Find two algebraic expressions for the area of each figure. First, regard the figure as one large rectangle, and then regard the figure as a sum of four smaller rectangles

Therefore , the solution of the given problem of unitary method comes out to be during the 4-second period, the tram's elevation changed by 3 metres every second.

To complete the assignment, use the iii . -and-true basic technique, the real variables, and any pertinent details gathered from basic and specialised questions. In response, customers might be given another opportunity to sample expression the products. If these changes don't take place, we will miss out on important gains in our knowledge of programmes.

Here,

By dividing the overall elevation change (12 metres) by the total time required (4 seconds),

it is possible to determine the change in the tram's elevation every second. We would then have the average rate of elevation change per second.

=> Elevation change equals 12 metres

=> Total duration: 4 seconds

=>  12 meters / 4 seconds

=> 3 meters/second

As a result, during the 4-second period, the tram's elevation changed by 3 metres every second.

To know more about unitary method  visit:

https://brainly.com/question/28276953

#SPJ1  

The longest segment that would fit inside the cylinder is approximately 9.06 centimeters.

The longest segment that would fit inside the cylinder would be the diagonal of the cylinder's base, which is equal to the diameter of the base. The diameter of the base is equal to twice the radius, so it is 6 cm. Using the Pythagorean theorem, we can find the length of the diagonal:

[tex]diagonal^2 = radius^2 + height^2 \\diagonal^2 = 3^2 + 8^2 \\diagonal^2 = 9 + 64 \\diagonal^2 = 73 \\diagonal = sqrt(73)[/tex]

Therefore, the longest segment that would fit inside the cylinder is approximately 8.54 cm (rounded to the nearest hundredth).
To find the longest segment that would fit inside the cylinder, we need to calculate the length of the space diagonal of the cylinder. This is the distance between two opposite corners of the cylinder, passing through the center. We can use the Pythagorean theorem in 3D for this calculation.

The terms we'll use are:
- Radius (r): 3 cm
- Height (h): 8 cm

To find the space diagonal (d), we can use the following formula:

[tex]d = \sqrt{r^2 + r^2 + h^2}[/tex]
Plug in the values:

[tex]d = \sqrt{((3 cm)^2 + (3 cm)^2 + (8 cm)^2)} d = \sqrt{(9 cm^2 + 9 cm^2 + 64 cm^2)} d = \sqrt{(82 cm^2)}[/tex]
d ≈ 9.06 cm

Learn more about cylinder here:

https://brainly.com/question/23991640

#SPJ11

The longest segment that can fit inside the cylinder is. [tex]$\sqrt{73}$ cm[/tex].

The longest segment that can fit inside a cylinder is a diagonal that connects two opposite vertices of the cylinder.

The length of this diagonal by using the Pythagorean theorem.

Pythagorean theorem or Pythagoras' theorem is a fundamental relation in Euclidean geometry between the three sides of a right triangle.

It states that the area of the square whose side is the hypotenuse (the side opposite the right angle) is equal to the sum of the areas of the squares on the other two sides.

This theorem can be written as an equation relating the lengths of the sides a, b and the hypotenuse c, often called the Pythagorean equation:[1]

[tex]{\displaystyle a^{2}+b^{2}=c^{2}.}[/tex]

The theorem is named for the Greek philosopher Pythagoras, born around 570 BC.

The theorem has been proven numerous times by many different methods – possibly the most for any mathematical theorem.

The proofs are diverse, including both geometric proofs and algebraic proofs, with some dating back thousands of years.

Consider a right triangle with legs equal to the radius.

[tex]$r$[/tex] and the height [tex]$h$[/tex] of the cylinder, and with the diagonal as the hypotenuse.

Then, by the Pythagorean theorem, the length of the diagonal is:

[tex]$\sqrt{r^2 + h^2} = \sqrt{3^2 + 8^2} = \sqrt{73}$[/tex]

For similar questions on cylinder

https://brainly.com/question/23935577

#SPJ11

The resultant value of the given expression x² + 10x + 24 when x = 3 is (C) 63.

A finite collection of symbols that are properly created in line with context-dependent criteria is referred to as an expression, sometimes known as a mathematical expression.

Expressions in writing are made using mathematical operators such as addition, subtraction, multiplication, and division.

For instance, "4 added to 2" will have the mathematical formula 2+4.

