Answer:
Chuck's average speed is 60.
Two children are spinning on a miracle round. What is 50 cm from the center and the other is 100 cm from the center. Which child has the larger linear speed?
Answer:
The one that is 100 cm from the center.
Explanation:
Given that merry-go-round means moving at uniform circular motion or constant angular speed. Hence the person who is closer to the center is moving at a slower speed, while the one far away from the center has a larger linear speed because he has moved a long distance in the same amount of time, despite being on these objects.
To illustrate
A with the 50 cm
B with the 100 cm
Hence, to get speed, we have
A = 2 * pi * 50 / T
B = 2 * pi * 100 / T
And by the explanation of angular speed
We have w = 2*pi/T where w is the angular speed in radians/s
Hence we have
A = 50w
B = 100w
Therefore, the one that is 100 cm from the center has a larger linear speed.
Which of the following best describes the velocity of an object? *
8 points
A. 30 m/s
B. 30 m to the East
C. 30 m/s to the East
D. 30 m
A. 30 m/s . . . speed
B. 30 m to the East . . . displacement
C. 30 m/s to the East . . . velocity
D. 30 m . . . distance
function Of The glottis
Answer:
Their function is to produce sound by allowing the free edges of the folds to vibrate against one another and also to act as the laryngeal sphincter when they are closed.
What distance was covered in the 1st 2 seconds?
A.0 m B. 4m
C. 2m C. 8m
Answer:
E
Explanation:
Elaphants and noodles+ramen and sushi
The photo shows two yeast cells. Each cell is an individual organism. Which sentence best describes what happened to each cell during cell growth?
A. It will become many different cells.
B. It will produce offspring with a mate.
C. It will divide in half to form two new cells.
D. It will become larger by taking in nutrients.
The answer is option c - It will divide in half to form two new cells..
Explanation:
The sentence that best describes what happened during cell growth is ;
( D ) It will become larger by taking in nutrients
As the yeast cells begin to grow ( i.e. cell growth ), they will require more nutrients and as they take in the necessary nutrients they will gradually increase in size ( becoming larger ) which is a vital sign of cell growth and development, which will be seen in the yeast cells as they undergo cell growth.
The production of offsprings with a mate does not describe an activity that occurs in cell growth.
Hence we can conclude that The sentence that best describes what happened during cell growth is, It will become larger by taking in nutrients.
Learn more : https://brainly.com/question/24893507
Melissa my pet cow from childhood that i could ride like a horse had a weight of 0.65 tons. Philip my pet rabbit had a weight of 192 ounces. How many philips would it take to weigh as much as one melissa
Answer:
11 times the weight of Philip.
Explanation:
From the question given above, the following data were obtained:
Weight of Melissa (i.e cow) = 0.65 tons
Weight of Philip (i.e rabbit) = 192 ounces
Next, we shall express the weight of Philip (i.e the rabbit) in tons. This can be obtained as follow:
1 ounce = 3.125×10¯⁵ ton
Therefore,
192 ounce = 192 ounce × 3.125×10¯⁵ ton / 1 ounce
192 ounce = 0.06 ton
Thus, the weight of Philip (i.e the rabbit) in ton is 0.06 ton.
Next, we shall determine the ratio of the weight of Melissa (i.e the cow) to the weight of Philip (i.e the rabbit). This can be obtained as follow:
Weight of Melissa (i.e cow) = 0.65 ton
Weight of Philip (i.e rabbit) = 0.06 ton
Melissa /Philip = 0.65/0.06
Melissa /Philip = 11
Melissa = 11 × Phillip
Thus, it will take 11 times the weight of Philip to weigh as much as Melissa.
3/50
How many joules of energy does a 100-watt light bulb use per hour? How fast would a 70-kg person have to run to have that amount of kinetic energy?
A
360000.J. 101 m/s
B
320000 J 130 m/s
C
380000 J 120. m/s
340000 J. 140 m/s
Answer:
in the statement of account very seriously
1. A ball is thrown straight up.if the launch velocity is 15 m/s, at what velocity will the ball return to the thrower's hand?
2. A boat moves across a river going 18 m/s. At the same time there is a current flowing at a right angle to the boat at 6 m/s. What is the resulting velocity of the boat?
