Cu+k.HNO3 --> Cu(No3)2+..........+...........

Answers

Answer 1

Answer:

Cu + HNO3 → Cu(NO3)2 + H2O + NO2

Cu + 4HNO3 → Cu(NO3)2 + 2H2O + 2NO2 (balanced equation)


Related Questions

What is one movement that liquid water CANNOT do while on or at the Earth's surface? (GIVE RIGHT ANSWER OR I DELETE 100 POINTS)

Answers

Answer:

One movement that i can't do is float in mid air

Explanation:

1. How does a virus differ from a common cell?
A. It has no nucleus, cell wall, or organelles.
B. It has two nuclei and no cell wall or organelles.
C. A virus has no cell well, no nucleus, and only organelles for
movement.
D. A virus differs from a cell only in shape.

Answers

The answer is letter C

An experimental measurement was taken of 10.4mL and the actual measurement was 9.7mL. What is the percent error?

Answers

Answer:

13%

Explanation:

Explain what matter is, and all of the states it can have.

Answers

Answer:

matter is anything that occupies space

states of matter : solid,liquid, gas,plasma

Answer:

matter can be anything, tables chairs, literally anything. it has volume and takes up space.

Explanation:

Solids, liquids, gases, plasmas, and Bose-Einstein condensates (BEC)

Every cell is surrounded by a thin membrane. What is the main function of this cell membrane?
A.
to protect the cell from invasion by bacteria and viruses
B.
to allow each cell to form connections with other cells
C.
to limit the size of the cell and keep the shape of the cell the same
D.
to separate the inside of the cell from the outside environment

Answers

Answer:

The main function of the cell membrane is to protect the cell from the outer environment.

Answer: The answer is D.) to separate the inside of the cell from the outside environment

Explanation:

How are tadpoles and larvae similer

Answers

Answer: Tadpole, also called polliwog, aquatic larval stage of frogs and toads. Compared with the larvae of salamanders, tadpoles have short, oval bodies, with broad tails, small mouths, and no external gills. The internal gills are concealed by a covering known as an operculum.

Explanation:

How much water, in grams, can be made from 1.84 × 1024 hydrogen molecules?

Answers

Answer:

55.0g water can be made

Explanation:

To solve this question, we must convert the molecules of H2 to moles using Avogadro's constant. With the moles, and the reaction:

H2 + 1/2O2 → H2O

We can find the moles of H2O = Moles H2 and its mass of using molar mass of water -H2O = 18.01g/mol-

Moles H2 = Moles H2O:

1.84x10²⁴ molecules * (1mol / 6.022x10²³ molecules) = 3.055 moles H2O

Mass:

3.055 moles H2O * (18.01g / mol) = 55.0g water can be made


A certain mass of water was heated with 41,840 Joules, raising its temperature from 22.0°C to 28.5 °C. Find the
mass of the water.

Answers

Answer:

1.5 × 10³ g

Explanation:

Step 1: Given and required data

Transferred heat (Q): 41,840 JInitial temperature: 22.0 °CFinal temperature: 28.5 °CSpecific heat capacity of water (c): 4.184 J/g.°C

Step 2: Calculate the temperature change

ΔT = 28.5°C - 22.0 °C = 6.5 °C

Step 3: Calculate the mass (m) of water

We will use the following expression.

Q = c × m × ΔT

m = Q / c × ΔT

m = 41,840 J / (4.184 J/g.°C) × 6.5 °C = 1.5 × 10³ g

8
What happens to solid waste in the circulatory system?
A it's expelled through the lungs
B
It pumps into the coronary circulation
C
It's dropped off in the kidneys
D
It's deposited in the aorta

Answers

Answer:c it’s dropped off in the kidneys

Explanation:

I took the quiz

The solid wastes are from the circulatory system is expelled to the kidney where, the nitrogenous wastes like urea and uric acid is excreted as urine from the body.

What is circulatory system ?

A circulatory system is an organ system, where the blood is purified and oxygenation of blood takes place. Through circulatory system, the blood reaches throughout the body pumped from the heart through veins.

The organs included in circulatory system are lungs, heart, aorta, veins, blood vessels etc. There are various kinds of blood vessels each having specific functions.

