calculate the heat capactity of an 100 unkwon metal when it is place din a 100ml of water. the initial temperature of the water was 23 degrees and the final temperature was 57

Answer:333.3333 mL or 333mL

Explanation:

M1V1 = M2 V2

M1= 3.00 M

V2= 2500 ml

M2= 0.400M

V1= solving for

V1= M2V2/M1

0.400 X 2500 / 3.00  =

The concentration of the solution is 7.02 × 10⁻⁴ mol/L.

The Beer-Lambert law or Beer's law states that the amount of light absorbed by a solution is directly proportional to the concentration of the absorbing material in the solution, the path length, and the absorption coefficient.

According to Beer's law,

A = εcl

where A is the absorbance, ε is the molar absorptivity, c is the concentration, and l is the path length.

Let's find the concentration of the solution from the given data using Beer's law.

A = εcl

0.929 = ε × c × l

Let's find the molar absorptivity (ε) from the data given.

Experimental beer's law for copper(ii) ions in solution at 814 nm was determined to be

ε = 1.32 × 10³ mol⁻¹ L cm⁻¹

From the data given, the path length is not mentioned.

Let's consider the path length as 1 cm.

So, l = 1 cm.

0.929 = (1.32 × 10³ mol⁻¹ L cm⁻¹) × c × 1 cmc

= 0.929/1.32 × 10³ mol/L

= 7.02 × 10⁻⁴ mol/L

The concentration of the solution is 7.02 × 10⁻⁴ mol/L.

To learn more about The Beer-Lambert law refer to:

https://brainly.com/question/30404288

#SPJ11

The correct name for the compound is 2-methylprop-2-ene, or 2-methylpropene. This alkene has a (E) configuration, meaning the two groups with the highest priority (the methyl group and the hydrogen atom) are on opposite sides of the double bond. The 1993 IUPAC naming convention requires the use of hyphens (-) rather than endashes (-) when specifying the location of the substituents on an alkene.

Dehydration of alcohols is an elimination reaction where a proton from the alcohol is added and a leaving group is removed. This type of reaction is reversible and the reverse reaction is hydration of an alkene. Tertiary alcohols typically undergo dehydration the fastest, followed by secondary and primary alcohols.

Overall, dehydration of alcohols is an elimination reaction which is reversible and the reverse reaction is hydration of an alkene. Tertiary alcohols typically undergo dehydration the fastest, followed by secondary and primary alcohols. The alkene product is more stable than the original alcohol due to the presence of the double bond and its ability to create a resonance structure.

Know more about  Tertiary alcohols here:

https://brainly.com/question/30763057

#SPJ11

Answer:

n (moles) = m (mass) / M (molar mass)

Explanation:

divide the mass by the molar mass, and you have your answer

The pH does not decrease drastically because the HCl reacts with the  nitrite ion present in the buffer solution is: C) nitrite ion.

In this case, nitrous acid (HNO2) and sodium nitrite (NaNO2) are used to prepare the buffer solution. The nitrous acid is a weak acid, and the nitrite ion (NO2-) is its conjugate base. The presence of both the weak acid and its conjugate base makes this solution a buffer solution.

When a small amount of HCl is added to the buffer solution, it reacts with the nitrite ion present in the solution according to the following equation:

HCl + NO2- -> HNO2 + Cl-

The HCl donates a proton to the nitrite ion, forming nitrous acid and chloride ion. This reaction consumes some of the added HCl, which prevents the pH from decreasing drastically.

Therefore, the correct answer is option C) nitrite ion.

