According to this passage what can we calculate about cleavage 
Passage in photo and answers in photo !

In order to arrange candidates for recruiting and recruitment purposes, businesses use applicant tracking systems (ATS).

The complete question is,

What do ATSs serve as their primary function?

To learn more about applicant tracking systems (ATS) refer to:

https://brainly.com/question/28436701

#SPJ1

Calculating Standard Product ATS, The allocation, presale backorder allocation, turnover, and (optional) on order quantity are added together to form the ATS.

Calculating Standard Product ATS, The allocation, presale backorder allocation, turnover, and (optional) on order quantity are added together to form the ATS. It's equal to the quantity of a product that is reserved for sale by default (the allocation value).

Repeating measurements is the best technique to determine the degree of uncertainty surrounding a set of data.

Mixture ~2 g

T2g = 64.7 ± 0.3°C

Cot 2g 6 e g o

Since all the electrons in t 2g are coupled up, the ligand must have a strong field, and that ligand is oxalate (C 2 O 4).

2−

[Co(C 2 O 4 ) 3] is the name of the substance.

3+

To learn more about Repeating measurements  refer to:

https://brainly.com/question/13494428

#SPJ1

first increase, then decrease When A is added, some B will be produced, so its concentration will rise. As D is produced and begins to inhibit E1, the rate of production of B will fall.

Since E2 causes C to be produced from B, the concentration of B will then fall.The concentration of intermediate product b will first increase as it is produced by enzyme e1, but it will eventually decrease as product d accumulates and inhibits enzyme e1, slowing down the production of intermediate b.sequence of enzymatically catalyzed reactions converts substrate a to final product d through a sequence of reactions involving the production of intermediate products b and c as shown. product d inhibits enzyme e1. if the enzymes e1-e3 are all present in a test tube and substrate a is added to the reaction mixture,e1 e2 e3 a b c d first increase, then decrease increase to a fixed value increase to the concentration of a added oscillate between zero and the concentration of a added remain at zero.

learn more about product  here:

https://brainly.com/question/22852400

#SPJ4

When equal volume and concentration of NaCl solutions, held at different temperatures, are combined in a larger flask, the final solution will have the following characteristics:

In summary, the combination of equal volume and concentration of NaCl solutions, held at different temperatures, in a larger flask will result in a solution with the same NaCl concentration but a temperature that is determined by the initial temperature and heat capacities of the solutions.

Learn more about NaCl solutions here:

https://brainly.com/question/28123588

The complete question is:

What will happen when equal volume and concentration of NaCl solutions, held at different temperatures, are combined in a larger flask?

#SPJ4

A clear and precise depiction of the reactants and products is required for a comprehensive arrow-pushing mechanism.The reaction between H3C-H and CH3CH2OH occurs under acid-catalyzed .

conditions as follows: The acid catalyst, such as H2SO4, transfers a proton (H+) to the alcohol molecule's oxygen atom.resulting in the formation of a hydroxyl ion (CH3CH2O-). This hydroxyl ion is nucleophilic and attacks the alkane molecule's electrophilic carbon atom, generating a tetrahedral intermediate. As the intermediate forms, a link between the carbon atom and the proton is broken, resulting in the formation of a carbocation (H3C+). The link between the oxygen atom and the hydroxyl ion is also broken, resulting in the formation of a water molecule (H2O) and a new alcohol molecule (CH3CH2OH). The electron-rich oxygen atom stabilizes the carbocation, and the reaction is completed with the production of a new carbon-oxygen bond, yielding the result molecule CH3C-O-CH3. Under acid-catalyzed conditions, the overall arrow-pushing mechanism for this reaction is (Protonated alcohol) -> H3C+ + CH3CH2O- (Carbocation intermediate) -> CH3C-O-CH3 + H2O (Product).

learn more about proton  here:

https://brainly.com/question/1252435

#SPJ4

The synthesis of proteins machinery detects the tRNA anticodon, thus based on the findings of the Benzer experiment, protein would also have valines wherever glycines ordinarily are.

