A projectile of mass 0.419 kg is shot from
a cannon, at height 6.2 m, as shown in the
figure, with an initial velocity v; having a
horizontal component of 6.7 m/s.
The projectile rises to a maximum height
of 1.6 m above the end of the cannon's barrel
and strikes the ground a horizontal distance
past the end of the cannon's barrel.
Find the magnitude of the initial vertical
velocity vector of the cannon-ball at the end
of the cannon's barrel. The acceleration of
gravity is 9.8 m/s².

Answer:

An electromagnetic wave with a wavelength of 4 x 10^-11 meters is in the X-ray band of the electromagnetic spectrum.

The electromagnetic spectrum is the range of all types of electromagnetic radiation, arranged according to wavelength or frequency. The different bands of the electromagnetic spectrum include:

radio waves

microwaves

infrared

visible light

ultraviolet

X-rays

gamma rays

X-rays have a wavelength range of around 10^-11 to 10^-8 meters. Therefore, the wavelength of 4 x 10^-11 meters falls within this range and is classified as an X-ray.

The thermometer scale used by the companion is based on the Celsius scale during the trip outside of the united states.

While travelling outside of the united states, we are accompanied  by the companion.

When we felt sick the companion used the thermometer scale to measure the temperature and the temperature that we get on the scale is 32.

On thinking logically, the scale is based on Celsius scale, the reason for this assumption is because the average human body temperature is 37 degrees Celsius only.

This would not have been the case in terms of the Fahrenheit scale or the Kelvin scale, They would have shown the value that are very high than 37.

To know more about thermometer scale, visit,

https://brainly.com/question/1327948

#SPJ4

The resistance of the circuit, given that the battery produces 61 V and a current of 19 A is 3.21 ohms

Ohm's law provides an established relationship between voltage and resistance. This is shown below:

Voltage (V) = Current (I) × resistance (R)

V = IR

Using the above formula, we can obtain the resistance of the circuit. This is illustrated below:

Voltage (V) = Current (I) × resistance (R)

61 = 19 × resistance

Divide both sides by 19

Resistance = 61 / 19

Resistance = 3.21 ohms

Thus, from the above calculation, we can conclude that the resistance is 3.21 ohms

Learn more about resistance:

https://brainly.com/question/23960560

#SPJ1

If pressure has to be decreased the height of the piston needs to be increased which will increase volume of gas eventually decreasing the pressure.

The thrust (perpendicular force on a surface) acting per unit area of a body is referred to as pressure. It can be stated mathematically as follows: Pascal is the SI unit of pressure (Pa). One Pascal is the amount of pressure one Newton of force applies to a square inch of space. Additionally, 1 P a = 1 N / m 2. In the International System of Units, pressure or stress is measured in pascals (Pa) (SI). It bears Blaise Pascal's name, a mathematician and physicist. Applied force of one newton (N) per square metre is equal to one pascal (P) (m2).

Learn more about the Pressure here: https://brainly.com/question/28012687

#SPJ4

Since the three rocks are thrown at the same speed, they all start off at the same speed. However, due to the forces of gravity, rock x and rock y will travel at different rates as they approach the earth.

Rock x, thrown vertically downward, will travel faster just before it touches the ground since it has had more time to accelerate because of gravity. Rock y, which is thrown vertically upward, will travel slower just before it touches the ground because it has had more time to slow down as a result of gravity. Gravity will have had no impact on the horizontally thrown rock z, therefore it will arrive at its destination with the same beginning speed. Gravity is a basic interaction in physics that causes all objects with mass or energy to attract one another. The force that pulls items toward the centre of a planet or other entity is called gravity.

learn more about gravity here:

https://brainly.com/question/12528243

#SPJ4

The magnitude of the potential difference between two points located 1.2 m apart in a uniform 640 n/c electric field, if a line between the points is parallel to the field.

