A major league pitcher can throw a baseball an excess of
explain an experiment of the phenomenon of rainfall
Unclear/incomplete question. However, I inferred you need an explanation of the phenomenon of rainfall.
Explanation:
Basically, the phenomenon of rainfall follows a natural cycle called the water cycle. What we call 'rainfall' occurs when water condensed (in liquid form) in the atmosphere is made to fall down on the ground as tiny droplets as a result of the forces of gravity.
The water cycle makes rainfall possible:
First, water on the earth's surface is evaporated (or is absorbed into) the atmosphere.Next, it then condensed into liquid form; which later falls to the surface to the ground again. And the process continues.A bowling ball is 21.6 cm in diameter. What is the angular speed of these ball whenit is moving at 3.0 m/s?
Answer:
Angular speed = 27.78 rad/s (Approx)
Explanation:
Given:
Diameter = 21.6 cm
Speed = 3 m/s
Find:
Angular speed
Computation:
Radius = 21.6 / 2 = 10.8 cm = 0.108 m
Angular speed = v / r
Angular speed = 3 / 0.108
Angular speed = 27.78 rad/s (Approx)
A plumber applies a torque of 408 to a bolt using a wrench. If he moves his hand twice as far
away on the wrench's handle from the bolt (doubling the radius), but applies the same force
as before, how much torque will he now apply?
Answer:
816
Explanation:
We must remember that torque is defined as the product of a force by a distance.
This distance is measured from the pivot point of the Bolt to the point where the force is applied. in this way, we have the following equation to be able to determine the torque.
[tex]T=F*d[/tex]
Now if we double the turning distance we have the torque should also be double.
[tex]T =F*2*d[/tex]
Calculate the mechanical advantage of a ramp if the box you are trying to move has a mass of 10 kilograms, the
board is 15 feet long and the height of the ramp is 5 feet .
3
300
150
45
Answer:
[tex]MA = 3[/tex]
Explanation:
Given
[tex]Box = 10kg[/tex]
[tex]Ramp\ Height = 5ft[/tex]
[tex]Ramp\ Length = 15ft[/tex]
Required
Determine the mechanical advantage
This is calculated as follows:
[tex]MA = \frac{Ramp\ Length}{Ramp\ Height}[/tex]
[tex]MA = \frac{15ft}{5ft}[/tex]
[tex]MA = 3[/tex]
Hence, the mechanical advantage is 3
A radioactive nuclide of atomic number Z emits an alpha particle and the daughter nucleus then emits a beta particle. What is the atomic number of resulting nuclide?
A) Z-1
B) Z+1
C) Z-2
D) Z-3
Answer:
A) Z-1
Explanation:
when a radioactive element of atomic number Z emits an alpha particle, the mass of the new nucleus decreases by 2, i.e the new atomic number of the element = ( Z- 2).
Also, when the daughter nucleus emits a beta particle, the new nucleus increases by 1, that is the new atomic number of the element = (Z + 1).
Thus, the atomic number of resulting nuclide = Z ( - 2) + ( + 1).
= Z - 2 + 1
= Z - 1
Therefore, the atomic number of resulting nuclide is Z - 1
PLEASE HELP :(
I WILL GIVE EXTRA POINTS
1. When is the kinetic energy of an electron transformed into potential energy?
when it interacts with other electrons, decreasing its speed
when it interacts with neutrons without changing its speed
when it interacts with neutrons , increasing its speed
when it interacts with other electrons without changing its speed
2. Atoms bond to form molecules. Which structures or regions of the atoms interact in bonds ?
electric fields of particles with positive charge
electric fields of particles with no charge
electric fields of particles with negative charge
electric fields of particles with opposite charges
3. If two electrons that are apart get pushed toward each other, how does the repulsion between them change?
Initial repulsion is low and decreases as they approach .
Initial repulsion is high and decreases as they approach .
Initial repulsion is high and increases as they approach .
Initial repulsion is low and increases as they approach .
4. A positive charge of 5.0x10 ^ -5 C °is 0.040 m from a second positive charge of 2.0x10 ^ -6 C Calculate the force between the charges.
