A plane flying through the air can be modeled like a particle. Which of the following forces should be included on the free body diagram?
a. the thrust from the engines
b. the friction of the air
c. the weight of the plane
d. the lift from the wings
e. the force connecting the wing to the plane

Answers

Answer 1

The push from the engines, air friction, the weight of the plane, the lift from the wings, and the force attaching the wing to the plane are the forces that need to be shown on the free body diagram

A free body diagram is a technique used to examine a particle's motion by taking into account all of the forces that are exerting pressure on it. The thrust from the engines, air friction, the weight of the plane, lift from the wings, and the force linking the wing to the plane should all be represented on the free body diagram when simulating a plane traveling through the air as a particle. The force moving the plane forward is the thrust from the engines. The force that the plane must overcome to move through the air is air friction. Gravity is dragging the plane down because of the weight of the aircraft.

Learn more about plane here-

https://brainly.com/question/29511090

#SPJ4


Related Questions

how many centimeters are there in a length 32.7 inches ? express your answer in centimeters to three significant figures. activate to select the appropriates template from the following choices. operate up and down arrow for selection and press enter to choose the input value typeactivate to select the appropriates symbol from the following choices. operate up and down arrow for selection and press enter to choose the input value type nothing cm request answer sometimes you will need to change units twice to get the final unit that you want. suppose that you know how to convert from centimeters to inches and from inches to feet. by doing both, in order, you can convert from centimeters to feet. part b suppose that a particular artillery piece has a range r

Answers

In a length of 32.7 inches, there are 83.058 cm.

Explain about the centimeters?

A centimetre is the unit of measurement for length in the metric system. One centimetre, which is equal to one hundredth of a metre, is denoted by the abbreviation "cm." Basically, 1 centimetre is equal to 0.01 metres, 10 millimetres, and 0.3937 inches.

An object's length is measured in centimetres, which are metric units of measurement. Cm is used to write it. Centimeters make up one metre. The length of a centimetre is 10 millimetres.

It is possible to refer to a centimeter as 10 millimeters. One centimeter about covers the width of a fingernail.

Inches should be multiplied by the conversion factor of 2.54.

So, 32.7 inches is 32.7 plus 2.54

= 83.1 580 millimeters

To learn more about centimeters refer to:

https://brainly.com/question/21386205

#SPJ4

what are you not allowed to do when building digital logic circuits? (multiple correct answers are possible. wrong answers will deduct points. group of answer choices

Answers

For the specified situation, the anticipated points are 5, 3.75, 2.5, 1.25, 0, and -1.25, respectively.

The area of mathematics known as probability is concerned with calculating the likelihood that a random event will occur. Any event's probability always falls inside the contiguous range [0,1] between 0 and 1. Probability values between 0 and 1 imply that an event will occur while values between 0 and 1 indicate that it won't. Due to that, there are five answers in all. Each accurate response earns 1 point, whereas each incorrect response earns 1/4 of a point. The following situations, Case 1, The responses are all accurate. The total number of points earned is therefore reported as 5 + 1 = 5. Case 2, One of the four options is incorrect.

Learn more about Probability here:

https://brainly.com/question/9364161

#SPJ4

Element-wise division: Convert pounds to kilograms Assign row array weightKilo with the corresponding weight in kilograms. Use the following conversion: kg = lb / 2. 2 Function Save Reset MATLAB DocumentationOpens in new tab function weightKilo = ConvertToKilo(weightPounds) % weightPounds: Row array of weights in pounds % Assign weightKilo with the corresponding weight in kilograms weightKilo = weightPounds; end 1 2 3 4 5 6 7 Code to call your function

Answers

Go to the Home tab and select NewScript or New Live Script to create a script or live script with local functions.

How should you use functions in a MATLAB script ?

Go to the Home tab and select NewScript or New Live Script to create a script or live script with local functions. Then paste the code into the file. After the script code, place any local functions at the end of the file.

Add at least one line of script before the local functions.

