Answer:
real world examples
Explanation:
concave wave rock- The wave rock is formed by weathering of the surrounding area, which helps in proving the deposition part, as the wave rock was below the ground, occurred due to deposition of rock years over years. It is made from very tough material from its surrounding. The weathering reduced the surrounding terrain, while the bedrock remained to witness for the history. --Also, volcanic eruptions have changed earth greatly. EX- Ash and sulfur went into Earth's atmosphere because of the Tambora eruption which dimmed incoming sunlight. It lowered global temperatures by about 3°F. The Mount Pinatubo of 1991 that erupted in the Philippines cooled the planet by about 1°F.
significance of practicals in the discipline of geography
Draw a graph of these results
Answer:
Actually I know but I can't cause it will take time
2. Heather and Matthew walk with an average velocity of +0.87 m/s eastward.
If it takes them 27 minutes to walk to the store, what is their
displacement? (include direction)
(5 points)
1.) There was an earthquake in Salt Lake City, Utah, on March 18, 2020, in the morning at 9 hours, 9 minutes, and 45 seconds Mountain Standard Time (9:9:45 MST). If the velocity of the p-wave is 7.3 km/sec and the velocity of the s-wave is 5.1 km/sec and the s-p time lag is 16 seconds, what is the distance in kilometers from Salt Lake City to the focus of the earthquake? Explain how you calculated the answer.
Answer:
7 because salt lake and Southis weat
Catching a wave, a 77 kg surfer starts with a speed of 1.3 m/s, drops through a height of 1.65 m, and ends with a speed of 8.2 m/s. How much non-conservative work was done on the surfer?
Answer:
Explanation:
The total work done by the wave is expressed as;
Workdone = Potential energy + Kinetic energy
Workdone = mgh + 1/2mv²
m is the mass = 77kg
g is the acceleration due to gravity = 9.8m/s²
v is the velocity = 8.2m/s
h is the height = 1.65m
Substitute into the formula;
Workdone = 77(9.8)(1.65) + 1/2(77)8.2²
Workdone = 1245.09 + 2588.74
Workdone = 3833.83Joules
Hence the amount of non conservative work done on the sofa is 3833.83Joules
Given:
Velocity, v = 8.2 m/sHeight, h = 1.65 mMass, m = 77 kgWe know,
→ [tex]Work \ done = Potential \ energy +Kinetic \ energy[/tex]
or,
[tex]= mgh +\frac{1}{2} mv^2[/tex]
By putting the values,
[tex]= 77\times 9.8\times 1.65+\frac{1}{2}\times 77\times (8.2)^2[/tex]
[tex]= 1245.09+2588.74[/tex]
[tex]= 3833.83 \ Joules[/tex]
Thus the above approach is right.
Learn more about work done here:
https://brainly.com/question/24230840
Can someone help plzzzzzzz I need it ASAP thank you
Answer:
Explanation:
Frequency is oscillations per second.
So we have to find the Number of seconds she paced.
2 minutes = 2 X 60
= 120 seconds
Therefore,
Her frequency = 10 / 120
= 1/12 Hertz
The second-order dark fringe in a single-slit diffraction pattern is 1.40 mm from the center of the central maximum. Assuming the screen is 89.0 cm from a slit of width 0.710 mm and assuming monochromatic incident light, calculate the wavelength of the incident light.
We know, for single slit :
[tex]y =\dfrac{ n\lambda L}{a}\\\\\lambda = \dfrac{ya}{nL}[/tex] ...1)
[tex]y = 1.4\ mm = 1.4 \times 10^{-3}\ m[/tex]
n = 2
L = 89 cm = 0.89 m
[tex]a=7.1\times 10^{-4}\ m[/tex]
Putting all these in equation 1), we get :
[tex]\lambda = \dfrac{ya}{nL}\\\\\lambda = \dfrac{1.4\times 10^{-3}\times 7.1\times 10^{-4}}{2\times 0.89 }\\\\\lambda = 5.584 \times 10^{-7}\ m[/tex]
Therefore, wavelength of the incident light is [tex]5.584 \times 10^{-7}\ m[/tex] or 558.4 nm.