Learn more about nitrite ion here:https://brainly.com/question/12101971

#SPJ1

The number of chlorine atoms present in 2 molecules of CCl₄ is 4.82×10²⁴ atoms

We'll begin by obtaining the mole of chlorine, Cl present in 2 molecules of CCl₄. This is shown below:

1 molecule of CCl₄ contains 4 moles of Cl

Therefore,

2 molecule of CCl₄ will contain = 2 × 4 = 8 moles of Cl

Finally, we shall determine the number of chlorine atoms present in the compound. Details below:

1 mole of Cl = 6.02×10²³ atoms

Therefore,

8 moles of Cl = (8 mole × 6.02×10²³ atoms) / 1 mole

8.1 moles of Li = 4.82×10²⁴ atoms

Thus, we can conclude that the number of chlorine atoms is 4.82×10²⁴ atoms

Learn more about number of atoms:

brainly.com/question/15488332

#SPJ1

Complete question:

How many chlorine atoms are there in 2 molecules of CCl₄

The maximum mass of water that can be produced in a reaction between 1 mol of glucose and 1 mol of oxygen is 18.015 g

Let's find out step-by-step:

The balanced equation for the reaction between glucose (C₆H₁₂O₆) and oxygen (O₂) to produce carbon dioxide (CO₂) and water (H₂O) is:

C₆H₁₂O₆ + 6O₂ → 6CO₂ + 6H₂O

We first need to identify the limiting reagent to calculate the maximum mass of water produced in a reaction between 1 mol of each reactant. Since there is 1 mol of glucose and 1 mol of oxygen, we can calculate how many moles of oxygen are required for 1 mol of glucose:

1 mol C₆H₁₂O₆ × (6 mol O₂ / 1 mol C₆H₁₂O₆) = 6 mol O₂

Since we only have 1 mol of oxygen available, oxygen is the limiting reagent in this reaction. Now, we can calculate the moles of water produced based on the stoichiometry of the balanced equation:

1 mol O₂ × (6 mol H₂O / 6 mol O₂) = 1 mol H₂O

Finally, we can calculate the maximum mass of water produced by multiplying the moles of water by its molar mass (18.015 g/mol):

1 mol H₂O × 18.015 g/mol = 18.015 g

So, the maximum mass of water produced in a reaction between 1 mol of glucose and 1 mol of oxygen is 18.015 g.

Learn more about limiting agents: What is limiting reagent? https://brainly.com/question/26905271

#SPJ11

Therefore, the number of moles of barium sulfate formed from 0.0831 mol of magnesium sulfate is equal to 0.0831 mol.

By possibly inhibiting calcium-mediated contraction, reducing acetylcholine release from neuromuscular junctions, and decreasing histamine-induced airway spasm, magnesium sulphate (MgSO4) can calm smooth muscles.

The balanced chemical equation for the reaction between magnesium sulfate and barium chloride is:

MgSO4 + BaCl2 → BaSO4 + MgCl2

According to the equation, one mole of magnesium sulfate (MgSO4) reacts with one mole of barium chloride (BaCl2) to produce one mole of barium sulfate (BaSO4).

So, 0.0831 mol of magnesium sulfate will produce 0.0831 mol of barium sulfate.

This is because the stoichiometric ratio of magnesium sulfate to barium sulfate is 1:1, which means that for every mole of magnesium sulfate that reacts, one mole of barium sulfate is produced.

To know more about moles visit:-

brainly.com/question/26416088

#SPJ1

The forward reaction for Reaction B is endothermic, as indicated by the negative change in enthalpy (-91 kJ/mol) for the forward reaction.

If Reaction B was at equilibrium and then was heated, the amount of CH₃OH would be less after the reaction adjusts to the new temperature. This is because the forward reaction is endothermic, meaning that an increase in temperature would shift the equilibrium towards the reactants side to counteract the increase in temperature.

If the pressure in the container of Reaction B was increased, the amount of CH₃OH would be more after the reaction adjusts to the new pressure. This is because the forward reaction produces fewer moles of gas than the reverse reaction, so increasing the pressure would shift the equilibrium towards the side with fewer moles of gas (the products side) to counteract the increase in pressure.

If H₂ was added to Reaction B at equilibrium, the amount of CH₃OH would be more after the reaction adjusts. This is because H₂ is a reactant in the reverse reaction, so adding more H₂ would shift the equilibrium towards the products side to counteract the increase in H₂.

If H₂ was added to Reaction B at equilibrium, the amount of CO would be less after the reaction adjusts. This is because CO is a product in the forward reaction, so adding more H₂ would shift the equilibrium towards the products side to counteract the increase in H₂, resulting in a decrease in CO.

