you put 14.0 g of sodium chloride into a beaker and fill it to the 200 ml mark with deionized water. you then pour in 100.0 ml of 2.0 m silver nitrate. what mass (g) of precipitate will be produced if the reaction runs to completion?
34.21 g mass (g) of precipitate will be produced if the reaction runs to completion.
The chemical equation for the reaction between sodium chloride and silver nitrate is
[tex]NaCl + AgNO_3[/tex]→[tex]AgCl + NaNO_3[/tex]
The given amount of sodium chloride is 14.0 g
The volume of deionized water added is 200 ml
The volume of silver nitrate is 100 ml
The molarity of silver nitrate is 2.0 M
Let us first calculate the number of moles of silver nitrate that is used:2.0 M = 2.0 mol/L
Number of moles of silver nitrate used = 2.0 mol/L x 100/1000 L= 0.20 mol
Now, we can use mole-to-mole ratios to find the amount of precipitate (AgCl) that will be produced from the given amount of NaCl.
Number of moles of NaCl = 14.0 g / 58.44 g/mol = 0.239 mol
From the balanced chemical equation, we see that 1 mole of NaCl reacts with 1 mole of [tex]AgNO_3[/tex] to produce 1 mole of AgCl
Number of moles of AgCl produced = 0.239 mol
Therefore, the mass of AgCl produced is:
Mass of AgCl = 0.239 mol x 143.32 g/mol = 34.21 g
Hence, the mass of precipitate produced is 34.21 g.
Therefore, the mass of precipitate that will be produced when 14.0 g of sodium chloride is reacted with 100.0 mL of 2.0 M silver nitrate in 200 mL of deionized water is 34.21g.
To know more about Precipitate please visit :
https://brainly.com/question/30344509
#SPJ11
14) If 3 moles of methane reacts with oxygen to produce carbon dioxide and water,
what mass of water is produced?
Answer:
The balanced chemical equation for the combustion of methane (CH4) with oxygen (O2) is:
CH4 + 2O2 → CO2 + 2H2O
This equation tells us that for every mole of methane that reacts, we get 2 moles of water produced. So, for 3 moles of methane, we would get:
3 moles CH4 × (2 moles H2O / 1 mole CH4) = 6 moles H2O
Now we need to convert moles of water to mass. The molar mass of water (H2O) is 18.015 g/mol. So, the mass of water produced is:
6 moles H2O × 18.015 g/mol = 108.09 g
Therefore, if 3 moles of methane reacts with oxygen to produce carbon dioxide and water, 108.09 g of water is produced.
Explanation:
You are compiling the temperature profile of a lake, which requires taking temperature readings at different depths. You collect the following data:
What depth range does the epilimnion occupy in this lake?
a. 0 to 3
b. 8 to 12
The depth range of the epilimnion in this lake is most likely a. 0 to 3 meters. Option A is correct.
To determine the depth range of the epilimnion, we need to identify the layer of the lake where the temperature change is most rapid, which indicates the transition between the warm surface layer and the colder deep layer.
Looking at the temperature readings, we can see that there is a significant temperature difference between the surface layer (0-3 meters) and the layer below (4-7 meters).
However, the temperature change between 4-7 meters and 8-12 meters is not as dramatic, indicating that the transition between the warm surface layer and the colder deep layer occurs somewhere between 3 and 8 meters.
Hence, A. 0 to 3 is the correct option.
To know more about depth range here
https://brainly.com/question/29103133
#SPJ4
A 750.0 mL metal bulb is filled with 42.1 g of CH4 and 3.23 g of NH3. If the amount of pressure contributed by CH4 is 111.2 atm, then what is pressure due to NH3?
If the pressure contributed by CH4 is 111.2 atm, the pressure due to NH3 would be 109.1 atm.
Pressure calculationTo solve the problem, we can use the ideal gas law equation:
PV = nRT
where P is pressure, V is volume, n is the number of moles, R is the ideal gas constant, and T is temperature.
