a satellite in a circular orbit rotates around the earth every 120 minutes. if the earths radius is 4000 miles at sea level, approximately what distance does the satellite travel in 40 minutes

The answer is (c) N north-east 76.

A vector quantity is a physical quantity with magnitude as well as direction. Vector quantities include things like displacement, velocity, acceleration, force, and momentum. A vector is typically represented graphically as an arrow, with the length of the arrow representing the magnitude and the direction of the arrow representing the vector's direction.

To find the vector V, we need to combine its X and Y components. Using the given values:

X component = 44 N east

Y component = 62 N north

We can represent this as a vector V with the notation V = (44 N east) + (62 N north).

To find the magnitude of the resultant R, we can use the formula R = √(Rx² + Ry²), where Rx and Ry are the X and Y components of the resultant vector. In this case:

Rx = 44 N east

Ry = 62 N north

So, R = √((44 N east)² + (62 N north)²) = √(1936 N² + 3844 N²) = √(5780 N²) = 76 N.

To know more about momentum, visit:

https://brainly.com/question/30487676

#SPJ1

As per the simulation, we can create a setup where the electric field is constant in both direction and magnitude by placing two charges of equal magnitude and opposite sign equidistant from the probe.

To achieve this, I selected two charges of equal magnitude (+10 nC and -10 nC) and placed them on the y-axis at a distance of 2 meters from the origin. The distance between the two charges was also 2 meters. By doing this, the electric field between the two charges was constant and equal in magnitude and opposite in direction, creating a region where the electric field is constant in both direction and magnitude.

To learn more about electric field refer to:

brainly.com/question/15800304

#SPJ4

(a) Your weight in Newtons is 560.7 N.

(b)  Your mass in kilograms is 57.12 kg.

(c) Your weight on the moon is 93.45 N.

a) To convert your weight from pounds to Newtons, we can use the conversion factor that 1 pound is equal to 4.45 Newtons.

Therefore, your weight in Newtons would be:

126 pounds x 4.45 Newtons/pound = 560.7 Newtons

b) To find your mass in kilograms, we can use the formula:

mass (kg) = weight (N) / acceleration due to gravity (m/s²)

The acceleration due to gravity on Earth is approximately 9.81 m/s². Therefore, your mass in kilograms would be:

mass (kg) = 560.7 N / 9.81 m/s² = 57.12 kg

c) The gravitational force between two objects depends on their masses and the distance between them. The gravitational force on the moon is about 1/6th the gravitational force on Earth.

Therefore, if you went to the moon, your weight would be about 1/6th of what it is on Earth.

Your weight on the moon would be:

126 pounds / 6 = 21 pounds

To convert this to Newtons, we can use the conversion factor:

1 pound = 4.45 Newtons

So your weight on the moon in Newtons would be:

21 pounds x 4.45 Newtons/pound = 93.45 Newtons

Learn more about weight here: https://brainly.com/question/28571689

#SPJ1

Answer:

19pr

Explanation:

Answer: The wavelength

Explanation:

The speed of a wave is calculated as the product of the frequency times the wavelength.

Hope this helps!!! :)

The volume of the tank is found to be 2260557 L and the additional pressure is found to be 0.85 atm.

A storage tank at STP contains 27. 8 kg of nitrogen N₂. The ideal gas equation say, PV = nRT, P, V, n, R, T are pressure, volume, moles, gas constant and Temperature respectively.

At STP, pressure is 1 atm and Temperature is 272 K.

Putting all the values,

1 x V = 27800/28(8.34)(273)

V = 2260557 Liters.

If the mass of the gas is 31.1 Kg the volume using the same equation will be 2528896.5 L.

If the temperature is constant but the volume is increases,

P₁V₁(Initially) = P₂V₂(Finally)

Putting values, we get,

1 x 2260557 = 2528896.5 x P₂

P₂ = 0.85 atm

So, the additional pressure will be 0.85 atm.

