Click the icon to view the table. a. Find the probability of getting exactly 1 girl in 8 births. _________ (Type an integer or a decimal. Do not round.) b. Find the probability of getting 1 or fewer girls in 8 births. _________ (Type an integer or a decimal. Do not round.) c. Which probability is relevant for determining whether 1 is a significantly low number of girls in 8 births: the result from part (a) or part (b)? A. Since getting 0 girls is an even lower number of girls than getting 1 girl, the result from part (b) is the relevant probability. B. Since the probability of getting more than 1 girl is the complement of the result from part (b), this is the relevant probability. C. Since the probability of getting 1 girl is the result from part (a), this is the relevant probability. D. Since the probability of getting 0 girls is less likely than getting 1 girl, the result from part (a) is the relevant probability. d. Is 1 a significantly low number of girls in 8 births? Why or why not? Use 0.05 as the threshold for a significant event. A. Yes, since the appropriate probability is greater than 0.05, it is a significantly low number. B. No, since the appropriate probability is greater than 0.05, it is not a significantly low number. C. No, since the appropriate probability is less than 0.05, it is not a significantly low number. D. Yes, since the appropriate probability is less than 0.05, it is a significantly low number.

Answers

Answer 1

a. The probability of getting exactly 1 girl in 8 births is given as follows: 0.0313 = 3.13%.

b. The probability of getting 1 or fewer girls in 8 births is given as follows: 0.0352 = 3.52%.

c. The relevant probability for significantly low is given as follows: B. Since the probability of getting more than 1 girl is the complement of the result from part (b), this is the relevant probability.

d. The correct option regarding whether the probability is significantly low is: D. Yes, since the appropriate probability is less than 0.05, it is a significantly low number.

What is the binomial distribution formula?

The binomial distribution is a probability distribution that describes the number of successes in a fixed number of independent trials, where each trial has only two possible outcomes: success or failure.

The mass probability formula is given as follows:

[tex]P(X = x) = C_{n,x}.p^{x}.(1-p)^{n-x}[/tex]

[tex]C_{n,x} = \frac{n!}{x!(n-x)!}[/tex]

The parameters are listed as follows:

n is the number of trials of the experiment.p is the probability of a success on a single independent trial of the experiment.

The relevant probabilities for this problem are given as follows:

P(X = 0) = 0.5^8 = 0.0039.P(X = 1) = 8 x 0.5^8 = 0.0313.

Hence the probability of 1 or fewer, used to verify if the event is significantly low, is:

P(X <= 1) = P(X = 0) + P(X = 1)

P(X <= 1) = 0.0352.

More can be learned about the binomial distribution at https://brainly.com/question/24756209

#SPJ1


Related Questions

What is the answer for this questions?

Answers

Answer:

A. Corresponding angles

B. Vertically opposite angles

C. Alternate angles

Step-by-step explanation:

Alternate angles are two angles, not adjoining one another, that are formed on opposite sides of a line that intersects two other lines. If the original two lines are parallel, the alternate angles are equal.

Vertically Opposite Angles are the angles opposite each other when two lines cross "Vertical" in this case means they share the same Vertex (corner point), not the usual meaning of up-down. Example: a° and b° are vertically opposite angles.

Corresponding angles are the angles which occupy the same relative position at each intersection where a straight-line crosses two others. If the two lines are parallel, the corresponding angles are equal.

John has pens that come in packages of 15 and crayons that come in packages of 20. What is least number of packages of pens and pack; crayons he will need in order to have the same total number of pens and crayons?

Answers

Answer:

15 packs of crayons and 20 packs of pens

Step-by-step explanation:

you have to the multiply the amount that comes in each pack together


There are 8 circles and 4 squares. What is the simplest ratio of squares to total
shapes?

Answers

Answer: 4:12

Step-by-step explanation: Since it is squares to total you have to put the amount of squares first. That would be 4. Then, you have to figure out the total which is just adding 4+8=12. That would be the total. Therefore, the answer would be 4 to 12.

What share of the 2 leftover flats of plants should I plant in each garden?
Write the remainder as a fraction.
22 + 5 = 4 R2

Answers

The answer, however, will be less than one because the numerator is less than the denominator. Thus, 1 divided by 2 is equal to 0.5. The right response is hence "0.5."

What is unitary method?

"A method to find a single unit value from a multiple unit value and to find a multiple unit value from a single unit value."

We always count the unit or amount value first and then calculate the more or less amount value.

For this reason, this procedure is called a unified procedure.

Many set values ​​are found by multiplying the set value by the number of sets.

A set value is obtained by dividing many set values ​​by the number of sets.

Hence, The answer, however, will be less than one because the numerator is less than the denominator. Thus, 1 divided by 2 is equal to 0.5. The right response is hence "0.5."

learn more about unitary method click here:

brainly.com/question/24587372

#SPJ1

What point on the coordinate plane is halfway between (–0. 75, –1. 25) and (–0. 75, –0. 25)?

Answers

The point halfway between (–0.75, –1.25) and (–0.75, –0.25) is (–0.75, –0.75).To find the point halfway between (–0.75, –1.25) and (–0.75, –0.25), we will use the midpoint formula.

