Overall, the lack of an atmosphere and Mercury's proximity to the sun are the main factors contributing to the extreme temperature variations on the planet.

Learn more about atmosphere here:

https://brainly.com/question/11192430

#SPJ11

When aqueous ammonia is added to the half-cell containing 0.001 M CuSO4, the cell potential is likely to change. The reason for this is that ammonia can form coordination complexes with copper ions, which can affect the concentration of copper ions in the solution, and hence the concentration gradient that drives the redox reaction in the cell.

Ammonia can react with copper ions in aqueous solution to form a series of coordination complexes. The most common complex is Cu(NH3)42+, which is a tetraamminecopper(II) complex. The formation of this complex reduces the concentration of free Cu2+ ions in solution, which can shift the equilibrium of the redox reaction in the cell.

If the reduction half-reaction is Cu2+ + 2e- → Cu, the addition of ammonia can reduce the concentration of Cu2+ ions in the solution and shift the equilibrium to the left, decreasing the cell potential. On the other hand, if the oxidation half-reaction is Cu → Cu2+ + 2e-, the addition of ammonia can increase the concentration of Cu2+ ions and shift the equilibrium to the right, increasing the cell potential.

Learn more about aqueous ammonia

https://brainly.com/question/14672082

#SPJ4

After 100 years, there will be 6.25 grams of the substance remaining.

Half-life is the time it takes for half of the radioactive atoms in a sample to decay or for the concentration of a substance to decrease by half.

Amount remaining = initial amount x (1/2)^(number of half-lives)

In this case,  half-life of the substance is 10 years, which means that after 10 years, half of the substance will have decayed. After another 10 years (20 years total), half of remaining substance will decay, leaving 1/4 of the original amount. After another 10 years (30 years total), half of that remaining amount will decay, leaving 1/8 of the original amount. This process continues every 10 years.

To find the amount of substance remaining after 100 years, we need to know how many half-lives have occurred in that time: 100 years / 10 years per half-life = 10 half-lives

Amount remaining = 400 g x (1/2)¹⁰= 6.25 g

Therefore, after 100 years, there will be 6.25 grams of the substance remaining.

To know more about half life, refer

https://brainly.com/question/25750315

#SPJ1

The standard enthalpy change for the decomposition of hydrogen peroxide per mole of hydrogen peroxide is -98.2 kJ/mol.

when 1 mole of hydrogen peroxide (H2O2) ( H 2 O 2 ) undergoes decomposition, the heat evolved (ΔH) is −98.2kJ. − 98.2 k J . The molar mass of H2O2 H 2 O 2 is 34.015 g/mol. This means that the mass of 1 mole of H2O2 H 2 O 2 is 34.015 g.

This value is obtained from the standard enthalpy of formation of the products (H2 and O2) and the standard enthalpy of formation of the reactant (H2O2). Enthalpy of formation is the energy change that occurs when a compound is formed from its elements, in their standard states.

The difference between the enthalpies of formation of the products and the reactant is the enthalpy change for the reaction. In this case, the enthalpy change for the decomposition of hydrogen peroxide is -98.2 kJ/mol. This indicates that the decomposition of hydrogen peroxide is an exothermic reaction and it releases 98.2 kJ/mole of energy.

Know more about Hydrogen peroxide here

https://brainly.com/question/29102186#

#SPJ11

Tollens's test shows the presence of aldehydes . a positive Tollens's test appears as a silver precipitate . a negative Tollens's test appears as presence of ketone.

Tollens's test is a chemical test used to differentiate between aldehydes and ketones. In this test, a solution called Tollens's reagent, which contains silver nitrate and ammonia, is used to detect the presence of aldehydes. When an aldehyde is present, it undergoes oxidation by reacting with the Tollens's reagent, forming a silver precipitate.

A positive Tollens's test is indicated by the formation of this silver precipitate, which appears as a shiny silver layer on the inside of the test tube. This silver layer is also referred to as a "silver mirror." This reaction occurs because the aldehyde group is oxidized to a carboxylic acid, while the silver ions in the Tollens's reagent are reduced to metallic silver.