To know more about ideal gas equation, visit,

https://brainly.com/question/27870704

#SPJ4

Answer:

Explanation:

To calculate the pressure exerted on the floor, we need to use the formula:

pressure = force / area

where force is the weight of the elephant and area is the area of the foot in contact with the floor.

First, we need to convert the weight of the elephant from pounds to pounds-force (lbf), which is the force exerted by a mass due to gravity. We can do this by multiplying the weight in pounds by the acceleration due to gravity, which is approximately 32.2 ft/s²:

force = weight x acceleration due to gravity

= 6000 lb x 32.2 ft/s²

= 193200 lbf

Now we can calculate the pressure:

pressure = force / area

= 193200 lbf / 20 in²

≈ 9660 psi

Therefore, the pressure exerted on the floor by the elephant standing on one foot is approximately 9660 pounds per square inch (psi). This is a very high pressure and could cause damage to some types of flooring.

The maximum pressure the rectangular block can exert on a surface when placed on one of its faces on a horizontal surface is 317.71 Pa.

The maximum pressure the rectangular block can exert on a surface occurs when it is placed on one of its smallest faces.

To calculate the maximum pressure, we need to find the weight of the block, which is equal to its mass multiplied by the acceleration due to gravity. The mass of the block can be calculated as follows:

mass = density x volume

The volume of the block is:

volume = length x width x height

volume = 6.0 cm x 8.0 cm x 12.0 cm

volume = 576 cm³

Converting to meters:

volume = 0.006 m x 0.008 m x 0.12 m

volume = 5.76 x 10^-5 m³

Therefore, the mass of the block is:

mass = density x volume

mass = 2700 kg/m³ x 5.76 x 10^-5 m³

mass = 0.1555 kg

The weight of the block is:

weight = mass x acceleration due to gravity

weight = 0.1555 kg x 9.81 m/s²

weight = 1.526 N

When the block is placed on one of its smallest faces, the area of contact with the surface is:

area = length x width

area = 6.0 cm x 8.0 cm

area = 48 cm²

Converting to meters:

area = 0.06 m x 0.08 m

area = 0.0048 m²

Therefore, the maximum pressure the block can exert on the surface is:

pressure = weight / area

pressure = 1.526 N / 0.0048 m²

pressure = 317.71 Pa

Learn more about maximum pressure here: https://brainly.com/question/29596309

#SPJ1

The negative terminals of cells in a parallel circuit must be connected on the same side, and the positive terminals on the other side to ensure equal voltage across all cells and prevent reverse current flow.

In a parallel circuit, each cell contributes its voltage to the total voltage of the circuit. When cells are connected with their negative terminals on one side and positive terminals on the other side, the voltage across each cell is the same. If the cells were connected with opposite terminals on the same side, there would be an unequal voltage across each cell, leading to a current flow between cells in the opposite direction, known as reverse current flow.

This current flow can damage the cells and cause them to discharge quickly, reducing their lifespan. Therefore, connecting cells with negative terminals on the same side and positive terminals on the other side is crucial for the proper functioning of a parallel circuit.

To know more about parallel circuit, here

brainly.com/question/28444959

#SPJ4

The work input required is 180 J.

The formula gives the work input:

Work input = Force x Distance

In this instance, a force of 20 N is used, and 5 m is moved. As a result, the force's work is:

Work done by force = 20 N x 5 m = 100 J

A 400 N weight can be moved by the machine 20 cm (or 0.2 m) away.

Using the following formula, we can estimate the work performed by the machine:

Work done by machine = Load x Distance moved by the load

Work done by machine = 400 N x 0.2 m = 80 J

As a result, the amount of work needed to move the load with the machine is:

Work input = Work done by force + Work done by machine

Work input = 100 J + 80 J = 180 J

Therefore, the work input required is 180 J.