We need to find the pressure due to NH3, so let's start by finding the number of moles of each gas:
moles of CH4 = 42.1 g / (16.04 g/mol) = 2.623 molmoles of NH3 = 3.23 g / (17.03 g/mol) = 0.190 molNow, we can use the pressure contributed by CH4 to find the total pressure:
Ptotal = PCH4 + PNH3
111.2 atm = PCH4 + PNH3
Finally, we can solve for the pressure due to NH3:
PNH3 = Ptotal - PCH4PNH3 = 111.2 atm - 0.190 mol x (0.0821 L·atm/mol·K) x (298 K) / 0.750 LPNH3 = 109.1 atmTherefore, the pressure due to NH3 is 109.1 atm.
More on pressure can be found here: https://brainly.com/question/12977546
#SPJ1
CHEMISTRY QUESTION, PLEASE HELP!!!
Reaction B (attached); The change in enthalpy for the forward reaction is -91kJ/mol. (Energy is a product, flowing from the chemical reaction to the surroundings. )
The forward reaction for Reaction B (attached) is.
- endothermic
- exothermic
If Reaction B (attached) was ta equilibrium and then was heated ______ CH3OH would be present after the reaction adjusts to the new temperature.
- more
- less
- the same amount of
If Reaction B (attached) was at equilibrium and then the pressure in its container was increased, ____ CH3OH would be present after the reaction adjusts to the new pressure.
- more
- less
- the same amount of
If Reaction B (attached) was at equilibrium and then H2 was added, _____ CH3OH would be present after the reaction adjusts.
- more
- less
- the same amount of
If Reaction B (attached) was at equilibrium and then H2 was added, ____ CO would be present after the reaction adjusts.
- more
- less
- the same amount
The forward reaction for Reaction B is endothermic, as indicated by the negative change in enthalpy (-91 kJ/mol) for the forward reaction.
If Reaction B was at equilibrium and then was heated, the amount of CH₃OH would be less after the reaction adjusts to the new temperature. This is because the forward reaction is endothermic, meaning that an increase in temperature would shift the equilibrium towards the reactants side to counteract the increase in temperature.
If the pressure in the container of Reaction B was increased, the amount of CH₃OH would be more after the reaction adjusts to the new pressure. This is because the forward reaction produces fewer moles of gas than the reverse reaction, so increasing the pressure would shift the equilibrium towards the side with fewer moles of gas (the products side) to counteract the increase in pressure.
If H₂ was added to Reaction B at equilibrium, the amount of CH₃OH would be more after the reaction adjusts. This is because H₂ is a reactant in the reverse reaction, so adding more H₂ would shift the equilibrium towards the products side to counteract the increase in H₂.
If H₂ was added to Reaction B at equilibrium, the amount of CO would be less after the reaction adjusts. This is because CO is a product in the forward reaction, so adding more H₂ would shift the equilibrium towards the products side to counteract the increase in H₂, resulting in a decrease in CO.
To learn more about endothermic refer to:
brainly.com/question/23184814
#SPJ4
suppose you have a cache of radium, which has a half-life of approximately 1590 years. how long would you have to wait for 1/5 of it to disappear? you would have to wait years for 1/5 of the radium to disappear.
You would have to wait approximately 3,180 years for 1/5 of the radium to disappear. This is because the half-life of radium is approximately 805.4 years.
Suppose you have a cache of radium, which has a half-life of approximately 1590 years.
To determine how long you would have to wait for 1/5 of the radium to disappear, you need to use the formula for radioactive decay:
A=A₀(1/2)^(t/T)
where:
A₀ = initial amount of radium
A = amount of radium remaining after t years
T = half-life of radium
Firstly, note that 1/5 of the radium has disappeared, meaning that you have 4/5 of the radium remaining.