To find the point halfway between (–0.75, –1.25) and (–0.75, –0.25), we will use the midpoint formula. The midpoint formula is (x1 + x2) / 2, (y1 + y2) / 2. In this case, x1 and x2 are both –0.75, and y1 is –1.25 and y2 is –0.25. Plugging in the values and doing the math, we get (–0.75 + –0.75) / 2 = –0.75, and (–1.25 + –0.25) / 2 = –0.75. Therefore, the point halfway between (–0.75, –1.25) and (–0.75, –0.25) is (–0.75, –0.75).

Learn more about midpoint here

https://brainly.com/question/28224145

#SPJ4

Select all expressions that are equivalent to 81x^2 +180x -200 =100

Answers

The expressions that are equivalent to 81x² + 180x - 200 = 100 are:  27x² - 60x + 100 = 0, x² + (20/9)x - (100/27) = 0, (x + 1/3)(x + 10/3) = 0, (3x + 1)(3x + 10) = 0.

To find the expressions that are equivalent to 81x² + 180x - 200 = 100, we can simplify and manipulate the equation using basic algebraic operations.

Starting with the given equation:

81x² + 180x - 200 = 100

We can subtract 100 from both sides to get:

81x² + 180x - 300 = 0

Now, we can simplify the left side by dividing each term by their greatest common factor, which is 3:

27x² + 60x - 100 = 0

Next, we can divide each term by 27 to make the coefficient of x² equal to 1:

x² + (60/27)x - (100/27) = 0

Simplifying the fractions, we get:

x² + (20/9)x - (100/27) = 0

Now, we can use the quadratic formula to find the solutions of this equation:

x = (-b ± √(b² - 4ac))/2a

where a = 1, b = 20/9, and c = -100/27.

Plugging in these values, we get:

x = (-20/9 ± √((20/9)² + 4(1)(100/27)))/2(1)

x = (-20/9 ± √(400/81 + 400/27))/2

x = (-20/9 ± √(1600/81))/2

x = (-20/9 ± 40/9)/2

x = (-20 ± 40)/18

x = -1/3, -10/3

Learn more about factor here: brainly.com/question/219464

#SPJ4

Use the Remainder Theorem to determine whether x = 2 is a root
of ????(x) =3x^3−4x^2−8.

Answers

x = 2 is not a root of the given function.

We are required to use the Remainder Theorem to determine whether x = 2 is a root of the given function:????(x) = 3x³ − 4x² − 8.Remainder Theorem The Remainder Theorem states that when a polynomial function f(x) is divided by (x - a), the remainder equals f(a).In order to find whether x = 2 is a root of the function or not, we have to apply the Remainder Theorem. We can perform the division in the following manner: Solution The given polynomial function is: ????(x) = 3x³ − 4x² − 8.So, we can perform the division as shown below: On dividing f(x) by (x - a), the remainder is f(a). Hence, the remainder when the given function is divided by (x - 2) is -14.Therefore, x = 2 is not a root of the given function.

Learn more about Remainder Theorem

brainly.com/question/13264870

#SPJ11

In 2009, a fire destroyed 17/20 of the farmer's crops. Rewrite the fraction in the sentence below as a percentage.

Answers

Answer:

In 2009, a fire destroyed 85% of the

farmer's crops.

To convert a fraction to a

percentage, you can multiply the

fraction by 100.

17/20 0.85

So, 17/20 is equivalent to 0.85 or

85%.

Answer:

In 2009 a fire destroyed 85% of the farmers crops

Step-by-step explanation:

What is the probability of someone pulling 1-10 in consecutive order from a bad that contains 10 balls labeled 1-10? Explain your reasoning.

Answers

The correct answer is [tex](\frac{1}{10!} )[/tex] i.e. 0.00002756% , for this we have to learn probability.

What is Probability?

Probability of an event which define as the possibility of any event to occur when we perform any event.

Probability is a method to determine how likely something is to happen. Many things are difficult to forecast with absolute confidence. Using it, we can only make assumption about the likelihood or chance of an event happening, or how likely it is.

An event in probability theory is the result of a random experiment or a specified group of its results.

To achieve 10 balls in order we first choose a random ball, then the probability of that ball is i.e. P(1) =  [tex]\frac{1}{10}[/tex] .

Then choose Second ball whose probability is i.e. P(2) =  [tex]\frac{1}{9}[/tex] .

And then [tex]\frac{1}{8}, \frac{1}{7} ,\frac{1}{6} ,\frac{1}{5} .......... finally,\ \frac{1}{1}.[/tex]

[tex]P(1.......10\ in\ order)=\frac{1}{10!}[/tex]

To learn more about Probability, visit :

https://brainly.com/question/13604758

#SPJ1

y=x^2+7x+4 quadratic function in vertex form

Answers

The given quadratic function, y=x^2+7x+4, in vertex form is y = (x + 7/2)^2 - 33/4

Writing Quadratic functions in Vertex form

From the question, we are  to write the given quadratic function in vertex form

To write the quadratic function y = x^2 + 7x + 4 in vertex form, we can complete the square. The vertex form of a quadratic function is y = a(x - h)^2 + k, where (h, k) is the vertex.