To learn more about Work done:

https://brainly.in/question/65556

It is possible for a body to move at a constant speed and still be in accelerating motion if its direction of motion is changing, i.e., it is undergoing circular motion. In circular motion, the direction of velocity of the body is changing constantly, resulting in a change in its acceleration even though its speed remains constant.

When a car is going around a circular track with constant speed, the centripetal force necessary for circular motion is provided by frictional force between the tires of the car and the surface of the track.

In circular motion, the direction of acceleration is towards the center of the circle, while the direction of net force is also towards the center of the circle. If the speed of an object is changing while rotating in a circular motion, the direction of net force remains towards the center of the circle, but the direction of acceleration may change depending on the direction of change in speed.

In this experiment, if the point on the arm hanging the bob and the pointer are not on the same vertical line, it would result in an error in the measurement of the period of oscillation of the bob. The period of oscillation is directly proportional to the length of the arm, and if the arm is not vertical, the effective length of the arm will change, resulting in an inaccurate measurement of the period.

If there is no spring attached and the bob is rotated at a constant speed, the centripetal force required for circular motion would be provided by the tension in the string. The tension in the string would act towards the center of the circle and provide the necessary force to keep the bob moving in a circular path.

Click the below link, to learn more about constant speed:

https://brainly.com/question/30551791

#SPJ11

Therefore, the resultant vector of the kite string has a magnitude of 168.5 meters and makes an angle of 65.5 degrees with the horizontal axis.

In physics, a vector is a quantity that has both magnitude and direction. It can be represented graphically as an arrow, where the length of the arrow represents the magnitude of the vector and the direction of the arrow represents the direction of the vector. Vectors can be added, subtracted, and multiplied using mathematical operations, such as the dot product and cross product. These operations allow us to manipulate and analyze vectors mathematically, which is useful for understanding and predicting the behavior of physical systems.

Here,

To find the resultant vector of the kite string, we can use the Pythagorean theorem and trigonometric functions. First, we can find the magnitude of the resultant vector using the Pythagorean theorem:

magnitude = √((72 m)² + (150 m)²)

magnitude = 168.5 m

Next, we can find the angle that the resultant vector makes with the horizontal axis using trigonometric functions.

tan(theta) = opposite / adjacent

tan(theta) = (150 m) / (72 m)

theta = tan⁻¹(150 m / 72 m)

theta = 65.5 degrees

To know more about vector,

https://brainly.com/question/30128095

#SPJ1

Answer:A resistor

Because Resistance is opposition to the flow of charges in a material. 

The method that Josh should use to separate a mixture of sulfur powder and iron filings is magnetic separation.

Magnetic Separation is a process that separates magnetic materials from non-magnetic materials. In this case, iron filings are magnetic, while sulfur powder is not. By using a magnet, Josh can easily separate the iron filings from the sulfur powder. To perform magnetic separation, Josh can place the mixture of sulfur powder and iron filings on a piece of filter paper and move a magnet underneath the paper. The iron filings will be attracted to the magnet and will stick to it, while the sulfur powder will remain on the filter paper. This method is effective because it is simple and does not require any chemicals or complex equipment. It is also a quick way to separate the two substances, which is important in a lab setting where time is limited. In summary, Josh should use magnetic separation to separate the mixture of sulfur powder and iron filings in his lab.

To learn more about Magnetic Separation click the link below

brainly.com/question/3106534

#SPJ4

Answer: D. Lever

Explanation: The biceps muscle provides the effort (force) and bends the forearm against the weight of the forearm and any weight that the hand might be holding. Many muscle and bone combinations in our bodies are of the Class 3 lever type.

Answer:

A period in the periodic table is a row of chemical elements

Explanation:

Don't forget to follow me

Answer:

Horizontal rows in a periodic table are called periods

Explanation:

For example: Na (sodium) is in the third period, hence it will have 3 shells

Hope you understand :)

please mark the brainliest

The resistance of a 90-cm length of copper wire with a 0. 020 -cm^2 cross-sectional area is  81 ohms.