Hence, this is the required solution.
A group of students collected the data shown below while attempting to measure the coefficient of static friction (of course, it looks like this group varied the amount of mass sitting on the block with each trial - this is not recommended). Nonetheless, what is their average coefficient of static friction?
Trial Mass of block (g) Hanging mass (kg)
1 105 0.053
2 165 0.081
3 220 0.118
4 280 0.149
5 315 0.180
6 385 0.198
Answer:
0.130
Explanation:
From the given data, the coefficient of static friction for each trial are:
1. 0.053
2. 0.081
3. 0.118
4. 0.149
5. 0.180
6. 0.198
The sum of the coefficient of static friction = 0.053 + 0.081 + 0.118 + 0.149 + 0.180 + 0.198
= 0.779
So that;
the average coefficient of static friction = [tex]\frac{sum of coefficient of static friction}{number of trials}[/tex]
= [tex]\frac{0.779}{6}[/tex]
= 0.12983
The average coefficient of static friction is 0.130
The average coefficient of static friction is 0.13.
The coefficient of static friction is obtained using the formula; μ = F/R
Where;
F = force acting on the body
R = reaction
μ = coefficient of static friction
The average of measurements is given as; ∑summation of measurements/number of measurements
We can see from the question that there were 6 measurements of the coefficient of static friction. Hence, the average coefficient of static friction is obtained from;
0.053 + 0.081 + 0.118 + 0.149 + 0.180 + 0.198/6
= 0.13
The average coefficient of static friction is 0.13
Learn more: https://brainly.com/question/8155254
In ultimate the disc may be passed in any direction.
True
False
I think is True: Because...
when you throw a disc you can throw it in any direction, many people call it "Flying Saucer" I'll give you an example ... When you throw something, for example a paper, you want to throw it at your classmate. You already know what address you want to send it to, then I say it is: True ...
Sorry if it's wrong :(
Assume you are in the car and the car is moving at a certain speed to
school. Are you at rest or in motion with respect to the school? With
respect to the car?
A force F = (2xî + 4yĵ), where F is in newtons and x and y are in meters, acts on an object as the object moves in the x-direction from the origin to x = 4.99 m. Find the work W = ∫ F · dr done by the force on the object (in J).
Answer:
Work done, W = 24.9001 J
Explanation:
Given that,
Force, F = (2xî + 4yĵ) Where x and y are in meters
This force acts on an object as the object moves in the x-direction from the origin to x = 4.99 m.
We need to find the work done by the force on the object. It is given by :
[tex]W=\int\limits^a_b {F dr} \\\\W=\int\limits^{4.99}_0 {(2xi+4yj)dx} \\\\W=\int\limits^{4.99}_0 {2xi\ dx} \\\\W=x^2|_0^{4.99}\\\\\text{Applying limits}\\\\W=(4.99)^2-0^2\\\\W=24.9001\ J[/tex]
So, the work done is 24.9001 J.
Objects are lighter on the moon than they are on earth. if an object A weighs 25lbs on the Moon and another object B weighs 25 Newtons on earth, which has more mass?
a. Object a
b. Object b
c. Same mass
d. Other
Answer:
a. Object A
Explanation:
The mass of an object implies the quantity of matter in it, while the weight is the amount of gravitational force applied on an object.
The object A has a mass of 25 lbs, but object B on the earth has a weight, W, of 25 N.
So that,
For object A on the moon, mass = 25 lbs
For object B on the earth, W = 25 N,
W = m x g
25 = m x 10 (g = 10 m/[tex]s^{2}[/tex])
m = [tex]\frac{25}{10}[/tex]
= 2.5 lbs
Mass of object B is 2.5 lbs.