On the other hand, a negative Tollens's test means that no aldehyde is present, and thus, no silver precipitate forms. This is typically observed when a ketone is present in the test sample, as ketones do not readily undergo oxidation like aldehydes do. In this case, the test tube remains clear or slightly cloudy, depending on the reaction conditions and the substances being tested.

know more about Tollens's test here

https://brainly.com/question/30892406#

#SPJ11

Complete question is :-

tollens's test shows the presence of aldehydes . a positive tollens's test appears as a silver precipitate . a negative tollens's test appears as ______.

At equilibrium, the concentrations of NO, Br2, and NOBr in the flask will remain constant. However, without specific values for the initial concentration of NOBr or the equilibrium constant (Kc), it's not possible to determine.

.Based on the provided information, it seems that a sample of NOBr was placed in a 1.00 L flask at equilibrium, which means that the NOBr has decomposed into NO and Br2.

At equilibrium, the concentrations of NO, Br2, and NOBr in the flask will remain constant. However, without specific values for the initial concentration of NOBr or the equilibrium constant (Kc), it's not possible to determine the exact concentrations of these substances in the flask.

Visit here to learn more about  equilibrium : https://brainly.com/question/4289021
#SPJ11

A sample of NOBr being placed in a 1.00 L flask containing no NO or Br2 at equilibrium, I'll first provide the balanced chemical equation for the reaction:

[tex]2 NOBr (g) ⇌ 2 NO (g) + Br2 (g)[/tex]

At equilibrium, the concentrations of the reactants and products remain constant. To determine the concentrations of NOBr, NO, and Br2 at equilibrium, we need to follow these steps:

1. Write the expression for the equilibrium constant (Kc) based on the balanced chemical equation:
[tex]Kc = [NO]^2 [Br2] / [NOBr]^2[/tex]

2. Set up an ICE (Initial, Change, Equilibrium) table to determine the equilibrium concentrations of the species involved in the reaction. The initial concentrations of NO and Br2 are 0 since they are not initially present in the flask.

      NOBr      NO      Br2
I      C0        0        0
C     -2x        +2x      +x
E     C0-2x     2x       x

3. Substitute the equilibrium concentrations from the ICE table into the Kc expression:
[tex]Kc = (2x)^2 * x / (C0-2x)^2[/tex]

4. To solve for x, you need the value of Kc for the reaction. Look up the Kc value for this reaction in a reference or use provided information. Once you have Kc, substitute it into the equation and solve for x.

5. Calculate the equilibrium concentrations of NOBr, NO, and Br2 by substituting the value of x back into the ICE table:

[NOBr] = C0-2x
[NO] = 2x
[Br2] = x

By following these steps, you can determine the concentrations of NOBr, NO, and Br2 in the 1.00 L flask at equilibrium.

To know more about equilibrium constant (Kc):

https://brainly.com/question/29260433

#SPJ11

The statement is correct. Producers of addictive substances, for which demand is inelastic, can pass higher costs on to consumers.

Inelastic demand refers to a situation where changes in price have little effect on the quantity demanded of a product. Addictive substances, such as tobacco or drugs, often have inelastic demand because users are willing to pay high prices for the product regardless of changes in price.

Producers of addictive substances can take advantage of this inelastic demand by increasing prices without seeing a significant decrease in demand. This means that they can pass on any higher costs, such as increased taxes or production costs, to the consumers, who are likely to continue purchasing the product even at a higher price.

This is often seen in the tobacco industry, where governments may increase taxes on cigarettes as a way to discourage smoking, but the tobacco companies can simply pass on the higher costs to consumers who continue to buy the product.

Therefore, it can be concluded that producers of addictive substances, for which demand is inelastic, can pass higher costs on to consumers.

To learn more about addictive substances, here

https://brainly.com/question/15085682

#SPJ4

The pressure of gas is 1.05 atm when a 1.25 g sample of CO₂ is contained in a 750ml flask at 22.5°C.