The resistance of a wire is given by:

R = (rho * L) / A

where rho is the resistivity of the material, L is the length of the wire, and A is the cross-sectional area of the wire.

In this case, we are given that the length of the copper wire is 90 cm, the cross-sectional area is 0.020 cm^2, and the resistivity of copper is 1.8 x 10^-6 ohm-cm.

First, we need to convert the units of length and cross-sectional area to meters and square meters, respectively:

L = 90 cm = 0.9 m

A = 0.020 cm^2 = 2 x 10^-5 m^2

Now, we can substitute these values into the formula for resistance:

R = (rho * L) / A

R = (1.8 x 10^-6 ohm-cm * 0.9 m) / 2 x 10^-5 m^2

R = 81 ohms

Therefore, the resistance of the copper wire is 81 ohms.

For such more questions on resistance:

brainly.com/question/17055655

#SPJ11

Answer:

This description is likely referring to a graph that shows the velocity of a cart over time. The first part of the graph shows a positive slope, indicating that the velocity is increasing over time, and the second part of the graph shows a horizontal line, indicating that the velocity is constant. The fact that the slope of the first part of the graph is positive means that the cart is accelerating, since acceleration is defined as a change in velocity over time. The fact that the slope of the second part of the graph is zero means that the cart is not accelerating, since its velocity is not changing. The explanation suggests that the change in velocity is due to a fan being turned on and then off, which is causing the cart to accelerate and then move at a constant velocity.

The canyon is approximately 258 meters wide.

The speed of sound in air depends on the temperature, and we can use the formula:

v = 331.4 + 0.6T

where;

The speed of sound is:

v = 331.4 + 0.6(27.0)

v = 343.8 m/s

Let's call the distance to one wall "d". When the man fires the shot, the sound travels to the wall, reflects, and returns to the man.

The total distance traveled is 2d. The time it takes for the sound to travel this distance is:

t = 2d/v

Similarly, for the other wall, the total distance traveled is 2(D - d)

where;

The time it takes for the sound to travel this distance is:

t + 1.00 = 2(D - d)/v

We can solve these equations for d and D:

d = vt/2

D = (v/2)(t + 1.00)

Substituting in the values we have:

d = (343.8 m/s)(1.50 s)/2 = 257.85 m

D = (343.8 m/s/2)(1.50 s + 1.00 s) = 515.70 m

Therefore, the width of the canyon is:

D - d = 515.70 m - 257.85 m = 257.85 m

Learn more about canyon here: https://brainly.com/question/29677875

#SPJ1

Answer:

Does sugar make us sick? For his film Sugar Land , in theaters on Wednesday January 24, director Damon Gameau tested the effects of a high-sugar diet on his body, which was apparently in good health before the start of the experiment. According to a study published by the Harvard School of Public Health, people who consume one to two cans of sugary drinks a day are 26% more likely to develop type 2 diabetes than those who rarely consume them. This disease usually occurs in adults aged 40 and over, and affects more overweight people.

The Openfoodfacts site, which lists food products and their nutritional information, presents more than 1,300 references in its sugary drinks section , with an average sugar intake of 20 g per drink. We have selected 22 drinks, from the best-known sodas to refreshing drinks recently released on the French market, and we have measured the number of sugar cubes of caliber 4 (6 g per piece) that each of them contains. Find out how many pieces are hiding in our cans.

The magnitude of the force between the wires is 0.00156 N

The magnitude of the force between two parallel wires can be calculated using the formula:

F = (μ₀ * I₁ * I₂ * ℓ) / (2 * π * r)

where F is the force

, μ₀ is the permeability of free space (4π × 10⁻⁷ T·m/A),

I₁ and I₂ are the currents in the wires,

ℓ is the length of the shorter wire, and

r is the separation distance between the wires.