C5H11NO2, a crystallized essential amino acid, is a component of both vegetable and animal proteins. Your body uses branched-chain amino acids to help create energy. Valine is mostly present in protein-rich foods such meat, fish, soy, as well as dairy.

A sectioned amino acid called valine is made up of the amino acid glycine with the hydrogen linked to the alpha-carbon replaced by an isopropyl compound. It functions as a plant molecule and a metabolite for Daphnia magna.

To know more about valine visit:

https://brainly.com/question/11005856

#SPJ4

The maximum electron capacity at energy level 1 is 2. The maximum electron capacity at energy level 2 is 8. Maximum electron capacity at energy level 3 is 18. The maximum number of electrons at energy level 4 is 32.

Having a negative electric charge, an electron is a subatomic particle. Together with protons and neutrons, it is one of the basic building blocks of atoms.

The chemical characteristics of elements are determined by electrons, which are found in the valence shell, the outermost shell of an atom. In addition, they have a role in the production of magnetism, electrical conduction, and chemical processes. Additionally, as in an electron beam, electrons can also exist freely and independently.

To know more about electron, visit:

brainly.com/question/1255220

#SPJ4

In chemistry, a nucleophilic substitution is a class of chemical reactions in which an electron-rich chemical species (known as a nucleophile) .

show the movement of electrons in the following step of the reaction mechanism?

To learn more about mechanism refers to:

https://brainly.com/question/24509399

#SPJ4

Taking into account the reaction stoichiometry, a mass of 14.86 grams of H₂ is needed to produce 84.2 grams of ammonia.

The balanced reaction is:

N₂ + 3 H₂ → 2 NH₃

By reaction stoichiometry, the following amounts of moles of each compound participate in the reaction:

The molar mass of the compounds is:

By reaction stoichiometry, the following mass quantities of each compound participate in the reaction:

The following rule of three can be applied: If by reaction stoichiometry 34 grams of NH₃ are produced by 6 grams of H₂, 84.2 grams of NH₃ are produced by how much mass of H₂?

mass of H₂= (84.2 grams of NH₃× 6 grams of H₂)÷ 34 grams of NH₃

mass of H₂= 14.86 grams

Finally, 14.86 grams of H₂ are needed.

Learn more about the reaction stoichiometry:

brainly.com/question/24741074

brainly.com/question/24653699

#SPJ1

Density of the given sample is 12.66 grams per milliliter.

Mass per unit volume is the definition of a material's density. The degree to which matter is packed together is fundamentally measured by density. It is a particular physical characteristic of a specific thing.

Density = mass/volume

Given mass = 50g

Given Volume = 3.95mL

According to question, we are required to find the density in units : grams per milliliter

Since the given values for mass and volume are grams and milliliters respectively, no change in units is required.

Putting the given values in the formula, Density = mass/volume

Density = 50/3.95

Density = 12.658 grams per milliliter

We can say, Density = 12.66 grams per milliliter

To know more about density, click here : https://brainly.com/question/6838128

#SPJ4

Answer :a chemical reaction in which a more reactive element displaces a less reactive element from its compound

Explanation:

Displacement reaction is a chemical reaction in which a more reactive element displaces a less reactive element from its compound. Both metals and non-metals take part in displacement reactions. Example : Reaction of iron nails with copper sulphate solution.

Answer:

Chemical reactions known as displacement reactions occur when a more reactive element removes a less reactive element from a molecule.

Answer:

4.98x10^-3 

Explanation:

Magnesium was 5.0g before heating.

Go through the given link below to know more about magnesium:-

https://brainly.com/question/5759562

#SPJ4

When the Hydrogen sulfide decomposes according , the equilibrium concentration of H₂ is 0.0019 mol/L.