5.6x10^2 N
5.6x10^2 N
1.4X10^-2 N
2.3X10^1 N
(a) When the kinetic energy of an electron is transformed into potential energy is when it interacts with other electrons, decreasing its speed.
(b) The region of atoms that interact in bonds is electric fields of particles with negative charge.
(c) Initial repulsion is low and increases as they approach.
(d) The force between the charges is 562.5 N.
Kinetic theory of matter
This theory states that, the collision of particles (electrons) of matter is perfectly elastic. This implies that as the particles (electrons) collides with one another, kinetic energy is transferred from one electron to another.
ΔK.E = ΔP.E
Change in kinetic energy is equal to change in potential energy of the electrons.
Thus, when the kinetic energy of an electron is transformed into potential energy is when it interacts with other electrons, decreasing its speed. Decrease in speed implies decrease in kinetic energy and increase in potential energy.
Chemical bonds of moleculesChemical bond is formed from the transfer or sharing of electrons between atoms. (electrons between atoms implies negative charge to negative charge)
Thus, the region of atoms that interact in bonds is electric fields of particles with negative charge.
Coulomb's law
This law states that the force of attraction or repulsion between two charges is directly proportional to the product of the charges and inversely proportional to the distance between the charges.
[tex]F = \frac{kq_1q_2}{r^2}[/tex]
When the distance between the electrons are large, the repulsive force is low and the distance is small, the repulsive force is high.
Force between the chargesThe force between the charges is determined by applying Coulomb's law,
[tex]F = \frac{kq_1q_2}{r^2} \\\\F = \frac{9\times 10^9\times (5 \times 10^{-5}) \times (2\times 10^{-6})}{0.04^2} \\\\F = 562.5 \ N[/tex]
Learn more about Coulomb's law here: https://brainly.com/question/24743340
A 2150 kg car, moving east at 10.0 m/s, collides and joins with a 3250 kg car. The cars move east together at 5.22 m/s. What is the 3250 kg car’s initial velocity calculated to the nearest tenth? Record your answer in the boxes below. Be sure to use the correct place value.
Answer:
2.1 m/s
Explanation:
According to law of conservation of momentum;
m1u1 + m2u2 = (m1+m2)v
m1 and m2 are the masses
u1 and u2 are the initial velocities
v is the common velocity
Given
m1 = 2150kg
m2 = 3250kg
u1 = 10.0m/s
u2 = ?
v = 5.22m/s
Substitute and get u2
2150(10) + 3250u2 = (2150+3250)5.22
21,500 + 3250u2 = 5400(5.22)
3250u2 = 28,188 - 21500
3250u2 = 6688
u2 = 6688/3250
u2 = 2.1 m/s
Hence the 3250 kg car’s initial velocity has an initial velocity of 2.1 m/s
What happens to the molecules of water when it moves from a liquid to a gas?
A. Water molecules condense and move slower.
B. Water molecules spread out and move slower.
C. Water molecules spread out and move faster.
D. Water molecules condense and move faster.
its A or D but im not sure which one ik it moves fast
Marie walks to the store, 10 blocks east of home. She returns home for lunch and then goes back to the school in 1.5 hours. What is her displacement? What is her speed?
The speed and displacement are 6.66 m/s and 10 blocks east, respectively. The total distance traveled is larger than the displacement between those two points if an object changes direction while traveling.
Displacement: Is it a distance?
Sometimes people mistakenly believe that distance and displacement are simply two different labels for the same thing. Displacement and distance, however, are two distinct ideas. The overall distance traveled by an object during its voyage will be larger than the displacement if it changes direction.
What does displacement mean in one sentence?
The smallest (straight line) distance between a body's initial location and its final position—represented by an arrow pointing from the starting position to the final position—is referred to as a body's displacement when it moves from one position to another.
Briefing:
speed=10/1.5
=6.66m/s
displacement=10 block toward east.