Therefore, A=4/5 A₀
We want to find t, the time it takes for 1/5 of the radium to disappear. This means that we need to find the time it takes for A to be reduced to 1/5
A₀ (or 2/5 A).2/5 A₀=A₀(1/2)^(t/T)2/5=(1/2)^(t/1590)
Taking the logarithm of both sides, we get:
t/1590=log(2/5)/log(1/2)
Solving for t, we get:
t = 805.4 years
Therefore, you would have to wait approximately 805.4 years for 1/5 of the radium to disappear.
To know more about Half-life please visit :
https://brainly.com/question/18630925
#SPJ11
mole to mass equation
Answer:
n (moles) = m (mass) / M (molar mass)
Explanation:
divide the mass by the molar mass, and you have your answer
What volume of a 3. 00 M glucose stock solution is necessary to prepare 2500 mL of 0. 400 M solution
Answer:333.3333 mL or 333mL
Explanation:
M1V1 = M2 V2
M1= 3.00 M
V2= 2500 ml
M2= 0.400M
V1= solving for
V1= M2V2/M1
0.400 X 2500 / 3.00 =
this diagram shows rock formations forming. which statement describes one or both formations
Answer:
c
Explanation:
formation is an igneous rock
Which process occurred when the water droplets formed on the grass? Choose the correct answer. Responses deposition deposition sublimation sublimation evaporation evaporation condensation condensation Skip to navigation
Answer:
Condensation is the process that took place when the water droplets formed on the grass.
Explanation:
Condensation is the process that took place when the water droplets formed on the grass. This occurs when airborne water vapour meets a colder surface, like the grass blades in the morning, and transforms into liquid form, generating tiny water droplets on the surface.
WILL GIVE BRAINLIEST!! PLS HELP!!!
Answer:
Thermal energy is the sum of the kinetic and potential energy of all the atoms in an object or substance.
(This statement is true for ideal gases, but for solids and liquids, thermal energy also includes the energy associated with intermolecular forces.)
PLEASE HELP!!!
How many particles Fe2O3 will produce in an aqueous solution (in water).
Question 11 options:
2
3
4
5
Hydrolysis occurs when Fe2O3 is dissolved in water, resulting in the formation of Fe(OH)3 and H+ ions. For every Fe in Fe2O3, there are 1.5 O. Thus, the iron content of Fe2O3 is reduced.
An aqueous solution is what?Water in the liquid state serves as the solvent in an aqueous solution. In other words, water molecules surround and integrate solute (dissolved) ions and molecules into their web of bonds. Following that, the dissolved species dispersed all over the water.
Why is water referred to as an aqueous solution?Aqueous solutions are made up of water and one or more dissolved materials. Solids, gases, or other liquids can all dissolve in an aqueous solution.
To know more about Hydrolysis visit:-
brainly.com/question/10840252
#SPJ1
Question:
How Many Particles Fe2O3 Will Produce In An Aqueous Solution (In Water).
A solution is prepared by dissolving 0. 23 mol of nitrous acid and 0. 27 mol of sodium nitrite in water sufficient to yield 1. 00 L of solution. The addition of 0. 05 mol of HCl to this buffer solution causes the pH to drop slightly. The pH does not decrease drastically because the HCl reacts with the __________ present in the buffer solution. The Ka of nitrous acid is 1. 36 × 10-3. A) H2OB) H3O+C) nitrite ionD) nitrous acidE) This is a buffer solution: the pH does not change upon addition of acid or base
The pH does not decrease drastically because the HCl reacts with the nitrite ion present in the buffer solution is: C) nitrite ion.
What is nitrous acid (HNO2) used for?In this case, nitrous acid (HNO2) and sodium nitrite (NaNO2) are used to prepare the buffer solution. The nitrous acid is a weak acid, and the nitrite ion (NO2-) is its conjugate base. The presence of both the weak acid and its conjugate base makes this solution a buffer solution.
When a small amount of HCl is added to the buffer solution, it reacts with the nitrite ion present in the solution according to the following equation:
HCl + NO2- -> HNO2 + Cl-
The HCl donates a proton to the nitrite ion, forming nitrous acid and chloride ion. This reaction consumes some of the added HCl, which prevents the pH from decreasing drastically.
