A train starts at rest and ends up with 1500 J of kinetic energy. How much work was done on the train?

Answers

Answer 1

Answer:

  1500 J

Explanation:

Apparently, we're to assume that no energy is lost to friction or other effects. Then all of the energy the train has is due to work being done on it.

  1500 J of work was done on the train


Related Questions

White light is an _____ mixture of all the colors.

Answers

Answer:

White light is a combination of all colors in the color spectrum.

Explanation:

It has all the colors of the rainbow. Combining primary colors of light like red, blue, and green creates secondary colors: yellow, cyan, and magenta

What is the current in a 120V circuit if the resistance is 20Ω?

Answers

We have: [tex]I=\frac{U}{R}=\frac{120}{20}=6A[/tex]

ok done. Thank to me :>

Answer:

The Current is 6 Ampere.

Step-by-step explanation:

Given :

[tex]\small\red\bull[/tex] Voltage = 120V[tex]\small\red\bull[/tex] Resistance = 20Ω

To Find :

[tex]\small\red\bull[/tex] Current

Using Formula :

[tex] \star{\small{\underline{\boxed{\sf{ I = \dfrac{V}{R}}}}}}[/tex]

[tex]\small\blue\star[/tex] I = Current[tex]\small\blue\star[/tex] V = Voltage[tex]\small\blue\star[/tex] R = Resistance

Solution :

Substituting all the given values in the formula to find Current :

[tex]{\dashrightarrow{\pmb{\sf{ I = \dfrac{V}{R}}}}}[/tex]

[tex]{\dashrightarrow{\sf{ Current = \dfrac{Voltage}{Resistance}}}}[/tex]

[tex]{\dashrightarrow{\sf{ Current = \dfrac{120}{20}}}}[/tex]

[tex]{\dashrightarrow{\sf{ Current = \cancel{\dfrac{120}{20}}}}}[/tex]

[tex]{\dashrightarrow{\sf{ Current = 6A}}}[/tex]

[tex]{\star{\underline{\boxed{\sf{\red{ Current = 6A}}}}}}[/tex]

Hence, the Current is 6 Ampere.

[tex]\rule{300}{1.5}[/tex]

A system consisting of two particles is known to have zero total momentum. Does it follow that the kinetic energy of the system is zero as well?

Answers

Answer:

all of the particles are at rest (v = 0)

Explanation:

Therefore, since nothing is moving, the total momentum of the system must also be zero.

As a system consisting of two particles is known to have zero total momentum, the kinetic energy of the system will be zero as well.

What is momentum?

Momentum is the product of a particle's mass and velocity. Momentum is a vector quantity, which means it has a magnitude as well as a direction.

According to Isaac Newton's second law of motion, the time rate of change of momentum equals the force acting on the particle.

Momentum describes the relationship between an object's mass, velocity, and direction.

Any change in momentum generates force. As a result, a change in momentum is used to calculate the force acting on the object.

Because the total kinetic energy is zero, all of the particles are at rest (v = 0). As a result, because nothing is moving, the system's total momentum must also be zero.

Thus, the statement is true.

For more details regarding momentum, visit:

https://brainly.com/question/24030570

#SPJ2

What is an object's mass if it accelerates at 5 m/s2 when a force of 0.5 N is applied?

Answers

Answer:

0.1kg

Explanation:

mass = force / acceleration

0.5 / 5

0.1kg

the motion of a particle along a straight line is represented by the position versus time graph above. at which of the labeled points on the graph is the magnitude of the acceleration of the particle greatest?

Answers

Point A has the largest magnitude of acceleration as compared to other points on the position verses time graph.

On the graph, A is the point where magnitude of the acceleration of the particle is greatest as compared to other positions on the graph because the height of point A is the largest as compared to other points of the graph.

The graph shows at which point acceleration of an object is higher and lower so we can conclude that point A has the largest magnitude of acceleration as compared to other points on the position verses time graph.

Learn more about acceleration here: https://brainly.com/question/933224

Learn more: https://brainly.com/question/25887663

How many volts would it take to push 1 amp through a resistance of 1 ohm?

Answers

V=I x R so V= 1 x 1 =1V

Answer:

[tex]1\; \rm V[/tex].

Explanation:

Ohm's Law give the following relationship between the potential [tex]V[/tex] across a conductor, the electrical resistance [tex]R[/tex] of that conductor, and the current [tex]I[/tex] through that conductor:

[tex]V = I \, R[/tex].

It is given that the current through this conductor is [tex]I = 1\; {\rm A}[/tex], and that the electrical resistance of this conductor is [tex]R = 1\; \rm \Omega[/tex].