Function weight Kilo = Convert to Kilo (weight Pounds)

weight Pounds: array of lines with weights in pounds

weight Assign kilo from corresponding weight in kilogram

weight Kilo weight lbs/2.2 ; divides each element of the Pounds Weight array by 2.2.

End.

To learn more about function refer to:

brainly.com/question/25324400

#SPJ4

What does it mean when it says an unknown being has entered this world in Blox fruit?

Answers

An unknown being has appeared in this world..."

This message only appears on the 3rd sea. The raid boss Soul Reaper has been reborn.

What does the world mean?

The word "world" refers to all that is, the totality of reality or the totality of beings. Different realms have developed different ideas about the world of nature. While some ideas regard the world as one, others refer to "many worlds". "Some people see the world as one simple thing, while others see it as a complex system with many moving parts. The term "world" or "universe" in scientific Cosmology refers to "[t]he totality of all space and time; all that is, was, and will be".

Potential worlds, on the other hand, are described as complete and coherent ways that things in modality theories would have can.

To learn more about world refer to

brainly.com/question/1892495

#SPJ4

Select the correct answer. Carmela wants to take out a loan for a car. Which benefit will Carmela receive if she makes a down payment when she obtains the loan? A. A decrease in the total cost of the loan B. No penalties for late payments C. An increase in the loan term D. An increase in the principal amount

Answers

Answer:

A) a decrease in the total cost of the loan

Explanation:

0 shows a tank within a tank, each containing air. pressure gage a, which indicates pressure inside tank a, is located inside tank b and reads 5 psig (vacuum). the u-tube manometer connected to tank b contains water with a column length of 10 in. using data on the diagram, determine the absolute pressure of the air inside tank b and inside tank a, both in psia. the atmospheric pressure surrounding tank b is 14.7 psia. the acceleration of gravity is g

Answers

The acceleration of gravity is g = 32.2 ft/s2.

Why pressure gage a reads 5 psig (vacuum)?Absolute pressure of air inside Tank B = 14.7 psia + 5 psia = 19.7 psiaAbsolute pressure of air inside Tank A = 14.7 psia + 0.43 psia = 15.1 psia (Calculation: Pb = Patm + ρgh, where Pb = absolute pressure inside Tank B, Patm = atmospheric pressure, ρ = density of water, g = acceleration of gravity, and h = height of water column = 10 in. = 0.83 ft. Thus, Pb = 14.7 psia + (62.4 lb/ft3)(32.2 ft/s2)(0.83 ft) = 14.7 psia + 5 psia = 19.7 psia. Similarly, Pa = 14.7 psia + (62.4 lb/ft3)(32.2 ft/s2)(-0.43 ft) = 14.7 psia + (-0.43 psia) = 15.1 psia, where Pa = absolute pressure inside Tank A, and h = -0.43 ft = difference in water column heights.)The pressure gage a reads 5 psig (vacuum) because the pressure inside tank b is less than the atmospheric pressure surrounding tank b. Since the water in the U-tube manometer is in contact with the air inside tank b, the height of the water column is 10 in, which corresponds to a pressure difference of 10 in. Hg, or 5 psig. Therefore, the absolute pressure inside tank b is 14.7 psia – 5 psig = 9.7 psia, and the absolute pressure inside tank a is 9.7 psia + 5 psig = 14.7 psia. This is the same as the atmospheric pressure surrounding tank b.In summary, the pressure gage a reads 5 psig (vacuum) because the pressure inside tank b is lower than the atmospheric pressure surrounding it. This is indicated by the height of the water column in the U-tube manometer, which is 10 in, corresponding to a pressure difference of 10 in. Hg, or 5 psig. The absolute pressure inside tank b is 9.7 psia and inside tank a is 14.7 psia.

To learn more about the pressure gage a reads 5 psig (vacuum) refer to:

https://brainly.com/question/13178456

#SPJ4

Air inside Tank B is at an absolute pressure of 14.7 psia plus 5 psia, or 19.7 psiaAir inside Tank A is at a pressure of 15.1 psi, which is equal to 15.1 psi plus 14.7 psi.