To complete the square, we need to add and subtract a constant inside the parentheses so that the expression inside the parentheses becomes a perfect square trinomial. We can do this by adding and subtracting (7/2)^2 = 49/4 inside the parentheses:

y = x^2 + 7x + 4

= (x^2 + 7x + 49/4) - 49/4 + 4 (adding and subtracting 49/4)

= (x + 7/2)^2 - 33/4

Hence, the vertex form is y = (x + 7/2)^2 - 33/4

NOTE: The vertex is (-7/2, -33/4).

Here is the correct question:

Write the quadrat function Y=x^2+7x+4 in vertex form

Learn more on Vertex form here: https://brainly.com/question/24850937

#SPJ1

the function f(x)=6x^2-180x=1000 represents the profit f(x) in thousands of dollars of selling x items. what is the meaning of the extreme value?

Answers

The extreme value of the function f(x) is the minimum value of the profit, which occurs when x = 15.

How to Determine the Extreme Value?

The given function f(x) represents the profit in thousands of dollars of selling x items. To find the meaning of the extreme value, we need to find the critical points of the function, which are the values of x where the derivative of the function is equal to zero or undefined.

The derivative of the given function is:

f'(x) = 12x - 180

Setting f'(x) = 0 to find critical points:

12x - 180 = 0

Solving for x, we get:

x = 15

So, x = 15 is the critical point of the function.

Now, we need to determine whether this critical point is a maximum or a minimum.

To do so, we can use the second derivative test. The second derivative of the given function is:

f''(x) = 12

Since f''(15) = 12 > 0, the critical point x = 15 is a minimum.

Therefore, the extreme value of the function f(x) is the minimum value of the profit, which occurs when x = 15. This minimum value represents the least amount of profit that can be earned by selling the items.

Learn more about the extreme value of a function on:

https://brainly.com/question/12499771

#SPJ1

Use Tools Find an object that you think has a mass greater
than 1 kilogram. Use a pan balance with kilogram and gram
weights to measure the mass of the object. Explain how you
measured the mass.

Answers

If the combined weight is 1.5 kilograms and the weight of the gram weights is 0.5 kilograms, then the mass of the object is 1 kilogram.

What is mass?

Mass is describes the amount of matter it contains. It is usually measured in kilograms or pounds. Mass is distinct from weight, which measures the force of gravity on an object.

To measure the mass of an object that I think has a mass greater than 1 kilogram, I will use a pan balance and kilogram and gram weights.

First, I will set the pan balance to 0 by adjusting the counterweight.

Then, I will place the object on one of the pans and add weights to the other pan until the balance is equal.

I will first use 1 kilogram weights and then add smaller gram weights until the pan balance is equal.

Once the pan balance is equal, the combined weight of the object and the weights will be the mass of the object.

I can then calculate the mass in kilograms by subtracting the weight of the gram weights from the total mass.

For more questions related to weight

https://brainly.com/question/29892643

#SPJ1

Suppose that you are an elementary school teacher and you are evaluating the reading levels of your students. You find an individual that reads 50 word per minute. You do some research and determine that the reading rates for their grade level are normally distributed with a mean of 85 words per minutes and a standard deviation of 20 words per minutes
At what percentile is the child’s reading level?

Answers

The student's reading level is at the 4.01st percentile. Answer: 4.01.

Given that you are an elementary school teacher and you are evaluating the reading levels of your students. You find an individual that reads 50 word per minute. You do some research and determine that the reading rates for their grade level are normally distributed with a mean of 85 words per minutes and a standard deviation of 20 words per minutes.The percentile of a given value represents the percentage of the distribution that falls below that value.To find the percentile rank of the student's reading level, we can use the Z-score formula:$$z = \frac{X - \mu}{\sigma}$$where X is the student's reading rate, μ is the mean reading rate for the grade level, and σ is the standard deviation of the reading rates for the grade level. Substituting the given values, we get:$$z = \frac{50 - 85}{20} = -1.75$$The negative sign indicates that the student's reading rate is below the mean rate for the grade level. Now we need to find the percentile of the Z-score -1.75.Using a standard normal table or calculator, we can find that the area to the left of -1.75 under the standard normal distribution is 0.0401. Therefore, the student's reading level is at the 4.01st percentile. Answer: 4.01.

Learn more about Percentile

brainly.com/question/1561673

#SPJ4

Solve the formula for r.

Answers

The solution for the formula V = πr² is A. r = √(V/(π)).

What is the equivalent expression?

Equivalent expressions are expressions that work the same even though they look different. If two algebraic expressions are equivalent, then the two expressions have the same value when we plug in the same value for the variable.

To solve for r in the formula V = πr², we need to isolate r on one side of the equation.

We can do this by dividing both sides of the equation by π and then taking the square root of both sides:

V/π = r²

√(V/π) = r

Therefore, the solution is A. r = √(V/(π)).

To learn more about the equivalent expression visit:

https://brainly.com/question/2972832

#SPJ1

Given matrix A, find -2A.