To know more about displacement visit:
https://brainly.com/question/11934397
#SPJ1
The decibel scale intensity for busy traffic is 80 dB. Two people having a loud conversation have a decibel intensity of 70 dB. What is the approximate combined sound intensity?
Given :
The decibel scale intensity for busy traffic is 80 dB.
Two people having a loud conversation have a decibel intensity of 70 dB.
To Find :
The approximate combined sound intensity.
Solution :
We know, intensity in decibel can be converted to W/m² by :
[tex]\beta(dB) = 10\ log_{10}( \dfrac{I}{I_o})[/tex]
Putting intensity in decibel scale, we get :
[tex]I(80\ dB ) =10^{-4}\ W/m^2\\\\I(70\ dB ) = 10^{-5}\ W/m^2[/tex]
Let, combine intensity is I .
I = I(80 dB) + I(70 dB)
[tex]I = 10^{-4} + 10^{-5} \ W/m^2\\\\I = 1.1 \times 10^{-4} \ W/m^2[/tex]
Therefore, the combined sound intensity is [tex]1.1 \times 10^{-4} \ W/m^2[/tex] .
An observer sitting on shore sees a canoe traveling 5.0 m/s east, and a sailboat traveling 15.0 m/s west. What is the velocity of the sailboat as observed on the canoe (relative to the canoe)?
Answer:
Vs/c = 20 [m/s]
Explanation:
This is a problem of relative velocities, as velocity is a vector we can use addition or subtraction of vectors for the solution.
We are asked for the velocity of the sailboat with respect to an observer located in the canoe.
[tex]V_{s/c}=V_{sailboat}-V_{canoe}\\V_{s/c}=15-(-5)\\V_{s/c}=20[m/s][/tex]
Why is the speed of the canoe negative?, it is negative because the canoe moves in the opposite direction to the sailboat.
A metal wire is uncharged. Explain how it is possible for a current to flow through it.
Answer:
Most conductors are fully charge neutral when carrying current, since their atomic structure is not altered, and electrons are in their normal state of jumping from atom to atom all the time.
It is just that this movement gets a direction under an external electric field, which causes a net charge flow (current) in conductor. So the conductor remains uncharged.
It is however possible for a capacitor plate to be charged (charged capacitor), and at the same time the plate can be a part of current carrying circuit through two points on it. In this case, charge on plate is independent of current and unrelated with it.
I have made foil type capacitors with such construction where the capacitor was a part of filter circuit in a signal carrier circuit, and connections were made from both ends of each foil.
Two spheres, 1.00 kg each, whose centers are 2.00 m apart, would have what gravitational force between them? A. 3.14 X 10-17 N
B. 1.67 X 10-11 N
C. 8.17 X 10-6N
D. 5.78 X 10-6 N
Answer: B
Explanation: the teacher just told us the answer
The gravitational force between the two spheres is [tex]1.67 \times 10^{-11} \ N[/tex].
The given parameters;
mass of each sphere, m = 1.00 kgdistance between their center mass, r = 2 mThe gravitational force between the two spheres is determined by applying Newton's law of universal gravitation as shown below;
[tex]F = \frac{Gm_1 m_2 }{r^2} \\\\[/tex]
where;
G is universal gravitation constant = 6.67 x 10⁻¹¹ N/m[tex]F = \frac{(6.67\times 10^{-11})\times (1\times 1)}{2^2} \\\\F = 1.67 \times 10^{-11} \ N[/tex]
Thus, the gravitational force between the two spheres is [tex]1.67 \times 10^{-11} \ N[/tex].
Learn more here:https://brainly.com/question/13590473
A bicycle has a momentum of 36 kg* m/s and a very!I city of 4 m/s.What is the mass of the bicycle?
p = 36 kgm/s
v = 4m/s
we know that,
p = mv
so,
[tex]m = \frac{p}{v} [/tex]
[tex]m = \frac{36}{4} [/tex]
[tex]m = 9kg[/tex]
what is the difference between total distance covered vs. total displacement of the rube goldberg
Answer:
The deer traveled 1300m + 500m + 300m, for a total distance. The exact same motion, distance and displacement have significantly different values. It tells you the rate at which an object's displacement, or position, changes.
