Compare the amount of kinetic energy of particles in each state of matter- solid, liquid, gas

Answers

Answer 1

Answer:

gas moves around the most so it would have the most kinetic energy and solids would have the least as they only vibrate a tiny bit(not visible to the naked eye)


Related Questions

Iron, Nickel, Copper, Zinc... These are all what kind of metals?

Answers

Answer:

there very old

Explanation:

What is the surface temperature of Sirius B in Kelvins?

Answers

Answer: The surface temperature of Sirius B is 25,200 Kelvins(K).

Explanation: You would think Sirius would have a surface temperature of 9,940 Fahrenheit. That is somewhat correct, but Sirius is a binary star consisting of a main-sequence star of spectral type A0 or A1, termed Sirius A, and a faint white dwarf companion of spectral type DA2, termed Sirius B. Sirius, Sirius A, and Sirius B, are all different stars. Sirius A has a temperature of 9,940 Kelvins, but Sirius B has a temperature of 25,200 Kelvins(K).

That would be 9,940 kelvins (K)

Hope it helps! :D

For the equation BaCl2 + Na2SO4 → BaSO4 + 2NaCl, how many chlorine atoms are on the reactants side and on the products side?

Answers

Answer:2 reactants 2 products.

this is a balanced chemical equation. That means the number of chlorine before the arrow will be the same after the arrow

Explanation: i think this answer will help you very much

Calculate the force of gravity of a 25kg block resting on the earth (M=5.97x10^24kg). The radius of the earth is 6.38x10^6m.

I already know...
[tex](6.67*10^{-11})(25)(5.97*10^{24} )/(6.38*10^6)^2[/tex]

But I don't understand what steps I have to take to solve that equation

Answers

From Newton's law of gravity, the force of gravity is 245 Newtons

To calculate the force of gravity of a 25kg block resting on the earth of mass M = 5.97x10^24kg with the radius r of the earth is 6.38x10^6m, let us first list out all the given parameters

Mass m = 25 kg

Mass of the earth M = 5.97x10^24kg

Radius r = 6.38x10^6m

Force F = ?

The formula to calculate the force of gravity is

F = (GMm)/[tex]r^{2}[/tex]

Where G = 6.67 x [tex]10^{-11}[/tex]

Substitute all the parameters

F = (6.67 x [tex]10^{-11}[/tex] x 5.97x10^24 x 25) / (6.38x10^6)^2

F = 9.9 x [tex]10^{15}[/tex] / 4.07 x [tex]10^{13}[/tex]

F = 244.56 N

F = 245 Newtons (approximately)

Therefore, the force of gravity is 245 Newtons

Learn more about force of gravity here: https://brainly.com/question/557206

in the bohr model, what is the ratio of its kinetic energy to its potential energy?

Answers

The centrifugal force C = mv^2/r = kq^2/r^2 = P centripetal force. m is the electron mass, q are the proton and electron charges (opposites), and r is the Bohr radius.

Thus 1/2 mv^2/r = 1/2 kq^2/r^2 and KE = 1/2 mv^2 = 1/2 kq^2/r = 1/2 PE

Therefore KE/PE = 1/2, no matter what state the electron is in.

The distance between adjacent nodes in a standing wave pattern is 25.0 cm. What is the
wavelength? If the frequency is 200. Hz, what is the speed of the wave?

Answers

Answer:

Answer:

Speed of the wave in the string will be 3.2 m/sec

Explanation:

We have given frequency in the string fixed at both ends is 80 Hz

Distance between adjacent antipodes is 20 cm

We know that distance between two adjacent anti nodes is equal to half of the wavelength

So \frac{\lambda }{2}=20cm

2

λ

=20cm

\lambda =40cmλ=40cm

We have to find the speed of the wave in the string

Speed is equal to v=\lambda f=0.04\times 80=3.2m/secv=λf=0.04×80=3.2m/sec

So speed of the wave in the string will be 3.2 m/sec

The solar mass of the Sun is 1. The orbital period of Jupiter is 11. 9 Earth years. What is the distance between Jupiter and the Sun? 5. 2 AU 41 AU 52 AU 410 AU.

