as the surface area increases the rate of reaction also increases.
Explanation:
Answer:
A.) The rate is faster.
C.) 28 Seconds
plzzzz help me this is due today. only need help with these two questions and the element is oxygen.
How do protons, neutrons, and electrons differ in terms of their electrical charges and locations within the atom?
Describe the four fundamental forces. Which of these forces are involved in chemical bonding?
Answer: thanks for the point
Explanation:
Which element most likely interacts with water the same way lithium interacts with water?
Answer:
Is there a multiple choice or select all that apply? I would say Potassium (K) or Sodium (Na)
Explanation:
A steel beam is rotated in a horizontal plane to provide the centripetal acceleration for training pilots. If the pilot sits 2.19 m from the center of rotation, at what speed must he rotate in order to experience a horizontal centripetal acceleration of 65.8 m/s/s?
Given :
Pilot sits 2.19 m from the center of rotation.
Horizontal centripetal acceleration is 65.8 m/s².
To Find :
The angular velocity of the pilot .
Solution :
We know, centripetal acceleration is given by :
[tex]a = \omega^2 r\\\\\omega = \sqrt{\dfrac{a }{r}}\\\\\omega = \sqrt{\dfrac{65.8 }{2.19}}\\\\\omega = 5.48\ s^{-1}[/tex]
Hence, this is the required solution.
What is the period of a rotating object if it spins 24 times in 13 seconds?
Answer:
The period is 0.54 seconds
Explanation:
Period (T)
Is the time required for a rotating object to make one complete revolution around a circular path.
If it takes a time t to complete n revolutions, the period is:
[tex]\displaystyle T=\frac{t}{n}[/tex]
The rotating object spins n=24 times in t=13 seconds, thus its period is:
[tex]\displaystyle T=\frac{13}{24}[/tex]
T = 0.54 sec
The period is 0.54 seconds
A transverse and longitudinal wave combine to form what kind of wave?
a sound wave
a radio wave
an electromagentic wave
a surface wave
Diana hangs a lead cylinder with a force of 12 N from a model bridge.
Which vector(s) accurately illustrates the reaction force of the bridge on the lead cylinder?
The action and reaction law allows us to find that the reaction force, the weight of the cylinder, is:
12 N force directed upward
Newton's third law or action and reaction law, establishes that if two bodies interact with each other the force that one applies to the other, is equal in magnitude to the force of the second on the first but in the opposite direction, that is, all forces act in pairs one in each body that interact.
Forces with these characteristics are called action and reaction.
In this case we have a hanging cylinder, with the cylinder it has mass so the weight is 12 N it acts on the table in a downward direction, let's say this is the action force.
In response to this force, the table exerts a force on the cylinder of equal magnitude but in the opposite direction, which is why it is directed upwards.
let's analyze the force diagram
When analyzing the forces shown in the diagram, the forces of equal magnitude to the weight are the first twoThe weight is directed downward, the answer must be directed upward.
In conclusion using theaction and reaction law we find that the answer for reaction force is:
12 N force directed upward
Learn more about the action and reaction law here:
https://brainly.com/question/22746565
Help please! I hope the given possibles help
Answer:
The answer is "[tex]5.184 \times 10^{23}[/tex] kg"
Explanation:
Given:
[tex]g= 6.003 \ \frac{m}{s^2}\\\\G= 6.67 \times 10^{-11} \ \frac{N - m^2}{kg^2}\\\\M=?\\\\radius= 2,400 \ km\\\\[/tex]
Calculating diameter:
[tex]Diameter =radius \times 2[/tex]
[tex]=24\times 10^5 \times 2\\\\=48 \times 10^5 \ m[/tex]
The formula for mass calculation:
[tex]\to g = G \times \frac{M}{(\frac{d^2}{4})}\\\\\to g=G\times \frac{4M}{d^2}\\\\\to 4M= \frac{g \times d^2}{G} \\\\\to M= \frac{g \times d^2}{4G} \\\\[/tex]
[tex]=\frac{6.003 \times (48 \times 10^{5})^2}{4 \times 6.67 \times 10^{-11}}\\\\=\frac{6.003 \times 2,304 \times 10^{10}}{26.68\times 10^{-11}}\\\\=\frac{13,830.912 \times 10^{10}}{26.68\times 10^{-11}}\\\\=518.4 \times 10^{21}\\\\= 5.184 \times 10^{23}\\\\[/tex]
What two processes are part of electromagnetism? A. The production of a magnetic field by an electric current B. The production of a magnetic field by permanent magnets C. The attraction of electric charges for each other D. The production of an electric current by a moving magnet
Two processes, the magnetic field production by electric current and electric current production by moving magnets are part of Electromagnetism.
