The result of the four trials by the student is precise to the actual weight of the lead block.
Since we have been alive for millions of years, we have acquired a sense of measurement, which is necessary for us to comprehend the outside world. Tools that provide scientists a number are necessary for measurements. The issue here is that every measurement, using any measuring device, has some level of uncertainty in the outcome. Error is the name given to this uncertainty. When taking measurements, accuracy and precision are two crucial considerations. These two phrases describe how closely a measurement resembles a value that is understood or accepted.
Accuracy refers to an instrument's capacity to measure exact values. It is, in other words, the degree to which the measured value resembles a standard or real value. Accuracy is possible by obtaining quick readings.
The precision of a substance is defined as the similarity between two or more measurements.
To know more about precision from the link
brainly.com/question/1695072
#SPJ4
which aqueous solution will have the highest melting point? assume all of the solute are nonvolatile and have ideal van't hoff factors.
The highest melting point is 0.100 m AlCl₃
Water has a 0.51 Cl molal melting point elevation constant.
They all share the same molal melting point elevation constant because they are all aqueous solutions.
0.100 M C₆H₁₂O₆ΔT = i*Kb*m
The melting point elevation is ΔT,
i = the van't Hoff factor =1,
The molal elevation constant of water's melting point is 0.51°C/m.
"where m = the molality = 0.100 m"
ΔT = i*Kb*m
ΔT = 1 * 0.51 * 0.100
ΔT = 0.051 °C
0.100 m NaClΔT = i*Kb*m
ΔT =2 * 0.51 * 0.100
ΔT = 0.102 °C
0.100 m AlCl3ΔT = i*Kb*m
ΔT =4 * 0.51 * 0.100
ΔT = 0.204 °C
0.100 m MgCl2ΔT = i*Kb*m
ΔT =3 * 0.51 * 0.100
ΔT = 0.153 °C
Your question is incomplete but most probably your full question was
which aqueous solution will have the highest melting point? assume all of the solute are nonvolatile and have ideal van't hoff factors. 0.100 m C₆H₁₂O₆ 0.100 m NaCl 0.100 m AlCl₃0.100 m MgCl₂
learn more about melting point at
https://brainly.com/question/29578567
#SPJ4
when looking at an element on the periodic table, what number can give you a clue that the element has multiple naturally-occurring isotopes? how do you know?
When we are looking at an element on the periodic table, its mass number helps us determine that the element has multiple naturally-occurring isotopes as the isotopes differ in mass.
Isotopes are those atoms which have the same no. of protons but have different no. of neutrons. Isotopes of a particular element have the same atomic no. but they have different mass numbers. The isotopes of an element are given the same position in the modern periodic table.
The mass number of an element is determined by the total no. or protons and neutrons that are present in its nucleus. For example, there are three isotopes of atom namely protium (¹H), deuterium (²H) and tritium (³H) which differ in the number of neutrons present in the nucleus.
To know more about isotopes here
https://brainly.com/question/13662697
#SPJ4
Scientists want to investigate the effects of caffeine on short term memory by randomly assigning 200 volunteers to intake 86mg of caffeine before a memory quiz and the remaining 200 volunteers to intake 86mg of a placebo before taking a memory quiz. the quiz score of each volunteer is recorded. What is the response variable?
The response variable in this experiment is the quiz score of each volunteer.
This is the variable that the scientists are measuring in order to determine the effects of caffeine on short term memory. The quiz score will be used to compare the performance of the group that consumed caffeine to the group that consumed the placebo, in order to determine whether caffeine has a positive or negative impact on short-term memory. The quiz score is the outcome that is being measured and is the variable that will be used to draw conclusions about the effect of caffeine on memory.
To learn more about response variable:
https://brainly.com/question/22046153
#SPJ4
in a proton transfer reaction, equilibrium will favor the if the reacting acid and base are strong. since a strong acid and base form a conjugate acid and base, the reaction will favor the formation of the acid and base.multiple choice question.reactants; strong; strongproducts; strong; strongreactants; weak; strongproducts; weak; weak
The conjugate base of a Bronsted-Lowry acid is the species formed after an acid donates a proton.
what is conjugate acid and base?
