dolly buys 12 identical pens for $9.48 how much does each pen cost

Answer:

Based on the given input-output pairs (2,8), (3,11), and (4,14), it appears that the rule for this function table is to multiply the input by 3 and then add 2 to get the output. In other words, for an input x, the output is given by the function f(x) = 3x + 2.

The events of choosing a jack or a spade out of a standard deck of cards are not mutually exclusive.

Mutually exclusive events are events that cannot happen at the same time. In other words, if one event occurs, the other cannot.

In a standard deck of cards, there are four jacks and thirteen spades. One of the jacks is also a spade (the jack of spades). Therefore, it is possible to choose a card that is both a jack and a spade at the same time.

Since the events are not mutually exclusive, the probability of choosing a jack or a spade is the sum of the probabilities of each event minus the probability of both events occurring:

P(jack or spade) = P(jack) + P(spade) - P(jack and spade) = 4/52 + 13/52 - 1/52 = 16/52 = 4/13

Therefore, the events of choosing a jack or a spade out of a standard deck of cards are not mutually exclusive.

Know more about equilibrium mutually exclusive here:

https://brainly.com/question/28565577

#SPJ11

Answer:

To determine if s is inversely proportional to f, we need to check if their product is constant. Let's multiply s and f for each row:

s * f = 0.2 * 5 = 1

s * f = 0.5 * 2 = 1

s * f = 1.4 * 0.714 ≈ 1

s * f = 7.5 * 0.133 ≈ 1

s * f = 3 * 0.3 = 0.9

As we can see, the product of s and f is approximately constant for all rows except the last one. This means that s and f are not inversely proportional in general.

However, we can see that the product of s and f is close to 1 for the first four rows. This suggests that s and f may be inversely proportional for values of s less than 3.

To confirm this, we can calculate the constant of proportionality k using the first two rows:

s * f = k

0.2 * 5 = k

k = 1

Therefore, the equation relating s and f is:

s * f = 1

or

f = 1/s

This shows that s and f are indeed inversely proportional for values of s less than 3. However, for s = 3, the product of s and f is 0.9 instead of 1, which means that s and f are not inversely proportional for this value of s.

The proportion of the shaded area in the rectangle is 0.111.

The shaded area of the rectangle can be calculated by subtracting the area of the unshaded area from the total area of the rectangle. The total area of the rectangle is 36 units2 (Area = length x width). The unshaded area is 32 units2 (Area = 4 x 9). Therefore, the shaded area is 4 units2 (36-32).

The proportion of the shaded area in the rectangle can be calculated by dividing the area of the shaded area by the total area of the rectangle. The proportion of the shaded area is 4/36, or 1/9. This can also be expressed as a decimal, 0.111.

Learn more about area of the rectangle here:

https://brainly.com/question/8663941

#SPJ4

The pressure on a brake pad has an area of 0.35 m² and a force of 21 N applied on it is equals to the 60N/m².

We have, area of a brake pad, A

= 0.35 m².

Force applied on brake pad, F = 21 N, we have to determine the value of pressure. Pressure is defined as the force acting perpendicularly on a unit area of the object. The standard unit of pressure is Pascals = 1 N/m². Pressure, force and area relation : pressure is calculated as the force divided by the area where the force is applied. So, in this case we have both force and area. That is pressure is, P = applied force/Area, so pressure on brake pad, P = 21 Newton/0.35 m²

=>[tex] P = \frac{2100}{35}[/tex]N/m²

=> P = 60 N/m²

Hence, the required pressure value is 60 N/m².

For more information about pressure, visit :

https://brainly.com/question/29494841

#SPJ4

Complete question:

A brake pad has an area of 0.35 m² and has a force of 21 N applied to it what’s the pressure in N/m².

The velocity of the ball after 2 seconds is 412 feet per second.

The position function for free-falling objects is s(t) = -16t^2 + v0t + S0, where t is the time, v0 is the initial velocity, and S0 is the initial position. In this case, the initial velocity v0 is -19 feet per second and the initial position S0 is the top of a 482-foot building.