Electromagnetism:
It is a branch of physics in which scientists study the electromagnetic force. Or in simple words studies the interaction of electric and magnetic field.
This includes the production of magnetic field from the electric current and electric current from moving magnet.
The study of magnetic field of a permanent magnet is part of magnetism while the attraction of electric charges by each other is studied under electrostatics.
Therefore, two processes, the magnetic field production by electric current and electric current production by moving magnets are part of Electromagnetism.
To know more about Electromagnetism:
https://brainly.com/question/13803241
The atomic number tells us the...
Number of protons
Atomic mass
Number of electrons
Number of neutrons
Please help, I'm marking the person with the correct answer Brainliest!
I am giving 20 points!
Answer:
The atomic number tells us the number of protons.
Explanation:
Hope this helps and I hope u have an Amazing day!!
1. A large ocean liner floating in the sea has a volume of
375 000 m² and displaces 50 000 m² of sea water. Determine the
density and mass of the ship. Explain why, despite being made
of metal, the ship is able to float.
Answer:
Density of the ship :133.33 kg/m³
Mass of the ship :50,000,000 kg
Ships are able to float on water because they displace a volume that equals their own weight
Explanation:
The formula for density is ;
Density = Mass/Volume
But the mass of displaced fluid is give by the formula;
m=ρV where ρ is density of the fluid and V is volume of water displaced
Volume of liner= 375000 m³
Volume displaced = 50000 m³
The volume of the water displaced is equal to mass of the liner
I m³ = 1000 kg
50000 m³ = 50000*1000 =50,000,000 kg
50,000,000 kg ----------mass of the ship
So if ;
m= 50,000,000 kg
v= 375000 m³
ρ = m/V
ρ = 50,000,000/375000
ρ = 50,000,000/375000
ρ =133.33 kg/m³
Ships are able to float on water because they displace a volume that equals their own weight. Additionally, the air contained in the spaces of the ship inside is much less dense than density of water aiding in the floating process.
Could somebody please explain the Coriolis effect? Thank you! (also the subject is physical science but that wasn't an option so I just put physics)
Answer:
The Coriolis Effect makes things appear to move in a curve around our planet, like, for example, a plane. This is also due to the fact that our Earth is round, so nothing really moves in a straight line. It is "an effect whereby a mass moving in a rotating system experiences a force (the Coriolis force ) acting perpendicular to the direction of motion and to the axis of rotation."
Explanation:
Jenny puts a book on her desk. Jenny’s book has an area of 200 cm2.It exerts a pressure of 0.05 N/cm2 on the desk. What is the weight of the book? *
A 8.0\,\text {kg}8.0kg8, point, 0, start text, k, g, end text box is released from rest at a height y_0 =0.25\,\text my 0 =0.25my, start subscript, 0, end subscript, equals, 0, point, 25, start text, m, end text on a frictionless ramp. The box slides from the ramp onto a rough horizontal surface. The box slides 2.0\,\text m2.0m2, point, 0, start text, m, end text horizontally until it stops.
Answer:
μ = 0.125
Explanation:
To solve this problem, which is generally asked for the coefficient of friction, we will use the conservation of energy.
Let's start working on the ramp
starting point. Highest point of the ramp
Em₀ = U = m h y
final point. Lower part of the ramp, before entering the rough surface
[tex]Em_{f}[/tex] = K = ½ m v²
as they indicate that there is no friction on the ramp
Em₀ = Em_{f}
m g y = ½ m v²
v = [tex]\sqrt{2gy}[/tex]
we calculate
v = √(2 9.8 0.25)
v = 2.21 m / s
in the rough part we use the relationship between work and kinetic energy
W = ΔK = K_{f} -K₀
as it stops the final kinetic energy is zero
W = -K₀
The work is done by the friction force, which opposes the movement
W = - fr x
friction force has the expression
fr = μ N
let's write Newton's second law for the vertical axis
N-W = 0
N = W = m g
we substitute
-μ m g x = - ½ m v²
μ = [tex]\frac{v^{2} }{2 g x}[/tex]
Let's calculate
μ = [tex]\frac{2.21^{2}}{2\ 9.8\ 2.0}[/tex]
μ = 0.125
A 8.0 kg box is released from rest at a height y0 = 0.25 m on a frictionless ramp. The box slides from the ramp onto a rough horizontal surface. The box slides 2.0 m horizontally until it stops.
What is the friction coefficient of the horizontal surface?