To learn more about endothermic refer to:

brainly.com/question/23184814

#SPJ4

The molarity of Tylenol is 0.21 M, rounded to two significant figures. Hence, the correct option is (B) i.e. 0.21 M.

To find the molarity of Tylenol, we need to know the number of moles of acetaminophen present in 5 mL of medicine.

First, let's calculate the molecular weight of acetaminophen:

C = 12.011 g/mol x 8 = 96.088 g/mol

H = 1.008 g/mol x 9 = 9.072 g/mol

N = 14.007 g/mol x 1 = 14.007 g/mol

O = 15.999 g/mol x 2 = 31.998 g/mol

Total molecular weight = 96.088 g/mol + 9.072 g/mol + 14.007 g/mol + 31.998 g/mol = 151.165 g/mol

Next, we can use the given mass of acetaminophen in 5 mL of medicine to calculate the number of moles:

0.16 g acetaminophen x (1 mol / 151.165 g) = 0.001058 mol

Finally, we can use the definition of molarity to calculate the molarity of Tylenol:

Molarity = moles of solute / volume of solution in liters

Since we have 0.001058 moles of acetaminophen in 5 mL of medicine, which is equivalent to 0.005 L of solution, we can calculate the molarity as:

Molarity = 0.001058 mol / 0.005 L = 0.2116 M

To know more about molarity please refer: brainly.com/question/8732513

#SPJ1

The subscript of the oxygen molecule in the equation 2Mg + O2 → 2MgO is 2.

This means that two oxygen molecules (O2) are involved in the reaction, and they combine with two magnesium atoms (2Mg) to form two magnesium oxide molecules (2MgO). The subscript "2" in front of MgO indicates that two MgO molecules are formed as a result of the reaction. The equation 2Mg + O2 → 2MgO represents a combustion reaction in which magnesium (Mg) reacts with oxygen (O2) to produce magnesium oxide (MgO). This is an example of an exothermic reaction, which releases energy in the form of heat and light.

learn more about exothermic reaction here:

https://brainly.com/question/579952

#SPJ4

Carbon NMR spectroscopy is a powerful analytical tool for determining the number of unique carbons present in a molecule, as well as their respective chemical environments. By analyzing the quartet, doublet, and singlet peaks, scientists can identify unique carbon environments and the associated chemical structure of the molecule.

Carbon NMR spectroscopy produces a spectrum of signals that represent the unique chemical environment of each carbon atom in a molecule. The number of carbon signals in the spectrum corresponds to the number of carbons in the molecule, meaning all carbons will be detected in the NMR spectrum. In most carbon NMR spectra, the carbon signals appear as quartet, doublet, and singlet peaks, each of which represent different types of carbon environments.

For example, consider the structure of toluene. CH3 peaks. The methyl peak will appear further upfield than the carbons of the ring. This is because the methyl group has a more electronegative environment than the ring carbons due to the three hydrogens that are attached to the carbon, resulting in a higher electron density. As a result, the methyl peak will appear further upfield than the carbons of the ring.

Know more about NMR spectroscopy here:

https://brainly.com/question/28523860

#SPJ11

Answer:

4 Fe + 3 O2 → 2 Fe2O3

Explanation:

Left side: 4 Fe, 3 o2=3x2=6 O ==> 4 Fe, 6 O

Right side: 2xFe2= 4 Fe, 2x3 o2 = 6 O ==> 4 Fe, 6 O

Most of the volume of an atom is taken up by the Electron clouds, and most of the mass of an atom is found in the nucleus.

Most of the volume of an atom is taken up by the electron clouds. This is because electrons occupy the space surrounding the nucleus in orbitals and they have a relatively large amount of space between them. The electron clouds represent the region in which electrons are likely to be found at any given time.

Most of the mass of an atom is found in the nucleus. The nucleus is made up of protons and neutrons, which have a much larger mass compared to electrons. Although the nucleus is much smaller in size compared to the electron clouds, it contains almost all of the mass of an atom.