Note, that the unit of electrical resistance Ohm is a composite unit; [tex]1\; {\rm \Omega} = 1\; {\rm V \cdot A^{-1}}[/tex] (volts per ampere.)

Substitute the value of [tex]I[/tex] and [tex]R[/tex] into the equation [tex]V = I \, R[/tex] from Ohm's Law to find the potential across this conductor:

[tex]\begin{aligned}V &= I \, R \\ &= 1\; {\rm A} \times 1\; {\rm \Omega} \\ &= 1\; {\rm A} \times 1\; {\rm V \cdot A^{-1}} \\ &= 1\; {\rm V}\end{aligned}[/tex].

Over a period of 2.50 seconds, a speedboat accelerates uniformly from 18.5 m/s to 46.5 m/s. What is the acceleration of the speedboat relative to the shore?

Answers

The answer is : 11.2 m/s2

According to the question, the acceleration of the speedboat relative to the shore is found to be 11.2 [tex]m/sec^2.[/tex]

What is Acceleration?

Acceleration may be characterized as the rate of change of the velocity of an object with respect to time. It is a vector quantity, as it defined both magnitude and direction. This allows you to measure how fast velocity changes in meters per second squared (m/s^2).

According to the question,

The initial velocity of the boat = 18.5 m/s.

The final velocity of the boat = 46.5 m/s.

Difference in velocity = Final velocity - Initial velocity = 46.5-18.5 = 28 m/s.

The formula for calculating the acceleration of the boat is as follows:

a = Difference in velocity/time taken.

           = 28/2.50 = 11.2 [tex]m/sec^2[/tex].

Therefore,  the acceleration of the speedboat relative to the shore is found to be 11.2 [tex]m/sec^2.[/tex]

To learn more about Acceleration, refer to the link:

https://brainly.com/question/460763

#SPJ6

Please help my physics teacher cannot teach pls hurry pls help uwu

Answers

Hi there!

To find how much the spring stretches with the mass attached, we must find the spring's equilibrium point.

The equilibrium point satisfies the following:

[tex]\large\boxed{\Sigma F = 0}[/tex]

The two forces acting in this situation are the weight of the mass and the spring force.

The spring force (restoring force) is in the opposite direction of the weight, so:

[tex]\Sigma F = 0 = Mg- k\Delta x[/tex]

Mg = weight

k = Spring Constant (N/m)

Δx = distance to equilibrium point (m)

Now, we can set the two equal to each other:

[tex]Mg = k\Delta x\\\\544 = 1146\Delta x\\\\\boxed{\Delta x= .475 m}[/tex]

This is not meant to be a long, mathematically-intensive problem. If you find yourself going down that road, you might want to rethink your approach.

Answers

Answer:

rethink your approach to what?

Explanation:

How far does an object travel if it is moving at a speed of 4 m/s for 3.2 seconds?

Answers

Answer:

12.8 meters

Explanation:

m/s means meters per second. So, to find how far it would travel in 3.2 seconds, you would multiply 4 meters every second by 3.2 seconds.

4×3.2=12.8 meters

How did Thomson's model get its name?

Answers

Answer:

thats actually a really good question. sadly i don't know the answer to it. but im sure that there are others who can!

On average, how many stars would we have to search before we would expect to hear a signal? assume there are 500 billion stars in the galaxy.

Answers

We would have to search at least 5,000,000,000 (5 billion) stars before we would expect to hear a signal.

To find out the number of stars that we will need to search to find a signal, we need to use the following formula:

total of stars/civilizations500,000,000,000 (500 billion) stars / 100 civilization = 5,000,000,000 (5 billion)

This shows it is expected to find a civilization every 5 billion stars, and therefore it is necessary to search at least 5 billion stars before hearing a signal from any civilization.

Note: This question is incomplete; here is the complete question.

On average, how many stars would we have to search before we would expect to hear a signal? Assume there are 500 billion stars in the galaxy.

Assuming 100 civilizations existed.

Learn more about stars in: https://brainly.com/question/2166533

What is the mass of a box if it accelerated 5 m/s from a force of 12 N?

Answers

Answer:

60

Explanation:

You multiply the acceleration and the force and you get your answer

an object moves 15.0 m north and then 11.0 m south. find both the distance it has traveled and the magnitude of its displacement.

Answers

Distance is 15 m + 11 m =26 m
Displacement is North 15 - 11 south= 4 m north.

7. A drag car takes off at the green light heading in a straight line. The car goes
from a complete stop to 45m/s in 9 seconds. What is its acceleration?

Answers

Answer:

405

Explanation:

If the car stops at 45m/s in 9 seconds then it took the car 405 meters to stop

Jeff Gordon leads his race and must drive into a curve at top speed to win it all. The radius of the curve is 1000 m and the coefficient of static friction between his tires and the dry pavement is 0.50.