Molecular weight of CO₂ is 1.25g ,Volume of CO₂ is 750ml,Temperature of CO₂ is 22.5°C and the gas constant is 0.08206 L atm/mol K.

Using the ideal gas law equation the pressure is found to be 1.05 atm.

To calculate the pressure of the gas, we can use the ideal gas law equation: [tex]PV=nRT[/tex]
Where P is the pressure, V is the volume, n is the number of moles, R is the gas constant, and T is the temperature in Kelvin.
First, we need to convert the volume to liters by dividing by 1000: 750 ml = 0.75 L.
Next, we need to calculate the number of moles of CO₂ present in the flask. We can use the molecular weight of CO₂ to convert from grams to moles:

[tex]1.25 * (1 /44.01 ) = 0.0284 mol[/tex]
Now we can plug in the values into the ideal gas law equation:

[tex]PV=nRT[/tex]
[tex]P * 0.75 L = 0.0284 mol  * 0.08206 L*atm/mol*K * (22.5 + 273.15) K[/tex]
Simplifying and solving for P, we get:
[tex]P = (0.0284 * 0.08206 * 295.65) / 0.75 = 1.05 atm[/tex]
Therefore, the pressure of the gas in the flask is 1.05 atm.

Learn more about ideal gas law equation here:

https://brainly.com/question/15379358

#SPJ11

We are given that 1 drop of 0.25 M HCl is added to 3 mL of water, and we need to find the concentration of H+ ions and the pH of the solution is  2.39

First, let's determine the volume of the HCl solution in the mixture. Since 1 drop of acid is equal to 50 microliters, we have 50 microliters = 0.05 mL

Now, let's find the total volume of the mixture (HCl + water):
0.05 mL (HCl) + 3 mL (water) = 3.05 mL

Next, we need to calculate the moles of H+ ions from the HCl solution. We know that the concentration of the HCl solution is 0.25 M, so:
moles of H+ = (0.25 mol/L) × (0.05 L/1000) = 0.0000125 mol

To find the concentration of H+ ions in the mixture, we divide the moles of H+ by the total volume of the mixture:
[H+] = (0.0000125 mol) / (3.05 L/1000) = 0.004098 mol/L

Now we can calculate the pH of the solution using the formula:
pH = -log10[H+]
pH = -log10(0.004098) ≈ 2.39

The pH of the solution is approximately 2.39 after adding 1 drop of 0.25 M HCl to 3 mL of water.

The Question was Incomplete, Find the full content below :

Please show explanation: If 1 drop of acid is equal to 50 microliter. Calculate the concentration of H+ ion and the pH of the solution when 1 drop of 0.25 M HCl is added to 3 mL water?

Know more about  concentration here:

https://brainly.com/question/17206790

#SPJ11  

The value of Ksp for PbI2 is 4.05 × 10^-8 if the molar solubility of PBI 2 is 1.5 × 10 −3 m.

The molar solubility of PBI 2 = 1.5 × 10 −3 m

The solubility product constant  = 2 .4.5 x 10 -6

The solubility product constant (Ksp) for PbI2 can be estimated using the molar solubility of PbI2, the stoichiometry of the equilibrium equation is:

[tex]PbI2(s) = Pb2+(aq) + 2I-(aq)[/tex]

The equation for Ksp is:

Ksp = [tex][Pb2+][I-]^2[/tex]

[Pb2+] = S = 1.5 × 10−3 M,

[I-] = 2S = 3 × 10−3 M

The stoichiometric coefficient of I- is 2. Substituting these values into the Ksp equation we get:

Ksp =[tex](1.5 × 10^-3) × (3 × 10^-3)^2[/tex]

Ksp = 4.05 × 10^-8

Therefore, we can conclude that the value of Ksp for PbI2 is 4.05 × 10^-8.

To learn more about Molar Solubility

https://brainly.com/question/31479331

#SPJ4

The value of Ksp for PbI2 is 3.375 × 10^-9 or 4.5 x 10 -6. The expression for the solubility product constant (Ksp) of a sparingly soluble salt such as PbI2 is: Ksp = [Pb2+][I-]^2

where [Pb2+] and [I-] are the molar concentrations of the lead ion and iodide ion, respectively, in a saturated solution of PbI2.