Therefore, the correct answer is option C) nitrite ion.
Learn more about nitrite ion here:https://brainly.com/question/12101971
#SPJ1
the reaction between glucose, c6h12o6, and oxygen produces carbon dioxide and water. write a balanced equation for the reaction and use it to calculate the maxium mass of water that can be produced in a reaction between 1 mol of each reactant.
The maximum mass of water that can be produced in a reaction between 1 mol of glucose and 1 mol of oxygen is 18.015 g
Let's find out step-by-step:
The balanced equation for the reaction between glucose (C₆H₁₂O₆) and oxygen (O₂) to produce carbon dioxide (CO₂) and water (H₂O) is:
C₆H₁₂O₆ + 6O₂ → 6CO₂ + 6H₂O
We first need to identify the limiting reagent to calculate the maximum mass of water produced in a reaction between 1 mol of each reactant. Since there is 1 mol of glucose and 1 mol of oxygen, we can calculate how many moles of oxygen are required for 1 mol of glucose:
1 mol C₆H₁₂O₆ × (6 mol O₂ / 1 mol C₆H₁₂O₆) = 6 mol O₂
Since we only have 1 mol of oxygen available, oxygen is the limiting reagent in this reaction. Now, we can calculate the moles of water produced based on the stoichiometry of the balanced equation:
1 mol O₂ × (6 mol H₂O / 6 mol O₂) = 1 mol H₂O
Finally, we can calculate the maximum mass of water produced by multiplying the moles of water by its molar mass (18.015 g/mol):
1 mol H₂O × 18.015 g/mol = 18.015 g
So, the maximum mass of water produced in a reaction between 1 mol of glucose and 1 mol of oxygen is 18.015 g.
Learn more about limiting agents: What is limiting reagent? https://brainly.com/question/26905271
#SPJ11
Ca + 2H2O → Ca(OH)2 + H2.
How many moles of H2O are needed to exactly react with 2. 0 moles of Ca?
Answer:
The balanced chemical equation shows that 1 mole of Ca reacts with 2 moles of H2O to produce 1 mole of Ca(OH)2 and 1 mole of H2.
Therefore, to react with 2.0 moles of Ca, we need 2.0 moles of Ca x (2 moles H2O / 1 mole Ca) = 4.0 moles of H2O.
So, 4.0 moles of H2O are needed to exactly react with 2.0 moles of Ca.
Carbon NMR spectroscopy produces a spectrum of Choose... The number of carbon signals in the spectrum corre only carbon-13 nuclei only carbon-12 nuclei Choose.. in the mol all carbon nuclei In most carbon NMR spectra, the carbon signals appear as Choose... in a sample Carbon NMR spectroscopy produces a spectrum of Choose.. The number of carbon signals in the spectrum corresponds to the number of ✓ Choose... in the molecule. all the carbons unique carbon environments signals appear as Choose... symmetrical carbon environments in a sample Carbon NMR spectroscopy produces a spectrum of Choose... The number of carbon signals in the spectrum corresponds to the number of Choose... in the molecule. In most carbon NMR spectra, the carbon signals appear as Choose... quartet peaks doublet peaks singlet peaks Consider the structure of toluene. CHE peaks. The methyl peak will appear The carbon NMR of toluene should have v Choose... 5 Choose... the carbon 7 3 4 Consider the structure of toluene. CH3 peaks. The methyl peak will appear The carbon NMR of toluene should have Choose... Choose... the carbons of the ring. further upfield than further downfield than in a similar location as
Carbon NMR spectroscopy is a powerful analytical tool for determining the number of unique carbons present in a molecule, as well as their respective chemical environments. By analyzing the quartet, doublet, and singlet peaks, scientists can identify unique carbon environments and the associated chemical structure of the molecule.