So, we have the expression:

= x² + 10x + 24

Now, solve when x = 3 as follows:

= x² + 10x + 24

= 3² + 10(3) + 24

= 9 + 30 + 24

= 63

Therefore, the resultant value of the given expression x² + 10x + 24 when x = 3 is (C) 63.

Know more about expressions here:

https://brainly.com/question/723406

#SPJ1

Correct question:

Evaluate the expression when x = 3.

x² + 10x + 24

a. 81

b. 86

c. 63

d. 60

We need approximately 12 servings of Designer Whey and 2 servings of Muscle Milk to obtain a 7-day supply that provides exactly 262 grams of protein and 54 grams of carbohydrates.

Let x be the number of servings of Designer Whey and y be the number of servings of Muscle Milk needed to obtain a 7-day supply that provides exactly 262 grams of protein and 54 grams of carbohydrates.

From the information given, we know that each serving of Designer Whey provides 20 grams of protein and 3 grams of carbohydrates, and each serving of Muscle Milk provides 16 grams of protein and 9 grams of carbohydrates.

Therefore, we can set up the following system of equations:

20x + 16y = 262

3x + 9y = 54

To solve for x and y, we can use any method of solving a system of equations. For example, we can use substitution:

From the second equation, we can solve for x in terms of y:

x = (54 - 9y)/3 = 18 - 3y

Substituting this into the first equation, we get:

20(18 - 3y) + 16y = 262

Simplifying, we get:

80y = 182

Solving for y, we get:

y = 2.275

Substituting this into the equation x = 18 - 3y, we get:

x = 12.175

To learn more about equations click on,

https://brainly.com/question/29118974

#SPJ4

Answer:

see the images and explanation

Step-by-step explanation:

for the graph:

the domain 0 < x < 5

the range for each functions:

g(x) = 2x + 1

g(x) = y  ,   1 < y < 11

h(x) = 2x + 2 ,  2 < y < 12

The correct statement about scale factor is the radius of the larger can will be 8 inches. (option c).

Let's first consider the dimensions of the small can of tomato paste. We are given that it has a radius of 2 inches and a height of 4 inches. Therefore, its volume can be calculated using the formula for the volume of a cylinder, which is V = πr²h, where V is the volume, r is the radius, and h is the height. Substituting the given values, we get:

V_small = π(2²)(4) = 16π cubic inches

Using these dimensions, we can calculate the volume of the larger can using the same formula:

V_large = π(6²)(12) = 432π cubic inches

Now, let's compare the volumes of the small and large cans. We have:

V_large = 432π cubic inches > 16π cubic inches = V_small

Therefore, we can conclude that the volume of the larger can is greater than the volume of the smaller can. But is it three times greater? Let's compare:

V_large = 432π cubic inches 3

V_small = 3(16π) cubic inches = 48π cubic inches

We see that 432π cubic inches is not equal to 48π cubic inches, so option b) is not correct.

Finally, let's consider the radius of the larger can. We found earlier that it is 6 inches, which is greater than the radius of the smaller can, but it is not 8 inches. Therefore, option c) is correct.

To know more about scale factor here

https://brainly.com/question/30215119

#SPJ4

Complete Question:

A small can of tomato paste has a radius of 2 inches and a height of 4 inches. Suppose the larger, commercial-size can has dimensions that are related by a scale factor of 3. Which of these true?

a) The radius of the larger can will be 5 inches.

b) The volume of the larger can will be 3 times the volume of the smaller can

c) The radius of the larger can will be 8 inches.

d) The volume of the larger can is 3 times the volume of smaller can

Answer:

7,000,000÷2000

= 3,500

Step-by-step explanation:

therefore, each worker makes 3500 bikes per year

To determine if each ordered pair is a point of intersection between the line x - y = 6 and the circle y² - 26 = -x², we need to substitute the values of x and y in both equations and see if they are true for both.

For the ordered pair (1, -5):

x - y = 6 becomes 1 - (-5) = 6, which is true.

y² - 26 = -x² becomes (-5)² - 26 = -(1)², which is false.

Therefore, (1, -5) is not a point of intersection.

For the ordered pair (1, 5):

x - y = 6 becomes 1 - 5 = -4, which is false.

y² - 26 = -x² becomes (5)² - 26 = -(1)², which is true.

Therefore, (1, 5) is a point of intersection.