A conjugate acid contains one more H atom and one more + charge than the base that formed it. Conjugate acid is formed when an acid donates a proton to a base. A conjugate base contains one less H atom and one more - charge than the acid that formed it. It is left over substance after acid loses its hydrogen ion.Conjugate base: substance formed when an acid loses a hydrogen ion. Considered a base because it can gain a hydrogen ion to reform the acid.The term conjugate means a pair of things joined together. These two things are exactly the same except for one pair of features that are actually opposite of each other.
To learn more about acid and base refers to:
https://brainly.com/question/9836972
#SPJ4
Find the similarities, differences, and relationships between chemical reactions and nuclear reaction. (At least 2 of each)
The reactants combine to create the final product in both processes. A chemical reaction involves an electron rearrangement rather than the nucleus of an element changing as in a nuclear reaction.
What is the similarities and differences between chemical reactions and nuclear reactions?An atom's nucleus changes during nuclear reactions, typically creating a new element. On the other hand, nuclear modifications do not occur during chemical reactions; rather, only the arrangement of electrons does. The behavior of various isotopes of an element in chemical reactions is typically similar.
In both processes, the reactants unite to produce the end result. While an element's nucleus changes in a nuclear reaction, an electron rearrangement occurs in a chemical reaction.
Outside of the nucleus, chemical reactions typically take place. Only within the nucleus do nuclear reactions occur. When chemical processes take place, elements retain their identity, and atom nuclei likewise do not change. Atomic nuclei totally transform and new elements are created during nuclear processes.
To learn more about reactions refer to:
https://brainly.com/question/11231920
#SPJ1
Research the dangers of aerosol cans and pressure cookers and write a report about those dangers. The report should be at least 200 words.
Note that Aerosol cans can explode if punctured or exposed to heat. Pressure cookers can malfunction and release steam & hot liquids if not properly maintained. Always use safety precautions and supervise children around these items.
What is the rationale for the above response?Aerosol cans and pressure cookers are both ubiquitous household devices that, if not used properly, can be deadly.
Pressurized gas in aerosol cans forces the product out of the can. An aerosol can can explode if it is pierced or exposed to heat, inflicting significant harm or even death. It is critical to keep aerosol cans away from heat sources at all times and to never puncture or burn them.
Pressure cookers cook food faster by trapping steam within the pot to produce high pressure and high temperatures. However, if the pressure cooker is not correctly maintained or operated, it might malfunction and cause burns or scalds by releasing steam and boiling liquids.
It is critical to be aware of the possible risks of these goods and to use them with caution. Keep them away from heat sources and in excellent functioning order at all times. If you're not sure how to use them securely, seek assistance from an adult. It is also critical to watch youngsters while they are in the vicinity of aerosol cans or pressure cookers to protect their safety.
Learn more about Aerosol Cans:
https://brainly.com/question/29418985
#SPJ1
a sample of metal has a mass of 17.08 g, and a volume of 7.34 ml. what is the density of this metal?
The density of this metal sample is 2.32 g/mL.
To calculate the density of a sample of metal, we divide the mass of the sample by its volume. The density of an object is usually measured in g/cm³ (grams per cubic centimeter) or g/mL (grams per milliliter).
The formula for density is:
density = mass / volume
In this case, the mass of the metal is 17.08 g and its volume is 7.34 ml.
So we can calculate density by substituting these values into the formula:
density = 17.08 g / 7.34 ml = 2.32 g/mL
So, the density of this metal sample is 2.32 g/mL.
It's important to note that density of a metal is a characteristic property, so it can be used to identify a metal.
To know more about density click here:
https://brainly.com/question/29775886#
#SPJ4
when a student uses mass spectrometry to verify that they made compound 2, what is the expected m/z of the molecular ion peak (m ) for compound 2? (note: acetic acid and propanol each have a molecular weight of 60 g/mol.)