Total distance covered is amount of distance cover during the course whereas total displacement is difference between initial and final position.
What is distance?Distance is the sum of an object's movements, regardless of direction. Distance can be defined as the amount of space an object has covered, regardless of its starting or ending position.
What is displacement?The term "displacement" refers to a shift in an object's position. It is a vector quantity with a magnitude and direction. The symbol for it is an arrow pointing from the initial location to the ending place. For instance, if an object shifts from location A to position B, its position changes. Displacement is the term used to describe this shift in an object's position.
Hence total distance covered and total displacement are different. Total distance covered is amount of distance cover during the course whereas total displacement is difference between initial and final position.
Learn more about displacement here:
https://brainly.com/question/11934397
#SPJ2
A rigid tank contains an ideal gas at 300 kPa and 600 K. Now half of the gas is withdrawn from the tank and the gas is found at 100 kPa at the end of the process. Determine (a) the final temperature of the gas and (b) the final pressure if no mass was withdrawn from the tank and the same final temperature was reached at the end of the process.
A stretched string is observed to have four equal segments in a standing wave driven at a frequency of 480 Hz. What driving frequency will set up a standing wave with five equal segments?
a) 360 Hz.b) 240 Hz.c) 600 Hz.d) 120 Hz.
Answer:
C) 600 Hz
Explanation:
The fundamental frequency can be related to the driving frequency by the expression below;
f(n) = n * f(1)
Where f(1)= fundamental frequency
f(n) = driving frequency
There are four equal segments in the standing wave , then our n= 4 and our f(n)=4, then we can get the fundamental frequency here
f(4) = 4× f(1)
480 = 4× f(1)
f(1) = 480/4
f(1)=120Hz
Hence, fundamental frequency is 120Hz
To calculate the driving frequency that will set up a standing wave with five equal segments?
n=5
f(n) = n× 120Hz
f(5) = 5×120Hz
= 600Hz.
Hence, the driving frequency that will set up a standing wave with five equal segments is 600Hz
A block of mass, m, sits on the ground. A student pulls up on
the block with a tension, T, but the block remains in contact
with the ground. What is the normal force on the block?
Answer a
Explanation: a
At an amusemlec 27 collisions and powerent park, a 96.0 kg car moving with a speed v bounces elastically off a 135-kg bumper car at rest. If the final speed of the 135-kg car is 1.03 m/s, what is the initial speed of the 96.0-kg car?
By conservation of momentum :
[tex]m_1u_1 + m_2u_2 = m_1v_1 + m_2v_2\\\\96v + 0 = 96v_1 + 135\times 1.03\\\\96v = 96v_1 +139.05 \ \ \ \ \ \ .....1[/tex]
By conservation of energy :
[tex]\dfrac{m_1u_1^2}{2}+\dfrac{m_1u_2^2}{2} =\dfrac{m_2v_1^2}{2} +\dfrac{m_2v_2^2}{2}\\\\96v^2 + 0 = 96v_1^2 + 135(1.03)^2\\\\96v^2 = 96v_1^2 +143.22 \ \ \ \ \ ....2)[/tex]
Solving equation 1 and 2, we get :
v = 1.23 m/s
Therefore, the initial speed of 96 kg car is 1.23 m/s .
Which substance may lower air temperatures after a volcanic eruption?
lava
sulfur dioxide
carbon dioxide
water vapor
The awnser is sulfur dioxide.
The gas that is responsible for lowering the temperature is sulfur dioxide gas.
A volcanic eruption refers to the sudden escape of lava and gases from the earth's core. It usually occurs at a very high temperature. The solidification of the volcano leads to rock formation.
During a volcanic eruption, the gas that is responsible for lowering the temperature is sulfur dioxide gas.
Learn more: https://brainly.com/question/1622004
If the social distancing length between two students is doubled from two metered to four meters, does the gravitational force between the two students increase or decrease?
Explain your reasoning!