Why does the pressure gauge read 5 psig (vacuum)?

The air pressure surrounding tank b is lower than the pressure inside tank b, the pressure gauge a reads 5 psig (vacuum). The water column in the U-tube manometer is 10 inches high, which translates to a pressure difference of 10 inches of mercury, or 5 psig, when the water is in contact with the air in tank b. As a result, the absolute pressure inside tank b is 14.7 psia minus 5 psig = 9.7 psia, whereas the absolute pressure inside tank an is 9.7 psia plus 5 psig = 14.7 psia. This is the same as the pressure in the air around tank b.

To learn more about pressure gauge refer to:

https://brainly.com/question/13292088

#SPJ4

Desiccant failures arise when the system is left open for long periods of time and the
desiccant:
absorbs too much moisture.
becomes to dusty and dirty.
dries out too much.
is exposed to sunlight.

Answers

Desiccant failures can occur when the system is left open for long periods of time, allowing the desiccant to absorb too much moisture,


What is Desiccant Failure?

Desiccant failure refers to the inability of a desiccant material to effectively remove moisture from a system.

This can happen due to a variety of reasons such as the desiccant being saturated with moisture, becoming clogged with dust or dirt, becoming too dry, or being exposed to UV radiation.

This can lead to issues such as corrosion, mold growth, and reduced efficiency of the system.

Read more about machine failure here:

https://brainly.com/question/24885567
#SPJ1

given string inputstr on one line and integer strindex on a second line, change the character at index strindex of inputstr to 'b'. ex: if the input is: eagle 0 then the output is: bagle note: assume the length of string inputstr is greater than strindex.

Answers

You can add code to the function Find Chars() that counts how many times the character "x" appears in the string "input String" and returns this count as the function's output.

In this version, each character in the string "input String" is iterated over using a for loop, and a conditional statement (if) is used to determine whether the current character is equal to "x." If so, one is added to the count. The function returns the final count as its output when the loop is finished. When called from the main function, this method should accurately count the number of times "x" appears in "input String" and return the result. You can add code to the function Find Chars() that counts how many times the character "x" appears in the string "input String" and returns this count as the function's output.

Learn more about Function here:

https://brainly.com/question/30031465

#SPJ4

take in a string from the user and split it into an array of single characters. split the list of characters into a list of lists where each inner list has 3 elements. notice that the last inner array may have fewer than 3 element

Answers

The split() method splits a string into an array of substrings. The split() method returns the new array. The split() method does not change the original string. If (" ") is used as separator, the string is split between words.

How do split a string into characters?

Following are the program in Java Programming language

import java. util.*; //import package.

public class Main //define class main

{

public static Array List<Character>to Character Array(String s) //define function  

{

Array List<Character> o b = new Array List<Character>(); //create Array List object.

for(char ch1: s.to Char Array())// iterating over the loop

{

ob. add(ch1); //add Character in list.

}

return o b; //return the object I. e return the value

}

public static void main(String arcs[]) // main method.

{

String str; // variable declaration.

int I; //define variable.

Scanner ob1 = new Scanner(System.in); //creating scanner class object.

System .out. print("Enter any string: "); //message

str = ob1.nextLine();//input value in str variable.

Array List<Character> ob2 = to Character Array(str); //create Array List reference variable and call to Character Array() function

System. out. print("Elements of the character array list: ");//message

for(I = 0;i<ob2.size();I++) //loop

{

Output:

Enter any string: Stony Brook

Elements of the character array list: S t o n y   B r o o k  

Explanation:

In the above java program firstly we import the  package. Then we define a class that is "Main". In this class we define a function that is "to Character Array()" function and pass a string variable that is "s". After that, we create an Array List class object that is "o b" and define a loop. The loop is used to take input value and return its value.Then we define a main function. In the main function, we define a variable that is "i" and "str".Finally  create an Array List object and use the loop for print inserted value with a separate of one space.