The magnitude of the potential difference (V) between two points in an electric field is the amount of energy required to move a unit charge from one point to the other. It is typically measured in units of volts (V) and can be calculated using the equation: V = E * d, where E is the electric field strength and d is the distance between the points. The direction of the potential difference can be determined by the direction of the electric field. The equal to the product of the electric field strength and the distance between the points.

Formula: V = E * d

V = 640 n/c * 1.2 m = 768 V

So the potential difference is 768 V.

To learn more about magnitude of the potential difference here:

https://brainly.com/question/29216546

#SPJ4

According to the problem the net charge on the sphere would be 0.

Net charge is the total electrical charge of an object when the electrical charges of its protons and electrons are added together. It is calculated by subtracting the number of electrons from the number of protons. Positively charged objects have more protons than electrons, so they have a net positive charge.

When the rod is brought close to the sphere, electrons from the rod will flow to the sphere to balance out the charge, resulting in the sphere becoming negatively charged. When the sphere is grounded, the excess charge will flow to the ground and the sphere will become neutral again. After the ground is removed and the rod is taken away, the net charge on the sphere will again be 0.

To learn more about net charge
https://brainly.com/question/29980411
#SPJ4

The slit spacing is 0.00865 mm, if a light of 632.8 nm wavelength is aimed at two slit placed 0.8 m from a screen.

The wavelength of the helium-neon laser, λ = 632.8 nm = 6.328 × 10⁻⁷ m.

The order of the bright line, n = 1

The distance between the screen and the slit, D = 0.8 m

Distance of the first order bright line, y = 58.5 mm = 58.5 × 10⁻³ m

Let the slit spacing, = d

We know Y = nλD/d

d = nλD/Y

d = (1 × 6.328 × 10⁻⁷ × 0.8)/(58.5 × 10⁻³)

d = 8.65 × 10⁻⁶ m

or d = 0.00865 mm

To know more about wavelength, here

https://brainly.com/question/13533093

#SPJ4

The terms specific to the observer are e, f, and g. The ecliptic is the path that the Sun appears to follow across the sky throughout the year as viewed from Earth.

The horizon is an imaginary line that marks the point where the sky and the Earth's surface seem to meet. The zenith is an imaginary point directly overhead from the observer's location.

The celestial equator is an imaginary line that runs around the celestial sphere, dividing it into two hemispheres. The north celestial pole is the point directly above the observer's north horizon. The nadir is an imaginary point directly below the observer's location.

To know more about celestial sphere here

https://brainly.com/question/13196153

#SPJ4

(a) At a Lagrange point that is equally spaced from the Earth and the Moon, there is no net gravitational pull. (b) A single Lagrange point has a net force of zero due to two equal magnitude but opposing forces.

(a) At a location known as a Lagrange point, which is equidistant from both celestial bodies, the net gravitational pull of the Earth and the Moon on an item is zero. The mass of the object and the separation between Earth and Moon will determine the precise distance from the planet's core. (b) There are two locations where the Earth's and Moon's gravitational pulls are equal in strength, but only one location where the net pull is zero. This is due to the fact that although the forces' magnitudes are equivalent, their directions are in opposition, cancelling out at one place while adding up at the other. A Lagrange point is the location where there is no net gravitational force and a stable gravitational environment.

learn more about earth here:

https://brainly.com/question/12528243

#SPJ4

Therefore, the runways must be at least 193.21 meters long.

Due to that,

The airfield's initial speed is 0 and its final speed is 27.8 m/s.

The airfield is accelerating at a rate of 2 m/s

2 Runway length, where d is 150 meters

Let v' be the speed at which the aircraft reaches the necessary velocity for takeoff.

Using the third equation of motion, calculate v' as follows: v' = 2 ad v' 2*2*150

This speed is insufficient since the airfield needs to accelerate to at least 27.8 m/s before departure.

The runways must now be as long as v' = 24.49 m/s.

Therefore, the runways must be at least 193.21 meters long.

x = v²/2a

x = 193.21 m

Therefore, the runways must be at least 193.21 meters long.