For the ordered pair (5, -1):

x - y = 6 becomes 5 - (-1) = 6, which is true.

y² - 26 = -x² becomes (-1)² - 26 = -(5)², which is false.

Therefore, (5, -1) is not a point of intersection.

So the answer is:

(1,-5) - No

(1,5) - Yes

(5,-1) - No

to know more about equations

brainly.com/question/29657983

#SPJ1

The psychologist finds that the estimated Cohen's d is  0.32, the t statistic is 2. 83, and r² is 0.073.  Using r² and the extension of Cohen's guidelines for interpreting the effect size using r², there is a small treatment effect.   job seeker finds that the estimated Cohen's d is 0.88, the t statistic is 7. 78, and r² is 0.479.Using r² and the extension of Cohen's guidelines for interpreting the effect size with r², there is a large treatment effect

To calculate the estimated Cohen's d, we use the formula

d = (M - M0) / SD

where M is the mean of the treatment group (job seekers who received training on using the Internet to find job listings), M0 is the mean of the control group (typical job seeker), and SD is the pooled standard deviation of the two groups. Using the given values, we have

M = 8.7 months

M0 = 7.4 months

SD = 4.1 months

So, d = (8.7 - 7.4) / 4.1 = 0.32

Using Cohen's guidelines for interpreting effect size with Cohen's d, a value of 0.2 is considered a small effect, 0.5 a medium effect, and 0.8 a large effect. Therefore, with an estimated Cohen's d of 0.32, there is a small treatment effect.

To calculate r², we use the formula

r² = t² / (t² + df)

where t is the t statistic, df is the degrees of freedom (n-2 for a two-group design), and n is the sample size. Using the given values for the Internet training group, we have

t = 2.83

n = 81

df = 79

So, r² = 2.83² / (2.83² + 79) = 0.073

Using the extension of Cohen's guidelines for interpreting effect size with r², a value of 0.01 is considered a small effect, 0.09 a medium effect, and 0.25 a large effect. Therefore, with an r² of 0.073, there is a small treatment effect.

For the job seekers who received training on interview skills, we can calculate Cohen's d and r² in a similar way

d = (M - M0) / SD = (8.1 - 7.4) / 0.8 = 0.88

t = 7.78

n = 81

df = 79

r² = 7.78² / (7.78² + 79) = 0.479

Using Cohen's guidelines for interpreting effect size with Cohen's d, a value of 0.2 is considered a small effect, 0.5 a medium effect, and 0.8 a large effect. Therefore, with an estimated Cohen's d of 0.88, there is a large treatment effect.

Using the extension of Cohen's guidelines for interpreting effect size with r², a value of 0.01 is considered a small effect, 0.09 a medium effect, and 0.25 a large effect. Therefore, with an  r² of 0.479, there is a medium to large treatment effect.

To know more about estimated Cohen's d:

https://brainly.com/question/31427772

#SPJ4

Answer:.317

.091

Small to med

Med

.875

.431

Large

Large

Step-by-step explanation:

Answer:

Jaxon made 11 free throws over the season.

Step-by-step explanation:

If he made 5% of his free throws, we know that he will make 5% of the total number of free throws he took, which is 220:

We multiply 220 by 0.05, or 5% to find out how many free throws he made:

220*0.05 = 11

After that, we now know that Jaxon made 11 of his free throws out of 220 over the course of the season, or 5%.

To compute the covariance matrix of the variables in the data, the "matrix-operation" which should be used is ([tex]X^{t}[/tex] × X)/n.

The "Covariance" matrix is defined as a symmetric and positive semi-definite, with the entries representing the covariance between pairs of variables in the data.

The "diagonal-entries" represent the variances of individual variables, and the off-diagonal entries represent the covariances between pairs of variables.

Step(1) : Compute the transpose of the centered data matrix X, denoted as [tex]X^{t}[/tex]. The "transpose" of a matrix is found by inter-changing its rows and columns.

Step(2) : Compute the "dot-product" of [tex]X^{t}[/tex] with itself, denoted as [tex]X^{t}[/tex] × X.

The dot product of two matrices is computed by multiplying corresponding entries of the matrices and summing them up.

Step(3) : Divide the result obtained in step(2) by the number of samples in the data, denoted as "n", to get the covariance matrix.

This step scales the sum of the products by 1/n, which is equivalent to taking the average.