Answers

To find -2A, we simply multiply every element of A by -2. Therefore,

            6   -10   0

-2A  =  -6    4   -2

            2   -8   -14

What is matrix?

A matrix is a rectangular array of numbers, arranged in rows and columns. Matrices are used in many areas of mathematics, science, and engineering to represent and manipulate data.

Matrices can have any number of rows and columns, but are typically denoted by the letter A with a subscript indicating the number of rows and columns. For example, a matrix with 2 rows and 3 columns might be denoted as [tex]A_{2x3}[/tex].

To find -2A, we need to multiply every element of matrix A by -2. In other words, we need to apply the scalar multiplication operation to every element in the matrix.

Scalar multiplication is a simple operation where we multiply each element in a matrix by a scalar, which is just a regular number. In this case, our scalar is -2.

To perform scalar multiplication on a matrix, we simply multiply each element of the matrix by the scalar. So, for each element in matrix A, we can write:

(-2) * aij

where i is the row number and j is the column number of the element.

We can use this formula to find each element of -2A. Let's look at the first element, a11:

(-2) * a11 = (-2) * 5 = -10

So the first element of -2A is -10. We can repeat this process for each element in the matrix to get the following result:

            6   -10   0

-2A  =  -6    4   -2

            2   -8   -14

And that's it! We have successfully found -2A by applying scalar multiplication to every element of matrix A.

To know more about matrix visit:

https://brainly.com/question/29132693

#SPJ1

NEED HELP PLEASE HELP

Answers

Answer: b

Step-by-step explanation: b is right

M7 App P2of2B. Suppose that you are working for a chain restaurant and wish to design a promotion to disabuse the public of notions that the service is slow. You decide to institute a policy that any customer that waits too long will receive their meal for free. You know that the wait times for customers are normally distributed with a mean of 20 minutes and a standard deviation of 4 minutes. Use statistics to decide the maximum wait time you would advertise to customers so that you only give away free meals to at most 1% of the customers.a. Determine an estimate of an advertised maximum wait time so that 1% of the customers would receive a free meal. Round to one decimal place. __________ minutesb. Include a graph illustrating the solution. For the graph do NOT make an empirical rule graph, just include the mean and the mark off the area that corresponds to the 1% who would receive the refund. There is a Normal Distribution Graph generator linked in the resources area. Combine the above into as single file and upload using the link below. Choose Filec. Write a response to the vice president explaining your prescribed maximum wait time. Structure your essay as follows:An advanced explanation of the normal distributionWhy the normal distribution might apply to this situationDescribe the specific normal distribution for this situation (give the mean and standard deviation)Explain how the graph created in part b. represents the waiting times of the customers.Explain the answer to part a. in terms of both the customers who get a free meal and those who do not. Feel free to use the accurate answer in part a to determine a "nice" wait time to be used in the actual advertising campaign.Use the answers to parts a. and b. to explain how the proposal will not result in a loss of profit for the company.

Answers

The normal distribution is a mathematical model used to describe real-world data that occurs in many scenarios, including restaurant wait times. The normal distribution is characterized by a mean and a standard deviation; in this case, the mean wait time is 20 minutes, and the standard deviation is 4 minutes.

In order to find the maximum wait time for customers so that at most 1% of them would receive their meals for free, we can use the normal distribution graph.

The graph shows the probability of a customer waiting any given amount of time. The mean is the highest point on the graph, while the standard deviation can be seen as two "bumps" on either side of the mean. For this scenario, any customer who waits more than 25.5 minutes will be in the top 1% of wait times, and therefore, should receive their meal for free.

This provides a reasonable time limit for customers to expect their meal, while also helping to dispel any negative perceptions about the speed of service.

In terms of the company's profitability, offering free meals to the top 1% of customers does not present any significant risk. The 25.5 minute wait time is well above the average wait time of 20 minutes, so it's unlikely that the company will incur a significant loss due to this promotion.

To sum up, the maximum wait time to be advertised to customers so that 1% of them will receive their meals for free is 25.5 minutes. The normal distribution graph shows how this wait time is chosen, as it corresponds to the top 1% of wait times.

As the average wait time is much lower than this maximum wait time, this promotion is unlikely to cause the company any significant loss in profit.

For further information on normal distribution, refer below:

https://brainly.com/question/29509087

#SPJ11

The line I passes through the points (1, 4) and (-1,-5).
Find the gradient of line L.
Submit Answer

Answers

Answer:

9/2

Step-by-step explanation:

To find the gradient of a line passing through two points, we can use the formula:

m = (y2 - y1)/(x2 - x1)

where (x1, y1) and (x2, y2) are the coordinates of the two points on the line.

Using the points (1, 4) and (-1, -5), we have:

m = (-5 - 4)/(-1 - 1)

= (-9)/(-2)

= 9/2

Therefore, the gradient of line L is 9/2.

Assume that we want to construct a confidence interval. Do one of the following, as appropriate: (a) find the critical value ta/2, (b) find the critical value za/2, or (c) state that neither the normal distribution nor the t distribution applies.