To learn more about string refers to;

https://brainly.com/question/13972449

#SPJ4

A car drives on a curved road that goes down a hill. The car's position is defined by the position vector,
r={?[30.0cos(?10.0t)]i+[30.0sin(?10.0t)]j?(Azt)k} ft
where Az=13.0ft/s. The image below shows the system projected onto the x–y plane. What are the car's velocity and acceleration vectors at this position?

Answers

For cars W and Z, the set of equations x=x0+v0xt+12axt2 and x=x0+v0xt+12axt2 could be used to determine where on the horizontal surface the two cars will collide.

Due to the fact that we know the automobiles will collide at the same moment, by solving for t in one equation and substituting the new expression for t into the other, all variables other than x will be known. A formula that connects two expressions with the equals sign to express the equality of the two is known as an equation. We will apply the equations X=X0+v0xt+12axt2 for car W and x=x0+v0xt+12axt2 for car Z to find the point on the horizontal surface where the two cars meet. The rationale is that we are aware that the two cars will collide at the same location and time.

Learn more about An equation here:

https://brainly.com/question/28768665

#SPJ4

Conider the following relational chema
Employee (empno, name, office, age)
Book (ibn, title, author, publiher)
Loan (empno, ibn, date)
Write the following querie in relational algebra.
• Find the name of employee who have borrowed a book Publihed by 1 McGraw-Hill?
• Find the name of employee who have borrowed all book Publihed by McGraw-Hill?
• Find the name of employee who have borrowed more than five different book publihed by McGraw-Hill?

Answers

Relational algebra is a procedural query language that consists of a set of operations used to manipulate and query data stored in a relational database.

The following queries in relational algebra:

1. σpublisher = “McGraw-Hill” (Book) ⨝ Loan ⨝ Employee (name)

2. σpublisher = “McGraw-Hill” (Book) ⨝ Loan ⨝ Employee (name) ⋈ Loan(empno)

3. σpublisher = “McGraw-Hill” (Book) ⨝ Loan ⨝ Employee (name) ⋈ Loan(empno) ⨝ σ Count(ibn) > 5 (Loan)

What is mean by relational algebra?

It is a formal language that uses mathematical notation and consists of a set of operations that act on one or more relations (tables) to produce new relations (tables). The operations include the usual set operations such as union, intersection, difference, and Cartesian product, as well as operations such as selection, projection, and join. Relational algebra is used to define the structure of a database, and to query and manipulate data stored in a database. The formal language is used to make it easier to understand and implement complex queries, as it allows for the expression of query logic in a more structured, logical form.

Relational algebra is useful for data manipulation, data exploration, and for expressing complex queries in a more structured way.

To learn more about relational algebra refer to:

brainly.com/question/10983796

#SPJ4

You are working with a database table that contains employee data. The table includes columns about employee location such as city, state, country, and postal_code. You want to retrieve the first 3 characters of each postal code. You decide to use the SUBSTR function to retrieve the first 3 characters of each postal code, and use the AS command to store the result in a new column called new_postal_code. You write the SQL query below. Add a statement to your SQL query that will retrieve the first 3 characters of each postal code and store the result in a new column as new_postal_code. NOTE: The three dots (...) indicate where to add the statement.

Answers

Include a clause that will extract the first three letters of each country's name and place the results in a new column called "new country" in your SQL query.

From customer data, SELECT new country AS SUBSTR (country, 1, 3). For each item in the "customer data" database, the first three letters of the country's name will be extracted, and the data will be saved in a new column called "new country." You can then filter, sort, or group the data based on the first three letters of the nation name using this column in your query. You may use the following syntax to add a statement to your SQL query that will get the first three letters of each country name and put the information in a new column called "new country";

Learn more about SQL query here:

https://brainly.com/question/30115014

#SPJ4

Which of the following codes and standards groups is a private, non-profit organization that identifies public requirements for national safety, engineering, and industrial standards?
A. National Safety Council
B. American National Standards Institute
C. International Conference of building officials
D. the International fire code Institute

Answers

The American Medical Association, the National Organization for Women, and the National Conference of Mayors.