There is a network of blood vessels including arteries and large veins, capillaries that join the venules and other veins. All the nutrients and ions are circulated throughout the body through blood and solid wastes are then expelled to kidney.

Kidney function as a sieve to clean the good fluid from waste products. Uric acid and urea along with water excreated as urine then. Thus, option C is correct.

To find more about circulatory system, refer the link below:

https://brainly.com/question/10103458

#SPJ6

when rolling a number cube 500 times, how many times you expect to get a 3?

Answers

Answer:

[tex]\frac{250}{3}[/tex]

Explanation:

you can expect to get a 3 (theoretically) 1 time every 6 times you roll. A 1/6 chance.

Here's the equation:

[tex]\frac{1}{6} =\frac{x}{500}[/tex]

cross multiply (i think that's what it is called)

500=6x

divide by 6 on both sides:

x=[tex]\frac{250}{3}[/tex] or approx 83 times.

Hope this helps! Lmk if u have more questions <3

What is the limiting reactant in the following equation? How much Fe2O3 will be produced if 2.1 g of Fe reacts with 2.1 g of O2?

4 Fe + 3O2 —> 2Fe2O3

Answers

Answer:

Fe is limiting reactant and 3.00g of Fe2O3 will be produced

Explanation:

To solve this question we must convert the mass of each reactant to moles and, using the reaction we can find limiting reactant. With moles of limiting reactant we can find moles of Fe2O3 and its mass as follows:

Moles Fe -Molar mass: 55.845g/mol-

2.1g * (1mol / 55.845g) = 0.0376 moles

Moles O2 -Molar mass: 32g/mol-

2.1g * (1mol / 32g) = 0.0656 moles

For a complete reaction of 0.0656 moles of O2 are needed:

0.0656moles O2 * (4mol Fe / 3 mol O2) = 0.0875 moles Fe

As there are just 0.0376 moles,

Fe is limiting reactant

The mass of Fe2O3 is:

Moles:

0.0376 moles Fe* (2mol Fe2O3 / 4mol Fe) = 0.0188 moles Fe2O3

Mass:

0.0188 moles Fe2O3 * (159.69g / mol) =

3.00g of Fe2O3 will be produced

How are solutions and compounds similar?

Answers

Answer:

hope you liked it!!!!!!

A compound is a pure substance that is composed of elements chemically bonded in definite proportions. A compound can be broken down into simpler substances only by chemical reactions, such as electrolysis.

A solution is a homogeneous mixture, meaning that it is the same throughout. A solution is composed of one or more solutes dissolved in a solvent. The proportions of the solute(s) can vary, as the components of a solution are not chemically bonded. The components of a mixture can be separated by physical means, such as filtration and distillation

differences between diamond and graphite​

Answers

Answer:

dimond is stronger

Explanation:

Answer:

Graphite and Diamond are different because they have different structures. ... However each carbon atom in Diamond has 4 covalent bonds with other Carbons, making it extremely strong and hard. On the other hand, each carbon in graphite is bonded to three carbons, and therefore graphite is formed in layer

Also:

Each carbon atom in a diamond is linked to four other carbon atoms. Each carbon atom in graphite is linked to three other carbon atoms. Diamond is poor conductor of electricity due to the absence of free electrons. Graphite is good conductor of electricity due to the presence of free electrons in its structure.

Explanation:

Hope this helps

A balloon is inflated to a volume of 8.0 L on a day when the atmospheric pressure is 1.013 bar . The next day, a storm front arrives, and the atmospheric pressure drops to 0.968 bar . Assuming the temperature remains constant, what is the new volume of the balloon, in liters

Answers

Answer:

[tex]V_2=8.4L[/tex]

Explanation:

Hello there!