Here are the summary statistics for randomly selected weights of newborn girls: n=180, x=28. 1 hg, s=6. 2 hg. The confidence level is 90%

Answers

The confidence interval then takes the form of x ± margin of error, which in this example is 28 ± 1.9, or (26.1, 29.9). This means that we are 90% confident that the true population mean of newborn girl's weights lies between 26.1 and 29.9 hg. the critical value t0.05/2, which is 1.699.

To construct a confidence interval with a 90% confidence level, we need to find the critical value t0.05/2. This critical value is found by using the t-distribution with a confidence level of 90% (0.90) and degrees of freedom equal to the sample size minus 1 (180 - 1 = 179). We can then use this critical value to calculate the margin of error of the confidence interval, which is equal to the critical value multiplied by the standard error (s/√n). In this example, that results in a margin of error of 1.699*(6.2/√180) = 1.9.

To construct a confidence interval with a 90% confidence level, we need to find the critical value t0.05/2. This critical value is found by using the t-distribution with a confidence level of 90% (0.90) and degrees of freedom equal to the sample size minus 1 (180 - 1 = 179). The t-distribution is used instead of the normal distribution because it is better suited to smaller sample sizes. We can then use this critical value to calculate the margin of error of the confidence interval, which is equal to the critical value multiplied by the standard error (s/√n). In this example, that results in a margin of error of 1.699*(6.2/√180) = 1.9. The confidence interval then takes the form of x ± margin of error, which in this example is 28 ± 1.9, or (26.1, 29.9). This means that we are 90% confident that the true population mean of newborn girl's weights lies between 26.1 and 29.9 hg.

Learn more about population mean here

https://brainly.com/question/19538277

#SPJ4

Hi, please help! I have attached the measurements! This us the question!
The cuboid-shaped container below is partly filled with water. What percentage of the container is filled with water? Give your answer to 1 d.p. ​

Answers

The percentage of the cuboid filled with water is given as follows:

53.85%.

How to obtain the volume of the rectangular prism?

The volume of a rectangular prism, with dimensions length, width and height, is given by the multiplication of these dimensions, according to the equation presented as follows:

Volume = length x width x height.

The dimensions of the cuboid are given as follows:

Length of 19 cm.Width of 6 cm.Height of 13 cm.

The filled dimensions of the cuboid are given as follows:

Length of 19 cm.Width of 6 cm.Height of 7 cm.

As only the height is different, the percentage filled is obtained as follows:

7/13 = 53.85%.

More can be learned about the volume of a rectangular prism at brainly.com/question/22070273

#SPJ1

I NEED HELP ON THIS ASAP!

Answers

A graph of each inequality is shown in the grid below.

A shape which the solution region represent is a rectangle.

How to graph this system of inequalities?

In order to graph the solution to the given system of inequalities on a coordinate plane, we would use an online graphing calculator to plot the given system of inequalities and then take note of the point of intersection;

0.4r ≤ 120     .....equation 1.

r ≥ 4(360/5)    .....equation 2.

By evaluating the given system of inequalities, we have;

r ≤ 120/0.4

r ≤ 300

r ≥ 4(360/5)

r ≥ 4(72)

r ≥ 288

By combining the system of inequalities, we have:

288 ≤ r ≤ 300

Based on the graph shown in the image attached below, we can logically deduce that the solution to the given system of inequalities is within the shaded region between the solid lines, and the point of intersection of these solid lines on the graph.

Read more on inequalities here: brainly.com/question/17064077

#SPJ1

work out the value of

7 squared + \sqrt{25 }

Answers

Answer:54

Step-by-step explanation:

7 squared + \sqrt{25 }

[tex]7^{2}=49\\and \ \\\sqrt{25}=5[/tex]

49+5=54

Answer:

54

Step-by-step explanation:

[tex]7 ^2 + \sqrt{25} \\= 49 + 5\\= 54[/tex]

Hope this helps!

Brainliest and a like is much appreciated!

A parabola has focus (5, 7) and directrix y=0 (the x-axis). Write an equation that says point (x, y) is
on the parabola. You do not need to put it into vertex form. If it's helpful, draw a sketch of the
parabola.

Answers

Answer:

  14(y -7/2) = (x -5)²

Step-by-step explanation:

You want an equation for the parabola with focus (5, 7) and directrix y=0.

Equation

The vertex of a parabola is halfway between the focus and the directrix. When the directrix is a horizontal line, the y-coordinate of the vertex is the average of the y-coordinates of the focus and directrix. The x-coordinate of the vertex is the same as that of the focus.

The scale factor in the vertex form equation is 1/(4p), where p is the distance from the vertex to the directrix.

Application

Here, the vertex y-coordinate is (7+0)/2 = 3.5. The vertex x-coordinate is 5. The distance from the vertex to the directrix is 3.5 -0 = 3.5.

Then the vertex form equation for the parabola can be written as ...

  y = a(x -h)² +k . . . . . . . . parabola with scale factor 'a' and vertex (h, k)

  y = 1/(4·3.5)·(x -5)² +3.5 . . . . . parabola with scale factor 1/(4·3.5) and vertex (5, 3.5)

The fraction can be eliminated to give the form ...