To learn more about runways refer

https://brainly.com/question/15320779

#SPJ4

As the two socks are being spun too slowly, they are probably not going to stick together since the static charge would be too small to cause them to adhere.  

An imbalance in the charged particles of the thing is what causes static electricity, according to this definition. Until they are released or discharged, these charges remain on the object's surface. Static electricity is produced at the surface of the object as a result of these charges.

When a dryer's electricity supply is turned on, clothing spin faster and become stuck to one another, creating friction force between them. When the supply gets off, the spinner stopped its movement and the result is the static electricity that causes the socks to stuck together.

To know more about electricity:

https://brainly.com/question/11209255

#SPJ4

The Scientific Method Review name is HOMER and it stands for :

Observations and inquiries are a part of the scientific method. Based on these findings, scientists generate hypotheses, which are followed by controlled experiments for data collection and analysis. They can make judgments and formulate questions for future scientific research using this data.

The abbreviation HOMER is intended to cover all of the actions that should be taken while doing a scientific method review. The first step is to formulate a hypothesis.

The second step is to operationalize this theory and see whether it is viable. The results of this research must next be evaluated after being measured. The test should then be repeated, the findings revised, and a report should be written.

Find out more on the Scientific Method at https://brainly.com/question/24678471

#SPJ1

The process by which plants use light energy and convert it into biochemical energy is called photosynthesis.

Photosynthesis is a biological process that converts light energy from the sun into chemical energy stored in organic compounds (such as glucose), primarily through the actions of chlorophyll pigments found in plant chloroplasts. It occurs in plants, algae, and some bacteria and is the primary process that provides energy for life on Earth. Photosynthesis is a complex series of reactions that result in the production of glucose (sugar) and the release of oxygen as a by-product.

The process by which plants use light energy and convert it into biochemical energy is called photosynthesis. Photosynthesis is the process by which green plants, algae, and some bacteria convert light energy into chemical energy stored in organic molecules such as glucose. During photosynthesis, carbon dioxide from the air is taken in by the plant and combined with water to produce glucose and oxygen. The glucose produced through photosynthesis serves as the plant's food and energy source, while the oxygen is released into the atmosphere as a by-product. This process of photosynthesis plays a critical role in the carbon cycle, as it helps to remove carbon dioxide from the atmosphere and store it in the biosphere in the form of organic matter.

To know more about chlorophyll visit:

https://brainly.com/question/13500580

#SPJ4

Answer:

See below

Explanation:

Assuming they travel at the two velocities for equal amounts of time

The friction acting on the crate is zero. It is because the crate moves with a constant speed. The result is obtained by using the Newton's first law.

Newton's first law states that every object will remain at rest or keep constantly moving in a straight line unless an external force acts upon it.

The equation of Newton's first law can be expressed as

∑F = 0

A crate is pushed horizontally with

Find the friction acting on the crate!

According to Newton's first law, when an object moves at a constant speed, the net force would be zero.

∑F = 0

So, there is no acceleration of the object.

If there is no acceleration, then there is no friction force acting on the object. It means there is no friction acting on the crate.

Learn more about Newton's law here:

brainly.com/question/30163174

#SPJ4

The acceleration is equal to the acceleration of gravity multiplied by the sine of the angle for a frictionless incline of degree.

To learn more about acceleration refer to:

https://brainly.com/question/460763

#SPJ1

The force applied in the first case is 9200 N. In the second case, the force applied is less than the maximum force, so the groceries remain in the bag. The acceleration in the last case is 15 m/s².

A force is an influence in physics that can change the motion of an object. A force can cause a mass object to change its velocity, or accelerate. Intuitively, force can be described as a push or a pull. A force is a vector quantity because it has both magnitude and direction. The term "force" has a specific meaning in science. At this level, it is perfectly acceptable to refer to a force as a push or a pull. A force is not something that an object possesses or possesses. Another object applies a force to another. The concept of a force is not restricted to living or non-living things.
Here,

1. F=ma

m=4600 kg

a=2 m/s²

F=4600*2

=9200 N

2. Fₙ=250 N

m=20 kg

a=5m/s²

F=20*5

=100 N

F<Fₙ

Yes, The groceries will stay in bag.