In this case, according to the definition of the Boyle's law, which describes de pressure-volume behavior as an inversely proportional relationship, it is possible for us to write:

[tex]P_1V_1=P_2V_2[/tex]

Thus, since we are given the initial pressure and temperature, and the final pressure, we are able to calculate the final volume as shown below:

[tex]baV_2=\frac{P_1V_1}{P_2}\\\\V_2=\frac{8.0L*1.013bar}{ 0.968bar}\\\\V_2=8.4L[/tex]

Regards!

how many molecules in 400g of acetic acid

Answers

Answer:chemical formula of acetic acid is  or

so, molecular mass of acetic acid = 2 × atomic mass of C + 4 × atomic mass of H + 2 × atomic mass of O

= 2 × 12 + 4 × 1 + 2 × 16

= 24 + 4 + 32

= 60g/mol

given mass of acetic acid = 22g

so, no of moles of acetic acid = given mass/molecular mass

= 22/60 ≈ 0.367

so, number of moles of acetic acid is 0.367mol

number of molecules in 0.367 mol of acetic acid = 6.022 × 10²³ × 0.367

= 2.21 × 10²³

Explanation:

A 0.150-kg sample of a metal alloy is heated at 540 Celsius an then plunged into a 0.400-kg of water at 10.0 Celsius, which is contained in a 0.200-kg aluminum calorimeter cup. The final temperature of the system is 30.5 Celsius. What is the specific heat of the metal alloy in J/Kg.Celsius

Answers

Answer:

[tex]C_{alloy}=0.497\frac{J}{g\°C}[/tex]

Explanation:

Hello there!

In this case, according to this calorimetry problem on equilibrium temperature, it is possible for us to infer that the heat released by the metal allow is absorbed by the water for us to write:

[tex]Q_{allow}=-(Q_{water}+Q_{Al})[/tex]

Thus, by writing the aforementioned in terms of mass, specific heat and temperature, we have:

[tex]m_{alloy}C_{alloy}(T_{eq}-T_{alloy})=-(m_{water}C_{water}(T_{eq}-T_{water})+m_{Al}C_{Al}(T_{eq}-T_{Al})[/tex]

Then, we solve for specific heat of the metallic alloy to obtain:

[tex]C_{alloy}=\frac{-(m_{water}C_{water}(T_{eq}-T_{water})+m_{Al}C_{Al}(T_{eq}-T_{Al})}{m_{alloy}(T_{eq}-T_{alloy})}[/tex]

Thereby, we plug in the given data to obtain:

[tex]C_{alloy}=\frac{-(400g*4.184\frac{J}{g\°C} (30.5\°C-10.0\°C)+200g*0.900\frac{J}{g\°C}(30.5\°C-10.0\°C)}{150g(30.5\°C-540\°C)} \\\\C_{alloy}=0.497\frac{J}{g\°C}[/tex]

Regards!

PLEASE HELP I HAVE 19 MINUTES LEFT I WILL MARK BRAINLIEST
How much more acidic is a pH of 4 as compared to a pH of 6.5?

Answers

Answer:

316.227766

Explanation:

Answer 3.16 hope it helps

There are four stages to the classical demographic transition model Pre-transitional Europe was characterized by high and
fluctuating mortality and a high birth rate. The transition model began to progress into and through stage 2 in the late 18th and early
19th century. All BUT ONE contributed to the decline in mortality.
S- -1]))
A)
Enacting measures to provide clean water supplies.
B)
Public health advances including quarantine of settlements undergoing
epidemics
The development of vaccines to prevent disease and antibiotics to treat
infection.
D)
Widespread acceptance of germ theory resulting in more hygienic
practices, including hand washing and sterilizing medical equipment and
infants' bottles.

Answers

The answer is D! Explaination:

A student pours 10.0 g of salt into a container of water and observes the amount of time it takes for the salt to dissolve. She then repeats the process using the same amounts of salt and water but this time she slowly stirs the mixture while it is dissolving. The student performs the experiment one more time but this time she stirs the mixture rapidly.

Answers

Answer:

It will go faster each time because she is stirring therefore the water can get to the salt faster than it just sitting at the top

Explanation:

12. An electrolysis reaction is
A. hydrophobic.
B. spontaneous.
C. exothermic.
D. non-spontaneous.

Answers

Answer: D.) non-spontaneous.

Explanation:

Determine the hydroxide ion concentration in
a solution that is 0.00034 M Ca(OH)2.
Answer in units of M.

Answers

Answer:

[tex]0.00068M[/tex]

Explanation:

Hello there!

In this case, according to the ionization of calcium hydroxide, a strong base:

[tex]Ca(OH)_2\rightarrow Ca^{2+}+2OH^-[/tex]

Thus, since there is a 1:2 mole ratio of calcium hydroxide to hydroxide ions, we apply the following proportional factor to obtain:

[tex]0.00034\frac{molCa(OH)_2}{L}*\frac{2molOH^-}{1molCa(OH)_2} \\\\=0.00068\frac{OH^-}{L}\\\\=0.00068M[/tex]

Regards!