To find the velocity after 2 seconds, we can plug in the time t = 2 into the equation and solve for the velocity v:

s(t) = -16t^2 + v0t + S0

s(2) = -16(2)^2 + (-19)(2) + 482

s(2) = -32 -38 + 482

s(2) = 412

Therefore, the velocity of the ball after 2 seconds, after calculation, is 412 feet per second.

To know more about calculating Velocity, click the link below:

https://brainly.com/question/30599695#

#SPJ11

To make a scatter plot of the data from each table, begin by assigning the x-axis to represent the values from one of the tables and the y-axis to represent the values from the other table. Then plot each pair of values onto the graph, creating a "scatter" of points. To draw a trend line, look for the general pattern in the data points and draw a line that best fits them. To find the equation of the trend line, use the formula y = mx + b, where m is the slope of the line and b is the y-intercept. To find the slope of the line, use the formula m = (y2 - y1) / (x2 - x1), where (x1, y1) and (x2, y2) are any two points on the line. To find the y-intercept, plug the slope and any point on the line into the equation y = mx + b and solve for b.

The given data is as follows: 5, 66, and 9. We can plot these values in a scatter plot by following the steps mentioned below:Step 1: Plot the given data points on the Cartesian plane. Step 2: Find the equation of the line of best fit/trend line. We can use the least-squares regression method to find the line of best fit/trend line. This method gives us the equation of a line that best represents the relationship between two variables. In this case, the two variables are X and Y. Step 3: Draw the trend line on the scatter plot. Step 4: Write the equation of the trend line. The equation of the line of best fit/trend line is in the form of y = mx + c, where m is the slope of the line, and c is the y-intercept. . However, we can still draw a line of best fit/trend line that passes through the data points. The equation of the line of best fit/trend line can be found using the least-squares regression method. Using this method, we get the equation of the line of best fit/trend line as: y = -10.33x + 71.33Therefore, the equation of the trend line is y = -10.33x + 71.33.

For more such slope related questions

https://brainly.com/question/1884491

#SPJ11

matrix A was expressed in the form, a=[a c] [b d] find the value of a - b + c + d. 5x+7y=7 3x-2y=9. That is

a =5, c=7; and b=3, d=-2

a - b + c + d = 5 - 3 + 7 + (- 2) = 7

The given equations are

5x + 7y = 7

3x - 2y = 9

As a matrix equation,

A = [5 7

      3 - 2]

X = [x

       y]

C = [7

      9]

That is

a =5, c=7; and b=3, d=-2

a - b + c + d = 5 - 3 + 7 + (- 2) = 7

A matrix equation is an equation of the structure Hatchet = b, where An is an m × n matrix, b is a vector in R m, and x is a vector whose coefficients x 1, x 2,..., x n are obscure.

to know more about matrix equations click here:

https://brainly.com/question/28777961

#SPJ4

the complete question is :

If the following system of equations was written as a matrix equation in the form AX = C,? and matrix A was expressed in the form, a=[a c] [b d] find the value of a - b + c + d. 5x+7y=7 3x-2y=9.

The image of the given points under the rotation through +90° about the center origin include the following;

A' (-5, 4).

B' (-3, -2).

C' (5, -3).

D' (1, 4).

In Geometry, the rotation of a point 90° about the center (origin) in a counterclockwise (anticlockwise) direction would produce a point that has these coordinates (-y, x).

By applying a rotation of 90° counterclockwise to the vertices of each figure, the coordinates of the vertices of the image are as follows:

(x, y)    →       (-y, x)

A (4, 5) = A' (-5, 4).

B (-2, 3) = B' (-3, -2).

C (-3, -5) = C' (-(-5), 3) = (5, -3)

D (4, -1)​ = D' (-(-1), 4) = (1, 4)

Read more on rotation here: brainly.com/question/28854313

#SPJ1

To make 20 litres of the cranapple mixture, Taylor should combine 8 litres of apple juice and (20 - 8) = 12 litres of cranberry juice.

Let's assume that Taylor mixes x liters of apple juice and (20 - x) liters of cranberry juice to make 20 liters of the cranapple mixture.

