Answer:
HBr is the strongest and its bond is what which makes it the strongest acid.
Explanation:
This acid is dangerous and highly poisonous than other acids. It can disunite instantly. And later then it forms the suspension.
Li_{2}OLi
2
O and LiBr is not merely an acid and henceH_{2}SH
2
S and HBr are the acids, amongst which HBr forms the strong acid component.
The strongest nature is due to the formation of hydronium ions.
The Hydrogen sulphide acid does not release hydronium ions on suspension.
Answer:
HBr is the strongest and its bond is what which makes it the strongest acid.
Explanation:
Are ionic compounds not carrying a charge?
Answer:
yes they carry charges
The motion of a car on a position-time graph is represented with a horizontal line. What does this indicate about the car's motion?
OA. It's not moving
OB. It's moving at a constant speed.
OC. It's moving at a constant velocity.
OD
It's speeding up.
Will give extra points and brainliest if you go in the comments and answer a few other questions
Answer:
5,293 km, A
Explanation:
B has no coma.
C is too overly touchy
Answer:
b
Explanation:
7th grade help me plzzzzzzzzzz
Copernicus challenged the way in which people of his time thought about the solar system. How did Copernicus describe the motion of the sun?
A.The sun is stationary.
B.The sun revolves around Earth.
C.The sun moves in an elliptical orbit.
D.The sun moves in a straight line through space.
Answer:
A. The sun is stationary and we rotate around it.
Hope This Helps!
Answer:
A
Explanation:
the sun is stationary
How long does it take for new fossil fuels to be created?
A.millions of years
B.billions of years
C. thousands of years
D. hundreds of years
Answer:
millions of years sometimes even hundred of millions of years
Answer:
How long does it take for new fossil fuels to be created?
Explanation: so it takes 65 million years to creat new fossil fuels so i think it may be A.millions of years i am sorry if i am wrong but i do beleave i am right
Methanol, propan-1-ol and ethanol has boiling point of 65 degree celsius, 97 degree celsuis, 87 degree celsuis respectively. A student uses fractional distillation to separate a mixture of these compound. State which liquid will be collected in the second fraction and explain why
Answer:
ethanol
Explanation:
Methanol has a boiling point of 65°C, propan-1-ol has a boiling point of 97°C and ethanol has a boiling point of 87°C
Fractional distillation is used for separating miscible liquids through the use of the different vapor pressure properties of the liquids. As the mixture is heated up, components start to vaporize according to their boiling points. The component with the least boiling point vaporizes first while the component with the highest boiling point vaporizes last.
This means that methanol would vaporize at the first fraction because it has the lowest boiling point followed by ethanol at the second fraction and then propan-1-ol at the last fraction.
how is sonoluminescence similar to what we see in fireworks?
Answer:
Explanation:
Sonoluminescence is a phenomenon in which small gas bubbles burst to produce light when intense sound wave is introduced. Thus, it can be said that sound energy is converted to light energy here. This is similar to the process of how fire crackers work except that sonoluminescence occurs in a liquid medium while firecrackers work in solid media. In firecrackers, when the tip is lit with fire, the initial explosion is caused by the expansion of some nitrogen and carbon present in some constituent compounds, this explosion produces heat which causes some other constituent chemicals in the firecracker to quickly react and produce light. Thus, this can also be said to convert sound energy to light energy and are thus similar to what occurs in sonoluminescence.
In a chemical reaction 300 grams of reactant A combined with 100 grams of reactant B both A and B react to completion what is the mass of the product?
1. 200
2. 300
3. 400
4. It cannot be determined given the information
Answer: 1.2
Explanation:
When the dry ingredients of a cake are combined, what is the result? A.Element B.Mixture C.Compound D.Atom
A combination of dry ingredients of a cake results in a mixture.
A mixture is a combination of substances that are only physically but not chemically combined.
Mixtures are different from elements, compounds, and atoms because:
elements are pure substances consisting of a single type of atomcompounds are a mixture of different elements that are chemically combinedatoms are the smallest particle of an element.More on mixtures can be found here: https://brainly.com/question/24898889?referrer=searchResults
Answer:
Its mixture
Explanation:
Pls give me brainly ...
How do tectonic plates move at convergent subduction boundaries? Insert a drawing with the arrows that show the movement
Answer:
If two tectonic plates collide, they form a convergent plate boundary. Usually, one of the converging plates will move beneath the other, a process known as subduction. ... As the sinking plate moves deeper into the mantle, fluids are released from the rock causing the overlying mantle to partially melt.