Answer: 0.125
Jake and Amir are both standing on identical skateboards and
perform a physics experiment in which they push off one
another to move. Jake is taller and more massive than Amir. If
Jake pushes with 20 N of force, what force would he feel
backwards away from Amir? F= N
Answer: 20
Explanation:
If Jake pushes with 20 N of force, the force that he would feel backwards away from Amir is 20N
Force simply means the strength or energy that can later the position of an object. Force can also be described as a push or pull.
It should be noted that since Jake pushes with 20 N of force, the force that he would feel backwards away from Amir will be the exact force that was used in pushing.
This will therefore be 20 Newton as well.
Read related link on:
https://brainly.com/question/18038995
Students are asked to design an experiment about Newton’s 2nd Law. One student decides to roll a marble down a ramp into a pile of sand to measure the force impact.
Which variable should she manipulate to best exemplify the relationship explained by this law?
A.She should use a heavier marble, because the marbles will roll at the same rate of acceleration but more mass will produce a larger impact force.
B.She should increase the slope of the ramp by propping it up to higher height, because a steeper ramp will cause a greater rate of acceleration and a larger impact force.
C.She should use a heavier marble, because a bigger marble will accelerate more quickly down the ramp and cause a greater impact force.
D.She should decrease the slope of the ramp, because a ramp with a smaller slope will allow the ball more time to build up speed and cause a greater impact force.
Answer:
A
Explanation:
Trust me I just took it !
Please help! Will mark brainliest!
Answer:
im pretty sure its d
Explanation:
How do we obtain data about the properties of exoplanets and objects in our solar system?
Answer:
Doppler effect to analyze the motion and properties of the star and planet.
Explanation:
The radial velocity method invovles watching the spectral lines of a star as a planet orbits around the star. Because of the planets gravitational pull on the star, will wobble. This causes Doppler shifts in the spectral lines, allowing astronomers to infer the presence of the planets.
A car of mass 1500 kg starting from rest can reach a speed of 20
m/s within 10 seconds. Calculate the accelerating force of the car
engine.
Explanation:
F=MA
F=1500 * 2
F=3000N
Do machines create less work? Example: pulley system
Answer:
Technically, no the work of building machines is hard but in the long run, Yes they are easier after they're built.
Explanation:
A box is sitting stationary on a long level ramp on level ground. The coefficient of static friction is (1.0). One end of the ramp is slowly lifted higher and higher. What is the angle of the ramp with respect to the ground when the box begins slidig?
Answer:
45 degrees
Explanation:
Given that the coefficient of friction, [tex]\mu=1.0[/tex]
Let the angle of the ramp be [tex]\theta[/tex].
The gravitational force acting downward [tex]=mg[/tex]
The normal reaction by the ramp on the box, [tex]N=mg\cos\theta[/tex]
So, the maximum frictional force that can act on the box, [tex]f= \mu N[/tex]
The force along with the plane in the direction of sliding, [tex]F = mg\sin\theta[/tex]
When the box begins sliding, the F must have to overcome the frictional force,f.
So, F=f
[tex]mg\sin\theta=\mu N \\\\mg\sin\theta=\mu mg\cos\theta \\\\\frac {\sin\theta}{\cos\theta}=\mu \\\\\tan\theta=\mu \\\\\theta=\tan^{-1}\mu \\\\[/tex]
Putting the value of \mu, we have
[tex]\theta=\tan^{-1}1[/tex]
[tex]\theta=45[/tex] degrees.
Hence, the angle of the ramp with respect to the ground when the box begins sliding is 45 degrees.
Kylie has a mass of 54 kg and is jogging at a velocity of 3 m/s what is Kylie’s kinetic energy?
A car travels 14 km due west, then does a
U-turn, and travels 43 km due west.
I. What total distance has the car
traveled?
II.
What is the total displacement of the
car?
III. If the entire trip took 3.20 hours.
determine the average speed of the
car. Give
your answer in both
km hour, and m s. (show
conversion)
IV. If the entire trip took 2.50 hours.
determine the average velocity of
the car. Give your answer in both
km h, and mph (show conversion)
Explanation:
It is given that,
A car travels 14 km due west, then does a U-turn and travels 43 km due east (when it takes U-turn, it will change direction from west to east)
i. Total distance = total path covered
= 14 km + 43 km
= 57 km
ii. Let east is positive and west is negative.