So, the covariance matrix "C" of variables in "centered-data" matrix X can be expressed as: C = ([tex]X^{t}[/tex] × X)/n.

Learn more about Covariance Matrix here

https://brainly.com/question/30481066

#SPJ4

The given question is incomplete, the complete question is

Let X be a matrix of centered data with a column for each field in the data and a row for each sample. Then, not including a scalar multiple, how can we use matrix operations to compute the covariance matrix of the variables in the data?

Step-by-step explanation:

hope this will help you Thanks

Answer: Sarah bought 5 first class tickets and (13-5) = 8 coach tickets.

Step-by-step explanation: The taken a toll of one to begin with lesson ticket is $1200 and the fetched of one coach ticket is $380.

So, the full taken a toll of first class tickets would be 1200x and the entire cost of coach tickets would be 380(13-x) = 4940 - 380x.

The overall fetched of the tickets is given as $9040, so we will set up the taking after condition:

1200x + 4940 - 380x = 9040

Streamlining and tackling for x, we get:

820x = 4100

x = 5

All of these ratios are equal to b, and we have shown that there is a constant ratio between consecutive output values.

The common ratio is the ratio that remains constant between successive function output values. The behaviour of a geometric sequence, which is a series of numbers where each term is produced by multiplying the one before it by a set number (the common ratio), depends on the common ratio. The sequence is rising exponentially if the common ratio is bigger than 1. The sequence decreases exponentially if the common ratio is between 0 and 1.

To show that the function form shows a constant ratio we take:

[tex](x+1) / f(x) = (ab^{(x+1)}) / (ab^x) = b[/tex]

Similarly, we have:

[tex]f(x+2) / f(x+1) = (ab^{(x+2)}) / (ab^{(x+1)}) = b[/tex]

Hence, all of these ratios are equal to b, and we have shown that there is a constant ratio between consecutive output values.

Learn more about ratio here:

https://brainly.com/question/29774220

#SPJ1

Step-by-step explanation:

Again, using similar triangle ratios

7.2 m  is to 2.4 m  

     as   AB is to  12.0 m

7.2 / 2.4  = AB/12.0    Multiply both sides of the equation by 12

12 *   7.2 / 2.4   = AB = 36.0 meters

The perimeter and the area of the regular polygon are 20 inches and 27.53 square inches.

The figure representing a regular polygon with five sides of same length, whose perimeter and area is well described by following formulas:

Perimeter

p = n · l

Area

A = (n · l · a) / 2

Where:

Where the apothema is:

a = 0.5 · l / tan (180° / n)

If we know that l = 4 in and n = 5, then the perimeter and the area of the polygon are:

Perimeter

p = 5 · (4 in)

p = 20 in

Area

a = 0.5 · (4 in) / tan (180° / 5)

a = 0.5 · (4 in) / tan 36°

a = 2.753 in

A = [5 · (4 in) · (2.753 in)] / 2

A = 27.53 in²

To learn more on area of regular polygons: https://brainly.com/question/12291395

#SPJ1

It depends on the rotational speed of the wheel. To calculate this speed, we need to know the angular velocity of the wheel.

The maximum speed of a point on the outside of the wheel, 15 cm from the axle, if we assume that the wheel is rotating at a constant rate, we can use the formula v = rω, where v is the speed of the point on the outside of the wheel, r is the radius of the wheel (15 cm in this case), and ω is the angular velocity of the wheel. Therefore, the maximum speed of a point on the outside of the wheel would be directly proportional to the angular velocity of the wheel.
The formula to calculate the maximum linear speed (v) is:
v = ω × r
where v is the linear speed, ω is the angular velocity in radians per second, and r is the distance from the axle (15 cm, or 0.15 meters in this case).
Once you have the angular velocity (ω) of the wheel, you can plug it into the formula and find the maximum speed of a point on the outside of the wheel.

Learn more about rotational speed here: brainly.com/question/17025846

#SPJ11

The logical assumption used is: An arithmetic sequence is a set of discrete values, whereas a line is a continuous set of values.

An arithmetic sequence is a set of numbers where, with the exception of the first term, each term is obtained by adding a fixed constant to the term before it. Every pair of following terms in the sequence has the same fixed constant, which is known as the common difference. A1 stands for the first term in an arithmetic sequence, while an is used to represent the nth term.

A solid line symbolises continuous numbers, whereas the classmate's logical presumption is that an arithmetic series comprises of discrete values. This presumption is untrue, though, as a line can effectively represent an arithmetic series.