How many grams of nickel 58.69 (No,58.69 g/mol) are in 1.57 moles of nickel
Answer:
92.1
Explanation:
1.57 * 58.69
Scientists use patterns in the periodic table to what?
What is the density of an object (g/cm) that has a mass of 2.78 g & a volume of 10.0
cm3?
Answer:
The answer is 0.28 g/cm³Explanation:
The density of a substance can be found by using the formula
[tex]density = \frac{mass}{volume} \\ [/tex]
From the question we have
[tex]density = \frac{2.78}{10} \\ = 0.278[/tex]
We have the final answer as
0.28 g/cm³Hope this helps you
Answer:
p = 0.278 g/cm3
Explanation:
define atomic number
Answer:
the number of protons in the nucleus of an atom, which determines the chemical properties of an element and its place in the periodic table.
how many moles is ( 1 x 10^9 ) molecules O2
Answer:
The answer is
[tex]1.66 \times {10}^{ - 15} \: \: moles[/tex]
Explanation:
To find the number of moles in a substance given it's number of entities we use the formula
[tex]n = \frac{N}{L} \\ [/tex]
where n is the number of moles
N is the number of entities
L is the Avogadro's constant which is
6.02 × 10²³ entities
From the question we have
[tex]n = \frac{1 \times {10}^{9} }{6.02 \times {10}^{23} } \\ [/tex]
We have the final answer as
[tex]1.66 \times {10}^{ - 15} \: \: moles[/tex]
Hope this helps you
Which statement best describes John Dalton's use of creativity in his work? He reinterpreted and retested Joseph Proust's results. He used a philosophy to conduct his experiment. He recorded his results as four parts of the atomic theory. He rejected Democritus's idea that matter was composed of atoms.
Answer: The correct statement is that,
'He reinterpreted and retested Joseph Proust's results'
Explanation:
John Dalton was an English chemist who contributed greatly to the field of Chemistry. He published his theory about atom in 1808.
Dalton was the first person to recognize a workable distinction between the fundamental particle of an element (atom) and that of a compound (molecule). The atomic theory generally summaries the laws of chemical composition which includes:
--> law of constant composition and
---> law of multiple proportions.
John Dalton was being creative in his work by reinterpretation and retesting of Joseph Proust's results. Joseph Proust was a French chemist that first discovered the law of constant composition in 1794. This means that many has started working on the atoms before John Dalton discovery.
From the previous works of Proust, he had studied tin oxides and found that their masses were either 88.1% tin and 11.9% oxygen or 78.7% tin and 21.3% oxygen (these were tin(II) oxide and tin dioxide respectively). Dalton retested and noted from these percentages that 100g of tin will combine either with 13.5g or 27g of oxygen; 13.5 and 27 form a ratio of
Dalton reinterpreted it by finding an atomic theory of matter that could elegantly explain this common pattern in chemistry – in the case of Proust’s tin oxides, one tin atom will combine with either one or two oxygen atoms. I hope this helps, thanks.
Answer:
A.) He reinterpreted and retested Joseph Proust's results
Explanation:
Convert 2.5 x 102km to mm.
Convert 188 dL to L
Suppose that green spheres represent chlorine atoms, yellow-green spheres represent fluorine atoms, white spheres represent hydrogen atoms, and all the molecules are gases
Answer:
a. Reactants: F₂ and HCl molecules
Products: Cl₂ and HF
b. 4HCl + 2F₂ ----> 4HF + 2Cl₂
c. Single replacement reaction
Note: The question is not complete. The complete question is found below as well as in the attachment.
Suppose that green spheres represent chlorine atoms, yellow-green spheres represent fluorine atoms, white spheres represent hydrogen atoms, and all the molecules are gases:
a. write a formula for each of the reactants
b. write a balanced equation for the reaction
c. indicate the type of reaction as combination,decomposition, single replacement, double replacement, or combustion
Explanation:
a. From the models shown in the diagram, The reactants are F₂, HCl while the products are Cl₂ and HF respectively
b. Equation for the reaction is given below;
4HCl + 2F₂ ----> 4HF + 2Cl₂
c. The reaction is single replacement reaction such that fluorine gas molecules replace the chlorine atoms in hydrogen chloride to form hydrogen fluoride with the liberation of chlorine atoms as gaseous molecules.