How can heat energy transform from mechanical energy?

A)Burning
B)Friction
C)Light
D)Flames

Answers

Answer:

A

Explanation:

brainliest pls

I think it might be B because the mechanical energy can convert into heat and the heat converts to some mechanical energy. Mechanical is similar to heat. This means that’ one is able to change the internal energy of a system by either physically putting work to the system or adding heat to the system. It seems to me that motion is similar to friction because friction is caused by motion. honestly i’m not sure if this is right but i tried my best. i’m so sorry if i get this wrong

1. Which individuals are most likely to die before reproducing, those with adaptive traits or
nonadaptive traits? Why? (Hint: You may use the newt population as an example in your
explanation.)

Answers

Nonadaptive traits .

Inquiry Extension Consider a reaction that occurs between solid potassium and chlorine gas. If you start with an initial mass of 15.20 g K, and an initial mass of 2.830 g Cl2, calculate which reactant is limiting. Explain how to determine how much more of the limiting reactant would be needed to completely consume the excess reactant. Verify your explanation with an example

Answers

The 3.13 g of K would be needed to completely react with the remaining [tex]Cl_2[/tex].

To determine which reactant is limiting, we need to calculate the amount of product that can be formed from each reactant and compare them. The reactant that produces less product is the limiting reactant, since the reaction cannot proceed further once it is consumed.

The balanced chemical equation for the reaction between solid potassium and chlorine gas is:

2 K(s) + [tex]Cl_2[/tex](g) -> 2 KCl(s)

From the equation, we can see that 2 moles of K react with 1 mole of [tex]Cl_2[/tex] to form 2 moles of KCl.

First, we need to convert the masses of K and [tex]Cl_2[/tex] into moles:

moles of K = 15.20 g / 39.10 g/mol = 0.388 mol

moles of [tex]Cl_2[/tex] = 2.830 g / 70.90 g/mol = 0.040 mol

Now, we can use the mole ratio from the balanced equation to calculate the theoretical yield of KCl from each reactant:

Theoretical yield of KCl from K: 0.388 mol K x (2 mol KCl / 2 mol K) = 0.388 mol KCl

Theoretical yield of KCl from [tex]Cl_2[/tex]: 0.040 mol [tex]Cl_2[/tex] x (2 mol KCl / 1 mol [tex]Cl_2[/tex]) = 0.080 mol KCl

We can see that the theoretical yield of KCl from K is 0.388 mol, while the theoretical yield of KCl from [tex]Cl_2[/tex] is 0.080 mol. Therefore, the limiting reactant is [tex]Cl_2[/tex], since it produces less product.

To determine how much more of the limiting reactant would be needed to completely consume the excess reactant, we can use the stoichiometry of the balanced equation.

We know that 1 mole of [tex]Cl_2[/tex] reacts with 2 moles of K to produce 2 moles of KCl. Therefore, the amount of additional K needed to react with the remaining [tex]Cl_2[/tex] can be calculated as follows:

moles of K needed = 0.040 mol [tex]Cl_2[/tex] x (2 mol K / 1 mol [tex]Cl_2[/tex])

                                = 0.080 mol K

This means that 0.080 moles of K would be needed to completely consume the remaining [tex]Cl_2[/tex]. We can convert this to a mass by multiplying by the molar mass of K:

mass of K needed = 0.080 mol K x 39.10 g/mol

                              = 3.13 g K

Therefore, The 3.13 g of K would be needed to completely react with the remaining.

Example verification:

Suppose we had an additional 0.50 g of [tex]Cl_2[/tex] in the reaction. Would all of the K be consumed, or would there still be excess K?