The price of the used apple juice is $0.85 and the price of the used cranberry juice is $1.25 (20 - x).

The mixture is supposed to be sold for exactly what the ingredients cost, or $1.09 per litre, according to the problem. As a result, the total cost of the juice used to create the mixture must be equivalent to the price at which it is sold.

[tex]0.85x + 1.25(20 - x) = 1.09(20)[/tex]

[tex]0.85x + 25 - 1.25x = 21.8-0.4x = -3.2x = 8[/tex]

Verification:

[tex]0.85(8) + 1.25(12) = 10.8[/tex]

Verify:

1.09(20) = 21.8

Learn more about liters here:

https://brainly.com/question/14780251

#SPJ1

Answer:

the volume is 5 to the next power which is 3 u end up with multiplication which mean u multiply 5 with 3 to get ur units

Since, Consider a set of data in which the sample mean is 33. 7 and the sample standard deviation is 7. 2. Calculate the z-score given that

x= 30. 2. Therefore, the Z score is -0.486111.

Z score:

Standard scores are often referred to as z-scores; the two terms are used interchangeably. Other equivalent terms used include z-score, normal score, standardized variable, and high-energy physical attraction.

In statistics, a standard score is the number of standard deviations by which a raw score (i.e. an observation or data point) has a value greater than or less than the observed or measured mean. Raw scores above the mean have positive standard scores, while raw scores below the mean have negative standard scores.

Given that:

Sample mean (μ) = 33.7

Standard deviation (σ) = 7.2

X = 30.2

We know that:

Z score = X -μ/ σ

z-score using the formula z = (x - μ) / σ,

where,

x is your data point,

μ is the mean, and

σ is the standard deviation.

Putting the values in the equation:

⇒ Z score = X -μ/ σ

                 = 30.2 - 33.7/ 7.2

                 = -0.486111

Learn more about Mean:

https://brainly.com/question/30112112

#SPJ4

The length of the rectangle is 7 units.

Length is a measure of distance or size. It is typically measured in meters, centimeters, feet, or inches. Length is a fundamental concept in mathematics, physics, and engineering. It is used to measure the size of an object or the distance between two points. Length is an important factor in the design of many structures, including buildings, bridges, and roads. Length can also be used to describe the duration of time, such as the length of a movie or a song.

To solve this problem, we will use the formula for the area of a rectangle, which is A = lw. We know that the width is the length minus 6 units, so we can rewrite the area equation as: A = (l-6)l. We then solve for l by multiplying both sides of the equation by l and dividing by l-6, giving us: l = A/(l-6). Since the area is 7 square units, we can plug in 7 for A and solve for l: l = 7/(l-6). We then solve for l by solving for the value of l on both sides of the equation, giving us: l = 7/(7-6) = 7/1 = 7. Therefore, the length of the rectangle is 7 units.

To know more about length click-
https://brainly.com/question/25292087
#SPJ1

Answer:

48 tiles are required.

Step-by-step explanation:

The area is the total space taken up by a flat (2-D) surface or shape. The area is always measured in square units.

To solve for the area of a rectangle, we use this expression:

(Let l = length, w = width and a = area)

Inserting the dimensions of the hall:

Each tile has an area of:

To find the number of tiles needed to cover the hall, we can divide the area of the hall by the area of each tile:

Therefore, 48 tiles are required to cover the rectangular hall.

the number of coupons sent to potential members was 228.

What is an Equations?

Equations are mathematical statements with two algebraic expressions on either side of an equals (=) sign. It illustrates the equality between the expressions written on the left and right sides. To determine the value of a variable representing an unknown quantity, equations can be solved. A statement is not an equation if there is no "equal to" symbol in it. It will be regarded as an expression.

According to the problem, the total number of coupons sent out was 266. Therefore, we can write an equation based on the information given:

x + 6x = 266

Simplifying and solving for x, we have:

7x = 266

x = 38

Therefore, the number of coupons sent to existing members was 38. To find the number of coupons sent to potential members, we can multiply this number by 6:

6x = 6(38) = 228

Therefore, the number of coupons sent to potential members was 228.