Answer:
1) The velocity of the ball return to the thrower's hand is -15 meters per second.
2) The resulting velocity of the boat is [tex]\vec v_{B} = 6\,\hat{i}+18\,\hat{j}\,\left[\frac{m}{s} \right][/tex].
Explanation:
1) Let suppose that ball experiments a free fall, that is an uniform accelerated motion, in which effects from gravity and Earth's rotation can be neglected. The velocity of the ball is represented by the following equations of motion:
Position
[tex]v_{o}\cdot t -\frac{1}{2}\cdot g\cdot t^{2} = 0[/tex]
[tex]t\cdot \left(v_{o}-\frac{1}{2}\cdot g\cdot t \right) = 0[/tex] (1)
Velocity
[tex]v = v_{o}-g\cdot t[/tex] (2)
Where:
[tex]t[/tex] - Time, measured in seconds.
[tex]g[/tex] - Gravitational acceleration, measured in meters per square second.
[tex]v_{o}[/tex] - Initial velocity of the ball, measured in meters per second.
[tex]v[/tex] - Final velocity of the ball, measured in meters per second.
From (1), we get the time when the ball returns to the thrower's hand:
[tex]v_{o}-\frac{1}{2}\cdot g\cdot t = 0[/tex]
[tex]t = \frac{2\cdot v_{o}}{g}[/tex]
And then we apply this result in (2):
[tex]v = v_{o}-g\cdot \left(\frac{2\cdot v_{o}}{g} \right)[/tex]
[tex]v = -v_{o}[/tex] (3)
Then, the velocity of the ball return to the thrower's hand is -15 meters per second.
2) The resulting velocity of the boat ([tex]\vec v_{B}[/tex]) is represented by the vectorial sum of the velocity of the boat relative to the river ([tex]\vec v_{B/R}[/tex]) and the velocity of the river ([tex]\vec v_{R}[/tex]), both measured in meters per second, that is:
[tex]\vec v_{B} = \vec v_{R}+\vec {v}_{B/R}[/tex] (4)
If we know that [tex]\vec v_{R} = 6\,\hat{i}\,\left[\frac{m}{s} \right][/tex] and [tex]\vec v_{B/R} = 18\,\hat{j}\,\left[\frac{m}{s} \right][/tex], then the resulting velocity of the boat is:
[tex]\vec v_{B} = 6\,\hat{i}+18\,\hat{j}\,\left[\frac{m}{s} \right][/tex]
The resulting velocity of the boat is [tex]\vec v_{B} = 6\,\hat{i}+18\,\hat{j}\,\left[\frac{m}{s} \right][/tex].
Which object has the most momentum?
A) a mass of 100, kg with a velocity of 2.0 m/sec
B) a mass of 100 kg with a velocity of 32.0 m/sec
C) a mass of 15 kg with a velocity of 200. m/ sec
The place where potential energy is zero is
a) At height equal to double the radius of the earth
b) At infinity
c) At a height equal to half the radius of the earth
d) At a depth equal to 1/3 radius of the earth
Answer:
D. At a depth equal to 1/3 radius of the earth
While the boys were playing baseball, one of the boys decides to kick his soccer ball high into the air. As the ball goes upward, which type of energy is increasing?
A.) Kinetic Energy
B.) Thermal Energy
C.) Potential Energy
D.) Mechanical Energy
which is the smallest particle containing the same characteristics for a compound?
Answer:
A compound is a substance that consists of two or more elements in a unique composition. The smallest particle of a compound is called a molecule. Chemical bonds hold together the atoms of molecules
My Lou Vee Air Car's propeller rotates, but it does not move the car forward. Can someone please help?? This is due on Monday!
Answer:
The force to get the plane moving, and to balance the friction so it does not stop, is provided by the propeller. However, the wheels provide the acceleration of the car.
Explanation:
why the gaps left between succesive rails on a railway tracks
Small gaps which function as expansion joints are deliberately left between the rail ends to allow for expansion of the rails in hot weather. ... Because of these small gaps, when trains pass over jointed tracks they make a "clickety-clack" sound.
In which case would electrical potential energy be built up and stored in the electric field?
a) A positive charge is moved toward a negative charge.
b) A positive charge is moved toward a positive charge.
c) A negative charge is moved away from a negative charge.
d) none of the above.