Answers

Answer:

Apparently the curve is not banked.

The maximum frictional force is -

Ff = m g * .5

Fc = m v^2 / R     where Fc is the centripetal force that must be present in

                            order for the car not to slip.

.5 g = v^2 / R      equating forces

v^2 = .5 R g = .5 ^ 1000 * 9.80

v = (500 * 9.80)^1/2 = 70 m/s

(about 230 ft/sec = 230/88 * 60 = 157 mph

A car traveling in a northeasterly direction at a rate of 50 km/h represents which of the following?
A.
deceleration
B.
velocity
C.
speed
D.
acceleration

Answers

Answer:

c.

Explanation:

Speed is the time rate at which an object is moving along a path, while velocity is the rate and direction of an object's movement. Put another way, speed is a scalar value, while velocity is a vector.

Formula

s = \frac{d}{t}

s = speed

d = distance traveled

t = time elapsed

Mechanical energy is similar to thermal energy because they both?

Answers

Answer:

Mechanical energy is the ordered movement of the molecules as a single unit. Thermal energy is the random movement of the molecules. Mechanical energy can be 100% converted to thermal energy, but thermal energy cannot be fully converted to mechanical energy.

1. What do machines do? Change the amount of force one exerts. Decrease the amount of work that is done. Increase the amount of work that is done. Eliminate friction.​

Answers

Answer: increase the amount of work that is done?

Explanation:

I’m not entirely sure to be honest but I’ll just use my logic here. Machines are made to increase efficiency and production. Machines are made to save time and energy as a pose to human work. So several machines can mass produce a lot of things and keep business booming. I’m not very good at explaining things but I hope this makes sense eventually.

A 10.0-kg crate slides along a raised horizontal frictionless surface at a constant speed of 4.0 m/s. The crate then slides down a frictionless incline and across a second, roughened horizontal surface as shown in the figure. What is the kinetic energy of the crate as it reaches the lower surface?

Answers

The kinetic energy of the crate as it reaches the lower surface is 80 J

Kinetic energy is the energy possed by an object in motion. Mathematically, the kinetic energy can be expressed as follow:

KE = ½mv²

With the above formula, the kinetic energy of the crate can be obtained as follow:

Mass (m) = 10 KgVelocity (v) = 4 m/sKinetic energy (KE) =?

KE = ½mv²

KE = ½ × 10 × 4²

KE = 5 × 16

KE = 80 J

Therefore, the kinetic energy of the crate is 80 J

Learn more about kinetic energy: https://brainly.com/question/14449170

what is the definition for volume and density ​

Answers

Answer:

volume :: is the level at which something is heard or the amount of space that something takes up.

Density :: is a measure of mass per volume. The average density of an object equals its total mass divided by its total volume.

Answer:

The density, of a substance is its mass per unit volume. The symbol most often used for density is ρ, although the Latin letter D can also be used. Mathematically, density is defined as mass divided by volume: {\displaystyle \rho ={\frac {m}{V}}} where ρ is the density, m is the mass, and V is the volume

why is it less air pressure up in the sky and why does it affect our ears

Answers

Answer:

When you in a airplane you are in high altitude and thats where air density drops. Thats where ear pops come from.

Explanation:

what are the variables that affect the force of gravity?

Answers

Answer:

Mass and distance.

Explanation:

The force of gravity depends directly upon the masses of the two objects, and inversely on the square of the distance between them.

1. Apply a constant force of 50 N directed to the right of the 50 kg Box. (2 pts)
Hypothesis:?
Conclusion: ?

Answers

As the box is moving with a constant velocity, the two forces acting on the box are canceling each other.

Then   friction force = 80 Newtons              but in the opposite direction.

Friction force =  Mu  * Normal force exerted by ground  =  Mu * weight of box

So we find Mu.

Mu = coefficient of friction between box and horizontal surface

          = Force of friction / weight  =  80 / 50 * 9.81 = 0.163

When an identical box is placed on top, the force of friction is

      = Mu * total weight = 0.163 * (50+50) * 9.81 = 159.9 Newtons

Help please physics work

Answers

At any point along the track, the rollercoaster's mechanical energy is equal to the sum of its potential and kinetic energies,

M = P + K

and we assume the coaster's total mechanical energy is conserved throughout its motion along the track, so that M is the same at every point.

At the first point,

K + 75,000 J = 90,000 J   ⇒   K = 15,000 J

At the second point, since M = 90,000 J everywhere,

K + 45,000 J = M   ⇒   K = 45,000 J

At the third point,

K + 0 J = M   ⇒   K = 90,000 J

The same principles apply to the pendulum, so M = 5,100 J throughout its swing.