Given that :

Numbers of moles of H₂S = 0.49 moles

The Volume = 3.0 L

The Equilibrium constant = 9.30 × 10⁻⁸

The reaction is given as :

2H₂S    ⇄   2H₂(g)  +  S₂(g)

Initial concentration = 0.49 / 3

                                  = 0.16 mol

                     2H₂S    ⇄             2H₂(g)  +         S₂(g)

Initial         0.9166                           0                           0

Change       -2 x                               +2 x                      + x

Equilibrium   (0.16 - 2x)                   2x                         x

kc  = [H₂]²[S₂]² / [H₂S]²

9.30 × 10⁻⁸ = (2x)²(x²) / ( 0.16 - 2x)²

x = 9.5 × 10⁻⁴

The equilibrium concentration for H₂ = 2x

                                                              = 2 ×  9.5 × 10⁻⁴

                                                              = 0.0019 mol/L

To learn more about equilibrium concentration here

https://brainly.com/question/14785440

#SPJ4

If you analyze a carbon sample and discover that 6% of the carbon atoms have an atomic number greater than 12, you may safely assume that 6% of the sample is made up of carbon isotopes.

Carbon-12 (12 C), which has six neutrons in addition to its six protons, is by far the most common isotope of carbon. The following-heaviest isotope of carbon, carbon-13 (13 C), has seven neutrons. They are both referred to as stable isotopes since neither 12 C nor 13 C experience radioactive decay over time. The nuclear charge number (sign Z) of an atomic nucleus is the chemical element's atomic number. The proton number in regular nuclei is equivalent to this (np).

Learn more about atomic number here

https://brainly.com/question/16858932

#SPJ4

Based on these characteristics, amino acids can be categorized Asparagine (Asn), Glutamine (Gln), Serine (Ser), Threonine (Thr), and Tyrosine are polar, neutral amino acids (Tyr).

Alanine, Leucine, Isoleucine, Proline, Phenylalanine, Methionine, and Valine are among the hydrophobic amino acids (Val) Histidine (His), Arginine (Arg), and Lysine are amino acids with positive charges (Lys) Amino acids with negative charges include glutamic acid and aspartic acid (Asp) (Glu) It's critical to note that these categories are generalizations and that an amino acid's actual behavior might depend on its surroundings and interactions with other molecules.Based on these characteristics, amino acids can be categorized Asparagine (Asn), Glutamine (Gln), Serine (Ser), Threonine (Thr), and Tyrosine are polar, neutral amino acids (Tyr). It's critical to note that these categories are generalizations and that an amino acid's actual behavior might depend on its surroundings and interactions with other molecules.

learn more about  amino acids   here:

https://brainly.com/question/14583479

#SPJ4

A gas sample consisting of 2.0 moles of hydrogen and 1.0 mole of oxygen is collected over water at 29ºC and 75 kPa. 48 kPa is the partial pressure of the hydrogen in this sample. Therefore, option B is correct.

The term partial pressure is defined as the pressure that a gas, in a mixture of gases, would exert if it alone occupied the whole volume occupied by the mixture.

Total number of mole = 2 + 1

= 3 moles

Temperature = 29ºC

Total pressure = 75 kPa

partial pressure = mole fraction x total pressure

P V = n R T

= 48 kPa

The partial pressure of the hydrogen is 48 kPa

Thus, option B is correct.

To learn more about the partial pressure, follow the link;

https://brainly.com/question/13199169

#SPJ1

Your question is incomplete, most probably your question was

A gas sample consisting of 2.0 moles of hydrogen and 1.0 mole of oxygen is collected over water at 29ºC and 75 kPa. What is the partial pressure of the hydrogen in the sample?

A) 24 kPa

B) 48 kPa

C) 72 kPa

D) 75 kPa

The percent mass per mass concentration of the solution is  6.80 % (m/m).