Given that the molar solubility of PbI2 is 1.5 × 10^-3 M, we can assume that [Pb2+] and [I-] in the saturated solution are also equal to 1.5 × 10^-3 M. Therefore, we can substitute these values into the Ksp expression and solve for Ksp:

Ksp = (1.5 × 10^-3 M)(1.5 × 10^-3 M)^2
Ksp = 3.375 × 10^-9

So the value of Ksp for PbI2 is 3.375 × 10^-9 or 4.5 x 10 -6 (if that was a typo in the question).

Learn more about soluble salt here: brainly.com/question/9537918

#SPJ11

The theoretical yield of phenacetin is 0.17922 g. However, the actual yield may be lower due to factors such as incomplete reaction, loss during purification, or experimental error.

To calculate the theoretical yield of phenacetin, we need to first determine the limiting reagent. The limiting reagent is the reactant that will be completely consumed in the reaction, thus limiting the amount of product that can be produced.

First, we need to convert the volume of bromoethane given in milliliters to grams, using its density:

0.12 ml x 1.47 g/ml = 0.1764 g bromoethane

Next, we can use the molar masses of p-acetamidophenol and bromoethane to determine the number of moles of each:

moles p-acetamidophenol = 0.151 g / 151.16 g/mol = 0.001 mol

moles bromoethane = 0.1764 g / 108.97 g/mol = 0.00162 mol

Since the reaction requires a 1:1 molar ratio of p-acetamidophenol to bromoethane, and the number of moles of p-acetamidophenol is smaller than the number of moles of bromoethane, p-acetamidophenol is the limiting reagent.

The theoretical yield of phenacetin can be calculated using the molar mass of phenacetin and the number of moles of p-acetamidophenol:

moles phenacetin = 0.001 mol p-acetamidophenol

mass phenacetin = 0.001 mol x 179.22 g/mol = 0.17922 g

For such more questions on Phenacetin:

https://brainly.com/question/29460577

#SPJ11

In a reaction between an acid chloride and a primary alkyl chloride with a nucleophile, the acid chloride is generally more reactive than the primary alkyl chloride due to the presence of the electron-withdrawing carbonyl group in the acid chloride.

For example, if we react an acid chloride like acetyl chloride (CH3COCl) with a nucleophile like water (H2O), we get the following reaction:

CH3COCl + H2O → CH3COOH + HCl

In this reaction, the acetyl chloride reacts with water to form acetic acid (CH3COOH) and hydrochloric acid (HCl) as a byproduct. This reaction is an example of an acyl substitution reaction, where the nucleophile (water) substitutes the leaving group (chloride) on the acid chloride.

On the other hand, if we react a primary alkyl chloride like ethyl chloride (CH3CH2Cl) with water (H2O), we get the following reaction:

CH3CH2Cl + H2O → CH3CH2OH + HCl

In this reaction, the ethyl chloride reacts with water to form ethanol (CH3CH2OH) and hydrochloric acid (HCl) as a byproduct. This reaction is an example of a nucleophilic substitution reaction, where the nucleophile (water) substitutes the leaving group (chloride) on the primary alkyl chloride.

The rate of reaction for the acyl substitution reaction with the acid chloride is generally faster than the rate of reaction for the nucleophilic substitution reaction with the primary alkyl chloride, indicating the greater reactivity of the acid chloride.

Visit to know more about Carbonyl group:-

brainly.com/question/13564853

#SPJ11

The statement "acetaldehyde produced during alcohol metabolism is highly toxic" is true about absorption and metabolism of alcohol. Option 4 is correct.

Acetaldehyde is a byproduct of alcohol metabolism, and it is a toxic substance that can cause various symptoms such as facial flushing, nausea, and headache. Acetaldehyde is rapidly converted to acetate by the enzyme aldehyde dehydrogenase, which is then metabolized further to carbon dioxide and water.