Economic interest is the stake that a person or organization has in the prosperity of a specific industry, location, or activity. It could be used to describe anticipated financial gains or returns or the desire to preserve or advance a specific economic system. It can also refer to any force or drive that persuades a person or group to do something that will bring them financial gain. Every year, individuals from all over the country come together at the National Conference to talk about problems that are important to the whole country, including public policy, the economy, education, and healthcare. Organizations like political parties, think institutes, or advocacy groups frequently arrange it.

Learn more about Economic interest here:

https://brainly.com/question/30270023

#SPJ4

pick a big problem in your school or your community that you think could be solved with the help of computer science, robotics, or hardware engineering.

Answers

Computer science or robots can even predict human behavior, which can aid in crime prevention.

What are the uses of computer science?We can predict hurricanes, tornadoes, and even the outbreak of a potentially fatal disease using these tools. It can even be used to predict human behavior, which can aid in crime prevention. Computer science has the potential to provide us with life-saving tools and work.AI is at the forefront of the digital transformation that is being used to solve some of the world's most pressing problems.Computer science has enabled the development of sophisticated tools that can aid in the resolution of environmental issues. Computers can easily handle issues such as pollution, waste management and disposal, disease identification and containment, and others.Learning about computer science is important and beneficial to all students because it drives innovation, discovery, and even political participation.

To learn more about computer science refer to :

https://brainly.com/question/20837448

#SPJ4

note: if you re-upload the files, you must re-upload all files as the system keeps the most recent uploaded submission only. no zip files! note 2: never hard-code test data in the test program, unless explicitly stated in the assignment. always allow the user to enter the test data using menu option. note 3: code documentation. in addition to the author header at the top of each file, please include a comment block before each method explaining the method and what it does. add in-line comment to explain the code within the method. the goal of this assignment is to reinforce recursive thinking and writing recursive code. program

Answers

The method through which software developers document their code is known as code documentation.

What is good documentation for code?

The method through which software developers document their code is known as code documentation. The description of what a codebase does and how it may be used combines written explanations with crystal-clear illustrations.

It makes code more readable, reproducible, and usable. Short-form notes will do to capture details without disrupting your coding session flow, even though you will want to explain things to yourself in longer form later. Write down the commands, choices, and sources you use in a document that is open next to your code.

The four types of documentation are as follows: tutorials with a learning focus, goal-oriented, instruction manuals, discussions focused on understanding, reference material with a focus on information.

To learn more about code documentation refers to:

https://brainly.com/question/9963733

#SPJ4

EXAMPLE 1. 8 A current of 30. 0 mA is to be divided into two branch
currents of 20. 0 mA and 10. 0 mA by a network with an equivalent
resistance equal to or greater than 10. 0 N. Obtain the branch resistances.
COTTITION 1 g​

Answers

The  resistance in the branch with a current of 20mA is 10 ohms, and the resistance in the branch with a current of 10mA is 20 ohms.

What is the resistance about?

We can use Ohm's law, which states that the current through a conductor between two points is directly proportional to the voltage across the two points, and inversely proportional to the resistance between them, to solve for the branch resistances.

I = V / R

Let R1 be the resistance in the branch with a current of 20mA and R2 be the resistance in the branch with a current of 10mA.

We know that the total current flowing through the network is 30mA and the equivalent resistance is greater than or equal to 10 ohms.

R_eq = (R1 + R2) >= 10 ohms

We also know that the current flowing through the two branches is equal to the total current flowing through the network.

I = I1 + I2

30mA = 20mA + 10mA

Now we can use the above equations to find the resistance of the two branches.

R1 = V / 20mA

= 10 ohms

R2 = V / 10mA

= 20 ohms

Learn more about ohms law from

https://brainly.com/question/231741
#SPJ1

See correct question below

A current of 30 mA is to be divided into branch currents of 20mA and 10mA by a network with an equivalent resistance equal to or greater than 10 ohms. Obtain the branch resistances.

n this lab, you task is to diagnose and correct the problem. use the following steps to walk through the troubleshooting process: press the power button on the computer to verify that it will not start. select the motherboard and view the specifications to identify the location of the cpu socket and fan power connector. answer question 1. close the motherboard specs and verify that the cpu heat sink and fan assembly is installed. answer question 2. answer question 3. based on your findings, you will need to replace the cpu. temporarily remove the heat sink and fan to the workspace.