Learn more about equations, by the following link

brainly.com/question/2972832

#SPJ1

Answer:

c, 1/4

Step-by-step explanation:

There are six possibilities when rolling a single dice (1, 2, 3, 4, 5, 6). When rolling two dice, there are 36 combinations because 6x6=36. 1/2 of the numbers on each piece of dice are even, so if we multiply 1/2x1/2, we get an answer of 1/4.

Answer:

cosθ = 3root58 / 58

cscθ = root58 / 7

tanθ = 7/3

Step-by-step explanation:

Draw a picture of the point. You can make a right triangle. One leg is 3 and one leg is 7. You can find the third side with Pythagorean Theorem or distance formula.

see image.

Then use right triangle trigonometry to find cosθ, cscθ, tanθ.

cosθ is the adjacent side over the hypotenuse.



cscθ is sinθ flipped over.

tanθ is opposite side over adjacent side.

see image

Answer:

angle 1 = 54° because this angle is a vertical angle of 54°, and vertican angles are always the same.

angle 2 = 126° because straight line = 180°, and there we have 54°, so 180-54=126°

angle 3 = 126° because this angle is vertical angle to 126°

angle 4 = 121° because this angle is alternative interior angle of the sum of the angles 12(54) and 67°

angle 5 = 59° because angle 5 and angle 4 makes a straight line, staring line = 180°, and 180°-angle 4(121°)= 59°

angle 6 = 121° because this anle is vertican angle of 121°

angle 7 = 59 because this angle is vertical angle of 59°

angle 8 = 59° because this angle is corresponding to angle 5 (59°), and corresponding angles are always the same

angle 9 = 54° because this angle is corresponding angle to 54°

angle 10 = 67 because angle 10, 9 and 8 creates straight line, straight line = 180°, angle 9(54) + angle 8(59)=113, and 180°-113°=67°, that means that angle 10 = 67°

angle 11 = 59 because this angle is corresponding to angle 7 (59°)

angle 12 = 54° because this angle is corresponding angle to angle 1 (54°)

that is it :)

Answer:

See below.

Step-by-step explanation:

We are asked to find the volume of the cereal box.

This cereal box is a rectangular prism, meaning that the cereal box should have 3 given dimensions; Length, Width, and Height.

[tex]Volume = Length \times Width \times Height.[/tex]

We have all 3 dimensions already, now we can solve for the volume.

Substitute:

[tex]Volume = 3 \times 12 \times 18.[/tex]

[tex]Volume = 648in^3.[/tex]

Answer:

The answer to your problem is, B. reflection across the y-axis

Step-by-step explanation:

The relation between preimage and image is defined by the rule

( x,y ) —> ( -x,y )

Reflection across y-axis represented by the above rule.

It means the △ABC is reflected across the y-axis to form​​ △A'B'C' ​.

Thus the answer to your problem is, B. reflection across the y-axis

a)  The p-value is less than the significance level of 0.05, we reject the null hypothesis and conclude that there is evidence to support the alternative hypothesis that μ1 < μ2.

b) We can construct a (1 - α) confidence interval for the difference between the population means μ1 and μ2 to conduct the test

c) The power of the test is approximately 0.012 when μ1 is three units less than μ2.

The test statistic for this hypothesis test is:

t = (x1 - x2) / √(s1²/n1 + s2²/n2)

Plugging in the given values, we get:

t = (6.2 - 7.8) / √(4/15 + 6.25/15) = -2.72

Using a t-distribution with degrees of freedom equal to (15 + 15 - 2) = 28 and a significance level of α = 0.05, we find the critical value to be -1.701. Since the test statistic is less than the critical value, we reject the null hypothesis.

The p-value can be calculated using a t-distribution with degrees of freedom equal to 28:

p-value = P(T < -2.72) = 0.0068

Since the p-value is less than the significance level of 0.05, we reject the null hypothesis and conclude that there is evidence to support the alternative hypothesis that μ1 < μ2.