Thank you!
Answer: b) A positive charge is moved toward a positive charge.
Una curva de radio R = 75 [m] tiene un peralte hecho de tal forma que un auto andando a v1 = 35 [m/s] no derrape incluso con el piso congelado (sin roce). ¿Cuál es el coeficiente de roce estático mínimo necesario entre las ruedas y el pavimento para que, en un día seco y soleado, el auto no derrape cuando avanza a v2 = 118 [m/s]?
Answer:
053.
Explanation:
Given that the radius of curvature of the path, R = 75 m.
Speed of the car on that path , [tex]v_1 = 35 m/s[/tex]
The centripetal force,[tex]F_c[/tex] acting on the body having mass, m, when it moves with the velocity v on curved path having radiusR
Ris[tex]F_c = mv^2/R[/tex]
Gravitational force, [tex]F_g[/tex] = mg.
Let tha angle of superelevation is [tex]\theta.[/tex]
As the car does not skid even with zero friction, so
[tex]mg\sin\theta = (mv_1^2)/2 \cos\theta[/tex]
[tex]\Rightarrow \tan\theta = v_1^2/2g=\cdots(i)[/tex]
On sunny day, let the minimun static friction coefficient between the wheels and the pavement is [tex]\mu.[/tex]
As [tex]v_2[/tex] = 118 m/s is greater than v_so the car tends to skid in upper direction and the frictional
force,f, will acts is downward direction.
As there is no skidding, so
[tex]f+ mg\sin\theta= (m(v_2)^2)/R\cos\theta[/tex]
[tex]\Rightarrow f=(m(v_2)^2)/R\cos\theta - mg\sin\theta[/tex]
where [tex]f= \mu N.[/tex]
[tex]So, \mu = \frac {(m(v_2)^2)/R\cos\theta - mg\sin\theta}{N} \cdots(ii)[/tex]
Where N is the normal reaction can be determined by balancing the force in perpendicular direction of the plane.
[tex]N= mg\cos\theta+\frac {m(v_2)^2}{R}\sin\theta[/tex]
From equation (ii)
[tex]\mu = \frac {(m(v_2)^2)/R\cos\theta - mg\sin\theta}{mg\cos\theta+\frac {m(v_2)^2}{R}\sin\theta}[/tex]
[tex]=\frac{-g\tan\theta+v^2/R}{v_2^2\tan\theta+g}[/tex]
[tex]= \frac {(m(v_2)^2)/R\cos\theta - mg\sin\theta}{mg\cos\theta+\frac {m(v_2)^2}{R}\sin\theta}[/tex]
[tex]=\frac{-g(v_1^2/2g)+v^2/R}{v_2^2(v_1^2/2g)+g}[/tex]
[tex]= \frac{v_2^2/R-v_1^2/R}{g+v_2^2/R\times v_1^2/Rg}[/tex]
[tex]=\frac{118^2/75-35^2/75}{9.81+118^2/75\times 35^2/(75\times 9.81)}[/tex]
=0.53
Hence, the minimum coefficient of friction is 0.53.
1. A motorcycle stunt driver rides his motorcycle off a small ledge
that is 8.4 meters high. His initial velocity as he rides off the cliff is
24 m/s in the horizontal direction.
a. How long does it take before he lands on the ground below?
b. How far away from the base of the cliff does he travel while in
the air?
Answer:
Explanation:
Given
Height S = 8.4m
Initial velocity u = 24m/s
Required
Time it will take to reach the ground
Using the equation of motion
S = ut +1/2gt²
8.4 = 24t + 1/2(9.8)t²
8.4 = 24t+4.9t²
4.9t²+24t - 8.4 = 0
Multiply through by 10
49t²+240t-84 = 0
Factorize
t = -240±√240²-4(49(-84)/2(49)
t = -240±√57600+16464/98
t = -240±√74064/98
t = -240±272.15/98
t = 32.15/98
t = 0.328seconds
Hence it takes 0.328seconds before it lands on the ground below.
b) The horizontal distance is the range expressed as;
R = u²/g
R = 27²/9.8
R = 729/9.8.
R = 74.39m
a. The time it took before the motorcycle stunt driver lands on the ground below is 1.31 seconds.
b. The distance from the base of the cliff that the motorcycle stunt driver traveled while in the air is 31.44 meters.