4. Fₙ=30000 N

n=20

mₙ=75*20

=1500 kg

mₓ=500 kg

m=1500+500

=2000 kg

F=ma

30000=2000*a

a=15 m/s²

For first case, the force exerted is 9200 N. For second case, the force exerted is less than maximum force so the  groceries will stay in bag. For last case, the acceleration is 15 m/s².

To know more about force,

https://brainly.com/question/29044739

#SPJ1

The length of the string affects the pendulum's period such that the longer the length of the string, the longer the pendulum's period. T

How length of the string affects the time period of the oscillation?

To learn more about  time period refers to:

https://brainly.com/question/26449711

#SPJ1

The magnitude of the vector B is 42 units in the negative Y- direction, if it is added to a vector A of 24 units and giving resultant vector of 18 units.

Vector A magnitude, = 24 units

As it is perpendicular the x-axis so, x = 0

So the co-ordinate of the vector A head will be = (0, 24)

Resultant vector magnitude, = -18 units

As it is perpendicular the x-axis so, x = 0

So the co-ordinate of the vector A head will be, R = (0, -18)

A + B = R

B = R - A

B = -18 - 24

B = -42

The coordinate of the vector B, = (0, -42)

A negative sign indicates that the direction of the vector will be along the y-negative axis.

To know more about magnitude, here

https://brainly.com/question/14452091

#SPJ4

The electric field at distance r from a uniformly charged infinite sheet of charge density σ can be formulated as  σ/2ϵ

As per the Gauss's law, the total electric flux through a closed surface is 1/ϵo times the charge enclosed in the surface. It can be denoted as Ф= q/ϵo.

​The Electric flux expressed through a closed surface can be written as:

[tex]\int\limits^{} \, E.ds \\\int\limits^{} \, E.ds[/tex] =  q/ϵo.

Here, E is the electric field, q is the charge enclosed in the surface and ϵo can be written as the permittivity of the free space.

The electric field computed at distance r from a uniformly charged infinite sheet of charge density σ can be formulated as σ/2ϵ.

In the expression, ϵo is the absolute permittivity of the free space, E is the electric field and σ is surface charge density.

The field is uniform and does not depend on the distance from the plane sheet of charge.

Learn more about electric field:

brainly.com/question/28347684

#SPj4

The momentum of Sphere 1 is 14 kg m/s.

To learn more about The momentum of a Sphere refer to:

https://brainly.com/question/25121535

#SPJ1

Option D, molecules of the two gases separating to opposite ends of the balloon, can never occur spontaneously according to the second law of thermodynamics. This is because the law states that the entropy of a closed system will always increase over time, meaning that the gases would tend to become more mixed, not less.

The second law of thermodynamics is a fundamental principle in physics that states that entropy, or the measure of disorder and randomness in a system, will always increase over time. This means that energy will tend to flow from hot to cold, and that systems will tend to move towards a state of greater disorder, unless work is done to maintain or increase order. This law has important implications for the behavior of heat engines, the efficiency of energy conversions, and the fate of the universe.

To know more about Thermodynamics visit: https://brainly.com/question/13669873

#SPJ4

Molecules of the two gases separating to opposite ends of the balloon. So, correct option is D.

There are three laws that govern thermodynamics. They have a wide range of applications and can be helpful for all kinds of systems, provided that their operation involves the balance of energy and the transfer of matter. Examples of these applications go back to Einstein's theory of spontaneous emission at the turn of the 20th century, as well as the work being done right now on the thermodynamics of black holes.

The Thermodynamics' Zeroth Law. A relationship of equivalence is the thermodynamic equilibrium.