  14(y -3.5) = (x -5)²

What is the volume of the triangular prism? A) 57. 75 m3 B) 115. 5 m3 C) 231. 0 m3 D) 462. 0 m3

Answers

The volume of the triangular prism is 115.5m³.

Given that,

Base = 7m.

Height = 3m.

Length = 11m.

Therefore, The area of the triangle on one side = [tex]\frac{1}{2} bh[/tex]

                                                                                = [tex]\frac{1}{2}[/tex] × 7 × 3

                                                                                = 21/2

                                                                                = 10.5 m².

The volume of the prism = area of the triangle × height

                                                           = 10.5 × 11

                                                           = 115.5 m³.

Therefore, the volume of the triangular prism is 115.5m³.

To learn more about the volume of a prism, refer to:

https://brainly.com/question/28795033

#SPJ4

The question is incomplete, the complete question would be

What is the volume of the triangular prism? A) 57. 75 m3 B) 115. 5 m3 C) 231. 0 m3 D) 462. 0 m3

What is true about the three legs of an equilateral triangle?

Answers

Answer:

congruent, same length

Step-by-step explanation:

The three sides of an equilateral triangle are congruent.

They have the same length.

To prepare for his mountain biking trip, Rhyan bought four tire patches. Rhyan paid using a gift card that had $22.20 on it. After the sale, Rhyan’s gift card had $1.90 remaining. Which equations could you use to find the price of one tire patch? Select all that apply. 4x – 1.9 = 22.2 4x – 22.2 = 1.9 4x + 1.9 = 22.2 4x + 22.2 = –1.9 22.2 – 4x = 1.9

Answers

Answer:

3rd and 5th options (check below)

Step-by-step explanation:

The gift card has $22.20

After payment he had $1.90 left

What was charged for the 4 tire patches? $22.90 - $1.90

How many tire patches did he pay for? 4

Let the patch be X, 4 patches will be 4X

4X = 22.20 - 1.90

The cost of the patches + the balance on the gift card is also 22.20

4x + 1.90 =22.20

If you Subract the cost of 4tire patches from 22.20, you will have 1.90 on the gift card

22.2 - 4X = 1.9

These are the three right equations


i need help with a. b. and c.​

Answers

Check the picture below.

so if we just find the vertex of that parabolic path, we'd get how far up it went and how long it took

[tex]\textit{vertex of a vertical parabola, using coefficients} \\\\ h(t)=\stackrel{\stackrel{a}{\downarrow }}{-16}t^2\stackrel{\stackrel{b}{\downarrow }}{+16}t\stackrel{\stackrel{c}{\downarrow }}{+0} \qquad \qquad \left(-\cfrac{ b}{2 a}~~~~ ,~~~~ c-\cfrac{ b^2}{4 a}\right)[/tex]

[tex]\left(-\cfrac{ 16}{2(-16)}~~~~ ,~~~~ 0-\cfrac{ (16)^2}{4(-16)}\right) \implies \left( - \cfrac{ 16 }{ -32 }~~,~~0 - \cfrac{ 256 }{ -64 } \right) \\\\\\ \left( \cfrac{ -1 }{ -2 } ~~~~ ,~~~~ 0 +4 \right)\implies \stackrel{seconds ~~ feet }{\left(0.5~~,~~4 \right)}[/tex]

well, as you see in the picture, the horse hits the ground again when h(t) = 0

[tex]\stackrel{h(t)}{0}=-16t^2+16t\implies 0=-16t(t-1)\implies t= \begin{cases} 0\\ 1 \end{cases}[/tex]

so at t=0 and t=1 it's touching the ground, at t=0 when it begins to jump at t=1 when it thumps back down, took that long.

Angles Q and R form a right angle. Angle Q is twice as large as angle R. What is the measure of angle Q?

Answers

Answer:

60°

Step-by-step explanation:

Let m<R = x.

Let m<Q = 2x.

m<Q + m<R = 90

2x + x = 90

3x = 90

x = 30

m<Q = 2x = 2(30) = 60

Answer: 60°

Research shows that approximately 18 out of every 100 people have blue eyes and there are 50 people in a room what is the fraction of them having blue eyes make sure you leave the total other denominator

Answers

the fraction of people in the room with blue eyes is 9/50.

If approximately 18 out of every 100 people have blue eyes, then the fraction of people with blue eyes can be expressed as 18/100 or 0.18. To find the fraction of people with blue eyes in a room of 50 people, we need to multiply this fraction by the total number of people:

(0.18) x 50 = 9

So, there are approximately 9 people in the room with blue eyes. To express this as a fraction with a denominator of 50, we can write:

9/50

learn more about denominator here:

https://brainly.com/question/11156074

#SPJ4

The slopes of JK and HN both equal 0. What can you conclude about the segments?The segments are congruent.

The segments are rays.

The segments are vertical.

The segments are parallel.

Answers

The correct option is (c) i.e. The segments are parallel.

What are parallel lines?