Learn more about arithmetic sequence here:

https://brainly.com/question/29616017

#SPJ1

Answer: there is only one number

Answer:

Solo hay un número primo que se puede escribir como suma de dos números primos y también como diferencia de dos números primos.

Espero haber ayudado :D

The cube roots of 216 written in the rectangular (standard) form are 3 + 3√3, -3+3√3, and 6.

In mathematics, the cube root formula is used to represent any number as its cube root, for example, any number x will have the cube root 3x = x1/3. For instance, 5 is the cube root of 125 as 5 5 5 equals 125.

3√216 = 3√(2x2x2)x(3x3x3)

= 2 x 3 = 6

the prime factors are represented as cubes by grouping them into pairs of three. As a result, the necessary number, which is 216's cube root, is 6.

Therefore, the cube roots of 216 are 3 + 3√3, -3+3√3, and 6.

Learn more about cube root, here:

https://brainly.com/question/31153573

#SPJ1

It will take John approximately 17 months to pay off the balance.

What is simple interest?

Simple Interest (S.I.) is the method of calculating the interest amount for a particular principal amount of money at some rate of interest.

Assuming that John does not use the credit card for any other purchases and that the credit card company uses a simple interest calculation method, we can use the following steps to calculate the number of months it will take John to pay off the balance:

Calculate the monthly interest rate by dividing the annual percentage rate (APR) by 12:

Monthly interest rate = 19% / 12 = 0.01583

Calculate the monthly finance charge by multiplying the outstanding balance by the monthly interest rate:

Monthly finance charge = $2000 x 0.01583 = $31.66

Subtract the monthly payment from the monthly finance charge to get the amount that will be applied to the outstanding balance:

Payment applied to balance = $150 - $31.66 = $118.34

Divide the outstanding balance by the payment applied to balance to get the number of months it will take to pay off the balance:

Number of months to pay off balance = $2000 / $118.34 = 16.9

(rounded up to the nearest whole number)

Therefore, it will take John approximately 17 months to pay off the balance.

To learn more about the simple interest visit:

brainly.com/question/20690803

#SPJ1

Using the fact that the triangles are similar we can see that the value of x is  36

We can see that the triangles are similar due to the same interior angles, then ther is a scale factor k between them.

So we can write:

20*k = 48

k = 48/20 = 2.4

Then:

x = 15*2.4

x = 36

That is the value of x.

Learn more about similar triangles at:

https://brainly.com/question/14285697

#SPJ1

The statement that is true about Evan's expression is that it represents a linear function of the amount of medicine in his bloodstream, where the initial amount is 100 milligrams and the rate of change is -0.4 milligrams per minute.

What is the equivalent expression?

Equivalent expressions are expressions that perform the same function despite their appearance. If two algebraic expressions are equivalent, they have the same value when we use the same variable value.

The expression 100 - 0.4m represents the amount of medicine in Evan's bloodstream after m minutes, where the amount of medicine decreases by 0.4 milligrams each minute.

The coefficient of the variable m (-0.4) represents the rate of change of the amount of medicine in Evan's bloodstream per minute. It tells us that for every one minute that passes, the amount of medicine in his bloodstream decreases by 0.4 milligrams.

The constant term (100) represents the initial amount of medicine in Evan's bloodstream before the medicine starts to decrease.

Therefore, the statement that is true about Evan's expression is that it represents a linear function of the amount of medicine in his bloodstream, where the initial amount is 100 milligrams and the rate of change is -0.4 milligrams per minute.

To learn more about the equivalent expression visit:

https://brainly.com/question/2972832

#SPJ1

The surface area of the cylinder is approximately 94.2 ft².

Surface area refers to the total area of the external or outer part of an object. It is the sum of the areas of all the individual surfaces or faces of the object. Surface area is typically measured in square units, such as square inches (in²), square feet (ft²), or square meters (m²), depending on the unit of measurement used.

According to the given information:

The surface area of a cylinder is the sum of the lateral surface area (the curved surface) and the area of the two circular bases.

The formula for the lateral surface area of a cylinder is given:

Lateral Surface Area = 2πrh

where r is the radius of the cylinder and h is the height of the cylinder.