Displacement = final position-initial position
= 43-14
= 29 km
iii. If time taken in the entire trip = 3.2 hours
Average speed = distance/time
[tex]s=\dfrac{57\ km}{3.2\ h}\\\\=17.81\ km/h[/tex]
1 km/h = 0.2777 m/s
17.81 km/h = 4.94 m/s
iv. If time taken in the entire trip = 2.5 hours
Average velocity = displacement/time
[tex]v=\dfrac{29\ km}{2.5\ h}\\\\=11.6\ km/h[/tex]
1 km/h = 0.621 mph
11.6 km/h = 7.2 mph
Henc, this is the required solution.
The most important characteristic in designing the soundproof room is to create walls that
Answer:
make sound bounce off walls
Answer:
Explanation:
Walls that absorb the sound and dont just bounce or reflect the sound straight back. Like how video makers have foam walls with ridges on their walls.
Help!! Or I get an F!!!
What planet could you jump the highest?
Answer:
Is Mercury an answer on your thing?
Explanation:
Mercury has the least amount of gravity, so therefore you can jump the highest on Mercury.
Answer:
Jupiter
Explanation:
Jupiter has more than 300 time the mass as earth. so, it's gravitational pull is stronger.
Hopefully this helps
If you are trying to hit a baseball as far as possible, you would want to:
apply a small force over a short time
apply a small force over a long time
apply a large force over a short time
apply a large force over a long time
How does a salt differ from an acid or base?
Answer:
An acid is defined as a substance whose water solution tastes sour, turns blue litmus red and neutralizes bases. A substance is called base if its aqueous solution tastes bitter, turns red litmus blue or neutralizes acids. Salt is a neutral substance whose aqueous solution does not affect litmus
The radius of the planet Mercury is 2.43 x 10^6m and its mass
is 3.2 x 10^23 kg. What is the speed of a satellite in orbit
265.000 m above the surface?
[tex]\huge\boxed{Option D}[/tex]
_____________________________________DATA:Radius of Mercury = [tex]R_m[/tex] = [tex]2.43x10^6m[/tex]
Mass of Mercury = [tex]M_m = 3.2x10^{23}m[/tex]
Distance Satellite above the surface of the Mercury = d = 265,000m
Gravitational Constant = [tex]G = 6.67x10^{-11} \frac{N.m^2}{kg^2}[/tex]
_____________________________________SOLUTION:Since the Satellite is orbiting around the Planet Mercury, due to the centripetal force, and Centripetal force is the force that acts towards the center of the circle, Whereas The gravitational force also acts towards the center of the circle thus we can say that Centripetal force is equal or same as centripetal force. So,
[tex]F_g =F_C[/tex]
Fg is Given by,
[tex]F_g = \frac{GM_MM_S}{r^2}[/tex]
Fc is Given by,
[tex]F_c=\frac{M_SV^2}{r}[/tex]
Where,
G is Gravitational Constant
[tex]M_e[/tex] is mass of Planet Mercury
[tex]M_S[/tex] is Mass of Satellite
r(small letter) is the distance between the center of the Planet Mercury and the satellite.
V is velocity of satellite
_____________________________________Now,
[tex]\frac{GM_MM_S}{r^2} =\frac{M_SV^2}{r}[/tex]
[tex]V = \sqrt\frac{GM_M}{r}[/tex]
r can also be written as,
[tex]V = \sqrt\frac{GM_M}{R_M +d}[/tex]
Substitute the variables,
[tex]V = \sqrt{\frac{(6.67x10^{-11})x(3.2x10^{23})}{2695000}[/tex]
Simplify the equation,
V = 2814 [tex]\frac{m}{s}[/tex]
Approximately,
V = 2800 [tex]\frac{m}{s}[/tex]
_____________________________________Best Regards,'Borz'A computational model predicts the maximum kinetic energy a roller coaster car can have given its mass, the speed at the highest point of its journey, and the height of the highest point. The mass is 250 kg, and the highest point of the journey is at 30m, where the cart is at rest. What is the maximum kinetic energy?
A. 113500 J
B. 468750 J
C. 0 J
D. 73500 J
Answer:
D
Explanation:
The decrease in potential energy is equal to the increase in kinetic energy.
mgh
250 x 9.8 x 30
=73, 500
Answer:
73,500 J
Explanation:
100% Correct
Question 4 of 10
Which option is a good blackbody radiator?
O A. A lightbulb
O B. A balloon
O C. A person
O D. A mirror
SUBM
Answer:
A lightbulb
Explanation:
Answer:
Lightbulb
Explanation: got it right
What is a material that can dissolve in another material called?
Slippery
Physical
Soluble
Insoluble
Answer:A material that can dissolve in another material called Soluble
Explanation:
Answer:
Option 3.
Soluble is the correct/best answer choice.