Carbon NMR spectroscopy produces a spectrum of signals that represent the unique chemical environment of each carbon atom in a molecule. The number of carbon signals in the spectrum corresponds to the number of carbons in the molecule, meaning all carbons will be detected in the NMR spectrum. In most carbon NMR spectra, the carbon signals appear as quartet, doublet, and singlet peaks, each of which represent different types of carbon environments.
For example, consider the structure of toluene. CH3 peaks. The methyl peak will appear further upfield than the carbons of the ring. This is because the methyl group has a more electronegative environment than the ring carbons due to the three hydrogens that are attached to the carbon, resulting in a higher electron density. As a result, the methyl peak will appear further upfield than the carbons of the ring.
Know more about NMR spectroscopy here:
https://brainly.com/question/28523860
#SPJ11
n experimental beer's law for the copper(ii) ions in solution at 814nm was determined to be if a solution has an absorbance of 0.929, what is the concentration of the solution?
The concentration of the solution is 7.02 × 10⁻⁴ mol/L.
The Beer-Lambert law or Beer's law states that the amount of light absorbed by a solution is directly proportional to the concentration of the absorbing material in the solution, the path length, and the absorption coefficient.
According to Beer's law,
A = εcl
where A is the absorbance, ε is the molar absorptivity, c is the concentration, and l is the path length.
Let's find the concentration of the solution from the given data using Beer's law.
A = εcl
0.929 = ε × c × l
Let's find the molar absorptivity (ε) from the data given.
Experimental beer's law for copper(ii) ions in solution at 814 nm was determined to be
ε = 1.32 × 10³ mol⁻¹ L cm⁻¹
From the data given, the path length is not mentioned.
Let's consider the path length as 1 cm.
So, l = 1 cm.
0.929 = (1.32 × 10³ mol⁻¹ L cm⁻¹) × c × 1 cmc
= 0.929/1.32 × 10³ mol/L
= 7.02 × 10⁻⁴ mol/L
The concentration of the solution is 7.02 × 10⁻⁴ mol/L.
To learn more about The Beer-Lambert law refer to:
https://brainly.com/question/30404288
#SPJ11
In this equation, 2mg + o2 arrow 2mgo, what is the subscript of the oxygen molecule?
The subscript of the oxygen molecule in the equation 2Mg + O2 → 2MgO is 2.
This means that two oxygen molecules (O2) are involved in the reaction, and they combine with two magnesium atoms (2Mg) to form two magnesium oxide molecules (2MgO). The subscript "2" in front of MgO indicates that two MgO molecules are formed as a result of the reaction. The equation 2Mg + O2 → 2MgO represents a combustion reaction in which magnesium (Mg) reacts with oxygen (O2) to produce magnesium oxide (MgO). This is an example of an exothermic reaction, which releases energy in the form of heat and light.
learn more about exothermic reaction here:
https://brainly.com/question/579952
#SPJ4
magnesium sulfate reacts with barium chloride according to the following balanced equation. how many moles of barium sulfate are formed from 0.0831 mol of magnesium sulfate?
Therefore, the number of moles of barium sulfate formed from 0.0831 mol of magnesium sulfate is equal to 0.0831 mol.
How does the body respond to magnesium sulphate?By possibly inhibiting calcium-mediated contraction, reducing acetylcholine release from neuromuscular junctions, and decreasing histamine-induced airway spasm, magnesium sulphate (MgSO4) can calm smooth muscles.
The balanced chemical equation for the reaction between magnesium sulfate and barium chloride is:
MgSO4 + BaCl2 → BaSO4 + MgCl2
According to the equation, one mole of magnesium sulfate (MgSO4) reacts with one mole of barium chloride (BaCl2) to produce one mole of barium sulfate (BaSO4).
So, 0.0831 mol of magnesium sulfate will produce 0.0831 mol of barium sulfate.
This is because the stoichiometric ratio of magnesium sulfate to barium sulfate is 1:1, which means that for every mole of magnesium sulfate that reacts, one mole of barium sulfate is produced.