Answers

An approach to problem solving called troubleshooting is frequently used to fix broken components or operations on a machine or a system.

What are the 7 troubleshooting steps?The next seven steps are frequently employed during troubleshooting, however troubleshooting approaches differ.Acquire knowledge.Write about the issue.The most likely reason should be determined.Making a plan of action and putting a fix to the test.Activate the solution.Speculate on the findings.Make a process record. In order to discover the source of the aforementioned situation, one must first establish a theory of probable causation, test that theory, and then follow the steps outlined above once they have done so.Computer troubleshooting is a term that refers to a methodical approach to problem-solving that is stated to be frequently used to identify and resolve problems with sophisticated machinery, electronics, computers, and software systems.

To learn more about  troubleshooting refer

https://brainly.com/question/28508198

#SPJ4

what is the most important step in safely changing lanes

Answers

Answer:

The most important step in safely changing lanes is to check your mirrors and do a shoulder check to ensure it is safe to do so. This includes checking for vehicles in your blind spot, as well as checking for any pedestrians, bicycles, or other obstacles that may be in the way.

Final answer:

The most critical step in safely changing lanes is checking your blind spots. It's an area that your mirrors cannot cover and so you have to briefly look over your shoulder to ensure there's no vehicle in that space before changing lanes.

Explanation:

The most important step in safely changing lanes is to check your blind spots. This is significant because there might be another vehicle or obstacle in the area of the road you cannot see either through your peripheral vision or rear-view mirrors. Here are the steps you should follow when changing lanes:

Turn on your signal to indicate your intention to other drivers.Check your rear-view mirror and side mirrors to see if the lane is clear.Next, check your blind spot. This is done by briefly looking over your shoulder in the direction you intend to move.Only when you’re sure the lane is clear, carefully change lanes.Make sure to revert to your original lane once you have completed the maneuver.

Learn more about Changing lanes safely here:

https://brainly.com/question/31918423

#SPJ6

If the pressure gauges read low pressure on the high side, high pressure on the low
side, or about equal pressures, what might it indicate?
The system may be low on refrigerant.
The compressor is not working fully.
There is a blockage in the low side of the system that is not allowing refrigerant
to pass.
There is a blockage on the high side or an airflow restriction across the
condenser.

Answers

Note that if the pressure gauges read low pressure on the high side, high pressure on the low side, or about equal pressures, what tthis might indicate is that "There is a blockage on the high side or an airflow restriction across the condenser." (Option D)

How can the above problem be resolved?

A high-side obstruction or an airflow restriction over the condenser can be remedied by locating and eliminating the cause of the blockage or restriction.

This may include cleaning or replacing filthy filters, inspecting the condenser unit for debris, and inspecting for any other obstacles that may be restricting airflow.

A professional technician should be summoned if the system needs to be inspected and repaired.

Learn more about Condenser:
https://brainly.com/question/15563071
#SPJ1

perform the calculations and describe the method used to prepare 5 l of 50x tae buffer using a solid form of tris and edta and a liquid form of acetic acid. the recipe for tae can be found on the internet

Answers

TAE buffer is commonly prepared as a 50× stock solution for laboratory use. A 50× stock solution can be prepared by dissolving 242 g Tris base in water, adding 57.1 ml glacial acetic acid, and 100 ml of 500 mM EDTA (pH 8.0) solution, and bringing the final volume up to 1 liter.

What is Tea Buffer?

It is typically employed in agarose electrophoresis in molecular biology to separate nucleic acids like DNA and RNA. It is composed of EDTA, which binds to divalent cations, and Tris-acetate buffer, which is typically at a pH of 8.3. Although linear, double-stranded DNA moves more quickly in TAE than it does in TBE, TAE has a smaller buffer capacity and is more easily depleted.