Answers

The distance between Jupiter and the sun is 5.2 AU.

According to Kepler's third law, the square of the period of revolution of planets is proportional to the cube of their mean distances from the sun. From this; T^2 = r^3.

Now, we are told that the orbital period (T) is 11. 9 Earth years. We have to make the distance the subject of the formula.

r =T^2/3

r = (11.9)^2/3

r = 5.2 AU

Learn more: https://brainly.com/question/15207516

Answer:

The answer is A. 5.2 AU

Explanation:

in jus dat ni ni fr

Determine the percent composition of chromium (III) flouride CrF3
(Show your solution)​

Answers

Answer:

Molar mass of CrF3, Chromium(III) Fluoride is 108.9913096 g/mol

51.9961+18.9984032·3

Mass percentage of the elements in the composition

Element Symbol Atomic Mass Number of Atoms Mass Percent

Chromium Cr 51.9961 1 47.707%

Fluorum F 18.9984032 3 52.294%

Notes on using the Molar Mass Calculator

Chemical formulas are case-sensitive.

Enter subscripts as simple numbers.

The converter uses a simple dot instead of using a midpoint typographic dot (·) in formulas for adduct molecules, such as water of hydration.

Example: type CuSO4.5H2O instead of CuSO₄·5H₂O.

Explanation:

please mark my answer in brainlist plz

An object of length 3.00 cm is inside a plastic block with index of refraction 1.40. If the object is viewed from directly above, what is the length of its image?

Answers

The length of its image = [tex]-3cm[/tex]

Given,

length of object, [tex]h_o = 3 cm[/tex]

We know, for flat refracting surface,  

Image distance = object distance

So,

magnification is = [tex]-1[/tex]

length of the image,

[tex]h_i = magnification * h_o\\\\h_i = -1 * 3 \\\\h_i = -3cm[/tex]

Here, negative sign means inverted image.

For more information on refraction, visit

https://brainly.com/question/14760207?referrer=searchResults

How does the temp of water change when it is heated on a stove top and it begins to boil.

Answers

Answer:

The temperature will no longer rise with the heat because the energy. When the water is boiled on the steam, the temperature rises when heat is given

Explanation:

NEES HELP!!!!
Which of the following is "NOT" a theory of the formation of the universe?
A. Steady State Theory
B. Doppler Theory
C. Oscillating Theory
D. Big Bang Theory

Answers

Answer:

Doppler Theory

Explanation:

it's a theory regarding the change in wave frequency during the relative motion between a wave source and its observer.

An external force of 25 N acts on a system for 10 s. What is the impulse delivered to the system?

Answers

Answer:

I = 250N*s

Explanation:

I = F*t

I =  impulse or momentum

F = Force

t = time

I = 25N*10s

I = 250N*s

PE:

Write T in the blank if the statement is true and E if it is false.

_____1. A basketball game starts with a jump ball.

_____2. Basketball is a cardiovascular work-out.

_____3. The middle of the basketball court is called the sideline.

_____4. Unlimited substitutions are allowed during a regular basketball game.

_____5. If the ball crosses the sideline, it is considered out of bounds and goes to the other team.

_____6. A turnover is any loss of the ball without a shot being taken.

_____7. A player may intentionally kick the ball for the team's benefit.

_____8. When dribbling a ball, a basketball you want to keep the ball below your waist and off to the side of your body.

_____9. If your opponent shoots at the wrong hoop your team receives the points.

_____10. After a player stops dribbling the ball in basketball, he or she is allowed 4 steps to pass or shoot.​

Answers

Answer:

The answers are:

T, T, F, F, T, T, F, F, T, T, F

Good luck!

Which car will experience a greater KE, a car traveling at 16 m/s or a half as massive car traveling at 32 m/s

Answers

Answer:

The car that is hald as massive

Explanation:

We can use the eqation for kinetic energy to solve this problem

KE = 1/2mv^2 (where m is mass and v is velocity/speed)

Lets give the original car a mass of 100kg and use the equation

KE = 1/2(100kg)(16m/s)^2 = 12800J

and now lets find kinetic energy of the half as massive car

KE2 = 1/2(50kg)(32m/s)^2 = 25600J

From this, we find that the hald as massive car will experience a greater kinetic energy while travling at double the velocity

1) A blinking light of constant period is situated on a lab cart. Which diagram best represents a photograph of
the light as the cart moves with constant velocity?
How do I solve this?

Answers

Option C with uniform displacement at each time interval represents the photograph of light as the cart moves with constant velocity.

At constant velocity, the change in displacement with time is uniform. The displacement of the given object in motion increases at equal rate.

At constant velocity, the initial velocity is equal to the final velocity.

v₁ = v₂

The acceleration of the object at constant velocity is zero, because the change in velocity with time will be zero.

[tex]a = \frac{\Delta v}{\Delta t} \\\\a = \frac{v_2- v_1}{t} \\\\v_2 = v_1\\\\a = \frac{v_1 - v_1}{t} \\\\a = 0[/tex]

Thus, from the given options we can conclude that option C with uniform displacement at each time interval represents the photograph of light as the cart moves with constant velocity.

Learn more about constant velocity here: https://brainly.com/question/24710528

Why would poor clusters of galaxies be more likely to have irregular shapes then rich
clusters

Answers

Other clusters with hundreds to thousands of galaxies are called rich clusters. The low mass of a poor cluster prevents the cluster from holding onto its members tightly. The poor cluster tends to be a bit more irregular in shape than a rich cluster. Each large spiral has several smaller galaxies orbiting them.

These Milky Way companion galaxies are easily visible from dark locations in the Southern Hemisphere. Prime examples of erratic galaxies are the Large and Small Magellanic clouds (left and right, respectively).

What clusters of galaxies likely to have irregular shapes?

In comparison to a rich cluster, the poor cluster typically has a slightly more erratic shape. A number of smaller galaxies orbit each major spiral. The Small and Large Magellanic clouds are the two most well-known examples of atypical galaxies.

When two galaxies collide, irregular galaxies frequently result. This unusual Cartwheel Galaxy was created when a tiny galaxy slid through the centre of a massive spiral galaxy.

Therefore, Rich clusters are other clusters that include hundreds to thousands of galaxies. A weak cluster can't cling to its members strongly because of its low bulk.

Learn more about galaxies  here:

https://brainly.com/question/8628958

#SPJ2

A go cart with a mass of 60 kg is moving at a rate of 10 m/s. How much Kinetic Energy does the go cart have?

Answers

Answer:

3000 J

Explanation:

The kinetic energy of an object can be found by using the formula

[tex]k = \frac{1}{2} m {v}^{2} \\ [/tex]

m is the mass in kg

v is the velocity in m/s

From the question

m = 60 kg

v = 10 m/s

We have

[tex]k = \frac{1}{2} \times 60 \times {10}^{2} \\ = 30 \times 100 \\ = 3000[/tex]

We have the final answer as

3000 J

Hope this helps you

Answer:

[tex]\boxed {\boxed {\sf 3000 \ J}}[/tex]

Explanation:

Kinetic energy is the energy an object has due to motion. It is calculated using the following formula:

[tex]KE=\frac{1}{2} mv^2[/tex]

The mass of the go-cart is 60 kilograms and the velocity is 10 meters per second.

m= 60 kg v= 10 m/s

Substitute the values into the formula.

[tex]KE= \frac{1}{2} (60 \ kg)(10 \ m/s)^2[/tex]

Solve the exponent.

(10 m/s)² = 10 m/s * 10 m/s = 100 m²/s²

[tex]KE = \frac{ 1}{2} (60 \ kg)(100 \ m^2/s^2)[/tex]

Multiply the numbers together.

[tex]KE= 30 \ kg * 100 \ m^2/s^2[/tex]

[tex]KE= 3000 \ kg*m^2/s^2[/tex]

Convert the units. 1 kilogram meter squared per second squared is equal to 1 Joule, so our answer of 3000 kg*m²/s² equals 3000 Joules.

[tex]KE= 3000 \ J[/tex]

The go-cart has 3000 Joules of kinetic energy.

Two parents are having a child The father has freckles which are a dominant trait The mother does not have trecktes Find the possibility of the chad having tracks. ​

Answers

Answer:

2:3

Explanation:

mathqway

what is the capacitance of capacitor​

Answers

Answer:

The capacitance C of a capacitor is defined as the ratio of the maximum charge Q that can be stored in a capacitor to the applied voltage V across its plates. In other words, capacitance is the largest amount of charge per volt that can be stored on the device: C = Q V . 1 F = 1 C 1 V .

Explanation:

A capacitor's capacity to hold an electric charge when a potential difference (voltage) is applied across its plates is measured by the capacitance of the device.

It can be calculated using the formula C = Q/V,

where Q is the electric charge stored on the capacitor in coulombs (C), C is the capacitance in farads (F), and V is the voltage across the capacitor in volts (V). The capacitor's physical properties, such as the area of the plates, the space between them (dielectric separation), and the substance between the plates (dielectric constant), all affect capacitance. A better charge storage capability is indicated by a higher capacitance value.

To know more about capacitance, here

brainly.com/question/31871398

#SPJ2

which distance indicator can be used to measure the most distant objects?

Answers

The distance indicator can be used to measure the most distant objects among all indicators stated above is Type Ia supernovae

In the field of Astronomy, there are different kind of distance indicators that can be used to measure the distance objects.

Few among them are :

Cepheids Type Ia supernovae Parallax Main-sequence fitting

Cepheid variables can be measured up to 18 million light years.

The expansion rate of the universe can also be measured by trying to measure the apparent brightness of the Type Ia supernovae

Parallax means illusory state of an object when viewed from different points

Main sequence fitting makes use of a H-R diagram of the cluster to determine the distance to a stellar cluster.

The distance indicator can be used to measure the most distant objects among all indicators stated above is Type Ia supernovae

Learn more about Astronomy here: https://brainly.com/question/1141458

astronomers have determined the surface temperature of stars by studying their colors. what color emission represents stars with the hottest temperatures?

Answers

Answer:

Blue

Explanation:

Did the question already

23 and 24 only please help!

Answers

Answer:

23: Acceleration 24:1m/s^2

Explanation:

[tex]a = (v_f - v_i) /delta(t)\\a=(16-10)/6\\a=6/6\\a=1m/s^2[/tex]

Which of the following is the goal of physical fitness test? *

a. to determine the level of fitness.
b. to identify the area of development/improvement.
c. all of the above
d. to identify strengths and weaknesses.

Answers

Answer

C

hope this helps!!

*please mark brainliest if correct!! Trying to level up!!

An open train car rolls along a track while it is being filled with sand. There is negligible friction. As a result of
the accumulating sand, what happens to the speed of the train car? (Assume negligible friction and the cart is
just rolling along, not receiving any additional force to regulate its speed.)

Answers

Answer:

Explanation:

that`s a the train car, that you asked the meaning, of that if the train car rolls it`s doing it`s speed, and it`s not ganna fall off the the trail of the train, car.

An open train car rolls along a track while it is being filled with sand. There is negligible friction. The speed of the train car will be slowed down.

What is friction?

Between two surfaces that are sliding or attempting to slide over one another, there is a force called friction. For instance, friction makes it challenging to push a book down the floor.

Friction always moves an object in a direction that is counter to the direction that it is traveling or attempting to move.

Speed indicates the rate of movement of something or someone. If you know how far something has traveled and how long it took to get there, you can calculate its average speed. Speed is calculated as follows: speed = distance x time.

Therefore, an open railway car is packed with sand and is rolling along a track. Very little friction exists. The railway car's speed will be slowed down.