To know more about moles visit:-
brainly.com/question/26416088
#SPJ1
hodah runs the sales team for a paper distributor. in order to help the sales team boost their numbers, hodah has devised a bonus system. for every new client that land, the team member recieves a $250 gift card. For every 10 pallets of paper they sell, they can take home a $100 gift card. The sales team is excited and hits their phones, attempting to pull in as many new clients and sales as possible. what kind of leadership theory would you say hodah subscribes to?
a. transactional theory
b. situational leadership theory
c. trait theory
d. contingency theory
Answer:
Based on the given scenario, Hodah's leadership style can be described as a transactional theory. This theory suggests that leaders provide rewards or punishments based on the performance of their followers. In this case, Hodah has devised a bonus system to motivate the sales team to perform better by providing them with incentives such as gift cards for every new client and pallets of paper sold. This approach focuses on providing rewards to motivate and improve performance.
To earn full credit for your answers, you must show the appropriate formula, the correct substitutions , and your answer including the correct units
A pack of 51 wolves has 15 births and 8 deaths. What is the growth rate for this wolf pack?
To calculate the growth rate of the wolf pack, we need to find the difference between the birth rate and death rate and divide that by the total wolf population. Therefore, the growth rate of the wolf pack is 0.27%.
Do deaths factor into the growth rate?The difference between births less deaths and the difference between immigrants and emigrants in a given country, territory, or geographic area at a given year is what is used to describe the annual increase in population size.
Growth rate = (birth rate - death rate) / total population
Birth rate = 15/51 = 0.294
Death rate = 8/51 = 0.157
Total population = 51
Growth rate = (0.294 - 0.157) / 51 = 0.137 / 51 = 0.0027 or 0.27%
To know more about birth rate visit:-
brainly.com/question/626780
#SPJ1
How much heat will be transferred when 0. 54g of sulfur reacts with 0. 54g of oxygen to produce
sulfur trioxide according to the following reaction:
2 S +3 02 +2 SO3 + 790kJ
The amount of heat transferred would be -8.85 kJ.
Heat transferTo calculate the heat transferred, we need to first determine the limiting reactant, which is the reactant that is completely consumed in the reaction. This will determine the amount of product that can be formed and hence the amount of heat released.
We start by calculating the moles of sulfur and oxygen:
Moles of sulfur = 0.54 g / 32.06 g/mol = 0.0168 mol
Moles of oxygen = 0.54 g / 31.998 g/mol = 0.0169 mol
The balanced equation shows that 2 moles of sulfur react with 3 moles of oxygen to produce 2 moles of sulfur trioxide. So, the ratio of moles of sulfur to oxygen in the reaction is 2:3. Since the ratio of moles of sulfur to oxygen in the reactants is less than 2:3, oxygen is the limiting reactant.
The amount of sulfur trioxide produced can be calculated using the mole ratio from the balanced equation:
Moles of sulfur trioxide produced = 0.0169 mol * (2 mol SO3 / 3 mol O2) = 0.0112 mol
The heat transferred in the reaction can be calculated using the heat of reaction per mole of sulfur trioxide:
Heat transferred = 0.0112 mol * (-790 kJ/mol) = -8.85 kJ
More on heat transfer can be found here: https://brainly.com/question/13433948
#SPJ1
How many chlorine atoms are there in 2 molecules of CCl^5
The number of chlorine atoms present in 2 molecules of CCl₄ is 4.82×10²⁴ atoms
How do I determine the number of chlorine atoms?We'll begin by obtaining the mole of chlorine, Cl present in 2 molecules of CCl₄. This is shown below:
1 molecule of CCl₄ contains 4 moles of Cl
Therefore,
2 molecule of CCl₄ will contain = 2 × 4 = 8 moles of Cl
Finally, we shall determine the number of chlorine atoms present in the compound. Details below:
Number of mole of Cl = 8 molesNumber of chlorine atoms =?1 mole of Cl = 6.02×10²³ atoms
Therefore,
8 moles of Cl = (8 mole × 6.02×10²³ atoms) / 1 mole
8.1 moles of Li = 4.82×10²⁴ atoms
Thus, we can conclude that the number of chlorine atoms is 4.82×10²⁴ atoms
Learn more about number of atoms:
brainly.com/question/15488332
#SPJ1
Complete question:
How many chlorine atoms are there in 2 molecules of CCl₄
2. Substitution reactions can require a catalyst to be feasible. The reaction represented by the
following equation is heated to maximize the percent yield.