Answer:
Explanation:
m/z represents mass divided by charge number and the horizontal axis in a mass spectrum is expressed in units of m/z.Since z is almost always 1 with GCMS, the m/z value is often considered to be the mass.Mass spectrometry is an analytical tool useful for measuring the mass-to-charge ratio (m/z) of one or more molecules present in a sample.These measurements can often be used to calculate the exact molecular weight of the sample components as well.The molecular weights of the two components, which together have a molecular weight of 120 g/mol, would be the predicted m/z of the molecular ion peak for compound 2, which is a combination of acetic
Chemical compounds made up of two or more atoms and bound together by chemical bonds are called molecules. These bonds can be ionic or covalent, in which case the atoms transfer electrons rather than sharing them. Either H2 or DNA are examples of simple molecules. The different atom kinds and their arrangements inside a molecule affect the characteristics of that molecule. Molecules including proteins, lipids, and nucleic acids are necessary for the operation of living things, according to biochemistry. The kinds and configurations of molecules inside a material can have an impact on its characteristics, according to materials science. Pharmaceuticals create compounds that interact with certain
Learn more about molecular here:
https://brainly.com/question/3016219
#SPJ4
you will be rewarded with the necessary items to make your S'morel
If we were to add a piece of solid Cu to an aqueous solution of silver
nitrate, the Silver would be replaced in a single replacement reaction
forming aqueous copper (I) nitrate and solid silver. How much silver is
produced is 15.00 gramps of Cu is added to the solution of excess silver
nitrate? Show al work and don't forget to use significant figures.
50.9 grams of Cu are added to the excess silver nitrate solution.
What is molar mass?The molar mass of a chemical compound is defined in chemistry as the ratio between the mass and amount of substance in any sample of said compound. The molar mass of a substance is a bulk property, not a molecular property. A substance's molar mass is the mass in grams of one mole of the compound. A mole is the number of entities present in a substance, such as atoms, molecules, or ions. A mole of any substance is defined as 6.022*10^23 molecules.
Here,
moles = mass÷ molar mass
molar mass of Cu = 63.5 g/mol
moles = 15.00 g÷ 63.5 g/mol
= 0.236 moles
moles of Ag =0.236
moles x 2/1 =0.472 moles
mass = moles x molar mass
the molar mass of Ag =107.87 g/mol
mass = 0.472 moles x 107.87 g/mol = 50.9 g
50.9 grams of Cu is added to the solution of excess silver nitrate.
To know more about molar mass,
https://brainly.com/question/11766789
#SPJ1
a lot of energy is released when hydrogen and oxygen react to make water. the fuel cell uses the same reaction, but what happens to the energy?
Answer:
The energy is released/harnessed in the form of an electrical current.
Explanation:
The concept of a fuel cell is to harvest the energy of the H2 + O2 reaction in the form of electrical current, not as light, heat, and sound. Although energy in the light, heat, and sound provide a higher entertainment value, the electricity produced in a fuel cell proves useful in powering computers, electric cars, phones, televisions, toasters, and other electrical and electronic devices. The TV, phone, and computer provide substitute entertainment.
The amount of energy released is the same. It is simply in a different form.
two differences in properties between sugar and sugar solution
Sugar is solute while water is solvent.
What is solution?
Solution can be defined as a homogeneous mixture of two or more components in which one component is uniformly distributed in another component. The solvent is known to be a substance that dissolves the other substance and is present in a greater amount.
Solubility is the ability of a substance solute to dissolve in another substance solvent. When you add sugar to water the sugar dissolves and the mixture becomes a solution. In this method sugar is the solvent and water is the solution
Learn more about solution here: brainly.com/question/24372553
#SPJ1
If 613.28 mL of 2.744 M of aluminum hydroxide reacts with 10.35 g of ammonium persulfate in a chemical reaction. Find the pressure of the gas produced if you managed to collect 1536.70 mL of it at 42.455 °C. Show 2 decimal places.
The pressure of the gas produced is approximately 587.17 kPa.
How to find the pressure of the gasTo solve this problem, we first need to find the amount of gas produced by the reaction of aluminum hydroxide with ammonium persulfate, then use the Ideal Gas Law (PV = nRT) to calculate the pressure.
First, let's find the number of moles of ammonium persulfate by using the molar mass:
10.35 g ÷ (2 * (1 + 32 + 64 + 16)) g/mol = 0.108 mol
Next, let's find the number of moles of aluminum hydroxide:
613.28 mL * 2.744 M = 1692.04 mol
Now, let's assume that the reaction goes to completion and that all the aluminum hydroxide reacts with ammonium persulfate, so the number of moles of gas produced will be equal to the number of moles of ammonium persulfate:
0.108 mol
Finally, we can use the Ideal Gas Law to calculate the pressure:
P = (n * R * T) / V
where n = 0.108 mol, R = 8.31 J/mol K, T = (42.455 + 273.15) K, and V = 1536.70 mL * 10^-3 L
P = (0.108 * 8.31 * (42.455 + 273.15)) / (1536.70 * 10^-3)
P = (0.108 * 8.31 * 315.605) / (1.5367)
P = 905.752 / 1.5367
P = 587.17 kPa
So, the pressure of the gas produced is approximately 587.17 kPa.