Plugging in the given values for the radius (r = 3 ft) and height (h = 2 ft), we can calculate the lateral surface area:

Lateral Surface Area = 2π * 3 * 2 = 12π ft²

The formula for the area of a circle (which represents the bases of the cylinder) is given:

Circle Area = πr²

Plugging in the given value for the radius (r = 3 ft), we can calculate the area of each circular base:

Circle Area = π * 3² = 9π ft²

Since there are two bases in a cylinder, we multiply this by 2 to account for both bases:

2 * Circle Area = 2 * 9π = 18π ft²

Now, we can add the lateral surface area and the area of the two bases to find the total surface area of the cylinder:

Total Surface Area = Lateral Surface Area + 2 * Circle Area

= 12π + 18π

= 30π ft²

As a decimal rounded to the nearest tenth, the surface area of the cylinder is approximately 94.2 ft²

To know more about surface area visit: https://brainly.com/question/22074027

#SPJ1

Equation that represents the total number of minutes y Emily studied for the math exam is y = 40 +x.

We can represent the total number of minutes Emily studied for the math exam using the equation,

y = 40 + x

Here, 'y' represents the total number of minutes Emily studied for the math exam, '40' represents the number of minutes she studied in the morning, and 'x' represents the number of minutes she studied later that evening.

By adding the number of minutes studied in the morning to the number of minutes studied later that evening, we can calculate the total number of minutes Emily studied for the math exam.

To learn more about Equation here:

https://brainly.com/question/29147854

#SPJ4

The missing angles of the diagram are:

∠1 = 118°

∠2 = 62°

∠3 = 118°

∠4 = 30°

∠5 = 32°

∠6 = 118°

∠7 = 30°

∠8 = 118°

Supplementary angles are defined as two angles that sum up to 180 degrees. Thus:

∠1 + 62° = 180°

∠1 = 180 - 62

∠1 = 118°

Now, opposite angles are congruent and ∠2 is an opposite angle to 62°. Thus: ∠2 = 62°.

Similarly: ∠3 = 118° because it is congruent to ∠1

Alternate angles are congruent and ∠5 is an alternate angle to 32°. Thus:

∠5 = 32°

Sum of angle 4 and 5 is a corresponding angle to ∠2 . Thus:

∠4 + ∠5 = 62

∠4 + 32 = 62

∠4 = 30°

This is an alternate angle to ∠7 and as such ∠7 = 30°

Sum of angles on a straight line is 180 degrees and as such:

∠8 = 180 - (30 + 32)

∠8 = 118° = ∠6 because they are alternate angles

Read more about Missing Angles at: https://brainly.com/question/28293784

#SPJ1

For a normal distribution ,a positive value of z simply means that the observation or sample mean is above the population mean this implies

none of the options provided is completely accurate.

All the observations must have had positive values,

It is not necessarily true for a positive value of z.

The value of z indicates how many standard deviations away from the mean a particular observation or sample mean is.

A positive value of z simply means that the observation or sample mean is above the population mean.

The area corresponding to the z is either positive or negative,

It is also not accurate.

The area under the normal curve corresponds to probabilities, not positive or negative values.

The area to the right of the mean corresponds to positive z-values, and the area to the left of the mean corresponds to negative z-values.

The sample mean is smaller than the population mean,

It is a possibility when the z-value is negative, indicating that the sample mean is below the population mean.

The sample mean is larger than the population mean,

It is a possibility when the z-value is positive, indicating that the sample mean is above the population mean.

Therefore, the sample mean can be either larger or smaller than the population mean depending on the direction of the z-value.

Learn more about population mean here

brainly.com/question/29064364

#SPJ4

The expression for the problem is:

Total cost = $42 + ($12/hour × 3 hours) × 2 people

Bruce charged David and Ricky a fixed fee of $42 for parts plus an hourly rate of $12 for labor. He spent 3 hours repairing the motorcycle. Since there are two people (David and Ricky), we need to multiply the hourly rate by the number of hours worked (3) and then multiply that by 2. Finally, we add the fixed fee for the parts to get the total cost.

To evaluate the expression using the order of operations, we need to perform the multiplication first and then the addition. So, we have:

Total cost = $42 + ($12/hour × 3 hours) × 2 people

= $42 + ($36) × 2

= $42 + $72

= $114

Therefore, David and Ricky owe Bruce a total of $114 for the motorcycle repair.

Learn more expression on

https://brainly.com/question/1859113

#SPJ1