Therefore, the mass of the object A is more than that of B.
from a flying aeroplane abody should be dropped in advance to hit the target why
From a flying plane a body should dropped in advance to hit the target,Why? ... The body should be dropped in advance as when the body is dropped it has the velocity of the plane. So, in air the body moves forward which we have to take into consideration in order to hit the target.
A physicist's left eye is myopic (i.e., nearsighted). This eye can see clearly only out to a distance of 35 cm.Find the focal length and the power of a lens that will correct this myopia when worn 2.0 cm in front of the eye.
Answer:
Explanation:
To get the focal length, we will use the lens formula;
1/f = 1/u + 1/v
f is the focal length
u is the object distance
v is the image distance
Given
since the physicist's left eye is myopic, it will be corrected using concave lens and the image distance is negative.
u = 35cm
v = -2.0
1/f = 1/35-1/2
1/f = 2-35/70
1/f = -33/70
f = -70/33
f = -2.12 cm
f = -0.0212m
Power of a lend is the reciprocal of its focal length
Power of the lens = 1/f
P = 1/-0.0212
P = -47.17dioptres
The power of the lens is -47.17D
i need this ASAP please!!!
What is the significance of the discovery of exoplanets?
a. they may possibly be inhabited or harbor life.
b. they can provide natural resources for the future.
c. they help our understanding of the formation of planetary bodies.
d. they help calibrate gps satellites.
e. they help understand the nature of the expansion of the universe.
Answer:
C. the help our understanding of the formation of planetary bodies.
Explanation:
this is the answer of PLATO
"She finished the sprint with the speed of a cheetah." This statement represents which of the
following functions of language? (2 points)
correct answer is poetic.
Answer:
Poetic
Explanation:
I took the test
Answer:
Poetic
Explanation:
I got it right on the test
Some vitamins can not be stored in the body and so they must be replenished by intake on a regular basis. Which of the following is not true about these vitamins?
1 they are water-soluble
2 they need to be taken daily
3 they are fat-soluble
4 They include vitamin C and the B complex vitamins.
Answer:
Explanation:
3
A large bottle contains number medical tablets each having a mass of 250
mg.The mass of all tablets is 1kg.Calculate the number of tablets in the
bottle.
First of all, this isn't physics. But, here's the answer:
1 gram is a 1000 milligram and 250 milligram is 250 * 0.001 g which is 0.25 gram.
Since 1 kg is 1000 g, we divide 1000 by 0.25 and we get 1000 * 4 which is 4000.
There are [tex]4000[/tex] tablets inside the bottle.
A 2.0 cm thick brass plate (k_r = 105 W/K-m) is sealed to a glass sheet (kg = 0.80 W/K m), and both have the same area. The exposed face of the brass plate is at 80°C, while the exposed face of the glass is at 20 °C. How thick is the glass if the glass brass interface is at 65 C? Ans. 0.46 mm
Help me with this please !!
Pt 1_It would be harder to do experiments on or near jupiter for many reasons ! One being that jupiters top layers are known to be gas. However if we could hover over Jupiter and test its gravity, describe or sketch the shape of the position vs time graph for a dropped object.
PT2_ The acceleration due to gravity near Jupiter is 25.95m/s. If a hammer were dropped, how fast wouldit be going after falling 20.0 meters. Show your work !
Answer:
he is right he Is
Explanation:
step by step explanation
C4. A 50.0 kg boy runs at 10.0 m/s, jumps on a cart and rolls off at 2.50 m/s. What is the mass of the cart
Answer:
The mass of the cart is 150 kg.
Explanation:
Given that,
Mass of a boy, m₁ = 50 kg
Initial speed of boy, u₁ = 10 m/s
Initial speed of car, u₂ = 0 (at rest)
The speed of the cart with the boy on it is 2.50 m/s, V = 2.5 m/s
Let m₂ is the mass of the cart. Using the conservation of momentum as follows :
[tex]m_1u_1+m_2u_2=(m_1+m_2)V\\\\50(10)+m_2(0)=(50+m_2)(2.5)\\\\500=125+2.5m_2\\\\375=2.5m_2\\\\m_2=150\ kg[/tex]
So, the mass of the cart is 150 kg.