Parallel lines are two lines in a two-dimensional space that never intersect, no matter how far they are extended in either direction. They always maintain the same distance between them and have the same slope. The symbol for parallel lines is "||".

In geometry, parallel lines are important because they create angles that are congruent or equal to each other when intersected by a third line, known as a transversal. This concept is used in many practical applications, such as in construction, engineering, and navigation.

The segments are parallel.

If the slopes of two lines are equal, it means that the lines are either parallel or they are the same line. In this case, since the two segments have zero slope, it means that they are horizontal lines. Horizontal lines are always parallel to each other, so we can conclude that the two segments are parallel.

To learn more about parallel lines, visit the link:

https://brainly.com/question/26961508

#SPJ1

Other Questions
How do I evaluate these? Which of these explains the feature that can form at the boundary of these two plates?A. A range of volcanoes because the oceanic plate melts underneath the continental plate, forming a line of volcanoes on the continentB. A broad canyon-like valley because the two plates act like a plow, digging out any soil in the plate's paths.C. A mountain range because the two colliding plates have equalcomposition and density, causing both to fold and form wide, thickmountainsD. Island arc because the oceanic plate melts underneath the continental plate, forming volcanic mountains the eventually become islands The UAE has multicultural cities. Explain and list at least three examples showing that cities in the UAE are multicultural.Guyz pls answer my question it's urgent 1. OBJECTIVEThis assignment will introduce you to COREscheduling.2. SPECIFICATIONSYou are to simulate the execution of processes by atablet with a large memory, one display, a multi-coreprocessing unit, and one solid-state drive. Each processwill be described by its start time followed by asequence of resource requests.These resources requests will include core requests(CORE), SSD requests (SSD) and input requests(INPUT). Your input will be a sequence of pairs as in:NCORES 2 // number of coresNEW 12000 // new processCORE 100 // request CORE for 100 msINPUT 5000 // request INPUT for 5000 msCORE 80 // request CORE for 80 msSSD 1 // request SSD for 1 msCORE 30 // request CORE for 30 msSSD 1 // request SSD for 1 msCORE 20 // request CORE for 20 msNEW 12040 // new process...All times will be expressed in milliseconds. Allarrival times will be monotonically increasing.Processor Management: Your program should have asingle ready queue. That queue should be a FIFO queueand keep all processes ordered according to their queuearrival time in strict first-come first-served order.SSD Management: SSD access times are much shorterthan disk access times with write requests taking lessthan a millisecond and read requests taking much lessthan that. As a result, write request timings will berounded up to one millisecond and read requests timingwill be rounded down to zero ms. SSD scheduling willbe strictly first-come first-served (FCFS).To simplify your life, we will also assume that:1. There is no contention for main memory,2. Context switch times can be neglected, and3. User think times and other delays, likeoverlapping windows, are included in the inputtimes.Program organization: Your program should read its inputfile name though input redirection as in:./a.out < input.txtYour program should have one process table with oneentry per process containing a process sequence number, theprocess class, its process arrival time and its current state(RUNNING, READY or BLOCKED).Since you are to focus on the scheduling actions takenby the system you are simulating, your program will onlyhave to intervene whenever1. A process is loaded into memory,2. A process completes a computational step.All times should be simulated.Each time a process starts or terminates your programshould print:1. The current simulated time in milliseconds,2. The sequence number of the process that terminates,and the states of all other active processesWhen all the processes in your input stream havecompleted, your simulator should print a summary reportlisting:1. The number of processes that have completed,2. The total number of SSD accesses,3. The average duration of a SSD access (including thewaiting time in the SSD queue),4. The processing unit utilization, that is, the averagenumber of busy cores (between zero and NCORES),5. The SSD utilization, that is, the fraction of time thatdevice was busy (between zero and one).3. IMPORTANTTo get full credit, your program should start by a block ofcomments containing your name, the course number, the duedate and a very short description of the assignment. Eachclass, method or function should start by a very briefdescription of the task it performs. essay the season the bring out the best in me explain the role played by the media in promoting the civil rights protests Your go-cart breaks down right before the end of a race, so you have to push it over the finish line. The go-cart has a mass of 85 kg.a. What is the weight of your go-cart?(I need to show my work) 63 - [(- 3){- 2 - 8 - 3}] [3{5 + (- 2)(- 1)}]PLS answer with proper explanation If the treasury bill has $10.000 par value 200 days to maturity and is quoted:Bid: 0,720 Ask: 0,630 then:a) The price for the buyer is $9.965b) The price for the seller is $9.965c) The price for the buyer is $9.970d) The price for the seller is $9.960 Which crop is mentioned as declining in some areas due to climate change?potatoesricewheatcoffeecorn What is the possible escape route for the group of volunteers on the Gautrain tunnels a. The manager of the Greenfield store has a personal friendship with a number ofemployees. He wants to get these employees positions at one of the other stores. How wouldyou respond to this human resources scenario? Four new sampling strategies have been proposed to help PTV determine whether enough cable subscribers are likely to purchase high-speed Internet Service. For each, indicate what kind of sampling strategy is involved and what (if any) biases might result.A) Run a poll on the local TV news, asking people to dial one of two phone numbers to indicate whether they would be interested.B) Hold a meeting in each of the fifteen towns, and tally the opinions expressed by those who attend the meetingsC) Randomly select one street in each town and contact each of the households on that street.D) Go through the companys customer records, selecting every 40th subscriber. Send employees to those homes to interview the people chosen. B. Choose one vehicle and explain what you would do differently. How does language help to shape one's cultural identity? 