Given the following data:
Maximum height = 8.4 meters.Initial velocity = 24 m/s.We know that the acceleration due to gravity (g) of an object on planet Earth is equal to 9.8 [tex]m/s^2[/tex]
a. To determine how long (time) it took before the motorcycle stunt driver lands on the ground below:
At maximum height, time is given by the formula:
[tex]Time = \sqrt{\frac{2H}{g} }[/tex]
Where:
g is the acceleration due to gravity.H is the maximum height.Substituting the given parameters into the formula, we have;
[tex]Time = \sqrt{\frac{2\times 8.4}{9.8} }\\\\Time = \sqrt{\frac{16.8}{9.8} }\\\\Time =\sqrt{1.7413}[/tex]
Time = 1.31 seconds.
b. To determine how far (distance) away from the base of the cliff the motorcycle stunt driver traveled while in the air:
[tex]Horizontal\;distance = horizontal\;speed \times time\\\\Horizontal\;distance = 24 \times 1.31[/tex]
Horizontal distance = 31.44 meters.
Read more here: https://brainly.com/question/18562863
1. Discuss how we use trial and error, algorithms, heuristics, and insight to solve problems. For each concept, define the term and then describe an incident (either from your own experience or that of a friend) in which the concept was used to determine a solution to a specific problem. You must use specific details of the incident and terms from our module to show me you understand the concept. (Total 64 points)
2., How can confirmation bias and fixation can interfere with effective problem solving. In this portion of your response, for each concept, define the term and then describe an incident (either from your own experience or that of a friend) in which the concept interfered with an appropriate solution being determined. You must use specific details of the incident and terms from our module to show me you understand the concept. (Total 32 pts).
Answer: used concepts to simplify and order the world around us, categories: objects, events, ideas, or people
hierarchies: subdivide categories into smaller more detailed units, prototypes: best example
algorithm: time-consuming but thorough set of rules or procedures
heuristics: simpler way of thinking, solve problems but maybe incorrect solutions
insight: flash of inspiration that solves problem
representativeness heuristic: judge likelihood of things in terms of how they represent our prototype
availability heuristic: judge likelihood of things based on how vivid they are or how readily they come to mind.
Explanation: i hope that helped!
State the career function of civil engineering
Answer:
Civil engineers design major transportation projects. Civil engineers conceive, design, build, supervise, operate, construct and maintain infrastructure projects and systems in the public and private sector, including roads, buildings, airports, tunnels, dams, bridges, and systems for water supply and sewage treatment.
Anyone play Among US?
Answer:
Yes
Explanation:
Its a good game.
Answer:
oof
Explanation:
Which material rises from cracks in oceanic crust?
Answer:
trenchs and magma
Explanation:
Answer: Ridges form along cracks (divergent boundaries) in the oceanic crust (Molten rock (magma) rises through these cracks and pushes to both sides. When it cools, it forms new oceanic crust. The old crust is pushed away and new crust takes over. This is called Sea-Floor Spreading.
In a lacrosse game a ball is thrown with a force of 2000 N. The throwing force acted for 0.8
seconds. If the ball had a change in velocity, Av, of 50 m/s, what is the mass of the ball?
Answer:
Mass, m = 32 kg
Explanation:
Given that,
Force, F = 2000 N
The change in velocity, (v-u) = 50 m/s
Time, t = 0.8 s
We need to find the mass of the ball. The net force acting on an object is given by :
F = ma
Where a is acceleration
[tex]F=\dfrac{m(v-u)}{t}\\\\m=\dfrac{Ft}{(v-u)}\\\\m=\dfrac{2000\times 0.8}{50}\\\\m=32\ kg[/tex]
So, the mass of the ball is 32 kg.
Alex wants to take a small road trip over the weekend, but
needs to be back before Monday. He travels 450 miles and
it takes him 9 hours. What unit of measurement should
Alex be measuring his speed with
Answer:
Miles is the distance unit. Hours is the time unit.
Explanation:
During a laboratory experiment, the temperature of the gas in a balloon is varied and the
volume of the balloon is measured.
A)
Which quantity is the independent variable?