Answer:
the gravitational force decreases
Lab - Wave Properties in a Spring
11-05
The wave characteristics you will observe in this lab are common to all waves (water, light, sound,
etc.). Use your prior knowledge and the book to fill in the following blanks, then go in the hall and
perform the lab.
A wave is a disturbance that moves through (propagates) through empty space or through a
_____________. There are two types of waves. A _____________________ wave requires
matter to travel. List some examples of this type:
A _____________________ wave does not require a medium. Examples include:
In order to start and transmit a mechanical wave, a source of _____________ and an
_______________ medium are required. A single disturbance is referred to as a
_______________, and a series of disturbances is a wave __________.
The questions in bold are those you should observe directly. Others will be answered using the book.
A. TYPES OF MECHANICAL WAVES: In the hall, stretch the slinky on the floor until it is
stretched (but still loose). Practice sending single pulses down the slinky by popping your wrist
from the center to the side and back to the center. Then send a continuous wave train along as
your partner holds the other end still. A piece of ribbon should be tied to one coil. Watch the
motion of this ribbon (representing a particle) as the wave travels through the spring.
In this type of wave, the particles move (perpendicular, parallel)
to the direction the wave travels. This type of wave is called a __________________ wave.
Its pulses are called ________________ and ________________.
Now send a pulse by quickly pushing the spring forward and pulling
it back, as shown. This type of wave is called _______________. Watch the motion of the ribbon.
In this type, the particles move _____________ to the direction the wave travels. Its pulses
are called _____________ and _____________. Label each.
Note that all waves transfer _____________ without transferring _______________. In
mechanical waves, particles of the medium vibrate back and forth in simple harmonic motion while
the disturbance (or _____________) moves from one place to another.
B. WAVE SPEED
Send a large pulse, followed by a small one. Does one pulse catch up to the other? ______
(Hint: The person who sends these waves should watch how the waves look when they return. Make
sure that both pulses are large enough initially to make it back to the sender!) The size of the
pulse is called the __________________ of the wave. Did the size affect the speed? ______
Generate a single transverse pulse in the slinky, keeping the stretch constant. Using a stopwatch,
time the journey of the pulse from one end to the other and back again. Take the average of
several trials. _________
Without changing your positions on the floor (therefore keeping the _____________ the pulse
travels the same), pull the slinky tighter using only about 3/4 of the coils. This makes a completely
different medium through which the pulse will travel. Time the journey as before. ___________
Does the kind of medium affect the speed of the pulse? ___________
Lab – Wave Properties in a Spring ____________________
PHYSICSFundamentals
© 2004, GPB
11-06
C. WAVELENGTH AND FREQUENCY
Shake the slinky back and forth steadily to send a
transverse wave train while your partner holds the other end still. On the diagram, label wavelength
(- Greek letter lambda). The frequency of the wave depends on how fast you shake the slinky.
Shake it regularly but slowly, then regularly but rapidly.
Higher frequency waves are generated by shaking the spring (slowly, rapidly). High frequency
waves have (short, long) wavelengths, and low frequency waves have __________.
The speed of a wave in any medium is equal to the _______________ of the wave X
________________. This wave equation ___________________ shows that f and are
______________ proportional. Write the units for each of the variables in this equation.
The exercise involves filling in the gaps with the possible wave
properties that can be obtained from a spring.
How is the Wave Properties in a Spring Lab exercise correctly completed?The correctly completed exercise is presented as follows;
A wave is a disturbance that moves through a medium. There are two
types of waves. A mechanical wave requires matter to travel. List some
examples of this type: sound wave, water wave, spring waves.
A electromagnetic wave does not require a medium. Examples include: Light waves
In order to start and transmit a mechanical wave, a source of
disturbance and a physical medium are required. A single disturbance is
referred to as a pulse, and a series of disturbance is a wave train.
This type of wave is called transverse wave. Its pulses are called crest
and troughs.