1. A bucket is filled from a hose that has a constant flow rate. Is the amount of water in the bucket best described by a linear or exponential function of time during the filling process? Explain.A. Since the amount added per unit time is constant, the amount of water in the bucket increases by a constant amount for equal time intervals. This is an exponential function.B. Since the amount added per unit time is constant, the amount of water in the bucket is multiplied by a constant factor for equal time intervals. This is an linear function.C. Since the amount added per unit time is constant, the amount of water in the bucket increases by a constant amount for equal time intervals. This is a linear function.D. Since the amount added per unit time is constant, the amount of water in the bucket is multiplied by a constant factor for equal time intervals. This is an exponential function.2. A bond is purchased for $1,000 that pays 6 percent of the purchase price annually. Is the amount earned described by a linear or exponential function?A. A bond is purchased for $1,000 that pays 6 percent of the purchase price annually. Is the amount earned described by a linear or exponential function?B. The interest paid each year is constant, so the amount earned increases by a constant amount for equal time intervals. This is a linear function.C. The interest paid each year is constant, so the amount earned is multiplied by a constant factor for equal time intervals. This is an exponential function.D. The interest paid each year is constant, so the amount earned increases by a constant amount for equal time intervals. This is an exponential function.3. A savings account has an initial balance of $1,000 and earns 3 percent interest compounded monthly. Is the balance of the account described by a linear or exponential function?A. The interest paid each month is a factor of the current balance, so the balance increases by a constant value for equal time intervals. This is an exponential function.B. The interest paid each month is a factor of the current balance, so the balance is multiplied by a constant factor for equal time intervals. This is an exponential function.C. The interest paid each month is a factor of the current balance, so the balance is multiplied by a constant factor for equal time intervals. This is a linear function.D. The interest paid each month is a factor of the current balance, so the balance increases by a constant value for equal time intervals. This is a linear function. Use the Dividend Growth Model to compute the expected price of a stock in 4 years. Each share is expected to pay a dividend of $1.30 in one year. Investors' annual required rate of return is 10%, and the expected growth rate of the dividend is 5.7% per annum How many 1/16 of an inch are in 4 inches CASE: NETFLIXAlthough Netflix's focus on firing B players is meant to drive motivation, it's not without its controversies. Indeed, an expose by the WallStreet Journal-which drew on interviews with 70 current and former employees-argued that the culture can seem ruthless. Somecomplaints revolve around the salience of the so-called "Keeper Test." This test asks managers to ponder whether they would fight to keepan employee if the employee received an offer from a competitor. If the answer to that question is "no," then the employee is probably notsomeone who should be retained. At one meeting of Netflix managers, one person admitted that he comes to work every day fearing thathe'll fail that test. Upon hearing that admission, one executive was reported to have responded "Good, because fear drives you."That emphasis on firing B players extends to the unusual way that Netflix handles those events. Specifically, the company performs a publicpostmortem of firing events via e-mails or face-to-face meetings. Those discussions-which are meant to reinforce core values of candor andtransparency-wind up focusing on the flaws and limitations of the fired colleague. Explained one employee about his own postmortem, "Itwas certainly awkward for some, but was also consistent with the culture-there is sometimes a cost to transparency." Another employeeoffered, "Anything like that can definitely turn into a pile on. But in my experience overall, I found them to be generally useful." For its part,the company works hard to ensure that firings aren't a surprise. Its annual feedback process is 360-degree in nature, meaning thatemployees receive feedback from bosses, coworkers, and subordinates. And-given the culture-it's no surprise that the commentsassociated with such feedback don't pull any punches.One danger of this sort of hard-driving approach is that it could prevent Netflix employees from living up to the company's other corevalues. For example, it may seem hard to be creative and innovative in a company known for firing people for ineffective performance. Andit may be hard to be passionate about your work if you're feeling anxiety about your job security. For its part, Netflix points out that thecompany placed second in Comparably's list of "Happiest Employees." It also notes that its firing rate of 8 percent is only slightly higherthan the 6 percent national average. Perhaps most tellingly, its rate of voluntary turnover is only 4 percent, significantly below the 13percent national average.Imagine working for a company whose product was so omnipresent in people's lives. How would that affect your motivation?What motivation theories would help explain such effects?Consider the "we give adequate performers a generous severance package" mantra. Would that philosophy increase yourmotivation or decrease your motivation? Why?Think about a scenario where an employee is fired for being a B player. How should that event be handled exactly? How muchinformation should a manager share with the employee's coworkers? What are the benefits of more information and what are thebenefits of less information? why are convergent plate boundaries associated with deeper earthquakes? group of answer choices because of the high rate of fault slip because of mantle delamination because of deep plate subduction they aren't