However, if alcohol is consumed at a high rate, the liver may not be able to metabolize all of the acetaldehyde, leading to a buildup of this toxic substance in the body. This can result in more severe symptoms such as vomiting, rapid heartbeat, and difficulty breathing. Therefore, it is important to consume alcohol in moderation and allow enough time for the liver to metabolize the alcohol and its byproducts. Hence Option 4 is correct.

To learn more about absorption and metabolism of alcohol, here

https://brainly.com/question/14310421

#SPJ4

The pressure would be 28.75 atm if the volume is changed from 5 L to 1 L, starting from an initial pressure of 5.75 atm.

To solve this problem, we can use the combined gas law equation, which relates the pressure, volume, and temperature of a gas:

P1V1/T1 = P2V2/T2

where P1 and V1 are the initial pressure and volume, T1 is the initial temperature, P2 and V2 are the final pressure and volume, and T2 is the final temperature. Since the temperature is constant in this problem, we can simplify the equation to:

P1V1 = P2V2

Substituting the given values, we get:

5.75 atm × 5 L = P2 × 1 L

Solving for P2, we get:

P2 = (5.75 atm × 5 L) / 1 L = 28.75 atm.

For such more questions on Pressure:

https://brainly.com/question/24719118

#SPJ11

The energy of the photon needed to cause an electron in the 3s orbital to be excited to the 3p orbital is approximately 3.04 × [tex]10^{-18}[/tex] J (or about 1.90 eV).

To calculate the energy of a photon needed to cause an electron in the 3s orbital to be excited to the 3p orbital, we need to know the energy difference between these two orbitals.

The energy of an electron in a hydrogenic atom (an atom with one electron) can be calculated using the following formula:

[tex]E = - (Z^2 * Ry) / n^2[/tex]

where Z is the atomic number, Ry is the Rydberg constant (2.18 × [tex]10^{-18}[/tex]J), and n is the principal quantum number.

The energy difference between the 3s and 3p orbitals can be calculated by subtracting the energy of the 3s orbital from the energy of the 3p orbital.

For hydrogen, the energy of the 3s orbital is:

E(3s) = - ([tex]1^2[/tex]* 2.18 × [tex]10^{18}[/tex] J) / [tex]3^2[/tex]

E(3s) = - 0.242 ×[tex]10^{18}[/tex] J

And the energy of the 3p orbital is:

E(3p) = - ([tex]1^2[/tex] * 2.18 × [tex]10^{-18}[/tex] J) / 2^2

E(3p) = - 0.546 × [tex]10^{-18}[/tex] J

The energy difference between the two orbitals is:

ΔE = E(3p) - E(3s)

ΔE = (- 0.546 ×[tex]10^{18}[/tex]  J) - (- 0.242 ×[tex]10^{-18}[/tex] J)

ΔE = - 0.304 × [tex]10^{-18}[/tex]J

This energy difference represents the energy required to excite an electron from the 3s orbital to the 3p orbital.

To calculate the energy of the photon needed to provide this energy, we use the formula:

E = hν

where E is the energy of the photon, h is Planck's constant (6.626 × [tex]10^{-34}[/tex]J·s), and ν is the frequency of the photon.

Rearranging this formula to solve for the frequency of the photon, we get:

ν = E / h

Substituting the energy difference we calculated, we get:

ν = (- 0.304 × [tex]10^{18}[/tex] J) / (6.626 × [tex]10^{-34}[/tex] J·s)

ν = - 4.59 × [tex]10^{15}[/tex]Hz

Finally, to calculate the energy of the photon, we use the formula:

E = hν

Substituting the frequency we calculated, we get:

E = (6.626 ×[tex]10^{-34}[/tex] J·s) x (- 4.59 × [tex]10^{15}[/tex] Hz)

E = - 3.04 × [tex]10^{-18}[/tex]J

Therefore, the energy of the photon needed to cause an electron in the 3s orbital to be excited to the 3p orbital is approximately 3.04 × 10^-18 J (or about 1.90 eV).