According to the Zeroth Law, two thermodynamic systems are in thermal equilibrium with one another if they are in thermal equilibrium with a third system.

Principle of Thermodynamics II (Entropy).

Any isolated thermodynamic system's total entropy (a measure of internal energy) tends to rise over time until it reaches a maximum value.

The Second Law of Thermodynamics puts out the idea that some processes have results that cannot be undone. For instance, once heat energy has been transformed into mechanical energy, it cannot be reversed; mechanical energy cannot be transformed back into heat once heat energy has been transformed into mechanical energy.

Absolute zero is the center of the Third Law of Thermodynamics.

Thermodynamics' Third Law (Absolute Zero Temperature).

All processes virtually stop as a system asymptotically approaches absolute zero in temperature, and the system's entropy asymptotically approaches a low value.

The Third Law of Thermodynamics supports the idea that a system loses all value and functionality when it reaches absolute zero.

According to the second law of thermodynamics, event D (molecules of the two gases separating to opposite ends of the balloon) can never occur spontaneously. This is because the law states that spontaneous processes tend to move towards a state of increased entropy or disorder, and the separation of gases would decrease the overall entropy of the system.

To know more about entropy visit:

https://brainly.com/question/13146879

#SPJ4

If a block is moving to the left at a constant velocity, one can conclude that the net force applied to the block is zero. Thus, the correct option for this question is C.

Net force may be defined as the addition of all those forces that are significantly acting on an object. It can accelerate a mass. Some other force acts on a body either at rest or in motion.

The principle of the net force is utilized in a system when there is a significant number of forces are applied to the object. If an object is moving with constant velocity, then its acceleration must be zero. This can best be revealed, then look at Newton's second law. If the acceleration is zero, then the net force must also be zero.

Therefore, if a block is moving to the left at a constant velocity, one can conclude that the net force applied to the block is zero. Thus, the correct option for this question is C.

To learn more about Net force, refer to the link:

https://brainly.com/question/12970081

#SPJ4

The answer to this question is b) fHe decreases.

When a pipe is stopped at one end, the frequency of the fundamental note is halved, resulting in a lower frequency of 280 Hz. This is because the pressure wave is reflected at the closed end, which reduces the length of the wave and therefore decreases the frequency. The equation used to calculate the frequency of a stopped pipe is fHe=v/2L, where v is the velocity of sound in air and L is the length of the pipe. Therefore, as the length of the pipe is reduced, the frequency of the fundamental note decreases.

To know more about fundamental frequency:

https://brainly.com/question/29980711

#SPJ4

Nuclear energy is often considered a clean energy source because it does not produce greenhouse gas emissions like carbon dioxide (CO2) during the generation of electricity.

Nuclear energy is the energy released by atomic nuclei as a result of nuclear reactions, either through natural processes like nuclear decay, or by the controlled release of energy through nuclear reactions, typically through nuclear fission or nuclear fusion. This energy is used to generate electricity in nuclear power plants, and also has other applications in military and medical fields.

Nuclear energy is often considered a clean energy source because it does not produce greenhouse gas emissions like carbon dioxide (CO2) during the generation of electricity. However, the production of nuclear fuel, including uranium mining and milling, can have significant environmental impacts. The disposal of nuclear waste also poses a challenge, as it remains radioactive for thousands of years and must be securely contained to protect the environment and public health. Additionally, the risk of nuclear accidents, although low, can have severe consequences for both the environment and human health. In summary, while nuclear energy is considered clean in terms of its operation, there are still significant environmental and safety concerns associated with its production and waste management.

To know more about radioactive visit:

https://brainly.com/question/30026438

#SPJ4

A ball undergoing a projectile motion of a basketball shot has two components of velocity, 1) horizontal component and 2) vertical component

When a ball undergoes a projectile motion at θ° angle, it possesses two components of velocity, Horizontal component = vcosθ and vertical component = vsinθ. Vertical components always subjected to acceleration due to gravity in downward direction, whereas horizontal component does not have any acceleration. So it remains constant throughout the whole journey.