To conduct the test using a confidence interval, we can construct a (1 - α) confidence interval for the difference between the population means μ1 and μ2:

(x1 - x2) ± t(1-α/2, n1+n2-2) * √(s1²/n1 + s2²/n2)

Plugging in the given values and using a t-distribution with degrees of freedom equal to 28 and a confidence level of 95% (α = 0.05), we get:

(6.2 - 7.8) ± 2.048 * √(4/15 + 6.25/15)

-2.168 < μ1 - μ2 < -0.232

Since the confidence interval does not include zero, we can conclude that there is evidence to support the alternative hypothesis that μ1 < μ2.

The power of a hypothesis test is the probability of correctly rejecting the null hypothesis when the alternative hypothesis is true. In this case, the alternative hypothesis is μ1 < μ2, so we want to calculate the probability of rejecting the null hypothesis when μ1 is actually three units less than μ2.

To do this, we need to calculate the test statistic and find the corresponding probability using a t-distribution with degrees of freedom equal to 28 and a significance level of 0.05.

The test statistic for this case is:

t = (x1 - x2 - Δ) / √(s1²/n1 + s2²/n2) = (6.2 - 7.8 - 3) / √(4/15 + 6.25/15) = -4.14

Using a t-distribution with degrees of freedom equal to 28, we find the probability of correctly rejecting the null hypothesis to be:

power = P(T < -t_crit) = P(T < -1.701 - (-4.14)) = P(T > 2.439) ≈ 0.012

Therefore, the power of the test is approximately 0.012 when μ1 is three units less than μ2. This means that the test is not very sensitive to detecting a difference of three units between the two population means.

Learn more about hypothesis test at https://brainly.com/question/14892273

#SPJ11

The equation which accurately represents the statement as given are; 4.9x - (-3) = 12.8; 3 + 4.9x = 12.8; and 12.8 = 4.9x + 3.

As evident from the task content; the given statement is; Negative 3 less than 4.9 times a number, x, is the same as 12.8.

Therefore, we have ;

4.9x - (-3) = 12.8

Or by evaluation;

3 + 4.9x = 12.8

Or by rearrangement;

12.8 = 4.9x + 3.

On this note, the equations which represent the given word phrase are; 4.9x - (-3) = 12.8; 3 + 4.9x = 12.8; and 12.8 = 4.9x + 3.

Read more on algebraic expressions;

https://brainly.com/question/2164351

#SPJ1

Answer:

they are not similiar

Step-by-step explanation:

..........

There is no answer since we cannot take the square root of a negative trigonometry value. As a result, the issue as presented cannot be resolved.

The area of mathematics called trigonometry examines how triangle side lengths and angles relate to one another. The subject first came to light in the Hellenistic era, about in the third century BC, as a result of the use of geometry in astronomical investigations. The area of mathematics known as exact techniques deals with several trigonometric functions and possible computations using them. There are six common trigonometric functions in trigonometry. These go by the designations sine, cosine, tangent, cotangent, secant, and cosecant, respectively (csc). Trigonometry is the study of triangle characteristics, particularly those of right triangles. Consequently, studying geometry entails learning about the characteristics of all geometric forms.  

Trigonometry can be used to resolve this issue. We'll abbreviate the angle between the stairs and the slide as "".

We must first determine the slide's height. The Pythagorean Theorem allows us to perform the following:

Height 2 equals (slide length)/2 - (distance from step bottom to bottom of slide)/2 Height 2 equals 4.2/2 - 4.9/2 Height 2 equals -7.55

There is no answer since we cannot take the square root of a negative value. As a result, the issue as presented cannot be resolved.

To know more about trigonometry visit:

https://brainly.com/question/29002217

#SPJ1

2) The measure οf angle ZXY is 125 degrees

3) The length οf the rectangle is 25 cm.

If the rectangle has a length οf 'l' and a width οf 'b', then the area οf the rectangle can be cοmputed by using the fοrmula:

Area = length * width

If the ratiο οf the measure οf angle WXZ tο the measure οf angle ZXY is 11:25, we can write this as:

x:y = 11:25

where x is the measure οf angle WXZ, and y is the measure οf angle ZXY.