What are the coefficients that would correctly balance this equation? __Zn+__K2CrO4 > __K + __ZnCrO4
A. 2,1,2,1
B. 1,2,3,1
C. 1,2,1,2
D. 1,1,2,1
Can someone please help
D. 1,1,2,1
Further explanationEqualization of chemical reactions can be done using variables. Steps in equalizing the reaction equation:
1. gives a coefficient on substances involved in the equation of reaction such as a, b, or c, etc. 2. make an equation based on the similarity of the number of atoms where the number of atoms = coefficient × index (subscript) between reactant and product 3. Select the coefficient of the substance with the most complex chemical formula equal to 1Reaction(unbalanced)
Zn+K₂CrO₄ ⇒ K + ZnCrO₄
Give coefficient
aZn+K₂CrO₄ ⇒ bK + cZnCrO₄
Zn, left=a, right=c⇒a=c
K, left=2, right=b⇒b=2
Cr, left=1, right=c⇒c=1⇒a=1
O,left=4,right=4c⇒4c=4⇒c=1
Reaction(balanced0
Zn+K₂CrO₄ ⇒ 2K + ZnCrO₄
Which of the following is a subsurface event that takes place during the rock cycle?
Group of answer choices
Cementing
Erosion
Melting
Weathering
Answer:
Melting
Explanation:
Could not have been erosion because erosion happens on the surface.
Could not have been weathering because weathering happens on the surface.
So we only have Cementing and Melting left....
The answer is melting, I got 100% on my test.
Hope this helps!!!! :D
Please give brainliest!!!
Answer:
D
Explanation:
In the rock cycle, surface events takes place at the surface of earth. Thus,
weathering and erosion are surface events, while the subsurface events he take place in the deeper section of the earth . Examples of sub surface events are plate tectonics and mountain building or anything that takes place in the inner core of earth.
Check out this long-form version of the periodic table. It shows where the two rows of
elements from question 4 really belong in the periodic table. Think about the challenges of
using this version of the periodic table.
Which statement offers the most likely explanation of why the long-form version of the
periodic table is seldom used?
The elements in the separate group are so rare that they do not occur in nature.
The elements in the separate group have very little in common with one another.
The long-form version no longer keeps the elements in order of increasing atomic
number.
The long-form version is too wide to easily fit on a computer screen or sheet of
paper.
Answer:
The long form version is too wide to easily fit on a computer screen or sheet of paper
Explanation:
A student builds an electrical circuit. In the circuit, a
battery is connected to a siren.
Which series of energy transformations takes place in the circuit when the
siren turns on?
A. Chemical energy - Sound energy - Electrical energy
O B. Electrical energy - Chemical energy - Sound energy
C. Chemical energy - Electrical energy - Sound energy
O D. Sound energy - Electrical energy - Chemical energy
Answer:
C. Chemical energy - Electrical energy - Sound energy
Explanation:
According to the law of conservation of energy, energy can be transformed i.e changed from one form to another. According to this question, a student builds an electrical circuit, which connects a battery to a siren. Based on this description, the electrical circuit uses ELECTRICAL ENERGY supplied by the CHEMICAL ENERGY in the battery cell.
The electrical energy in the circuit connects the CHEMICAL ENERGY in the battery to the siren, which makes the sound using SOUND ENERGY. In other words, the CHEMICAL ENERGY of the battery powers the ELECTRICAL ENERGY of the circuit to make SOUND ENERGY in the siren. Hence, the order of energy transformation is: Chemical energy - Electrical energy - Sound energy
Answer:
C. Chemical energy - Electrical energy - Sound energy
Explanation: I took the test:)
methanol on reaction with acetyl chloride gives
Answer:
Explanation:
Ethanoyl chloride reacts instantly with cold ethanol. There is a very exothermic reaction in which a steamy acidic gas is given off (hydrogen chloride). Ethyl ethanoate (an ester) is formed.
Will give Brainliest
Answer:
i think its b
Explanation:
a glass of water with a mass of 0.35 kg rests on the edge of a desk 0.85 m above the floor given that the acceleration due to gravity is 9.8 m / s² what is the elastic potential energy
Answer:
2.92
Explanation:
just took the test
Glycerol has a density of 1.26g/mL. What is the mass of 3000.mL of glycerol?
What term is used for the electrons in the outermost shell or energy level
Answer:
Valence Electrons
Explanation:
Answer:
Valence
Explanation:
The outermost shell are the valence electrons
I need help please （o´・ェ・｀o）
Tantalum: 2
Niobium: 3
Dubnium: 1
Please make brainliest ?
Question 6 (1 point)
Sound, earthquakes, and waves in water are rechanical waves because they require
a physical to transport energy. (Lesson 4.02)
O electromagnetic field
O disturbance
O medium
location
Answer: The answer is MEDUIM
Explanation: