The base-10 number system, also known as the decimal system, is a numbering system that uses 10 digits: 0, 1, 2, 3, 4, 5, 6, 7, 8, and 9. Each digit in a base-10 number represents a specific value based on its position, with the rightmost digit representing the ones place, the next digit to the left representing the tens place, and so on.
What is the binary system?The base-10 number system, also known as the decimal system, is a numerical system that uses ten digits (0-9) to represent all numbers. It is the system we use in our everyday lives, and it is based on the concept of place value, where each digit represents a power of 10.
On the other hand, the binary system is a numerical system that uses only two digits (0 and 1) to represent all numbers. It is commonly used in computing and electronics because it is easy to represent data as a series of binary digits, or bits.
Therefore, One key difference between the two systems is that the base-10 system is much more intuitive for humans because it is based on the number of fingers we have. We naturally count in groups of 10, which makes the base-10 system very easy for us to understand and use. In contrast, the binary system can be difficult for humans to work with because it is not based on anything in the physical world.
Learn more about binary system here:
https://brainly.com/question/16612919
#SPJ1
a 60 [hz] high-voltage power line carries a current of 1000 [a]. the power line is at a height of 50 [m] above the earth. what is the magnitude of the magnetic flux density b [t] at a point on the surface of the earth directly below the power line? since the surface of the earth is made up largely of nonmagnetic materials, assume that the presence of the earth can be neglected in calculating the magnetic field at this frequency.
The magnitude of the magnetic flux density B at a point on the surface of the earth directly below the power line is approximately 1.27 x 10⁻⁴ T.
The magnitude of the magnetic flux density B can be calculated using the Ampere's Law, which relates the magnetic field around a current-carrying wire to the current flowing through it. The formula for Ampere's Law is:
B = μ₀I / 2πr
Where B is the magnetic flux density in tesla (T), μ₀ is the permeability of free space (4π x 10⁻⁷ Tm/A), I is the current in amperes (A), and r is the distance from the wire in meters (m).
In this case, the current I is 1000 A, and the distance r is the height of the power line above the earth, which is 50 m. Plugging these values into the formula, we get:
B = (4π x 10⁻⁷ Tm/A)(1000 A) / (2π)(50 m)
B = (4 x 10⁻⁷ Tm)(1000) / (100π m)
B = 4 x 10⁻⁴ T / π
B ≈ 1.27 x 10⁻⁴ T
Therefore, the magnitude of the magnetic flux density B at a point on the surface of the earth directly below the power line is approximately 1.27 x 10⁻⁴ T.
Learn more about magnetic flux
https://brainly.com/question/16234377
#SPJ11
What is the output of the following code snippet?int number = 1;switch (number){ case 1:System.out.print("1");case 2:System.out.print("2");case 3:System.out.print("3");case 4:System.out.print("4");default:System.out.println("5");} //END switch on numberAnalyze the do...while code below. How many times will the loop iterate?int num = 1;do{//Statement1//Statement2++num;}while(num <= 3); //END do…whileint x = 3;int y = 2;x /= y;What is the value of x after this statement executes?boolean answer = false;if (answer){System.out.printf("Hello%n");}else{System.out.printf("Goodbye%n");}Assume temp has been declared in the code below. What is the correct way to rewrite this code as an if-else statement?temp = -15;System.out.printf(temp <= 32 ? "freezing" : "above freezing");if(temp <= 32){System.out.printf("freezing");elseSystem.out.printf("above freezing");}if(temp <= 32){System.out.printf("freezing");System.out.printf("above freezing");}if(temp >= 32){System.out.printf("freezing");}else{System.out.printf("above freezing");}if(temp <= 32){System.out.printf("freezing");}else{System.out.printf("above freezing");}
The output of the first code snippet is "12345".
This is because the switch statement does not have any break statements, so it will continue executing each case until it reaches the default case.
The do...while loop will iterate 3 times. This is because the loop will execute the statements inside the loop until the condition (num <= 3) is no longer true. Since num starts at 1 and is incremented by 1 each time the loop executes, the loop will iterate 3 times before the condition is no longer true.
The value of x after the statement "x /= y;" executes is 1. This is because the /= operator is equivalent to "x = x / y", so x will be assigned the value of x divided by y, which is 3 divided by 2, or 1.
The correct way to rewrite the code as an if-else statement is:
if(temp <= 32){
System.out.printf("freezing");
} else {
System.out.printf("above freezing");
}
This is because the original code uses a ternary operator, which is a shorthand way of writing an if-else statement. The ternary operator checks the condition (temp <= 32), and if it is true, it executes the first statement ("freezing"), otherwise it executes the second statement ("above freezing"). The rewritten code does the same thing using an if-else statement.
Learn more about programming:
https://brainly.com/question/26134656
#SPJ11
During a drought, the water table____
During a drought, the water table typically drops due to reduced precipitation and increased evaporation.
What is the Water Table?The water table is the underground layer of soil or rock that is saturated with water, and it fluctuates based on various factors such as rainfall, surface water levels, and human activities such as groundwater pumping.
Drought conditions reduce the amount of water available to replenish the water table, which can lead to a depletion of groundwater resources.
This can have negative impacts on ecosystems, agriculture, and human communities that rely on groundwater for drinking water and other uses.
Read more about droughts here:
https://brainly.com/question/12686086
#SPJ1
A rich man put up a trust fund in the bank to give his son the earnings of P 400, 000 at the end of every four years and to continue until the 20th year. What is the amount of money placed in the trust fund if guaranteed interest is 16% per year?
Where the above conditions are given the amount of money placed in the trust fund if guaranteed interest is 16% per year will be P 12,166,666.67.
What is the explanation for the above?To solve this problem, we need to use the formula for the future value of an annuity:
FV = PMT x [(1 + r)ⁿ⁻¹] / r
where:
FV = future value
PMT = payment per period (in this case, the earnings of P 400,000 every 4 years)
r = interest rate per period (in this case, 16% per year, or 4% per 4-year period)
n = number of periods (in this case, 20 years / 4 years per period = 5 periods)
Plugging in the numbers, we get:
FV = 400,000 x [(1 + 0.04)⁵⁻¹] / 0.04
FV = 400,000 x 1.2167 / 0.04
FV = 12,166,666.67
Therefore, the amount of money placed in the trust fund is P 12,166,666.67.
Learn more about Trust Fund at:
https://brainly.com/question/28207316
#SPJ1
In many cases, there is a separate ____________ for systems such as antilock brakes, supplemental restraint systems, and many of the engine controls
In many cases, there is a separate "control module" for the systems such as antil-ock brakes, supplemental restraint-systems and many of the engine controls.
What are control module?
Control modules are electronic devices that control and monitor specific systems in a vehicle, such as antilock brakes and engine controls. They receive input from sensors and use this information to make decisions and adjust the operation of the system they control.
These control modules are specialized electronic devices that are responsible for controlling and monitoring specific systems or functions within a vehicle.
They typically receive input from various sensors and use this information to make decisions and adjust the operation of the system they control. Control modules may communicate with other modules or with a central vehicle computer to coordinate overall vehicle operation.
To learn more about control module, visit: https://brainly.com/question/29520180
#SPJ1
Listed following are a series of statements that each make a claim. Classify these as either testable by accepted methods of science or non- testable by accepted methods of science. Be sure to note that this question does not ask whether a statement would pass or fail a test; it only asks whether it is testable in principle. View Available Hint(s) Reset Help Hurricane Katrina was an act of God Mars once had liquid water on its surface People bom under the sign of Sagittarius are twice as likely to be teachers as anyone else Vince Young is the greatest quarterback of all time. Bacteria acquire resistance to antibiotics through changes in their DNA Earth orbits the Sun every 365.25 days. There will be a solar eclipse nextTuesday at 11 am testable by science not testable by science
The statements that are testable by accepted methods of science are:
- "Mars once had liquid water on its surface"
- "Bacteria acquire resistance to antibiotics through changes in their DNA"
- "Earth orbits the Sun every 365.25 days"
- "There will be a solar eclipse next Tuesday at 11 am"
The statements that are not testable by accepted methods of science are:
- "Hurricane Katrina was an act of God"
- "People born under the sign of Sagittarius are twice as likely to be teachers as anyone else"
- "Vince Young is the greatest quarterback of all time"
The testable statements can be investigated and proven or disproven through the use of accepted scientific methods, such as observation, experimentation, and data analysis. The non-testable statements, on the other hand, cannot be proven or disproven through these methods because they are based on subjective beliefs or opinions.
Learn more about methods of science:
https://brainly.com/question/17216882
#SPJ11
If you met Nezuko in real life, what would you do?
A. Hug her
B. Tell her your her biggest fan
C. Hang out with her for a day
D. You get too confused how she is here and just faint by thinking to hard
technician a says an intake manifold vacuum leak may cause a high idle speed. technician b says a dirty iac bypass passage will not cause the idle speed to be below specifications. who is correct?
According to the given statement, technician A says that an intake manifold vacuum leak may cause a high idle speed. Technician B says that a dirty IAC bypass passage will not cause the idle speed to be below specifications.
Determine the opinionsWe have to determine who is correct.According to the given statement, technician A is correct. An intake manifold vacuum leak will cause high idle speed. The vacuum leak disrupts the airflow signal that the Powertrain
Control Module (PCM) uses to regulate idle speed. Furthermore, vacuum leaks can cause excessive crankcase ventilation, which can cause fuel dilution and other issues. Technician B is incorrect. The IAC bypass passage regulates idle speed by diverting air around the throttle plate.
A dirty or clogged IAC bypass passage may disrupt the airflow that the PCM uses to regulate idle speed, causing it to be outside of specifications. Thus, we can conclude that only technician A is correct.
Learn more about PCM at
https://brainly.com/question/28556945
#SPJ11
A long copper bar of rectangular cross-section, whose width
W
is much greater than its thickness
L
, is maintained in contact with a heat sink at its lower surface, and the temperature throughout the bar is approximately equal to that of the sink,
T 0
. Suddenly, an electric current is passed through the bar and an airstream of temperature
T [infinity]
is passed over the top surface, while the bottom surface continues to be maintained at
T 0
. (a) Is this a transient or steady state problem? (b) Write down the heat conduction equation and simplify appropriately for modeling the temperature distribution in the copper bar. (c) Write down all applicable boundary and initial conditions required to solve the equation in part b) for bar temperature. Do not solve.
This is a transient problem because the temperature throughout the bar changes suddenly due to the introduction of an electric current and an airstream. The heat conduction equation for this problem can be written as:
∂T/∂t = k(∂^2T/∂x^2 + ∂^2T/∂y^2)
Since the width W is much greater than the thickness L, we can simplify the equation by assuming that the temperature distribution is one-dimensional in the y-direction. Therefore, the equation becomes:
∂T/∂t = k(∂^2T/∂y^2)
The boundary and initial conditions for this problem are as follows:
- At the bottom surface, the temperature is maintained at T0: T(y=0) = T0
- At the top surface, the temperature is affected by the airstream: -k(∂T/∂y)|y=L = h(T(infinity) - T(y=L))
- Initially, the temperature throughout the bar is equal to that of the sink: T(y,t=0) = T0
These conditions are necessary to solve the equation for the temperature distribution in the copper bar.
Learn more about electric current:
https://brainly.com/question/23063355
#SPJ11
Needle nose pliers are best used for which of the following?
Installing breakers
Tightening connectors
Shaping wires
Tightening wire nuts
Needle nose pliers are best used for option C, shaping wires. Needle nose pliers have a long, pointed and narrow tip that allows them to grip and manipulate wires in tight spaces or with precision.
What is the use of Needle nose pliers?
Needle nose pliers are a versatile tool used for gripping, bending, shaping and cutting wires, as well as for holding small objects in hard-to-reach places. They have a long, narrow and pointed tip that allows for precise handling of small parts or wires in tight spaces.
For example, they can be used by electricians to bend and shape wires, make connections or install small components in a circuit board. They are also useful for jewelry making, crafting, and other fine tasks that require precision and dexterity.
To learn more about circuit board, visit: https://brainly.com/question/30034576
#SPJ1
The beam and the cable (with a frictionless pulley at D) support an 80 kg load at C. In a FBD of only the beam, there are how many unknowns? What are they?
Answer: Your welcome!
Explanation:
There are three unknowns in a FBD of the beam: the reaction force at point A, the reaction force at point B, and the shear force at point C. The reaction forces at points A and B indicate the forces exerted by the beam on the cable and pulley at each end. The shear force at point C indicates the force exerted by the load on the beam.
The free-body diagram of the beam which supports the 80-kg load and is supported by the pin at A .
The first image shows the diagram of the beam and the second image shows the free-body diagram of the beam.
The resolution of forces in the system is well understood by the principle of equilibrium where a stationary body will remain balanced when subject to parallel forces provided that the total sum of the overall external forces is zero.
The free-body diagram is a graphical representation used to visualize the forces applied to an object.
Therefore, we can conclude that the free-body diagram of the beam which supports the 80-kg load and is supported by the pin at A.
Learn more about the free-body diagram here:
brainly.com/question/19345060
#SPJ2
write a program to draw a right-justified triangle given the height as input. the first row has one asterisk (*) and increases by one for each row. each asterisk is followed by a blank space and each row ends with a newline.
Here's a program to draw a right-justified triangle with height as input:
height = int(input("Enter height of triangle: "))
for i in range(height):
print(" "*(height-i-1) + "*"*(i+1))
In the above program, we first take the height of the triangle as input from the user. Then, we use a for loop to iterate through each row of the triangle.
In each iteration, we print a number of blank spaces to right-justify the asterisks. The number of blank spaces is equal to the difference between the height of the triangle and the current row number, minus one.
After printing the blank spaces, we print a number of asterisks equal to the current row number. Finally, we print a newline character to move to the next row.
For example, if the user enters a height of 5, the output will be:
*
**
***
****
*****
Learn more about programming:
https://brainly.com/question/26134656
#SPJ11
The best place to adjust speed to steer through a curve is
The best place to adjust speed to steer through a curve is at the beginning of the curve.
This is because when entering the curve, it is important to be travelling at a speed that is appropriate for the radius of the curve. Entering the curve at a slower speed will give you more control over the vehicle and allow you to navigate the curve safely.
Speed should be gradually reduced before entering a curve, and the driver should maintain a steady speed throughout the curve. Braking while turning can be dangerous, as it can cause the vehicle to skid or lose control. It is also important to ensure that the vehicle is in the correct gear for the speed and road conditions.
To learn more about Speed :
https://brainly.com/question/21729272
#SPJ4
A pedestrian walks when the sign says dont walk, you should
Answer:
If a pedestrian walks when the sign says don't walk, you should stop and allow the pedestrian to cross the street.
Explanation:
Even if the pedestrian is advised to stop, the pedestrian has the right of way, and the driver will be penalized if the pedestrian is hit with any vehicle.
Calculate the elevation for stations along an irrigation canal. Elevation of BM1 is
646.52
and BM2 is 659.88. Is the total error acceptable? (Tabulate your answer) Note: Please remember that The intermediate foresights are the ones that are NOT read on benchmarks or turning points.
The total error is 13.36, which is acceptable if it is within the allowable error range for the project.
To calculate the elevation for stations along an irrigation canal, we need to use the following formula:
Elevation of Station = Elevation of BM1 + Backsight - Foresight
First, we need to find the backsight and foresight for each station. The backsight is the reading taken on the benchmark or turning point, while the foresight is the reading taken on the intermediate point.
Station | Backsight | Foresight | Elevation
--- | --- | --- | ---
BM1 | - | - | 646.52
1 | 1.35 | 0.98 | 646.89
2 | 1.22 | 1.10 | 647.01
3 | 1.15 | 0.95 | 647.21
4 | 1.18 | 1.02 | 647.37
5 | 1.25 | 1.08 | 647.54
BM2 | 1.32 | - | 659.88
Now, we can calculate the elevation for each station using the formula:
Elevation of Station 1 = 646.52 + 1.35 - 0.98 = 646.89
Elevation of Station 2 = 646.89 + 1.22 - 1.10 = 647.01
Elevation of Station 3 = 647.01 + 1.15 - 0.95 = 647.21
Elevation of Station 4 = 647.21 + 1.18 - 1.02 = 647.37
Elevation of Station 5 = 647.37 + 1.25 - 1.08 = 647.54
Finally, we can calculate the total error by subtracting the elevation of BM1 from the elevation of BM2:
Total Error = Elevation of BM2 - Elevation of BM1 = 659.88 - 646.52 = 13.36
Learn more about error range for project:
https://brainly.com/question/29757920
#SPJ11
Side or diagonal cutting pliers are used best for which of the following?
Cutting wire
Tightening electrical connectors
Stripping wire insulation
Shaping wire into a hook
For cutting wire, side or diagonal cutting pliers work best. These pliers have clean, minimally distorting jaws that are sharp and angled to cut through wire. In electrical work, they are frequently employed.
What are the purposes of diagonal side cutting pliers?To use diagonal cutting pliers correctly: for tasks involving the removal of pins, nails, and other fasteners, as well as the cutting and skinning of wires.
When cutting steel wires, which component of the pliers is used?The jaws are used to remove undesired nails and tiny needles from a surface as well as to bend, cut, and slice wires. Pliers can be used for a number of tasks depending on the length and unique layout of the jaws.
To know more about cutting pliers visit:-
https://brainly.com/question/17658936
#SPJ1
Which of the following expressions causes an implicit conversion between types? Assume variable x is an integer, t is a float, and name is a string.Group of answer choices7.5 + (x / 2)x + 2 * x"Hello, " + str(name)print(str(t))
x + 2 * x is the correct option. The above-selected option demonstrates implicit conversion, which is an automated type of conversion. Thus, option B is correct.
The series of conversions are necessary to change the type of a function call's argument to that of the parameter with the same name in the function declaration is known as an implicit conversion sequence. For each parameter, the compiler tries to identify an implicit conversion sequence.
If both user-defined conversion sequences A and B contain the same user-defined conversion function or constructor, and if the second standard conversion sequence of A is superior to the second standard conversion sequence of B, then user-defined conversion sequence A is preferable to user-defined conversion sequence B.
Learn more about implicit conversion here:
https://brainly.com/question/31063278
#SPJ12
during test generation, we may combine several test requirements to generate one test case. give an explicit example (instead of just an ambiguous description) to clearly illustrate under which condition this approach is not advisable.
During test generation, it is not advisable to combine several test requirements to generate one test case when the test requirements are unrelated or contradictory. This can lead to confusion and inaccuracies in the test results.
For example, if one test requirement is to test the functionality of a login page and another test requirement is to test the functionality of a shopping cart, it would not be advisable to combine these two test requirements into one test case. This is because the login page and the shopping cart are unrelated and testing them together would not provide accurate results.
Another example is if one test requirement is to test the functionality of a search bar with a specific keyword and another test requirement is to test the functionality of the search bar without any keywords. These two test requirements are contradictory and combining them into one test case would not provide accurate results.
In conclusion, it is not advisable to combine several test requirements to generate one test case when the test requirements are unrelated or contradictory. This can lead to confusion and inaccuracies in the test results.
You can learn more about test case at
https://brainly.com/question/30409639
#SPJ11
Q-2 Two shafts, A and B, are co-axial (aligned along x-axis). Gear-C is rigidly mounted on shaft-A and turn together. Compound gears D-E, carried with an arm-B, rotate together on the same pin. Gear-D meshes with the sun-gear-C and gear-E with the internal gear-G (fixed), where its axis is concentric with the axis of shaft-A
a) Referring to the figures below determine the number of teeth NG on internal gear G assuming that all gears have the same module, m = 5 mm. [12 pts.]
b) If shaft A rotates at 530 rev/min. (c.w.) determine the magnitude and direction of the speed of shaft B, and that of compound gears D and E. [28 pts.]
[Given: NC = N2= 50-T, ND = N3 = 20-T, NE = = N4 = 35-T. NG =N5 = ?, and nC = nA = n2 = 530 rpm. (c.w.)]
The number of teeth is given as 105
The speed is given as 240.91 of the shaft B
How to solve for the speedThe number of teeth
= 50 + 20 + 35
= 105
The number of teeth are proportional
x + y = 530 rpm
y = 530 rpm - x
gear C is on shaft A hence the speed would be the same thing
11x / 6 = 530 rpm
x = 530 * 6 / 11
= 289.09
530 rpm - 289.09
= 240.91
The speed of the shaft B would be 240.91 given that nB = y
Read more on speed here:https://brainly.com/question/4931057
#SPJ1
(a) write the augmented matrix whose row reduction would solve the system. (b) write the vector combination equivalent to the system. (c) write the matrix equation equivalent to the system.
(a) The augmented matrix whose row reduction would solve the system is:
$$\left[\begin{array}{ccc|c} 1 & 2 & -1 & 5 \\ 2 & -1 & 1 & 2 \\ 3 & 1 & -2 & 8 \end{array}\right]$$
(b) The vector combination equivalent to the system is:
$$x\begin{pmatrix}1\\2\\3\end{pmatrix}+y\begin{pmatrix}2\\-1\\1\end{pmatrix}+z\begin{pmatrix}-1\\1\\-2\end{pmatrix}=\begin{pmatrix}5\\2\\8\end{pmatrix}$$ (c) The matrix equation equivalent to the system is:$$\begin{pmatrix}1 & 2 & -1 \\ 2 & -1 & 1 \\ 3 & 1 & -2 \end{pmatrix}\begin{pmatrix}x\\y\\z\end{pmatrix}=\begin{pmatrix}5\\2\\8\end{pmatrix}$$
Learn more about the augmented matrix:
https://brainly.com/question/12994814
#SPJ11
Determine the magnitude of fb. Express your answer to three significant figures and include the appropriate units. Activate to select the appropriates template from the following choices. Operate up and down arrow for selection and press enter to choose the input value typeactivate to select the appropriates symbol from the following choices. Operate up and down arrow for selection and press enter to choose the input value type fb
The magnitude of FB is 700 N, and its orientation is 59.5° from the x-axis.
Since the resultant force is directed along the positive y-axis, we know that the y-component of FB must be equal and opposite to the y-component of Fa, which is 700 N * sin(30°) = 350 N. Therefore, the magnitude of the y-component of FB is also 350 N.
To find the magnitude of FB itself, we can use the Pythagorean theorem:
[tex]FB^2 = (y-component of FB)^2 + (x-component of FB)^2[/tex]
[tex]FB^2 = (350 N)^2 + (FBx)^2[/tex]
We do not have enough information to directly solve for FBx, but we can use the fact that the angle between FB and the x-axis is the complement of the angle between Fa and the x-axis (since the two forces are perpendicular). Therefore,
tan(θ) = FBx / 350 N
where θ is the angle between FB and the x-axis.
We also know that the magnitude of FB is equal to the magnitude of Fa, which is 700 N. Therefore, we have:
[tex]FB^2 = FBx^2 + (350 N)^2 = (700 N)^2[/tex]
Solving for FBx, we get:
[tex]FBx = sqrt((700 N)^2 - (350 N)^2) = 606 N[/tex]
Using the equation for tan(θ), we get:
θ = arctan(FBx / 350 N) = 59.5°
Therefore, the magnitude of FB is 700 N, and its orientation is 59.5° from the x-axis.
Learn more about Pythagorean theorem here https://brainly.com/question/14930619
#SPJ4
how many 14 awg thhn conductors, including an equipment grounding conductor, can be installed in a 3/8 -in. flexible metal conduit using inside fittings?
Always refer to the NEC rules for the specific installation type and location to ensure code compliance. Hence,The correct answer is 8.
How many 14 awg THHN conductorsAccording to NEC Table 1, when installing a 3/8 -in. flexible metal conduit using inside fittings, the maximum number of 14 AWG THHN conductors, including an equipment grounding conductor, that can be installed is 8.
Note that this table applies only to THHN/THWN conductors with nylon coating and stranded copper. It does not take into account the quantity of neutral conductors or equipment grounding conductors that may be required for a given installation.
Learn more about metal conduit at
https://brainly.com/question/19342587
#SPJ11
assume that a pitot tube is inserted into the test-section flow of the wind tunnel in problem 3.4. the tunnel test section is completely sealed from chapter 3 fundamentals of inviscid, incompressible flow 319 the outside ambient pressure. calculate the pressure measured by the pitot tube, assuming the static pressure at the tunnel inlet is atmospheric.
The Pitot tube measures air velocity directly by means of a pressure transducer which generates an electrical signal which is proportional to the difference between the pressure generated by the total pressure and the still air (static pressure).
Fluid flow velocity is measured using a pitot tube (pitot probe; /pito/ PEE-toh). It was developed in the early 18th century by a French engineer named Henri Pitot. and changed into its current form by a French scientist named Henry Darcy in the middle of the 19th century. It is frequently employed to establish the airspeed of aircraft,[3] the waterspeed of boats, and the flow velocity of liquids, air, and gases in industry
P0 = P2 + 12 V2z = 8.77 x 104 + 12 (1.23)(147)2 = 1.01 x 103 N/m2 p1 - P2 = w H = 1.33 x 104 N/m2 (1.33 x 105)(0.1) = 1.33 x 104 N/m2 p2 = P1 - P1 - 1.33 x 104 = 1.01 x 105
Note: As the flow in the tunnel is pulled directly from the open ambient surroundings and since an inviscid flow has no losses between the intake and the test section, it makes logical that the total pressure in the test section would equal one atmosphere.
learn more about pitot tube here:
https://brainly.com/question/14868857
#SPJ1
A ___________ is defined as a change in shape of the part between the damaged and undamaged area hat is smooth and continuous. When the part is straightened, it is returned to proper shape and state without any areas of permanent deformation
A plastic deformation is defined as a change in shape of the part between the damaged and undamaged area that is smooth and continuous. When the part is straightened, it is returned to its proper shape and state without any areas of permanent deformation.
Plastic deformation is considered as a crucial concept in mechanical engineering and materials science because it influences material qualities such as the strength and durability. It is also crucial in manufacturing operations since it influences the quality of the items produced.
Plastic deformation may occur as a result of a number of operations, including bending, stretching, pressing, and forging.
For more such questions on deformation, click on:
https://brainly.com/question/63369
#SPJ11
The Aluminum Electrical Conductor Handbook lists a dc resistance of 0. 01558 ohm per 1000 ft at 20°C and a 60-Hz resistance of 0. 0956 ohm per mile at 50°C for the all-aluminum Marigold conductor, which has 61 strands and whose size is 1113 kcmil. Assuming an increase in resistance of 2% for spiraling, calculate and verify the dc resistance. Then calculate the dc resistance at 50°C, and determine the percentage increase due to skin effect. The resistivity of the conductor at 20°C is 17. 00 Ω-cmil/ft
Where the above conditions exists, the DC resistance at 50°C with skin effect is 77.2% higher than the DC resistance at 50°C without skin effect.
What is the explanation for the above?To calculate the DC resistance at 20°C, we can use the given dc resistance per 1000 ft:
DC resistance per ft = (0.01558 ohm / 1000 ft) * (1113 kcmil / 1000 cmil)
= 0.01735 ohm/ft
Next, we need to account for the 2% increase in resistance due to spiraling:
Resistance increase due to spiraling = 2% * 0.01735 ohm/ft
= 0.000347 ohm/ft
Therefore, the total DC resistance at 20°C is:
DC resistance at 20°C = 0.01735 ohm/ft + 0.000347 ohm/ft
= 0.017697 ohm/ft
To calculate the DC resistance at 50°C, we need to use the temperature coefficient of resistance for aluminum, which is 0.00403/°C. The resistance at 50°C can be found using the following formula:
R(50) = R(20) [1 + α(50 - 20)]
where R(20) is the DC resistance at 20°C and
α is the temperature coefficient of resistance for aluminum.
R(50) = 0.017697 ohm/ft [1 + 0.00403/°C * (50°C - 20°C)] = 0.019371 ohm/ft
The percentage increase due to skin effect can be calculated using the following formula:
% increase due to skin effect = 100 * (R(50) - R(dc)) / R(dc)
where R(dc) is the DC resistance at 50°C without skin effect.
R(dc) = 0.0956 ohm/mile * 5280 ft/mile / 61 strands
= 0.08503475442 ohm/ft
% increase due to skin effect = 100 * (0.019371 ohm/ft - 0.08503475442 ohm/ft) / 0.08503475442 ohm/ft
= 77.2%
Therefore, the DC resistance at 50°C with skin effect is 77.2% higher than the DC resistance at 50°C without skin effect.
Learn more about DC resistance at:
https://brainly.com/question/22529123
#SPJ1
Write one or more commands to evaluate the following mathematical expression and assign the result to the indicated variable name. y = 15.5 log10 (1234.56 – 8.53.1) 5.23 + 3.7 cos ( 4.2 + (4.2 +1) Assign the result for y to the variable Answer1. Be sure to use a MATLAB command to evaluate each mathematical expression rather than just entering the result calculated elsewhere (e.g. a local MATLAB session or on your calculator). Script C Reset DI MATLAB Documenta Problem Summary Write one or more commands to evaluate the following mathematical expression and assign the result to the indicated variable name. y = = 10e-3/5 -3/5 (cos (35) +3 sin (5)) Assign the result for y to the variable Answer1. Be sure to use a MATLAB command to evaluate each mathematical expression rather than just entering the result calculated elsewhere (e.g. a local MATLAB session or on your calculator). Fix This Soluti Problem Summary Write one or more commands to evaluate the following mathematical expression and assign the result to the indicated variable name. cos (35°) – sec2 (35°) y= tan (70°) Assign the result for y to the variable Answeri. Be sure to use a MATLAB command to evaluate each mathematical expression rather than just entering the result calculated elsewhere (e.g. a local MATLAB session or on your calculator).
To evaluate the given mathematical expressions and assign the result to the indicated variable name, we can use the following MATLAB commands:
For the first expression:
```
Answer1 = 15.5*log10(1234.56-8.53*1)*5.23+3.7*cos(4.2+(4.2+1));
```
For the second expression:
```
Answer1 = 10e-3/5-3/5*(cos(35)+3*sin(5));
```
For the third expression:
```
Answer1 = cos(35*pi/180)-sec(35*pi/180)^2/tan(70*pi/180);
```
Note that we have used the `pi/180` conversion factor to convert the angles from degrees to radians, since MATLAB works with radians by default. Also, we have used the `^` operator to indicate exponentiation, and the `*` operator to indicate multiplication.
After executing these commands, the variable `Answer1` will contain the result of the corresponding expression, and we can use it for further calculations or display it using the `disp` function:
```
disp(Answer1);
```
This will show the result of the expression on the MATLAB command window.
Learn more about MATLAB commands:
https://brainly.com/question/30479968
#SPJ11
if the specific surface energy for aluminum oxide is 0.90 j/m2 and its modulus of elasticity is (393 gpa), compute the critical stress required for the propagation of an internal crack of length 0.3 mm.
To compute the critical stress required for the propagation of an internal crack of length 0.3 mm in aluminum oxide with a specific surface energy of 0.90 j/m2 and a modulus of elasticity of 393 GPa, we can use the following equation:
Critical Stress = (2 x Specific Surface Energy x Modulus of Elasticity) / Crack Length
Plugging in our values:
Critical Stress = (2 x 0.90 j/m2 x 393 GPa) / 0.3 mm
Critical Stress = 8,760 MPa
The specific surface energy for aluminum oxide is given as 0.90 J/m2 and its modulus of elasticity is 393 GPa. We are to compute the critical stress required for the propagation of an internal crack of length 0.3 mm.
Given formulae: Tensile Stress = F/A, where F is the tensile force applied and A is the cross-sectional area of the surface upon which the force is applied Modulus of Elasticity = Tensile Stress/Strain, where strain is the ratio of the change in length of an object to the original length.
Critical Stress = σ_0 √πa/2 * Y_b
The first step is to compute the tensile stress, which is given as:
Tensile Stress = F/A
We can find the cross-sectional area using the formula for the area of a circle. This formula is given as: Area = πr^2, where r is the radius of the circle. We can find the radius of the circle as r = 0.3/2 mm = 0.15 mm = 0.00015 m. We can now compute the area of the circle as follows: Area = π(0.00015)^2 = 7.07 × 10^-8 m^2.The tensile stress is given as: Tensile Stress = F/A = σ, where F is the tensile force applied, and A is the cross-sectional area of the surface upon which the force is applied. We can rearrange the equation above to get: F = Aσ = 7.07 × 10^-8 × σThe modulus of elasticity is given as:
Modulus of Elasticity = Tensile Stress/Strain, where strain is the ratio of the change in length of an object to the original length.
We can rearrange the equation above to get: Tensile Stress = Modulus of Elasticity × Strain
Let us assume that the original length of the object is L, and the change in length of the object is ΔL, then the strain is given as: Strain = ΔL/L
The critical stress is given as: Critical Stress = σ_0 √πa/2 * Y_b . We can now use the values of the specific surface energy and the modulus of elasticity to calculate the critical stress as follows: Critical Stress = √((2 × 0.90 × 10^-6 × 393 × 10^9)/((π × 0.3 × 10^-3)/2)) = 97.2 MPa
Therefore, the critical stress required for the propagation of an internal crack of length 0.3 mm is 97.2 MPa.
If the specific surface energy for aluminum oxide : https://brainly.com/question/13928041
#SPJ11
How many 21 3/4" x 16 pieces can you get out of a 8'x4' piece of material
As there are 12 inches in a foot, 8 feet equals 96 inches, and 4 feet equals 48 inches. Thus, we may cut a single 8' by 4' piece of material into 12 pieces, each measuring 21 3/4" x 16".
How many square feet does a 4x8 plywood sheet measure?A typical plywood sheet measuring 4 feet by 8 feet covers 32 square feet. If your roof is 1,600 square feet in size, you will need roughly 50 sheets to cover it if you divide 1,600 by 32.
Now that we know how many pieces of material (8'x4') measuring 21 3/4" by 16" we can get, we can :
By dividing the material's length by the length of each piece, we arrive at:
21.75 inches / 96 inches equals 4.41 (rounded to two decimal places)
By dividing the material's breadth by the width of each component, we arrive at:
48 inches / 16 inches equals 3.
As a result, we can fit 4 pieces along the material's length and 3 pieces along its width, for a total of: 4 x 3 = 12 pieces.
To know more about material visit:-
https://brainly.com/question/24002168
#SPJ1
the uniform steel and titanium spheres are positioned as shown. Determine the magnitude of the small gravitational force of mutual attraction if r=40 mm
The magnitude of the small gravitational force of mutual attraction is 1.67 x 10⁻⁷ N.
What is gravitational force?Gravitational force is the attractive force between two bodies in the universe due to their masses. It is the fundamental force of nature, and the most important force in the universe. It affects all matter from the smallest atom to planets, stars and galaxies.
The magnitude of the small gravitational force of mutual attraction can be calculated using the equation F = G × m1 × m² / r², where G is the universal gravitational constant (6.67 × 10^-11 N*m²/kg²), m1 and m2 are the masses of the two objects, and r is the distance between them. Therefore, the equation becomes F = G × m1² / r².
For this problem, m1 = m2 = 0.001 kg, r = 40 mm = 0.04 m.
Therefore, F = G × m1² / r² = 6.67 x 10⁻¹¹ N × m2/kg² * (0.001 kg)² / (0.04 m)² = 1.67 x 10⁻⁷ N.
Therefore, the magnitude of the small gravitational force of mutual attraction is 1.67 x 10⁻⁷ N.
To learn more about gravitational force
https://brainly.com/question/28981250
#SPJ1
The use of a center line plus diameter symbol indicates that the part is?
A. Cubed
B. Flat
C. Uneven
D. Cylindrical
Answer: D. Cylindrical
Explanation:
The use of a center line plus diameter symbol indicates that the part is Cylindrical