To learn more about friction, refer to the link:

https://brainly.com/question/13000653

#SPJ2

Explain briefly about viscous force ​

Answers

The viscous force ​refers to the resistance of a fluid to flow.  It is measured in Newton-second per square meter.

The viscous force can be defined as the resistance that a fluid has to flow in a given space.

Viscous force is proportional to the fluid velocity, while this constant is called viscosity.

The viscous force can be measured in Newton-second per square meter (abbreviated as N s/m2).

Learn more about viscous force here:

https://brainly.com/question/5396031

A bicycle accelerates from rest to 6m/s in a distance of 50m, calculate the acceleration

Answers

50x6=300 this is the answer I think

The acceleration of the bicycle is 0.12 m/[tex]s^{2}[/tex].

We know that acceleration is the change in velocity divided by the change in time. In this case, the bicycle is accelerating from rest to a velocity of 6 m/s. The change in time is the time it takes the bicycle to travel 50 m.

We can use the following equation to find the acceleration:

a = (v2 - v1) / t

where:

a is the acceleration

v2 is the final velocity (6 m/s)

v1 is the initial velocity (0 m/s)

t is the time

Plugging in the values from the problem, we get:

a = (6 m/s - 0 m/s) / 50 s

= 0.12 m/[tex]s^{2}[/tex].

Therefore, the acceleration of the bicycle is 0.12 m/[tex]s^{2}[/tex].

To know more about acceleration here

https://brainly.com/question/2303856

#SPJ3

Two billiard balls having the same mass and speed roll directly toward each other. What is their combined momentum after they meet

Answers

Their combined momentum after they meet is 0.

What is law of conservation of momentum?

According to the law of conservation of momentum, absent an external force, the combined momentum of two or more bodies operating upon one another in an isolated system remains constant. As a result, momentum cannot be gained or lost.

Let the mass of each billiard balls = m.

If the initial velocity of first ball is u; according to the question, the initial velocity of the second ball be -u.

Hence, initial momentum of the first ball is: P₁ = mu

initial momentum of the second ball is: P₂ = -mu

Hence, total initial momentum of the two balls = P₁ + P₂ = mu + ( -mu) = 0.

So, according to law of conservation of momentum:

Their combined momentum after they meet is = 0.

Learn more about momentum here:

https://brainly.com/question/29113044

#SPJ5

The combined momentum of the two billiard balls after they meet is zero.

When two pool balls of the same size and speed roll directly at each other and collide, their momentum will increase.

Let us denote the speed of the first ball as [tex]\rm p_1[/tex] and the speed of the second ball as [tex]\rm p_2[/tex]. The momentum of the balls are equal in magnitude but opposite in direction because they have the same mass and velocity.

[tex]\rm p_1= -p_2[/tex]

When the balls collide, their momentum increases:

Total momentum after the collision= [tex]\rm p_1+ p_2[/tex]

Substituting the relationship

[tex]\rm p_1= -p_2[/tex]

Total momentum after the collision

[tex]\rm p_1- p_1= 0[/tex]

Therefore, the combined momentum of the two billiard balls after they meet is zero.

Learn more about momentum, here:

https://brainly.com/question/30677308

#SPJ3

pls answer this question is due today​

Answers

Answers:Speed for section A = 15 km per hourSpeed for section B = 0 km per hourSpeed for section C = 60 km per hourSpeed for section D = 40 km per hour

=============================================

Explanation:

To compute the speed, we divide the distance traveled over the time duration.

For instance, if a car goes 100 km in 5 hours, then its speed is 100/5 = 20 km per hour.

-----------------

For section A, the car travels 30 km over the course of 2 hours (since 11:00-9:00 = 2:00)

speed = distance/time = (30 km)/(2 hrs) = 15 km/hr

-----------------

We don't need to do any computations for section B. It's a flat horizontal line, so the speed is zero. There's no change in distance, so the car is stationary for this 1 hour period.

You could say speed = distance/time = 0/1 = 0 km/hr if you wanted.