Time taken by the ball to reach at height, T = (vsinθ)/g

Total time to return to the ground is 2T = 2vsinθ/g

Horizontal range  of the ball, R = vcosθ × 2T

= 2vsinθ(vcosθ)/g

= v²sin2θ/g

To know more about projectile motion here

https://brainly.com/question/11049671

#SPJ4

Total energy is the result of adding up all these energies. Multiple types of energy, including thermal, mechanical, kinetic, potential, electrical, magnetic, chemical, and nuclear energy, can exist in a system.

Energy is defined as the ability to "perform work," which is defined as the capacity to exert a force great enough to move an item. Although the definition is ambiguous, the idea behind it is actually fairly simple: electricity simply refers to the force that propels objects. There are two different types of potential energy.

The simplest way to define energy is as the capacity to operate. What moves and transforms things is energy. It comes in a variety of shapes and is everywhere. It takes energy to prepare food.

To know more about Energy visit:

brainly.com/question/1932868

#SPJ4

The image (i1) formed by the lens with a focal length of 40.0 cm is located 0.02 m to the right of the lens and has a height of 1.20 cm.

Lens is a curved piece of transparent material, typically made of glass or plastic, that is used to refract light in order to form an image.

a) The location and height of the image (i1) formed by the lens with a focal length of 40.0 cm can be determined using the lens equation.
1/f = 1/do + 1/di
Where f is the focal length, do is the object distance, and di is the image distance.
In this case,
f = 40cm
do = 50 cm
Solving for di, we get
1/di = 1/f – 1/do
= 1/40 – 1/50
= 0.04 – 0.02
= 0.02 m
Therefore, the image (i1) formed by the lens with a focal length of 40.0 cm is located 0.02 m to the right of the lens and has a height of 1.20 cm.

b) The location and height of the image (i2) produced by the second lens can be determined using the lens equation.
1/f = 1/do + 1/di
Where f is the focal length, do is the object distance, and di is the image distance.
In this case,
f = 60cm
do = 300 cm
Solving for di, we get
1/di = 1/f – 1/do
= 1/60 – 1/300
= 0.0167 – 0.0033
= 0.0134 m
Therefore, the image (i2) produced by the second lens is located 0.0134 m to the right of the lens and has a height of 0.60 cm.
This is the final image produced by the combination of lenses.

To learn more about lens
https://brainly.com/question/28039799
#SPJ4

It has been determined that the 31.8 kg mass experiences a net gravitational force of 1.129105 N from the two larger masses.

The absolute or relative direction or size of an object's motion in the sense of motion can be used to define magnitude. It is extensively utilized to convey something's size or scope. In physics, the term "magnitude" typically means "distance" or "quantity."

Take the right to be positive.  Sum of forces on the 31.8 kg mass:

∑F = GM₁m / r₁² − GM₂m / r₂²

∑F = G (M₁ − M₂) m / r²

∑F = (6.672×10⁻¹¹ N kg²/m²) (516 kg − 207 kg) (31.8 kg) / (0.482 m / 2)²

∑F = 1.129×10⁻⁵ N.

Repeating the same steps, the second part this time ∑F = 0 and we're solving for r.

∑F = GM₁m / r₁² − GM₂m / r₂²

0 = GM₁m / r₁² − GM₂m / r₂²

GM₁m / r₁² = GM₂m / r₂²

M₁ / r₁² = M₂ / r₂²

516 / r² = 207 / (0.482 − r)²

516 (0.482 − r)² = 207 r²

516 (0.232 − 0.964 r + r²) = 207 r²

119.9 − 497.4 r + 516 r² = 207 r²

119.9 − 497.4 r + 309 r² = 0

r = 0.295 or 1.315.

It is found that r can't be greater than 0.482, so r must be equal to 0.295 m.

Learn more about gravitational force:

brainly.com/question/27943482

#SPJ4