Now send a pulse by quickly pushing the spring forward and pulling it
back, as shown. This type of wave is called longitudinal wave. Watch the
motion of the ribbon. In this type, the particles move parallel to the
direction the wave travels. Its pulses are called compression and
rarefactions. Note that all waves transfer energy without transferring
matter. In mechanical waves, particle of the medium vibrate back and
forth in simple harmonic motion while the disturbance (or energy)
moves from one place to another.
B. Wave speed
Does the pulse catch up to the other? yes. The size of the pulse is called
the amplitude of the wave.
Did the size of the pulse affect the speed? No.
The average time wave it takes the wave to travel
Without changing your positions therefore keeping the distance the
pulse travels the same), pull the slinky tighter using only about 3/4 of
coils. This makes a completely different medium through which the
pulse will travel. Time the journey as before time record. Does the kind
of medium affect the speed of the pulse? Yes
C. Wavelength and Frequency
High frequency waves have short wavelengths and low frequency waves
have long wavelengths.
The speed of a wave in any medium is equal to the frequency of the wave × the wavelength. This wave equation [tex]\underline{f = \dfrac{v}{\lambda } }[/tex] shows that f and λ are
inversely proportional. The units of the variables are;
Units of the frequency, f is hertz unit HzUnits of the velocity, v, is m/sUnits of the wavelength, λ, is meters (m)Learn more about waves here:
https://brainly.com/question/14118172
How would the mass and weight of an object on the Moon compare to the mass and weight of the same object on Earth? * Mass and weight would both be less on the Moon. Mass would be the same but its weight would be less on the Moon. Mass would be less on the Moon and its weight would be the same. Mass and weight would both be the same on the Moon.
Answer:
B. Mass would be the same but its weight would be less on the Moon.
Explanation:
The mass of a body can be expressed as the quantity of matter it contains. While the weight of a body is the extent of the gravitational force impressed on the body by a massive body.
Thus, the mass of a body is constant either on the Earth or on the Moon. But the weight would be less on the Moon because the gravitational force on the Moon is far less than that on the Earth. Therefore the weight would be less on the Moon.
The appropriate option is B.
The mass will remain same on both moon and Earth, but weight will be lesser on Moon than Earth. Hence, option (B) is correct.
The prime focus to solve this problem is the mass and weight of an object. The mass of a body can be expressed as the quantity of matter it contains. While the weight of a body is the extent of the gravitational force impressed on the body by a massive body.
So, the mass of a body is constant either on the Earth or on the Moon. But the weight of an object will depend on the mass and the gravitational acceleration.
W = mg
Here, W is weight, m is mass and g is gravitational acceleration.
Weight would be less on the Moon because the gravitational force on the Moon is far less (due to lower value of g) than that on the Earth. Therefore the weight would be less on the Moon.
Thus, we can conclude that the mass will remain same on both moon and Earth, but weight will be lesser on Moon than Earth. Hence, option (B) is correct.
Learn more about the mass and weight here:
https://brainly.com/question/13040516
Bill and Janet are pulling on opposite sides of a table. Bill pulls with a force of 250 N to the left, and Janet pulls with a force of 325 N to the right. What is the net force on the table?
Answer: 75 N to the right
Explanation:
When two forces acting in opposite directions, they will cancel in magnitudes. Here, the net force acting on the table is 75 N to the right.
What is force?Force is an external agent acting on an object to change its motion or to deform it. Force is a vector quantity. Hence, it is characterized by a magnitude and direction.
If two equal forces are acting on object from the same direction, they will add up in magnitudes and the net force is their sum. If the two forces are from opposite directions, they will cancel each other in magnitude and the net force will be the substracted value.
Here, Bill is pulling by 250 N to the left and Janet is pulling to the right by 325 N. The force is not balanced because they are unequal.
net force = 325 - 250 = 75 N
The larger force is to the right. Hence, the net force is 75 N to the right.
Find more on net force:
https://brainly.com/question/13410291
#SPJ2
A rock is at the top of a 20 meter tall hill. The rock has a mass of 10 kg. How much potential energy does it have?