Read more about pressure here:
https://brainly.com/question/28012687
#SPJ1
iron crystallizes in a body-centered cubic cell having an edge length of 287.0 pm. what is the density of iron in g/cm3
The density of iron that crystallizes in a body-centered cubic cell having an edge length of 287.0 pm is 7.87g/cm³
In this case, iron is the given object, and we utilize the atomic number of iron to determine density, which is the ratio of the given object's mass to its volume.
Length = 287pm = 287x10⁻¹⁰cm, as we are aware.
Fe's atomic mass is 56.0u with a Z=2 configuration (for body centered cubic unit cell)
Na is Avogadro number = 6.022 x 10²³
Density = ZM / a³N
Z=body-centered cubic unit cell,
a=Length Density
Substituting the above values in the density formula we get:
Density = ZM / a³N
ρ= (2 x 56)/(287x10⁻¹⁰cm)³ (6.022 x 10²³).
ρ=7.87g/cm³
Learn more about density at https://brainly.com/question/14831918
#SPJ4
Explain how human activity can affect the carbon cycle.
I
Answer:
Humans use many fossil fuels such as oil and coal which in turn releases much carbon into the atmosphere. And burning of the forests also releases much carbon as well. This carbon in the atmosphere does many negative changes to the earth such as causing ocean acidification and overall hurting the planet's ecosystems.
the following substances dissolve when added to water. classify the substances according to the strongest solute-solvent interaction that will occur between the given substances and water during dissolution.
ion-ion forces N/A, dipole-dipole forces-CH3OH-HF, ion-dipole forces MgI2,CuCl2, London dispersion forces N/A, hydrogen bonding -C2H5OH and NH3
London dispersion forces are a particular kind of intermolecular force that affects atoms and molecules that are typically electrically symmetric, meaning that the distribution of the electrons with respect to the nucleus is symmetric. The forces of van der Waals include them. After the German physicist Fritz London, the LDF was created. An atom's unequal distribution of electrons results in London dispersion forces. As a result, the atom acquires a slight negative () and slight positive () charge on either side. There is now a transient dipole in place. This transient dipole may cause a transient dipole on an adjacent atom or molecule.
the following substances dissolve when added to water. classify the substances according to the strongest solute-solvent interaction that will occur between the given substances and water during dissolution.
1. CH3OH
2.MgCl2
3. CUCl2
4. NH3
5.C2H5OH
Learn more about London dispersion forces here:
https://brainly.com/question/20514601
#SPJ4
11
3 points
Given 0. 842 g of NH3 and 0. 728 g of O2, which is the EXCESS reactant?
3
H20
02
4
NH3
UT
N2
6
7.
Taking into account the reaction stoichiometry, given 0.842 g of NH₃ and 0.728 g of O₂, NH₃ is the excess reactant.
Reaction stoichiometryThe balanced reaction is:
4 NH₃ + 5 O₂ → 4 NO + 6 H₂O
By reaction stoichiometry, the following amounts of moles of each compound participate in the reaction:
NH₃: 4 molesO₂: 5 molesNO: 4 molesH₂O: 6 molesThe molar mass of the compounds is:
NH₃: 17 g/moleO₂: 32 g/moleNO: 30 g/moleH₂O: 18 g/moleBy reaction stoichiometry, the following mass quantities of each compound participate in the reaction:
NH₃: 4 moles ×17 g/mole= 68 gramsO₂: 5 moles ×32 g/mole= 160 gramsNO: 4 moles ×30 g/mole= 120 gramsH₂O: 6 moles ×18 g/mole= 108 gramsDefinition of limiting and excess reagentThe limiting reactant is the one that is found in the least amount and, therefore, will be finished first at the time of the chemical reaction, resulting in the end of the reaction. In other words, when this reagent is finished, it will no longer be possible to continue generating a certain product.
The reactant in excess is one of which there is more than what is necessary for the chemical reaction to take place.
Limiting and excess reagent in this caseTo determine the limiting reagent, it is possible to use a simple rule of three as follows: if by stoichiometry 68 grams of NH₃ reacts with 160 grams of O₂, 0.842 grams of NH₃ reacts with how much mass of O₂?
mass of O₂= (0.842 grams of NH₃× 160 grams of O₂)÷68 grams of NH₃
mass of O₂= 1.98 grams
But 1.98 grams of O₂ are not available, 0.728 grams are available. Since you have less mass than you need to react with 0.842 grams of NH₃, O₂ will be the limiting reagent.