Learn more about photon

https://brainly.com/question/20912241

#SPJ4

The formation of ions is an essential process in chemistry and is involved in many chemical reactions and compounds.

Atoms are composed of protons, neutrons, and electrons. The number of protons in an atom determines its atomic number and the element it represents. The electrons in an atom occupy different energy levels or shells, and these electrons participate in chemical reactions. The outermost shell of electrons, called the valence shell, is particularly important in chemical reactions because it determines the chemical properties of the atom.

When an atom gains or loses electrons, it becomes charged and is called an ion. The process of gaining or losing electrons is called ionization. When an atom loses one or more electrons, it becomes a positively charged ion called a cation. Cations have a smaller number of electrons than protons and have a net positive charge. For example, when the element sodium (Na) loses one electron, it becomes a sodium ion (Na+).

On the other hand, when an atom gains one or more electrons, it becomes a negatively charged ion called an anion. Anions have a larger number of electrons than protons and have a net negative charge. For example, when the element chlorine (Cl) gains one electron, it becomes a chloride ion (Cl-).

The formation of ions is a fundamental process in many chemical reactions. Ions can combine with each other to form ionic compounds, which are compounds composed of ions held together by electrostatic forces. For example, sodium ions (Na+) and chloride ions (Cl-) can combine to form sodium chloride (NaCl), which is common table salt.

Overall, the formation of ions is an essential process in chemistry and is involved in many chemical reactions and compounds.

Visit to know more about Compound:-

brainly.com/question/26487468

#SPJ11

9 pennies contain approximately [tex]2.13 x 10^23[/tex] atoms of copper.

To solve this problem, we need to use the following steps:

Determine the molar mass of copper.

Convert the mass of 9 pennies from grams to moles.

Use Avogadro's number to calculate the number of atoms of copper.

Step 1: The molar mass of copper (Cu) is approximately 63.55 g/mol.

Step 2: The mass of 9 pennies is:

9 pennies x 2.5 g/penny = 22.5 g

Converting this mass to moles, we get:

22.5 g / 63.55 g/mol = 0.354 moles

Step 3: Using Avogadro's number ([tex]6.022 x 10^23 atoms/mol)[/tex], we can calculate the number of atoms of copper:

Therefore, 9 pennies contain approximately[tex]2.13 x 10^23 a[/tex]toms of copper.

Learn more about molar mass

https://brainly.com/question/22997914

#SPJ4

1) 5.1167 x 10²⁴atoms of chlorine. 2) 248.00 g. 3) 4.8825 x 10⁷ moles of helium. 4) 2.7757 x 10²⁴ atoms of sulfur.  5) Molar mass of Co (cobalt) is 58.93 g/mol.  6) Formula mass =  310.18 g/mol.

Sum of the atomic masses of all the atoms in chemical formula is called formula mass

1.)  Number of atoms = 8.500 moles x 6.022 x 10²³ atoms/mole = 5.1167 x 10²⁴ atoms of chlorine.

2.) Molar mass of oxygen is 16.00 g/mol. Therefore:

Mass of 15.50 moles of oxygen = 15.50 moles x 16.00 g/mol = 248.00 g.

3.) Molar mass of helium is 4.00 g/mol. Therefore, the number of moles of helium in 1.953 x 10⁸ g is:

Number of moles = 1.953 x 10⁸ g / 4.00 g/mol = 4.8825 x 10⁷ moles of helium.

4.) Molar mass of sulfur is 32.06 g/mol. Therefore, the number of moles of sulfur in 147.82 g is:

Number of moles = 147.82 g / 32.06 g/mol = 4.6084 moles of sulfur.

To find the number of atoms, we can use Avogadro's number again:

Number of atoms = 4.6084 moles x 6.022 x 10²³ atoms/mole = 2.7757 x 10²⁴ atoms of sulfur.

5.) Molar mass of Co (cobalt) is 58.93 g/mol.