We have to note that there are several units of concentration that we are going to have in the chemistry. One of the most common of the units of concentration is the percent concentration. We could look at the percent concentration in three ways;

Percent mass per mass(%m/m)

Percent volume per volume (%v/v)

Percent mass per volume (%m/v)

To convert from percent mass per volume to percent mass per mass, we convert by the density of the solution. In this case, the density of the solution is 1.2 g/mL

We then have;

% m/m = 5.67 % (m/v) * 1.2 g/mL = 6.80 % (m/m)

Learn more about percent concentration:https://brainly.com/question/12860532

#SPJ1

The underwater mountain range that is shown in the image is the Mid-Atlantic Ridge. This range runs down the center of the Atlantic Ocean, and is a part of the global mid-ocean ridge system.

The Mid-Atlantic Ridge is a divergent plate boundary, which means that it is an area where two tectonic plates are moving away from each other. As the plates move apart, magma from the Earth's mantle rises to the surface and cools, forming new crust. This process of seafloor spreading is what creates the underwater mountain range.

One possible explanation for the location of the Mid-Atlantic Ridge in the middle of the ocean is that it is a response to the convective motion of the Earth's mantle. The mantle is made up of hot, dense rock that is constantly moving around.

Another possible explanation is that the Mid-Atlantic Ridge is the result of past tectonic activity. The Atlantic Ocean was formed by the separation of the supercontinent Pangea into two parts, Laurasia and Gondwana. The ridge is a remnant of the rift that separated these two supercontinents.

In all, the Mid-Atlantic Ridge is a fascinating feature that provides important information about the Earth's geology and tectonic activity. Its location in the middle of the ocean is a reminder of the dynamic nature of our planet, and the ongoing process of seafloor spreading that is constantly shaping the Earth's surface.

Learn more about topography from

https://brainly.com/question/24146311

#SPJ1

Matter has evolved from the four elements to the new understanding of the quantum dimensions of matter.

Our understanding of matter has changed significantly over time. In ancient times, matter was thought to be made up of four elements: earth, air, fire, and water. The Greek philosopher Aristotle proposed a system of matter in which everything was made up of combinations of these four elements.

More recently, scientists have been studying the properties of dark matter and dark energy, which are thought to make up most of the universe, but are not yet well understood.

Overall, our understanding of matter has evolved from the ancient belief in four elements, to the modern understanding that matter is made up of atoms, which are made up of smaller subatomic particles and are affected by particle fields and quantum mechanics.

Learn more about matter:https://brainly.com/question/13962030

#SPJ1

SiI4 + 2Mg → Si + 2MgI2  is the the answer/solution to this problem SiI4 + Mg which expresses its balanced equation.

Silicon is described as a chemical element with the symbol Si and atomic number 14. It is a hard, brittle crystalline solid with a blue-grey metallic luster, and is a tetravalent metalloid and semiconductor.

There are four rules to balance a chemical equation and it is shown below:

Learn more about chemical equation at: https://brainly.com/question/29886207

#SPJ1

The induced-fit hypothesis of enzyme-substrate interaction illustrates that there is a conformational change in the active site of the enzyme when a substrate binds to it.

According to the induced-fit model, a substrate attaches to an active site, and the two of them slightly alter their shapes to form the perfect fit for catalysis. By bringing substrates together in the best possible orientation, enzymes encourage chemical reactions by establishing the perfect chemistry for the reaction to take place. According to the induced fit hypothesis, an enzyme's active site is not architecturally ideal for substrate binding while it is in the unbound state, or when it is not binding to a substrate. Refer to the image attached for the cartoon illustration.

This induced fit theory extends the lock-and-key idea proposed 100 years ago. In addition to explaining regulatory and cooperative effects, the new theory put out by D. E. Koshland, Jr. in 1958 also provides some new specificity notions. This theory states that an enzyme's unbound active region is not structurally suitable for substrate binding (i.e., not bound to the substrate).

To know more about induced fit theory, refer:

https://brainly.com/question/27548378

#SPJ4

Density of a block of aluminum occupies a volume of 10mL and has a mass of 40 g is 4g/ml.