To learn more about atom refer to:

brainly.com/question/30898688

#SPJ4

The mass of a 12.56 L sample of carbon dioxide at STP is approximately 21.94 grams.

To determine the mass of a 12.56 L sample of carbon dioxide, we need to know the pressure and temperature of the gas. This is because the density of a gas, and therefore its mass, depends on these factors.

Assuming standard temperature and pressure (STP), which is 0°C (273.15 K) and 1 atm (101.3 kPa), we can use the ideal gas law to calculate the mass of the carbon dioxide:

PV = nRT

where:

P = pressure = 1 atm

V = volume = 12.56 L

n = number of moles of gas

R = gas constant = 0.08206 L·atm/mol·K

T = temperature = 273.15 K

Solving for n, we get:

n = PV/RT = (1 atm)(12.56 L)/(0.08206 L·atm/mol·K)(273.15 K) = 0.499 mol

The molar mass of carbon dioxide (CO2) is 44.01 g/mol, so the mass of 0.499 mol of CO2 is:

mass = n × molar mass = 0.499 mol × 44.01 g/mol

= 21.94 g

To know more about ideal gas law here

https://brainly.com/question/4147359

#SPJ4

The depth range of the epilimnion in this lake is most likely a. 0 to 3 meters. Option A is correct.

To determine the depth range of the epilimnion, we need to identify the layer of the lake where the temperature change is most rapid, which indicates the transition between the warm surface layer and the colder deep layer.

Looking at the temperature readings, we can see that there is a significant temperature difference between the surface layer (0-3 meters) and the layer below (4-7 meters).

However, the temperature change between 4-7 meters and 8-12 meters is not as dramatic, indicating that the transition between the warm surface layer and the colder deep layer occurs somewhere between 3 and 8 meters.

Hence, A. 0 to 3 is the correct option.

To know more about depth range here

https://brainly.com/question/29103133

#SPJ4

The amount of heat transferred would be -8.85 kJ.

To calculate the heat transferred, we need to first determine the limiting reactant, which is the reactant that is completely consumed in the reaction. This will determine the amount of product that can be formed and hence the amount of heat released.

We start by calculating the moles of sulfur and oxygen:

Moles of sulfur = 0.54 g / 32.06 g/mol = 0.0168 mol

Moles of oxygen = 0.54 g / 31.998 g/mol = 0.0169 mol

The balanced equation shows that 2 moles of sulfur react with 3 moles of oxygen to produce 2 moles of sulfur trioxide. So, the ratio of moles of sulfur to oxygen in the reaction is 2:3. Since the ratio of moles of sulfur to oxygen in the reactants is less than 2:3, oxygen is the limiting reactant.

The amount of sulfur trioxide produced can be calculated using the mole ratio from the balanced equation:

Moles of sulfur trioxide produced = 0.0169 mol * (2 mol SO3 / 3 mol O2) = 0.0112 mol

The heat transferred in the reaction can be calculated using the heat of reaction per mole of sulfur trioxide:

Heat transferred = 0.0112 mol * (-790 kJ/mol) = -8.85 kJ

More on heat transfer can be found here: https://brainly.com/question/13433948

#SPJ1

Answer:

The balanced chemical equation shows that 1 mole of Ca reacts with 2 moles of H2O to produce 1 mole of Ca(OH)2 and 1 mole of H2.

Therefore, to react with 2.0 moles of Ca, we need 2.0 moles of Ca x (2 moles H2O / 1 mole Ca) = 4.0 moles of H2O.

So, 4.0 moles of H2O are needed to exactly react with 2.0 moles of Ca.

Answer:

c

Explanation:

formation is an igneous rock

Substitution reactions can require a catalyst to be feasible. (a). A high temperature should be maintained in order to maximize the percent yield of the substitution reaction.; (b). A high pressure should be used in order to maximize the percent yield of the substitution reaction. ; The HCl gas should not be allowed to escape into another container

The reaction represented by the following equation is heated to maximize the percent yield.  