C2H6(8) + Cl2(g) + energy c HCl(l) + HCI()
a. Should a high or low temperature be maintained?
b. Should a high or low pressure be used?
c. Should the HCl gas be allowed to escape into another container?
Substitution reactions can require a catalyst to be feasible. (a). A high temperature should be maintained in order to maximize the percent yield of the substitution reaction.; (b). A high pressure should be used in order to maximize the percent yield of the substitution reaction. ; The HCl gas should not be allowed to escape into another container
The reaction represented by the following equation is heated to maximize the percent yield.
C2H6(8) + Cl2(g) + energy c HCl(l) + HCI()
a. To maximise the percent yield of the substitution reaction, a high temperature should be maintained. This is because increasing the temperature increases the kinetic energy of the molecules, allowing them to move faster and collide more frequently. This leads to an increased rate of reaction and a higher percent yield.
b. To maximise the percent yield of the substitution reaction, use a high pressure. This is because increasing the pressure increases the concentration of the reactants, which leads to more frequent collisions between the molecules and an increased rate of reaction.
c. Allowing the HCl gas to escape into another container is not permitted. This is because the HCl gas is a product of the reaction and removing it from the reaction vessel will decrease the yield of the reaction. Instead, the HCl gas should be kept in the same container as the reactants in order to maximize the percent yield of the substitution reaction.
For more question on Substitution reactions click on
https://brainly.com/question/10143438
#SPJ11
How useful are the company's claims?
The allegations are unfounded and perhaps pseudoscientific. Because to the fact that Jewels only come into contact with the skin's surface, they are not extremely beneficial. The ions cannot enter the human body.
What significance do product promises have?In other words, product claims might highlight practical advantages, point out emotional connections, foster trust, or even draw parallels with rival products on the market. These are a few illustrations of various product claims: manufactured using fresh produce and fruits. 100% natural.
How can Ions absorbed through our human skins?We discovered that human skin is permeable to ions such as magnesium, calcium, sulphate, and nitrate in vitro at amounts seen in the atmospheric fallout in two separate polluted regions of Poland.
To know more about ions visit-
https://brainly.com/question/3110170
#SPJ1
PLEASE HELP!!
Infant Tylenol contains 0.16 g of acetaminophen (C8H9NO2) in every 5 mL of medicine. What is the Molarity of Tylenol?
Question 6 options:
32 M
0.21 M
0.0002 M
0.32 M
The molarity of Tylenol is 0.21 M, rounded to two significant figures. Hence, the correct option is (B) i.e. 0.21 M.
To find the molarity of Tylenol, we need to know the number of moles of acetaminophen present in 5 mL of medicine.
First, let's calculate the molecular weight of acetaminophen:
C = 12.011 g/mol x 8 = 96.088 g/mol
H = 1.008 g/mol x 9 = 9.072 g/mol
N = 14.007 g/mol x 1 = 14.007 g/mol
O = 15.999 g/mol x 2 = 31.998 g/mol
Total molecular weight = 96.088 g/mol + 9.072 g/mol + 14.007 g/mol + 31.998 g/mol = 151.165 g/mol
Next, we can use the given mass of acetaminophen in 5 mL of medicine to calculate the number of moles:
0.16 g acetaminophen x (1 mol / 151.165 g) = 0.001058 mol
Finally, we can use the definition of molarity to calculate the molarity of Tylenol:
Molarity = moles of solute / volume of solution in liters
Since we have 0.001058 moles of acetaminophen in 5 mL of medicine, which is equivalent to 0.005 L of solution, we can calculate the molarity as:
Molarity = 0.001058 mol / 0.005 L = 0.2116 M
To know more about molarity please refer: brainly.com/question/8732513
#SPJ1
how to calculate equilibrium concentration from initial concentration without kc with acids and bases
We can determine the equilibrium concentration when we are given the initial concentration and reaction of an acid or base. In the given reaction,
HA is an acid that dissociates in water to form its conjugate base A− and a hydronium ion H3O+.