-----------------

For section C, its change in distance is 60-30 = 30 km and the change in time is 0.5 hour (because it spans from 12:00 to 12:30)

So, speed = distance/time = (30 km)/(0.5 hr) = 60 km/hr

The steeper slope of section C, compared to section A, means the car is going faster.

-----------------

Section D spans from 12:30 to 14:00. This is a time period of 14:00-12:30 = 1:30 = 1.5 hours. The change in distance is 60 km

(60 km)/(1.5 hrs) = 40 km/hr

The speed of the car during section D is 40 km per hour.

Side note: if you were talking about velocities instead of speeds, then section D would have a negative velocity of -40 km/hr to indicate the car is going the opposite direction (compared to sections A and C). However, speed is always nonnegative.

Solve the science problem

Answers

Answer:

ybuTouch and hold a clip to pin it. Unpinned clips will be deleted after 1 hour.Touch and hold a clip to pin it. Unpinned clips will be deleted after 1 hour.Touch and hold a clip to pin it. Unpinned clips will be deleted after 1 hour.Touch and hold a clip to pin it. Unpinned clips will be deleted after 1 hour.Touch and hold a clip to pin it. Unpinned clips will be deleted after 1 hour.

Read this statement: Biotechnology uses primary clarifiers for biological nutrient removal.

Which part of the statement is not true?

Biological nutrients are found in wastewater.
Primary clarifiers remove biological nutrients.
Biological nutrients are part of biotechnology processes.
Biological nutrient removal is part of wastewater management.

Answers

Primary clarifiers removing biological nutrients is not true. Primary clarifiers

involves the use of processes such as sedimentation in order to remove

particles floating or other inorganic solids from the waste water.

Biological nutrients such as nitrogen and  phosphorus are found in waste

water and removal of these important nutrients for other uses is a part of

waste water management.

The secondary clarifiers are the ones responsible for the removal of

biological nutrients in the waste water through biofiltration etc.

Read more on https://brainly.com/question/25085634

Other Questions
At a restaurant, 30% of customers donate to charity in exchange for a coupon. Estimate the probability that it will take at least four customers to find one who donates. Ms.yuhas from beloved community charter school is smart and helpful Hey guys please give me the correct answer. In what way is Grendel a modern-day monster rather than a traditional,a historical monster? the questions are in the pdfs i really need help Three cups and four plates cost $18. Five cups cost $10.All the cups cost the same and all the plates cost the same.What is the ratio of the cost of a cup to the cost of a plate? A 7-year, $1,000 par bond has an 8% annual coupon and is currently yielding 7.5%. The bond can be called in 3 years at a call price of $1,010. What is the bond yielding, assuming it will be called (known as the yield to call)? the students in Jake's class , 6 have visited a zoo and 6 have visited a factory 3 students have visited both a zoo and a factory . How many students have visited a zoo but not a factory ? can someone help me please heeellllppppp. A wagon with a mass of 284 kg is accelerated across a level surface at 9 m/s2. What net force acts on the wagon? General admission to the fair is $8.00, and rides cost $3.00 each. express the radical using the imaginary unit i Angry men act 1: Which juror is responsible for the vote not being unanimous on the first round? What were some negative impacts of British rule for India? Community Involvement Claim: Three-fourths of all adults believe that it is important to be involvedin their communities. Based on a USa Today/Gallup poll of 1021 randomly selected adults, 89%believe that it is important to be involved in their communities. find the value of the test statistic. Karls rectangular vegetable garden is 20 feet by 45 feet, and Makennas is 25 feet by 40 feet. Whose garden is larger in area? Please look at the pictures below for the question and multiple choice answers, thank you. A?B?C?D? Number 10 on conexus help please i dont want to fail It's even better if you have a telescope or binoculars. Both allow you to see planets, the moon, and stars even closer. Telescopes are more powerful than binoculars. With a telescope, you can see the moon close enough to see its features. Labeled images can help you find different places on the moon or other objects in the night sky. Even without a telescope, you will still be able to find some of these places.Select the comparative adjectives from the passage.