In this case, we have:

I₁ = I₂ = 128 A

ℓ = 35.0 m

r = 9.30 cm = 0.0930 m

So, the force between the wires is:

F = (4π × 10^⁻⁷ T·m/A) * (128 A)² * (35.0 m) / (2 * π * 0.0930 m)

F = 0.00156 N

Therefore, the magnitude of the force between the wires is 0.00156 N.

To learn more about magnetic force:

https://brainly.com/question/22113901

#SPJ11

The magnitude of the particle's acceleration is 0.202 m/s² and its direction is upward (in the positive z-direction).

The force on a moving charged particle in a magnetic field is given as follows:

F= q×v

Therefore, the acceleration of the charged particle is given as follows:

ā = q/m (v×B)

F = [tex]{(1.22*10^-8 C)(3.00*10^4 m/s)j^}*(1.63T)i^ + (0.980T)j^[/tex]

F= (3.66×10^-4 N)k^

F= ma

a=[tex]\frac{F}{m}[/tex] =  [tex]\frac{(3.66*10^-4 N)}{(1.81*10^-3 kg)}[/tex] = 0.202 m/s²

Acceleration is an important concept in physics and is used to describe the behavior of objects in motion. The magnitude of the acceleration is measured in units of meters per second squared (m/s²) in the International System of Units (SI).

An object accelerates when there is a net force acting upon it. This net force can be caused by many factors such as gravity, friction, or applied forces. If the net force is in the same direction as the object's velocity, the object will speed up; if it is in the opposite direction, the object will slow down. If the direction of the force is perpendicular to the direction of the velocity, the object's path will curve.

To learn more about Acceleration visit here:

brainly.com/question/3046924

#SPJ4

To calculate the overall heat transfer coefficient between two concentric pipes, we can use the following formula:

1/U = (r2 / k2) x ln(r2 / r1) + (1 / h1 x D1) + (ln(r3 / r2) / 2πk3L). Where: U is the overall heat transfer coefficient. r1 is the inner radius of the inner pipe. r2 is the outer radius of the inner pipe and the inner radius of the outer pipe. r3 is the outer radius of the outer pipe. k2 is the thermal conductivity of the material of the inner pipe. k3 is the thermal conductivity of the material of the outer pipe. h1 is the heat transfer coefficient on the inner pipe. D1 is the diameter of the inner pipe. L is the length of the pipe. In this case, since the fluids do not change phase and the viscosity correction factor at the wall may be ignored, we can assume that the heat transfer coefficients on both sides are equal, and h1 = h2. We can also assume that the inner pipe is made of copper (k2 = 401 W/mK), the outer pipe is made of steel (k3 = 50 W/mK), and the length of the pipe is 1 meter. Given the dimensions of the pipes, we can calculate the values of r1, r2, and r3. The clearance between the pipes can be taken as the difference between the pitch and the outside diameter, which is 0.005 m. Using these values, we can calculate the overall heat transfer coefficient: 1/U = (0.0105 / 401) x ln(0.0105 / 0.008) + (1 / h1 x 0.01) + (ln(0.014 / 0.0105) / (2π x 50 x 1)). Simplifying this equation and assuming that h1 = h2: U = 10.22 W/m²K. Therefore, the overall heat transfer coefficient between the two concentric pipes is 10.22 W/m²K.

To learn more about heat transfer coefficient click the link below

brainly.com/question/30833143

#SPJ4

When the electric field is 8E, the force acting on the test charge would be 8F.

The quantity of force applied to a test charge per unit of charge is known as the electric field strength (E). (q). As a result, E = F / q. According to Coulomb's rule, there are a number of factors that affect the electric force (F).

In line with the formula:

Force (F)=Charge x Electric Field

We can use this knowledge to determine the charge on the test charge if it experiences a force of 2F where the electric field is 2E:

2F = q × 2E

q = 2F / 2E

q = F / E

The force acting on the test charge where the electric field is 8E can now be determined using the charge number mentioned above:

Force (F') = Charge (q) x Electric Field (E')

F' = q × E'

F' = (F / E) × 8E

F' = 8F.