HA(aq) + H2O(l) ⇌ A−(aq) + H3O+(aq)
For any weak acid, the dissociation constant is defined as follows:
Ka = [A−][H3O+]/[HA]
We can determine the equilibrium concentration from the above formula by using the initial concentration.
Let’s consider a weak acid HA with an initial concentration of [HA]0.
It will form [A−] and [H3O+] at equilibrium.
If the degree of dissociation of the acid is x, then the concentration of [H3O+] at equilibrium will be [H3O+] = x, and the concentration of [A−] will be [A−] = x. And the concentration of [HA] at equilibrium will be [HA] = [HA]0 − x.
So, we can write the equilibrium expression for the dissociation of HA as:
Ka = [A−][H3O+]/[HA]Ka = x * x/([HA]0 − x)
By solving the above equation, we can obtain the value of x, which is the degree of dissociation of the acid.
At equilibrium, the equilibrium concentration of HA is [HA] = [HA]0 − x. The equilibrium concentration of A− is [A−] = x. The equilibrium concentration of H3O+ is [H3O+] = x. Thus, we can determine the equilibrium concentration from the initial concentration of a weak acid or base without using the equilibrium constant Kc.
#SPJ11
Learn more about equilibrium: What is true of a reaction that has reached equilibrium? https://brainly.com/question/2051941
Grain Alcohol (C2H5OH) can be produced by the fermentation of glucose. If 125g of alcohol is obtained from the fermentation of .511 kg of glucose, what is the percent yield?
A solution is made using 145. 7 g of water (MM = 18. 02 g/mol) and 120. 0 g of ethanol (MM = 46. 07 g/mol). What is the mole fraction of the water in the solution?
Mole fraction of the water in the solution made using 145.7 g of water and 120.0 g of ethanol is 0.7564 mole.
Mass of water = 145.7 g
molar mass of water = 18.02 g/mole
Number of moles = mass ÷ molar mass
= 145.7 g ÷ 18.02 g/mole
= 8.085 mole
mass of ethanol = 120 g
molar mass of ethanol = 46.07 g/mole
Number of moles = mass ÷ molar mass
= 120 g ÷ 46.07 g/mole
= 2.6047 mole
Total number of moles = moles of water + moles of ethanol
= 8.085 mole + 2.6047 mole
= 10.6897 mole
The term mole fraction is also known as molar fraction. It is defined as unit of the amount of a constituent divided by the total amount of all constituents in a mixture.
Mole fraction of water = moles of water ÷ Total number of moles
= 8.085 mole ÷ 10.6897 mole
= 0.756335
= 0.7564 mole approximately.
To learn more about Mole fraction
https://brainly.com/question/14783710
#SPJ4
Most of the volume of an atom is taken up by the ________ , and most of the mass of an atom is found in the _______.
A. Nucleus; electron clouds
B. Nucleus; nucleus
C. Electron clouds; nucleus
Most of the volume of an atom is taken up by the Electron clouds, and most of the mass of an atom is found in the nucleus.
Most of the volume of an atom is taken up by the electron clouds. This is because electrons occupy the space surrounding the nucleus in orbitals and they have a relatively large amount of space between them. The electron clouds represent the region in which electrons are likely to be found at any given time.
Most of the mass of an atom is found in the nucleus. The nucleus is made up of protons and neutrons, which have a much larger mass compared to electrons. Although the nucleus is much smaller in size compared to the electron clouds, it contains almost all of the mass of an atom.
To learn more about atom refer to:
brainly.com/question/30898688
#SPJ4