We knοw that the sum οf the measures οf these twο angles is 180 degrees, since they are angles in a triangle. Therefοre, we can set up an equatiοn:

x + y = 180

We can sοlve this equatiοn fοr x in terms οf y:

x = 180 - y

Nοw we can substitute this expressiοn fοr x intο the ratiο:

(180 - y) : y = 11 : 25

We can crοss-multiply tο get:

25(180 - y) = 11y

Expanding and simplifying:

4500 - 25y = 11y

36y = 4500

y = 125

Therefοre, the measure οf angle ZXY is 125 degrees.

Let's call the width οf the rectangle w and the length οf the rectangle l. We knοw that the ratiο οf width tο length is 4:5, sο we can write:

w:l = 4:5

We alsο knοw that the area οf the rectangle is 500 square centimeters, sο we can write:

w * l = 500

Nοw we can use the ratiο tο sοlve fοr οne οf the variables in terms οf the οther. Let's sοlve fοr w in terms οf l:

w:l = 4:5

w = (4/5)l

Substitute this expressiοn fοr w intο the area equatiοn:

(4/5)l * l = 500

Simplify:

[tex]4l^2/5 = 500[/tex]

[tex]4l^2 = 2500[/tex]

[tex]l^2 = 625[/tex]

[tex]l = 25[/tex]

Therefοre, the length οf the rectangle is 25 cm. Tο find the width, we can use the ratiο:

w:l = 4:5

w = (4/5)l = (4/5) * 25 = 20

Therefοre, the width οf the rectangle is 20 cm.

Hence,

2) The measure οf angle ZXY is 125 degrees

3) The length οf the rectangle is 25 cm.

To learn more about the area of the rectangle, visit:

https://brainly.com/question/2607596

#SPJ1

The answer choice A is x(x + 6)(x + 4), which is the polynomial [tex]x^3 + 10x^2 + 24x[/tex]  fully factored form.

The quadratic expression enclosed in parenthesis can be factored:

x(x + 6)(x + 4)

Algebraic expressions called polynomials include coefficients and variables. Indeterminates are another name for variables. For polynomial expressions, we can do mathematical operations like addition, subtraction, multiplication, and positive integer exponents but not division by variables.[tex]x^2+x-12[/tex] is an illustration of a polynomial with a single variable.

from the question:

The given polynomial is[tex]x^3 + 10x^2 + 24x.[/tex]

From each term, we may factor out the common factor of x:

[tex]x(x^2 + 10x + 24)[/tex]

The quadratic expression enclosed in parenthesis can be factored:

x(x + 6)(x + 4)

As a result, solution option A is the fully factored version of the polynomial [tex]x^3 + 10x^2 + 24x[/tex] , which is x(x + 6)(x + 4).

to know more about polynomials visit:

brainly.com/question/11536910

#SPJ1

Answer:

x>-7

Step-by-step explanation:

The density of the metal sculpture is 6.32 grams per cm³

Density can be defined as the quotient between mass and volume so we can just use the simple formula:

Density = mass/volume

And here we know the two values that we need to use as inputs in the formula above, these values are:

mass = 7.9kg

volume = 1250 cm³

We want the density in grams, then we can rewrite the mass as:

mass = 7.9kg = 7,900 g

Now just take the quotient between the two given quantities, we will get:

Density = 7,900g/1250 cm³ = 6.32 g/cm³

Learn more about density:

https://brainly.com/question/17780219

#SPJ1

If Central angle BAC of circle A measures 23/20 π T radians. Arc BC has a length of 63.48 centimeters. The radius of the circle A is: 55.2cm.

In this case, we know the length of arc BC is 63.48 cm and the central angle BAC measures 23/20 π radians.

Now let find the radius of circle A:

So:

63.48π = (23/20 π)/2π × 2πr

63.48π = 1.15 rπ

Divide both side by 1.15

r = 63.48 /1.15

r =55.2 cm

Therefore we can conclude that the radius of circle A is approximately 55.2 centimeters.

Learn  more about radius here:https://brainly.com/question/27696929

#SPJ1

The complete question is:

Central angle BAC of circle A measures 23/20 π T radians. Arc BC has a length of 63.48 centimeters. What is the radius of the circle? The radius of circle A is