Moles of additional [tex]Cl_2[/tex] = mass of [tex]Cl_2[/tex] / molar mass of [tex]Cl_2[/tex]

Moles of additional [tex]Cl_2[/tex] = 0.50 g / 70.90 g/mol

Moles of additional [tex]Cl_2[/tex] = 0.0070 mol

The theoretical yield of KCl that can be formed from the additional [tex]Cl_2[/tex] is:

0.0070 mol [tex]Cl_2[/tex] x (2 mol KCl / 1 mol [tex]Cl_2[/tex]) x (74.55 g KCl / 1 mol KCl) = 1.04 g KCl

Therefore, the total amount of KCl that can be formed from all of the [tex]Cl_2[/tex] is:

5.95 g + 1.04 g = 6.99 g

The amount of K that would be needed to completely consume all of the [tex]Cl_2[/tex].

Learn more about Solid Potassium at

brainly.com/question/27549056

#SPJ1

Cell membranes are selectively permeable. This means that A. only water can move freely across the cell membrane. B. any substance can move across the cell membrane, but chemical energy will always be required. C. some substances can move freely across the cell membrane, while others must be transported. D. no substances can move freely across the cell membrane.

Answers

Answer:

C. some substances can move freely across the cell membrane, while others must be transported.

Explanation:

Hl Weakly dissociates in water according to the chemical equation below. H20+ Hl <-> H3O^+ + l- What is a conjugate acid-base pair in this reaction?

Answers

Answer:

https://www.clutchprep.com/chemistry/practice-problems/70217/hi-aq-h2o-l-h3o-aq-i-aq-identify-each-as-either-a-bronsted-lowry-acid-bronsted-l

Explanation:

https://www.clutchprep.com/chemistry/practice-problems/70217/hi-aq-h2o-l-h3o-aq-i-aq-identify-each-as-either-a-bronsted-lowry-acid-bronsted-l

If 3.13 mol of an ideal gas has a pressure of 2.33 atm and a volume of 72.31 L, what is the temperature of the sample in degrees Celsius?

Answers

Answer:

382.49 C degree Celsius

Explanation:

Hello,

This problem deals with understanding the ideal gas law which hopes to predict how ideal gases might behave in any given condition. I listed the formula below and we are basically just going to solve for temperature by rearranging the equation as seen on the picture (there's also other rearranged ones in case you need to solve for those).

Universal gas constant R has a value of 0.0821 L * atm/(mole * K) when working with these given units so it will be part of this equation. R value changes based on what units you have.

T = PV/nR

   = (2.33) (72.31) / (3.13)(0.0821)

   = 655.64 K

Question is asking temperature in celsius so we employ the formula attached below:

C = K - 273.15

   = 655.64-273.15

    = 382.49 degree Celsius

382.49 degree Celsius is the answer!

130 cm of a gas at 20°C exerts a pressure of
750 mm Hg. Calculate its pressure if its volume
is increased to 150 cm3 at 35 °C.​

Answers

Answer: The pressure is 1137.5 mm Hg its pressure if its volume is increased to 150 [tex]cm^{3}[/tex] at 35 °C

Explanation:

Given: [tex]P_{1}[/tex] = 750 mm Hg,    [tex]V_{1} = 130 cm^{3}[/tex],     [tex]T_{1} = 20^{o}C[/tex]

[tex]P_{2}[/tex] = ?,          [tex]V_{2} = 150 cm^{3}[/tex],            [tex]T_{2} = 35^{o}C[/tex]

Formula used to calculate the new pressure is as follows.

[tex]\frac{P_{1}V_{1}}{T_{1}} = \frac{P_{2}V_{2}}{T_{2}}[/tex]

Substitute the values into above formula as follows.

[tex]\frac{P_{1}V_{1}}{T_{1}} = \frac{P_{2}V_{2}}{T_{2}}\\\frac{750 mm Hg \times 130 cm^{3}}{20^{o}C} = \frac{P_{2} \times 150 cm^{3}}{35^{o}C}\\P_{2} = 1137.5 mm Hg[/tex]

Thus, we can conclude that the pressure is 1137.5 mm Hg its pressure if its volume is increased to 150 [tex]cm^{3}[/tex] at 35 °C.

200.0g of a 3.0% NaF solution, how much distilled water do we weigh out?

197g of distilled water
194g of distilled water
140g of distilled water
170g of distilled water

Answers

Answer:

194g of distilled water.

Explanation:

Hello there!