Once a player catches the Frisbee they are only allowed to pivot like in
basketball.
True
False
The CERN particle accelerator is circular with a circumference of 7.0 km.
Required:
a. What is the acceleration of the protons (m=1.67×10^−27kg) that move around the accelerator at of the speed of light? (The speed of light is v=3.00×10^8m/s.)
b. What is the force on the protons?
Answer:
Explanation:
a) centripetal acceleration is the acceleration of a body in a circular path. It is expressed as;
a = mv²/r
m is the mass of proton = 1.67×10^−27kg
v is the velocity = 3.00×10^8m/s
r is the radius
Since C = 2πr
7000m = 2πr
r = 7000/2π
r = 1114.08m
Substitute
a = 1.67×10^−27 (3.00×10^8)²/1114.08
a = 1.67×10^−27 * 9×10^16/1114.08
a = 15.03*10^-11/1114.08
a = 0.001346*10^-11
a = 1.346*10^-14m/s²
b) Force on the proton = mass * acceleration
Force = 1.67×10^−27kg * 1.346*10^-14
Force = 2.246*10^-41N
hence the force on the proton is 2.246*10^-41N
A freight train has a mass of 3.8 x 10^7 kg. The locomotive can exert a force of 6.5 x 10^5 N to pull the train.
Required:
a. How long does it take the train to go from rest to 50 km/hr?
b. If there is air resistance of 2.0 x 10^5 N, what is the acceleration of the train, and how long does it take the train to go from rest to 50 km/hr?
Answer:
(a) The time taken for the plane to reach 50 km/hr is 811.97 s
(b) (i) the acceleration of the plane is 0.012 m/s²
(ii) The time taken for the plane to reach 50 km/hr is 1172.85 s
Explanation:
Given;
mass of the freight train, m = 3.8 x 10⁷ kg
force applied to pull the train, F = 6.5 x 10⁵ N
a. How long does it take the train to go from rest to 50 km/hr?
Given;
initial velocity, u = 0
final velocity, v = 50 km/hr = 13.889 m/s
Apply Newton's second law of motion to determine the time traveled by the train at the given speed;
[tex]F = ma = \frac{m(v-u)}{t}\\\\t = \frac{m(v-u)}{F}\\\\t = \frac{3.8*10^7(13.889-0)}{6.5*10^5}\\\\t = 811.97 \ s[/tex]
(b)
(i) the acceleration of the plane
Given;
air resistance, = 2.0 x 10⁵ N
Apply Newton's second law of motion;
∑F = ma
6.5 x 10⁵ N - 2.0 x 10⁵ N = ma
4.5 x 10⁵ N = ma
[tex]a = \frac{4.5 * 10^5 }{m}\\\\a = \frac{4.5 * 10^5 }{3.8*10^7}\\\\a = 0.012 \ m/s^2[/tex]
(ii) time taken for the plane to reach 50 km/hr is given by;
[tex]F = \frac{m(v-u)}{t}\\\\t = \frac{m(v-u)}{F}\\\\t = \frac{3.8*10^7(13.889-0)}{4.5*10^5}\\\\t = 1172.85 \ s[/tex]
An amateur golfer swings a golf club, striking a golf ball that has a mass of 55.0 g. The club is in contact with the ball for only 0.00360 s. After the collision, the ball leaves the club at a speed of 34.0 m/s. What is the magnitude of the average force (in N) exerted on the ball by the club?
Answer:
The average force ≅ 519.44 N.