6.) Ca₃(PO₄)₂ contains 3 calcium atoms, 2 phosphorus atoms, and 8 oxygen atoms.

Atomic masses of these elements are:

Calcium (Ca) = 40.08 g/mol

Phosphorus (P) = 30.97 g/mol

Oxygen (O) = 16.00 g/mol

Therefore, formula mass of Ca₃(PO₄)₂ is:

Formula mass = (3 x 40.08 g/mol) + (2 x 30.97 g/mol) + (8 x 16.00 g/mol)

= 120.24 g/mol + 61.94 g/mol + 128.00 g/mol

= 310.18 g/mol.

To know more about formula mass, refer

https://brainly.com/question/21334167

#SPJ1

Answer:

data given

mass of NaCl 4.56

dissolved volume 20ml(0.02l)

density of solution 1.03g/ml

Required molality

Explanation:

molarity=m/mr×v

where

m is mass

mr molar mass

v is volume

now,

molarity=4.56/58.5×0.02

molarity =3.9

: .molarity is 3.9mol/dm^3

According to molal concentration, the concentration (in molality) of an aqueous solution of NaCl is 0.0047 mole/kg.

Molal concentration is defined as a measure by which concentration of chemical substances present in a solution are determined. It is defined in particular reference to solute concentration in a solution . Most commonly used unit for molal concentration is moles/kg.

The molal concentration depends on change in volume of the solution which is mainly due to thermal expansion. Molal concentration is calculated by the formula, molal concentration=mass/ molar mass ×1/mass of solvent in kg.

In terms of moles, it's formula is given as molal concentration= number of moles /mass of solvent in kg.

Substitution in formula gives the answer but first mass of solution is determined which  is density×volume= 1.03×20=20.6 g , mass of solvent= 20.6-4.56=16.05, thus molal concentration=4.56/58.5×1/16.05=0.0047 moles/kg.

Learn more about molal concentration,here:

https://brainly.com/question/4580605

#SPJ2

The moles of NaF that must be dissolved in 1.00 liter of a saturated solution of PbF₂ at 25˚C to reduce the [Pb²⁺] to 1 x 10⁻⁶ molar is 2.0 x 10⁻⁵.

The solubility product expression for PbF₂ is given by:

At equilibrium, the product of the ion concentrations must be equal to the solubility product constant. We are given that the [Pb²⁺] in the saturated solution is 1 x 10⁻⁶ M. Therefore, we can use the Ksp expression to calculate the concentration of F- in the solution:

Now, we can calculate the amount of NaF needed to reduce the [F⁻] concentration to 2.0 x 10⁻¹ M. Since NaF is a 1:1 electrolyte, the concentration of F- will be equal to the concentration of NaF added.

However, we need to dissolve this amount of NaF in a saturated solution of PbF₂. Therefore, we need to check that the amount of NaF we added will not exceed the maximum amount that can dissolve in the solution at 25˚C.

To learn more about solubility, here

https://brainly.com/question/29661360

#SPJ4

23 grams of water at 95°C can lose a maximum of 8883.64 Joules of heat before freezing completely.

To answer your question, we need to calculate the heat loss required to lower the temperature of 23 grams of water from 95 degrees Celsius to 0 degrees Celsius, which is the freezing point of water. The specific heat capacity of water is 4.184 Joules per gram per degree Celsius.

So, the initial energy of the water is:

E1 = m x c x ΔT
E1 = 23 g x 4.184 J/g°C x (95°C - 0°C)
E1 = 8883.64 J

Where E1 is the initial energy of the water, m is the mass of water, c is the specific heat capacity of water, and ΔT is the change in temperature.

The final energy of the water at 0°C is:

E2 = m x c x ΔT
E2 = 23 g x 4.184 J/g°C x (0°C - 0°C)
E2 = 0 J

So, the maximum amount of heat in joules that 23 grams of water at 95°C can lose before freezing completely is:

ΔE = E1 - E2
ΔE = 8883.64 J - 0 J
ΔE = 8883.64 J

Learn more about joules here: brainly.com/question/25982371

#SPJ11