Answer:
1960 JExplanation:
The potential energy of a body can be found by using the formula
PE = mgh
where
m is the mass
h is the height
g is the acceleration due to gravity which is 9.8 m/s²
PE = 10 × 9.8 × 20
We have the final answer as
1960 JHope this helps you
What would be the coefficient of performance if the refrigerator (operating between the same temperatures) was instead used as a heat pump?
COP =
Complete Question
A certain refrigerator, operating between temperatures of -8.00°C and +23.2°C, can be approximated as a Carnot refrigerator.
What is the refrigerator's coefficient of performance? COP
(b) What If? What would be the coefficient of performance if the refrigerator (operating between the same temperatures) was instead used as a heat pump? COP
Answer:
a
[tex]COP = 8.49[/tex]
b
[tex]COP_1 = 9.49[/tex]
Explanation:
From the question we are told that
The lower operation temperature of refrigerator is [tex]T_1 = -8.00^oC = 265 \ K[/tex]
The upper operation temperature of the refrigerator is [tex]T_2 = 23.2 ^oC = 296.2 \ K[/tex]
Generally the refrigerators coefficient of performance is mathematically represented as
[tex]COP = \frac{T_1}{T_2 - T_1 }[/tex]
=> [tex]COP = \frac{265}{296.2 - 265 }[/tex]
=> [tex]COP = 8.49[/tex]
Generally if a refrigerator (operating between the same temperatures) was instead used as a heat pump , the coefficient of performance is mathematically represented as
[tex]COP_1 = \frac{T_2}{ T_2 - T_1}[/tex]
=> [tex]COP_1 = \frac{296.2}{ 296.2 - 265 }[/tex]
=> [tex]COP_1 = 9.49[/tex]
The coefficient of performance if the refrigerator is used as a heat pump is 9.5.
The given parameters;
initial temperature, T₁ = -8 ⁰C = -8 + 273 = 265 Kfinal temperature, T₂ = 23.2°C = 23.2°C + 273 = 296.2 KThe coefficient of performance if the refrigerator is used as a heat pump is calculated as follows;
[tex]COP = \frac{T_2}{T_2 - T_1}\\\\COP = \frac{296.2}{296.2 - 265} \\\\COP =9.5[/tex]
Thus, the coefficient of performance if the refrigerator is used as a heat pump is 9.5.
"Your question is not complete, it seems to be missing the following information";
A certain refrigerator, operating between temperatures of -8.00°C and +23.2°C, can be approximated as a Carnot refrigerator.
What would be the coefficient of performance if the refrigerator (operating between the same temperatures) was instead used as a heat pump?
Learn more about coefficient of performance here: https://brainly.com/question/20713684
Brandon hits a golf ball with an initial velocity of 30 m/s at an angle of 30 above the horizontal. How long is it in the air?
Given :
Brandon hits a golf ball with an initial velocity of 30 m/s at an angle of 30 above the horizontal.
To Find :
How long is it in the air.
Solution :
We know, the formula of time of flight is :
[tex]T = \dfrac{2usin\ \theta}{g}\\\\T = \dfrac{2\times 30\times sin\ 30^o}{9.8}\\\\T = 3.06\ seconds[/tex]
Therefore, the ball is in air for 3.06 seconds.
You take a trip that covers 240 kilometers and takes 4 hours. Your average speed is
Answer:
Your average speed is 60 kilometers per hour
Explanation:
240 divided by 4 is 60
240/4=60
A heat pump has a coefficient of performance of 3.85 and operates with a power consumption of 7020 W. How much energy does it deliver into a home during 1 h of continuous operation?
Answer:
97.3 MJ
Explanation:
The formula for the coefficient of Perfomance is given as
COE = Q/W, where
COE is the coefficient of Perfomance
Q is the heat provided
W serves as the work input.
Dividing both sides of the equation by a factor of time t, we get the coefficient of Perfomance in terms of heating power and input power, so we say
COE = P / P(i),
making heating power, P the subject of formula, we have
P = COE * P(i)
P = 3.85 * 7020 * 1 * 3600
P = 97297200 J
P = 97.3 MJ