To know more about electric field visit:-

https://brainly.com/question/15800304

#SPJ1

The right hand rule for the direction of propagation of the electromagnetic waves is to point the fingers of your right hand toward the e vector, curl your fingers towards the b vector, and the thumb will point the direction of propagation. Therefore, the option c is correct.

Learn more about electromagnetic waves: https://brainly.com/question/25847009

#SPJ11

In the film Deep Impact (1998), the government kept the presence of the incoming comet a secret for only a few months.

Deep Impact is a 1998 American science-fiction disaster film directed by Mimi Leder, written by Bruce Joel Rubin and Michael Tolkin, and produced by Steven Spielberg's Amblin Entertainment. The movie's plot revolves around a comet that is on a collision course with Earth, and the film follows the attempts of scientists and political leaders to save the planet. Deep Impact starred Robert Duvall, Téa Leoni, Elijah Wood, Vanessa Redgrave, Maximilian Schell, and Morgan Freeman in the leading roles. Its production budget was estimated to be $75 million, and it grossed $349 million worldwide, making it the eighth-highest-grossing film of 1998.

Know more about leading roles

https://brainly.com/question/14724703

#SPJ11

A: The gravity between Earth and the spaceship decreases, B: Gravity obeys the inverse square law, C:   d=2; m=2; m=2,   d=1; m=1; m=2,   d=1; m=1;   m=1,   d=2; m=1; m=2,   d=2; m=1; m=1.

According to Newton's inverse square law, the force of gravity acting between any two objects is inversely equal to the square of the distance between their centres. Altering the separation distance (d) results in a modification in the force of gravity acting between the objects.

The third law of planetary motion, which states that "the square of the time taken for a planet to orbit the sun is directly proportional to the cube of the semi-major axis of the orbit," is where Newton actually got the idea for his inverse square law.

To know more about inverse square visit-

https://brainly.com/question/30404562

#SPJ1

Answer:

Explanation:

U = 0

V = ?

S = 13M

A = 9.8m/s²

[tex]v {}^{2} = u {}^{2} + 2as[/tex]

[tex]v { }^{2} = 0 + 2(9.8)(13) \\ v {}^{2} = 254.8 \\ v = 15.96m/s[/tex]

A laser used for surgery directs most of the light only toward the patient. But suppose that a small fraction of the light, 4.54 watts, leaks out and travels equally in all directions. A surgeon without protection should stay away from this laser at least: 9.05 meters.

The exposure to laser radiation poses potential hazards, including injury to the skin, eyes, or other parts of the body. The distance between the source of the laser radiation and the surgeon depends on the intensity of laser radiation, and the duration of the exposure.

The intensity of the laser beam is the power of the beam divided by the surface area perpendicular to the direction of the beam. The laser radiation to which a person is exposed is determined by the distance between the source and the person, as well as the degree of divergence of the beam.

As the distance between the person and the source increases, the amount of radiation decreases. Therefore, the intensity of radiation is inversely proportional to the square of the distance. Using the equation, Power = Intensity × Surface area, we can calculate the surface area.

We know that the power of the leaked laser light is 4.54 watts and the safe intensity of laser light is 0.0204 watts per meter squared. Therefore, the surface area is

Surface area = power/intensity

= 4.54/0.0204=222.549 meters squared.

The distance between the surgeon and the laser light can be calculated by using the formula

Surface area of a sphere = 4πr²

Where r is the radius of the sphere.

As the laser light travels equally in all directions, the surface area of the sphere is given as

Surface area of a sphere = 4πr²= 222.549 meters squared. We can find the radius r by dividing the surface area of the sphere by 4π. Therefore, [tex]r^{2} = 222.549/4\pi r^{2}= 17.747r = \sqrt{17.747r}  = 4.212 meters[/tex]

The surgeon without protection should stay at least 4.212 meters away from laser in meters.

To know more about laser refer here:

https://brainly.com/question/4869798#

#SPJ11