At the first point,

K + 4,500 J = 5,100 J   ⇒   K = 600 J

At the second point,

K + 0 J = M   ⇒   K = 5,100 J

At the third point,

600 J + P = M   ⇒   P = 4,500 J


What is the frequency of a wave with a wavelength of 15 m and a wavespeed of
300 m/s?

Answers

Answer: f=20 (i think)

Explanation:

all I did was divide 300 and 15.

300/15= 20

which term is defined by the interaction between two charged particles?

Answers

Answer: Electromagnetism

The term which is defined by the interaction between two charged particles is known as electromagnetism.

What is an electromagnet?

The study of charge and the fields and forces it generates is known as electromagnetism. Electromagnetism has two components: electricity and magnetism.

The special theory of relativity, developed by Albert Einstein in 1905, proved beyond a shadow of a doubt that both are components of the same reality. But in reality, magnetic and electric forces behave very differently and are modeled by various equations. Electric charges can produce forces whether they are stationary or moving. On the other hand, magnetic forces are only created by moving charges and only affect charges that are moving.

Thus, the term is known as electromagnetism.

To know more about electromagnet:

https://brainly.com/question/4248846

#SPJ5

AB
ca
The trough of a transverse wave is BEST shown by choice
es - )
8
8

Answers

Answer:

bro the way you worded it makes no since

name an instrument that is used to measure atmospheric pressure

Answers

Answer:

Barometer also called barometric pressure.

Answer:

A barometer

Explanation:

There are two types of barometers;

Mercury barometerAneroid barometer

[tex]{}[/tex]

what is the static friction force and kinetic friction for the image

Answers

According to the plot, static friction force has a maximum magnitude of around 3.0 N, and kinetic friction has a magnitude of about 1.5 N.

The plot appears to be telling you the force required to get the yellow block moving along the table. If one applies less than 3.0 N of force, the block remains motionless. But as soon as it starts to slide, one need only apply 1.5 N of force to keep it moving (presumably at a constant speed).

Other Questions
2. What does substrate-level phosphorylation involve?a. the direct formation of ATP by energy released during chemical reactionsb. the formation of ATP by the flow of protons through a membrane protein channelc. the formation of ATP by the addition of oxygend. all of the above Which expression has the greatest value when c = 7? 12 - 2C 0R C - 5please show working Find the amount that results from a $900 investment invested at 7% interest,compounded continuously, after 4 years. Michael has 13 dollars in his wallet. His father gives him his allowance for the week. Now Michael has 18 dollars. How many dollars did Michael's father give him? Please solve on same Kind of coordinate plane. Thank you! 2. How did the French position threaten the American colonists? Which type of chlorophyll is rare in xanthophyceae and is only determine its two genera How do you work out the problem x+3=4+x How are the western and eastern parts of the Brazilian highlands alike? Can someone plz help me? :( Which expression is equivalent to [(2a-3b4)2(3a5b)-2]-1 ? Assume a =/ 0, b =/ 0 1cm16 cmDiagram NOTaccurately drawnScm11 cm9 cm| 6cm18 cmThe diagram shows a shape.All of its corners are right angles.Work out the area of the shape. A. y = 2xB. y = x 2C. y = x 1D. y = x + 1 (2,170), (5,365) slope What is the difference between the type of smog experiences by cities in the Eastern United States and that found in Southern California? A student wants to test for the concentration of food dye FD&C Yellow #5 (Tartrazine) in a yellow Starburst candy. First, the student must prepare standard solutions for the calibration curve. The student has a stock solution of FD&C Yellow #5; the concentration is 0.1140 M. The student takes 6.50mL of the stock solution and dispenses it into a 50.0mL volumetric flask. The flask is then diluted to volume with water. What is the concentration of this standard solution? A construction company needs to remove 2 5/6 tons of dirt from a construction site. They can remove 3/10 tons of dirt each hour. What is the total amount of hours it will take to remove the dirt? One example whichshows prince shotoku is/is not worthy from the History Alive textbook is Andre lives in a neighborhood that has become known for drug activity. He notices that police cars have begun to slowly drive down his street at different intervals during the day. His father saysthat the police are trying to remind residents that they are around and will punish those who break the law. What law enforcement goal is this an example of? Need help fast worth 20 points Select the correct answer.Which set of absolute values is compared correctlyOA. 1-10] < |-5| < |17| < 151OB. 1-5| > |-10| > |-12| > |17||OC. |10| > |-15] > [-5| > 12||OD. |-101 < [12] < |-15| < |17||