Then, NH₃ will be the excess reactant.
Learn more about the reaction stoichiometry:
brainly.com/question/24741074
brainly.com/question/24653699
#SPJ1
Carbohydrates like sugars and starches are made of only three elements: carbon (C), hydrogen (H), and oxygen (O). How is it possible that so many different carbohydrates can be formed using only these three elements?
These elements are the least reactive in their family.
Different protons let these elements bond in a number of different ways.
Different combinations of the three elements result in different compounds.
These elements form long chains that keep growing, so the identity of each compound is always changing
Carbohydrates like sugars and starches are made of only these three elements (C,H,O) form long chains that keep growing, so the identity of each compound is always changing.
Carbon, hydrogen, and oxygen make up the biological molecules known as carbohydrates, with the ratio of one carbon atom (C) to one water molecule (H 2O) being about right. Because they are composed of carbon (carbo-) and water, carbohydrates have the term "carbohydrates" (-hydrate). The length of carbohydrate chains varies, and the three types of physiologically significant carbohydrates are monosaccharides, disaccharides, and polysaccharides. We will learn more about each type of carbohydrate in this article, as well as the vital energy and structural functions they provide in humans and other living things.
learn more about Carbohydrates Refer:brainly.com/question/29775112
#SPJ4
the equation for the standard enthalpy of formation of potassium bromate, kbro 3, corresponds to which reaction?
The equation for the standard Enthalpy of Formation of potassium bromate, KBrO3, corresponds to the reaction in which potassium bromate is formed from its individual elements at standard conditions (25°C and 1 atm pressure). The reaction can be represented as:
K(s) + Br2(l) + 1/2O2(g) → KBrO3(s)
The standard enthalpy of formation for a substance is the change in enthalpy that occurs when one mole of the substance is formed from its individual elements at standard conditions.
In this case, the standard enthalpy of formation for potassium bromate is the amount of heat released or absorbed when one mole of potassium bromate is formed from its individual elements (potassium, bromine, and oxygen) at standard conditions.
Learn more about Enthalpy of Formation here: https://brainly.com/question/28302300
#SPJ4
If I have 5 moles of a gas at a pressure of 6. 5 atm and a volume of 14 liters, what is the temperature? You must show all your work to receive credit. Your answer must have the correct unit
The temperature of the gas is 2.18 K, or -270.97°C, if I have 5 moles of the gas at a pressure of 6. 5 atm and a volume of 14 litres. The physical concept of temperature indicates in numerical form how hot or cold something is.
We may apply the Ideal Gas Law, which stipulates that PV = nRT, to determine the temperature of a gas.
P, V, and n all have known values of 6.5 atm, 14 L, and 5 moles, respectively. We also know that R, or 8.314 J/mol K, is the ideal gas constant.
So, to get the temperature, we may apply the equation shown below:
PV = nRT
T = (PV) / (nR) (nR)
T is calculated as (6.5 atm x 14 L) / (5 mol x 8.314 J/mol K).
T = (91 J) / (41.57 J/K)
T = 2.18 K
A thermometer is used to determine temperature. Thermometers are calibrated using a variety of temperature scales, which historically defined distinct reference points and thermometric substances.
learn more about temperature here:
https://brainly.com/question/7510619
#SPJ4
when 66.4 g of hydrochloric acid reacts with excess manganese (iv) oxide, how many grams of chlorine gas are formed?
When 66.4 g of the hydrochloric acid reacts with the excess manganese (iv) oxide, The grams of chlorine gas are formed is 129.2 g.
The reaction is given as :
4HCl(aq) + MnO₂(s) ---> MnCl₂(aq) + 2H₂O(g) + Cl₂(g)
Given that :
The mass of the hydrochloric acid = 66.4 g
The number of moles = mass / molar mass
The number of moles = 66.4 / 36.45
= 1.82 mol
1 mole of HCl produces 1 mole of Cl₂
Moles of Cl₂ = 1.82 mol
The mass of Cl₂ = moles × molar mass
= 1.82 × 71
= 129.2 g
Thus, the mass of the chlorine gas is 129.2g.
To learn more about moles here
https://brainly.com/question/26416088
#SPJ4
what most likely happens to soil when crops are not rotated from year to year?