Explanation:
Impulse = change in momentum of a body
i.e Ft = m(v - u)
where F is the force, t is the time, m is the mass of the body, v is the final velocity and u is the initial velocity.
m = 55.0 g (0.055 Kg), t = 0.00360 s, v = 34.0 m/s, since the ball was initially at rest; u = 0 m/s
So that,
F x 0.00360 = 0.055(34 - 0)
F x 0.00360 = 0.055 x 34
= 1.87
F = [tex]\frac{1.87}{0.0036}[/tex]
= 519.4444
The average force exerted on the ball by the club is approximately 519.44 N.
A pasta factory made 3.84 pounds of pasta in 4 minutes. How much pasta did the factory make in each minute? plzz help me
[tex]{\underline{\green{\textsf{\textbf{ Answer : }}}}}[/tex]
➡ 0.96 pounds in a minute.
what is the state of y when y = k/x, x is halved.
Answer:
y becomes doubled.
Explanation:
If;
y = [tex]\frac{k}{x}[/tex]
what is the state of y when x is halved;
the given expression is an inverse relationship. When y increases, x is supposed to decrease and vice versa.
if x is halved; x = [tex]\frac{x}{2}[/tex]
[tex]\frac{k}{\frac{x}{2} }[/tex] = [tex]\frac{2k}{x}[/tex]
Now compare :
[tex]\frac{k}{x}[/tex] : [tex]\frac{2k}{x}[/tex]
we see that y becomes doubled
we feel cold in winter when we come out from the quilt but the same room becomes warmer after coming back from outside the room
Answer:
Yes
Explanation:
I think this is because when you go out of the room and going to a hotter room you then get the heat from that room. It then becomes warmer in the room you are coming from because your body got the heat from the outside the room. I think it is because of body temperature.
HOPE THIS HELPED
A golf ball (m=26.7g) is struck a blow that makes an angle of 33.6 degrees with the horizontal. The drive lands 190m away on a flat fairway. The acceleration of gravity is 9.8 m/s^2 . If the golf club and ball are in contact for 7.13 ms, what is the average force of impact?
Answer:
Th average force impact is [tex]F = 168.298 \ N[/tex]
Explanation:
From the question we are told that
The mass of the golf ball is [tex]m_g = 26.7 \ g = 0.0267 \ kg[/tex]
The angle made is [tex]\theta = 33.6 ^o[/tex]
The range of the golf ball is [tex]R = 190 \ m[/tex]
The duration of contact is [tex]\Delta t = 7.13 \ ms = 7.13 *10^{-3} \ s[/tex]
Generally the range of the golf ball is mathematically represented as
[tex]R = \frac{v^2 sin2(\theta)}{g}[/tex]
Here v is the velocity with which the golf club propelled it with, making v the subject
[tex]v = \sqrt{\frac{R * g}{sin 2 (\theta)} }[/tex]
=> [tex]v = \sqrt{\frac{190 * 9.8}{sin 2 (33.6)} }[/tex]
=> [tex]v = 44.94 \ m/s[/tex]
Generally the change in momentum of the golf ball is mathematically represented as
[tex]\Delta p = m * (v - u )[/tex]
here u is the initial velocity of the ball before being stroked and the value is 0 m/s
[tex]\Delta p = 0.0267 * ( 44.94 - 0 )[/tex]
=> [tex]\Delta p = 1.19996 \ kg \cdot m/s[/tex]
Generally the average force of impact is mathematically represented as
[tex]F = \frac{\Delta p }{\Delta t}[/tex]
=> [tex]F = \frac{1.19996 }{7.13 *10^{-3}}[/tex]
=> [tex]F = 168.298 \ N[/tex]
Doing specific exercises to improve a particular area of fitness is called flexibility? True or false
Answer:
True.
Explanation:
Exercises and yoga are important for the individual's health. The exercise makes the individual, fit, healthy and also reduces the chances of the deadly disease in human beings.
Different types of exercise can be performed by the individual. The aerobic exercises increase the amount of oxygen in the body. With the aerobic exercise, the exercise that can increase the strength, flexibility and total fitness must also be included.