In this case, according to the given information for this problem, it turns out possible for us to use the given mass of the solution and the percent by mass of NaF to firstly calculate the grams of this solute as shown below:

[tex]\%m=\frac{m_{solute}}{m_{solution}} *100\%\\\\m_{solute}=\frac{\%m*m_{solution}}{100\%} \\\\m_{solute}=\frac{3.0\%*200.0g}{100\%} \\\\m_{solute}=6g[/tex]

And finally, since the mass of solution is calculated by adding mass of solute and mass of solvent we obtain the mass of water (solvent) as follows:

[tex]m_w=200g-6g=194g[/tex]

Therefore, the answer is 194g of distilled water

Regards!

PLEASE HELP!! ORGANIC CHEMISTRY

A sample of a diatonic gas is loaded into an evacuated bottle at STP. The 0.25 L bottle contains 1.76 grams of the unidentified gas. Calculate the molar mass of the gas. What is the identity of the diatomic gas?

Answers

Answer:

(a) 157.7 g

(b) 7.04 g/dm³

Explanation:

(a) From the question,

According to Avogadro's Law,

1 mole of every gas at STP occupies a volume of 22.4 dm³

But mass of 1 mole of the diatomic gas  = molar mass of the gas.

This Implies that,

The molar mass of the gas at STP occupies a volume of 22.4 dm³

From the question,

If,

0.25 L bottle contain 1.76 g of the gas,

Therefore,

Molar mass of the gas = (1.76×22.4)/0.25

Molar mass of the gas = 157.7 g.

(b) Density of the gas = mass/volume

D = m/v

Given: m = 1.76 g, v = 0.25 L = 0.25 dm³

Therefore,

D = 1.76/0,25

D = 7.04 g/dm³

Other Questions
Hey luvs!The endpoints of AB are A(1,4) and B(5,-1). What are the coordinates of the point that divides AB in the ratio2:3? HELP ME PLEASEEEEEEEEEEEEEEEEEEE Its important to___routine short trips All dimensions of a cylinder are multiplied by 1.5. Which statement is true?A. The total surface area is multiplied by 3.375.The volume is multiplied by 2.25.B. The total surface area is multiplied by 2.25.The volume is multiplied by 3.375.C. The total surface area is multiplied by 3.The volume is multiplied by 4.5.D. The total surface area is multiplied by 4.5.The volume is multiplied by 3. Match the parts of a CPU to their functions.-control unit-ALU-registerIs a temporary data storage unitmanages data transfer operationsperforms arithmetic and logical operations on input data These single-celled organisms can be pathogenic but some can also be edible.A.bacteriaB.virusesC.protozoaPlease select the best answer from the choices provided.ABC Potassium hydroxide is partially soluble as shown by thefollowing reaction:KOH(s) K+ (aq) + OH(aq)What is the poH of a 3.32 x 10-5 M KOH solution?pOH =Your answer should be rounded to three significant figures. Do not Includeunits in your answer. Helppppsshdhdhhfhdjdjsj please An arborist examined trees in an orchard to see if they were infected with a virus. The arborist counted 7 infected trees and 43 healthy trees. What percentage of the trees in the orchard were infected? A trademark is a type of patent. True or False? Absorbe nutrientes por medio de micro vellosidades que recubren y aumentan la superficie de absorcin HELPPPPPPP PLZZZZZZZZ to promise and deliver a future result when rolling a number cube 500 times, how many times you expect to get a 3? A box contains 7 red marbles, 4 white marbles, and 5 blue marbles. If only white marbles are added to the box, how many must be added tomake the probability of drawing a white marble ?A: 1B: 2C: 5D. 7E: 12 John has a box of nails. The box contains 65 small nails, 40 medium nails, and 45 large nails. Susan has a box of nails that has the same proportion of small, medium, and large nails as John's box. There are 176 medium nails in Susan's box.What is the total number of nails in Susan's box? A semi-trailer in the shape of a rectangular prism, has inside measurements of 53 feet, 8 feet, and 8.5 feet. What is the volume of the trailer? experiment yeast fermentation what is the purpose of boiling the glucose solution earlier Consider three point charges, q1 = 4.50 C, q2 = 4.50 C, and q3 = 6.30 C, located at the corners of an isosceles triangle. The charges q1 and q2 are 5.00 m apart and form the base. The triangle is 3.50 m high, and q3 is located at the top. Calculate the magnitude and direction of the resultant force on q3. who is president of the untied States