Answer:
The soil nutrients will be depleted
Explanation:
Rotating crops provides productivity benefits by improving soil nutrient levels and breaking crop pest cycles.
four different containers are labeled C+O2, CO, CO2, and Co. Based on the labels, classify each as an element, a compound, a homogeneous mixture, or a heterogeneous mixture. Explain your reasoning.
Answer:
Element - Co. This is because an element is an atom that is made up of purely its own element. In this case, we have Co, also known as Cobalt on the periodic table of elements
Compound - CO. A compound is a substance that can be broken down into simple stable substances. Each compound is made from the atoms of two or more elements that are chemically bonded. As you can see, C (carbon) and O (oxygen) are chemically bonded together
Homogeneous mixture - C+O2
Heterogeneous mixture - CO2
a compound of bromine and fluorine is used to make uf6. the compound contains 58.37 mass percent bromine. determine its empirical formula.
Uf6 is created using a bromine and fluorine combination. BrF3 is standard empirical formula for both the specified chemical.
Why does empirical formula exist?Typically, the stoichiometry is used to only display the components of a molecule. When one wishes to quickly identify the elements they are working with, this is helpful. When you want to know how several atoms of each element are represented in the molecule, the chemical weight is the most helpful.
Why does statistics benefit from empirical rule?In statistics, the experimental rule is frequently applied to forecast outcomes. These rule can be employed as a rough approximation of the outcomes of the upcoming data after computing the error margin and before gathering precise data.
Percentage of Br = 58.37 %
Percentage of F = 41.63 %
Mass of Br = 58.37 g
Mass of F = 41.63 g
Bromine = 0.73 /0.73
= 1
Fluorine = 2.19 / 0.73
= 3
ratio = Br : F
= 1 : 3
To know more about empirical formula visit:
https://brainly.com/question/14044066
#SPJ4
how do solids, liquids, and gases differ? how do solids, liquids, and gases differ? in solid matter, atoms or molecules pack close to each other but, they are free to move; in liquid matter, atoms or molecules pack about as closely as they do in solid matter, they are also free to move; in gaseous matter, atoms or molecules have a lot of space betwee
Solids, liquids, and gases differ in terms of packaging of the atoms in its constituent atomic level.
Solids, liquids, and gases are the three main states of matter. They differ in the way their atoms or molecules are arranged and how they interact with one another. Solids have a definite shape and a definite volume. The atoms or molecules in a solid are tightly packed together and are not free to move around. Solids also have a low compressibility and a high density. Liquids have a definite volume but no definite shape. They take the shape of their container. The atoms or molecules in a liquid are close together but are free to move around. Liquids have a low compressibility and a lower density than solids. Gases have no definite shape or volume. They expand to fill their container. The atoms or molecules in a gas are widely spaced and are free to move around. Gases have a high compressibility and a low density. Examples of gases include air, oxygen, and natural gas. In summary, Solids have a fixed shape and volume, liquids take the shape of their container, have a definite volume and gases have no fixed shape or volume and expand to fill their container.
To know more about atoms please refer: https://brainly.com/question/1566330
#SPJ4
Christopher investigated force and mass by applying the same force on three different objects. He recorded his observations in a table. What can Christopher do so that object 3 moves about the same distance as object 1
Christopher can change the force applied to item 3 to cause it to move the same distance that object 1 did. Mass times acceleration equals force (F = ma). As a result, the acceleration will decrease.
if the force is maintained while the object's mass increases. Christopher may thus exert additional force on item 3 to make up for the object's increased mass. In order for object 3 to move the same distance with the same force as object 1, he can also reduce its mass to match object 1's. As an alternative, Christopher can change the amount of friction that object 3 encounters. The force that opposes an object's motion is known as the friction force. If item 3 encounters less resistance to motion,With the same effort, it will travel further. To minimize friction and have item 3 go the same distance as object 1, Christopher might apply a lubricant to it. Christopher may make item 3 travel the same distance as object 1 by changing the force, mass, or friction force of that object.
learn more about Mass here:
https://brainly.com/question/19694949
#SPJ4
32. A geologist studies the side of a mountain with many layers of Earth exposed. The geologist wants to know more about when a particular layer of sandstone formed. Which observation would best help determine the age of the sandstone layer? a. The width of the layer of sediment b. The type of fossils in the sediment c. The amount of moisture in the sediment d. The color of the minerals in the sediment
The sandstone is younger if the granite contains sandstone inclusions. The sandstone is younger if it shows evidence of contact metamorphism.