B)
Which quantity is the dependent variable?
if a truck goes 30 kilometers in 30 minutes what is the average speed
Answer:
60 km per hour
Explanation:
if you drive for 30 min and go 30km then if you drive for 60 min(1hr) then you would have driven 60km.
Answer:
60
Explanation:
hope this helps
A group of students is making paper airplanes. They think that the kind of paper and the design of the airplane may affect how for each paper airplane fles. The students first test if the kind of paper affects how far the
airplane fies. They make
several otrplanes out of different kinds of paper, using
the same design Why is it important that all the airplanes have the same design?
Help please !!
Answer:
The reason why it is important that all the airplanes have the same design is that the students first test is an experiment to determine the effect of the paper kind on the distance the airplane flies
The first experiment, therefore measures the effect of the independent variable, which is the kind of paper on the dependent variable, which is how far the paper flies
The constant or the factor held constant in the experiment is the design of the airplane, so as to ensure that changes in the distance flown by the airplane are due to the changes in the kind of paper alone
Explanation:
A ball weighing 2.0 N falls through a distance of 4 m.
Answer:
This question is incomplete, a possible question would be to calculate the work done by the ball.
Work done = 8J
Explanation:
Work done by an object is calculated my multiplying the force by the distance.
The weight of this ball is 2.0N, which also represents the force exerted by the ball. The ball travels through a distance of 4m
Hence, work done = F × d
Work done = 2N × 4m
Work done = 8Nm or 8J
What does the triangle mean in physics?
In physics, the triangle symbol (∆) typically represents a change or difference in a particular quantity.
A triangle is often used to denote the difference between two values of a variable. For example, if we have two values of time, t1 and t2, the change or difference in time can be represented as Δt = t2 - t1, where Δt is the triangle symbol indicating the change in time. Similarly, it can be used to represent differences in other physical quantities such as displacement (∆x), velocity (∆v), or temperature (∆T). The triangle symbol (∆) is a shorthand notation commonly used in physics to indicate changes or differences.
In terms of change in displacement, the triangle symbol (∆) represents the difference between two positions or locations. It indicates the change in the object's position from an initial point to a final point.
For example, if an object initially starts at position x1 and then moves to position x2, the change in displacement (∆x) can be calculated as ∆x = x2 - x1. Here, ∆x represents the difference or change in the object's displacement.
The magnitude of ∆x gives the overall distance traveled by the object, and its sign indicates the direction of the displacement. A positive ∆x signifies a displacement in the positive direction (e.g., to the right or upward), while a negative ∆x represents a displacement in the negative direction (e.g., to the left or downward).
Therefore, The triangle symbol (∆) is commonly used in physics equations to denote changes or differences in various quantities, including displacement, velocity, time, and more. It helps us analyze and quantify the differences between two values of a physical quantity.
To learn more about the triangle symbol click:
https://brainly.com/question/30637056
#SPJ6
Which procedure would best demonstrate that moving magnet causes an electric current to flow in a wire coil?
Answer:
D
Explanation:
I took the test
The procedure that would best demonstrate that moving magnet causes an electric current to flow in a wire coil is connect a wire coil to an ammeter. Move a bar magnet into and out of the wire coil as you observe the ammeter. The correct option is D.
What is electric current?The flow of electricity in an electronic circuit, as well as the amount of electricity flowing through a circuit, are referred to as electric current. It is expressed in amperes (A).
The greater the value in amperes, the more electricity flows through the circuit.
When an electron is introduced into a wire, a free electron is attracted to a proton in order to be neutral.
Forcing electrons out of their orbits can result in an electron shortage. Electric current is the continuous movement of electrons in a wire.
Connecting a wire coil to an ammeter is the best way to demonstrate that a moving magnet causes an electric current to flow in a wire coil. As you watch the ammeter, move a bar magnet in and out of the wire coil.
Thus, the correct option is D.
For more details regarding electric current, visit:
https://brainly.com/question/2264542
#SPJ5
A ball is released from a hot air balloon moving downward with a velocity of
-10.0 meters/second and a height of 1,000 meters. How long did it take the ball to reach the surface of Earth? Given: g = -9.8 meters/second2.
A
11.2 seconds
B.
12.1 seconds
C.
13.3 seconds
D.
13.5 seconds
E.
14.2 seconds