C2H6(8) + Cl2(g) + energy c HCl(l) + HCI()

a. To maximise the percent yield of the substitution reaction, a high temperature should be maintained. This is because increasing the temperature increases the kinetic energy of the molecules, allowing them to move faster and collide more frequently. This leads to an increased rate of reaction and a higher percent yield.

b. To maximise the percent yield of the substitution reaction, use a high pressure. This is because increasing the pressure increases the concentration of the reactants, which leads to more frequent collisions between the molecules and an increased rate of reaction.

c. Allowing the HCl gas to escape into another container is not permitted. This is because the HCl gas is a product of the reaction and removing it from the reaction vessel will decrease the yield of the reaction. Instead, the HCl gas should be kept in the same container as the reactants in order to maximize the percent yield of the substitution reaction.

For more question on Substitution reactions click on

https://brainly.com/question/10143438

#SPJ11

You would have to wait approximately 3,180 years for 1/5 of the radium to disappear. This is because the half-life of radium is approximately 805.4 years.

Suppose you have a cache of radium, which has a half-life of approximately 1590 years.

To determine how long you would have to wait for 1/5 of the radium to disappear, you need to use the formula for radioactive decay:

A=A₀(1/2)^(t/T)

where:

A₀ = initial amount of radium

A = amount of radium remaining after t years

T = half-life of radium

Firstly, note that 1/5 of the radium has disappeared, meaning that you have 4/5 of the radium remaining.

Therefore, A=4/5 A₀

We want to find t, the time it takes for 1/5 of the radium to disappear. This means that we need to find the time it takes for A to be reduced to 1/5

A₀ (or 2/5 A).2/5 A₀=A₀(1/2)^(t/T)2/5=(1/2)^(t/1590)

Taking the logarithm of both sides, we get:

t/1590=log(2/5)/log(1/2)

Solving for t, we get:

t = 805.4 years

Therefore, you would have to wait approximately 805.4 years for 1/5 of the radium to disappear.

To know more about Half-life please visit :

https://brainly.com/question/18630925

#SPJ11

Explanation:

The balanced equation for the reaction is:

N2 + 3 H2 → 2 NH3

From the equation, we can see that 3 moles of H2 are needed to produce 2 moles of NH3.

Therefore, if 1.14 moles of H2 reacts completely, we can calculate the moles of NH3 produced as follows:

1.14 moles H2 × (2 moles NH3 / 3 moles H2) = 0.76 moles NH3

Therefore, 0.76 moles of NH3 can be produced if 1.14 moles of H2 reacts completely with nitrogen.

Hydrolysis occurs when Fe2O3 is dissolved in water, resulting in the formation of Fe(OH)3 and H+ ions. For every Fe in Fe2O3, there are 1.5 O. Thus, the iron content of Fe2O3 is reduced.

Water in the liquid state serves as the solvent in an aqueous solution. In other words, water molecules surround and integrate solute (dissolved) ions and molecules into their web of bonds. Following that, the dissolved species dispersed all over the water.

Aqueous solutions are made up of water and one or more dissolved materials. Solids, gases, or other liquids can all dissolve in an aqueous solution.

To know more about Hydrolysis visit:-

brainly.com/question/10840252

#SPJ1

Question:

How Many Particles Fe2O3 Will Produce In An Aqueous Solution (In Water).

Answer:

Thermal energy is the sum of the kinetic and potential energy of all the atoms in an object or substance.

(This statement is true for ideal gases, but for solids and liquids, thermal energy also includes the energy associated with intermolecular forces.)

To calculate the growth rate of the wolf pack, we need to find the difference between the birth rate and death rate and divide that by the total wolf population. Therefore, the growth rate of the wolf pack is 0.27%.

The difference between births less deaths and the difference between immigrants and emigrants in a given country, territory, or geographic area at a given year is what is used to describe the annual increase in population size.

Growth rate = (birth rate - death rate) / total population

Birth rate = 15/51 = 0.294

Death rate = 8/51 = 0.157

Total population = 51

Growth rate = (0.294 - 0.157) / 51 = 0.137 / 51 = 0.0027 or 0.27%

To know more about birth rate visit:-

brainly.com/question/626780

#SPJ1

If the pressure contributed by CH4 is 111.2 atm, the pressure due to NH3 would be 109.1 atm.