Define density.

A material's density is determined by how closely it is packed. As the mass per unit volume, it has that definition. The relationship between density and volume and mass is inverse.

The density rises if the volume remains constant while the amount of matter increases. Density drops when volume grows without accompanying increases in mass. When a substance is heated, the molecules move faster and slightly farther apart, taking up more space and causing the density to drop. When something is cooled, the molecules slow down and get a little closer together, taking up less space and becoming denser.

D = M/V

Mass, M is 40 g.

Volume, V of 10mL

Density, D will be 40/10 i.e. 4g/ml.

To learn more about density use link below:

https://brainly.com/question/26364788

#SPJ1

It can withstand high salt concentrations by using suitable solutes including potassium chloride for minimizing osmotic stress. It has many active transporters to keep potassium levels balanced and extremely acidic proteins to keep protein precipitation at bay.

Halobacterium salinarum also called as Halobacterium cutirubrum and Halobacterium halobium is a marine obligate aerobic archaeon that is exceptionally halophilic. Despite its common name, this was not a bacterium, but rather a component of the Archaea domain. Salted fish, skins, hypersaline lakes, and even salterns contain it.

sanitarium to pump large amounts of salt into its cell, but at the same time it can be a potentially lethal threat; if they are exposed to low molarity water, osmosis causes water to flood the cell causing the membrane to lyse or burst.

To know more about Halobacterium salinarum

https://brainly.com/question/28537339

#SPJ4

Forensic science is described as the application of science to law. 2. The fictitious adventures of Sherlock Holmes piqued the interest of a younger group of forensic scientists as well as criminal detectives.

Forensic science was an important component of the criminal justice system. Forensic scientists study and analyze evidence collected from crime scenes as well as other locations to produce objective results that can aid in the investigation as well as prosecution of criminal criminals or clear an innocent person of such suspicion.

DNA testing as well as analysis is now regarded as the most reliable of any and all forensic tools. Unlike lot of people of the others assembled to address the requirements of law enforcement, it was subjected to rigorous scientific experimentation as well as validation before being used in forensic science.

To know more about Forensic science

https://brainly.com/question/29773304

#SPJ4

Smaller numbers mean less risk of losing, but  less chance of gain, Volatility.

to learn more about gain from the given link:

https://brainly.com/question/28891489

#SPJ1

Formula for lead nitrate with potassium iodide

Pb ( NO 3 ) 2 ( l ) ( l ) KI plus lead nitrate ( s ) Iodide of potassium (PbI 2). ( s ) KNO + Lead Iodide = ( l ) nitrate of potash.

Blood pressure is lowered, platelet aggregation is inhibited, and vessels are protected thanks to nitrate, which performs physiological actions comparable to those of NO [3, 37].

Why Nitrates Should Be Avoided. Stomach acid cannot degrade nitrates on its own. Rather, your gut biome may convert nitrate to nitrite, which may result in health issues like a higher risk of cancer. An inorganic, liquid chemical is nitrate.

To know more about nitate visit:

https://brainly.com/question/5346392

#SPJ4

Answer:

21

Explanation:

........................

Answer: 21

Explanation:

1.81 moles are in 500 grams of BeCr2O7.

Molar mass of BeCr2O7 = 276.095 g/mol

500 g / 276.095 g/mol = 1.81 moles

What is moles?

Moles is a unit used to measure the amount of a substance. It is defined as the amount of a substance that contains the same number of atoms, molecules, ions, or electrons as the number of atoms in 12 grams of carbon-12 (C-12). This means that one mole of any substance will contain the same number of atoms, molecules, ions, or electrons as one mole of C-12. Moles are used in chemistry to measure the quantity of a substance. For example, when a chemist mixes two solutions together, they can use moles to calculate the amount of each substance that was mixed.

Therefore,  1.81 moles are in 500 grams of BeCr2O7.

To learn more about moles

Here: https://brainly.com/question/15356425

#SPJ1