Explain about the geologist?Geologists are scientists that research the Earth's processes, materials, history, and natural features. There are other subcategories of geologists, including economic geologists who search for and exploit the planet's resources and environmental geologists who research how humans interact with the natural world.
Geologists examine the Earth's components, operations, byproducts, physical characteristics, and past. In connection to the geologic, climatic, and human processes that shape them, geomorphologists study the landforms and landscapes of the planet.
Those who study the Earth's surface and the materials that make it up are known as geologists. Geology, or the study of rocks, is the name of this field of study.
To learn more about geologist refer to:
https://brainly.com/question/1490622
#SPJ1
Would a separation of the types described above cause
change? Explain your answer.
chemical change or a physical
In a physical change, the substance's shape or appearance changes, but the type of matter it contains stays the same. But when matter undergoes a chemical change, at least one new substance with novel properties is created.
What is a chemical change?Chemical synthesis, or, alternatively, chemical decomposition into two or more different substances, occurs when one substance reacts with another to create a new substance.
Physical modifications are those that affect a chemical substance's form but not its chemical composition. Physical changes are usually unable to separate compounds into chemical elements or simpler compounds, but they can be used to separate mixtures into their component compounds.
An overview was given as your information is incomplete.
Learn more about chemical change on:
https://brainly.com/question/19794032
#SPJ1
Metal- magnesium
Appearance of metal- ?
Reactant-?
Observation of reaction-?
Magnesium and oxygen interact to create light that is so intense that it temporarily renders you blind.
What kind of reaction was observed when magnesium was burned?After burning, the magnesium oxide turns into a white powder. To create this powdery substance, magnesium surrenders two electrons to oxygen atoms. Exothermic reaction, as in this.Because so much heat is released during the reaction, magnesium burns so brightly. Magnesium provides two electrons to oxygen during this exothermic process, resulting in the formation of powdered magnesium oxide (MgO).When magnesium ribbon is burned in the air, the oxygen in the air combines with the magnesium to generate magnesium oxide. As a result, the following happens: Q. 2Mg+O2=2MgO.It emits bright white light. Magnesium reacts with oxygen to make magnesium oxide, which burns in steam to produce white magnesium oxide and hydrogen gas.To learn more about Magnesium refer to:
https://brainly.com/question/1533548
#SPJ1
13) A spoonful of sodium chloride is dissolved in a liter of water. What is
sodium chloride in this solution? *
Molecule
Solute
Solvent
Precipitate
A spoonfull of sodium chloride is dissolved in a liter of water.Solute is sodium chloride in this solution.
Salt, often known as sodium chloride (NaCl), is a substance that human body needs in order to:transporting and absorbing nutrition,keep blood pressure steady,maintain the proper fluid equilibrium.send nerve impulses,Muscles are tense and relaxed.Since salt is an inorganic substance, it does not originate from biological things. It is created when sodium chloride and chloride combine to produce white, crystalline cubes.Although salt is essential for your body to operate, too little or too much salt can be bad for your health.While salt is widely used in cooking, it is also a component of several meals and cleaning products. Your doctor or nurse will often administer sodium chloride as an injection in medical situations. Continue reading to learn why and how salt affects your body.
learn more about sodium chloride Refer:brainly.com/question/9811771
#SPJ4
a mixture contains 0.250 mol of fe and 1.20g of c. what is the total number of atoms in the mixture?
If a mixture contains 0.250 mol of fe and 1.20g of c. the total number of atoms in the mixture is: 2.106× 10^23.
How to find the Total number of atoms ?First step is to convert it into number of atoms
Atoms of Fe = 0.250 mol × 6.02 × 10^23 /1 mol
Atoms of Fe = 1.505 ×10^23
1.20g of C to atoms of C
Molar mass of C =12.011g/mol
Atom of C = 1.20g × 1 mol/12.011g × 6.02 × 10^23 /1 mol
Atom of C = 6.014× 10^22
Now let find the total number of atoms
Total number of atoms = Atoms of Fe + Atoms of C
Total number of atoms = 1.505 ×10^23 + 6.014× 10^22
Total number of atoms = 2.106× 10^23
Therefore the Total number of atoms is 2.106× 10^23
Learn more about Total number of atoms here:https://brainly.com/question/441927
#SPJ1