To solve the problem, we can use the ideal gas law equation:

PV = nRT

where P is pressure, V is volume, n is the number of moles, R is the ideal gas constant, and T is temperature.

We need to find the pressure due to NH3, so let's start by finding the number of moles of each gas:

Now, we can use the pressure contributed by CH4 to find the total pressure:

Ptotal = PCH4 + PNH3

111.2 atm = PCH4 + PNH3

Finally, we can solve for the pressure due to NH3:

Therefore, the pressure due to NH3 is 109.1 atm.

More on pressure can be found here: https://brainly.com/question/12977546

#SPJ1

34.21 g mass (g) of precipitate will be produced if the reaction runs to completion.

The chemical equation for the reaction between sodium chloride and silver nitrate is

[tex]NaCl + AgNO_3[/tex]→[tex]AgCl + NaNO_3[/tex]

The given amount of sodium chloride is 14.0 g

The volume of deionized water added is 200 ml

The volume of silver nitrate is 100 ml

The molarity of silver nitrate is 2.0 M

Let us first calculate the number of moles of silver nitrate that is used:2.0 M = 2.0 mol/L

Number of moles of silver nitrate used = 2.0 mol/L x 100/1000 L= 0.20 mol

Now, we can use mole-to-mole ratios to find the amount of precipitate (AgCl) that will be produced from the given amount of NaCl.

Number of moles of NaCl = 14.0 g / 58.44 g/mol = 0.239 mol

From the balanced chemical equation, we see that 1 mole of NaCl reacts with 1 mole of [tex]AgNO_3[/tex] to produce 1 mole of AgCl

Number of moles of AgCl produced = 0.239 mol

Therefore, the mass of AgCl produced is:

Mass of AgCl = 0.239 mol x 143.32 g/mol = 34.21 g

Hence, the mass of precipitate produced is 34.21 g.

Therefore, the mass of precipitate that will be produced when 14.0 g of sodium chloride is reacted with 100.0 mL of 2.0 M silver nitrate in 200 mL of deionized water is 34.21g.

To know more about Precipitate please visit :

https://brainly.com/question/30344509

#SPJ11

Answer:

Based on the given scenario, Hodah's leadership style can be described as a transactional theory. This theory suggests that leaders provide rewards or punishments based on the performance of their followers. In this case, Hodah has devised a bonus system to motivate the sales team to perform better by providing them with incentives such as gift cards for every new client and pallets of paper sold. This approach focuses on providing rewards to motivate and improve performance.

The density of H2O2 gas at 15 °C and 160. 20 kPa is given by formula PV=nRT is 236.40 g/L.

Density is defined as the mass per unit volume of a material under certain temperature and pressure conditions. The gas's density is equal to its mass divided by its volume. If the density of the gas is known, the molar mass of the material may be calculated. Temperature and pressure affect density.

we have,

Temperature = 15 = 15 + 273 = 288 K

And pressure = 160.2 KPa.

PV = nRT

PV = m/mwt x RT

pxmwt/RT = m/V

we know m/v = density

density = 160.20 x 34 / 0.08 x 288

d = 236.40 g/L

Therefore, density of H2O2 gas is 236.40 g/L.

Learn more about Density:

https://brainly.com/question/20384033

#SPJ4

The allegations are unfounded and perhaps pseudoscientific. Because to the fact that Jewels only come into contact with the skin's surface, they are not extremely beneficial. The ions cannot enter the human body.

In other words, product claims might highlight practical advantages, point out emotional connections, foster trust, or even draw parallels with rival products on the market. These are a few illustrations of various product claims: manufactured using fresh produce and fruits. 100% natural.

We discovered that human skin is permeable to ions such as magnesium, calcium, sulphate, and nitrate in vitro at amounts seen in the atmospheric fallout in two separate polluted regions of Poland.

To know more about ions visit-

https://brainly.com/question/3110170

#SPJ1