Nucleic acids in agarose and polyacrylamide gels are electrophoresed using Thermo Scientific 50X TAE Buffer (Tris-acetate-EDTA). This buffer can be used as a running buffer or a gel preparation buffer, and it can be used for both genomic and big supercoiled DNA.

To learn more about tea buffer refers to;

https://brainly.com/question/13263639

#SPJ4

For usage in laboratories, TAE buffer is frequently produced as a 50 stock solution.

Explain about the Tae Buffer?

Molecular biologists commonly use it to separate nucleic acids like DNA and RNA during agarose electrophoresis. It is made up of EDTA, which binds to divalent cations, and Tris-acetate buffer, which normally has a pH of 8.3. Although linear, double-stranded DNA flows through TAE more quickly than it does via TBE, TAE has a smaller buffer capacity and is more susceptible to depletion.

Using Thermo Scientific 50X TAE Buffer, nucleic acids in agarose and polyacrylamide gels are electrophoresed (Tris-acetate-EDTA). Both genomic and large supercoiled DNA can be used with this buffer, which can also be used as a running buffer or a gel preparation buffer.

To learn more about Tea Buffer refer to:

https://brainly.com/question/29854436

#SPJ4

Struggling to stay faithful and remain attracted to my (34M) wife (28F) after we experienced a violent attack together. Not sure what to do.

Answers

The man's wife jumps in front of him to protect him from an attacker and has a scar on her face. The man finds his wife less attractive and "tries" to remain faithful to her. He is also annoyed that instead of spending the money to look better, she wants to keep it for her son.

What does money mean?

Currency is a commodity generally recognized as an economic medium of exchange. It serves as a means of expressing values ​​and setting prices. It is the primary indicator of wealth as it moves from person to person and country to country. others that enable trade. According to economists, there are four basic types of money: commercial money, fiat money, fiat money, and commodity money. Commodity money is money whose value is derived from the commodities that compose it. Money is a centralized, widely used, and accepted form of exchange that facilitates the exchange of goods and services.

In economics, money is used as a medium of exchange for various goods and services.

To learn more about money refer to

brainly.com/question/24373500

#SPJ4

in this diode circuit, what is the value of the load voltage v subscript r for v subscript i equals minus 5 v and v subscript i equals space 5 v? assume si diode with v subscript d 0 end subscript equals 0.7 space v. instructions: assume an on or off state for the diode and using the developed piecewise linear model for the diode, write the corresponding diode current and voltage equations for each state. write a kvl for the circuit and find the diode voltage and current. use the inequality in the piecewise linear model to check the calculated diode current or voltage values. the above steps should be repeated for each one of the given vi values. after you solved the problem, choose the option that has the correct statement. the statements in three out of four options are incorrect.

Answers

As a formula for current as a function of voltage, the ideal diode equation is quite helpful.When the ideal diode equation is reversed and used to solve for voltage as a function of current, we discover that v(i)=VTln[(iIS)+1).

How do you calculate the value of a diode?As a formula for current as a function of voltage, the ideal diode equation is quite helpful.When the ideal diode equation is reversed and used to solve for voltage as a function of current, we discover that v(i)=VTln[(iIS)+1). However, there are occasions when the inverse relationship may be more helpful.The voltage drop across the load when several diodes are connected in series is equal to (supply voltage - the number of diodes * 0.7).Taking figure 1 as an example, the voltage drop across the diode D1 is (5.0.7) = 4.3 V.D2 has a voltage drop of (5-2 * 0.7) = 3.6 V.Only the forward direction, also known as current flow, is allowed through a diode.

To learn more about ideal diode equation refer

https://brainly.com/question/14894948

#SPJ4

Calculate the constants a1 and a2 in terms of the initial conditions, and thus verify Eqs. (9.34) and (9.35) for the overdamped case.

Answers

Using the initial conditions, we have: a1 = x0 , a2 = (v0 + γx0) / ω

x(t) = x0e-γtcos(ωt)+ (v0 + γx0)e-γtsin(ωt) and v(t) = -γx0e-γtcos(ωt)+ (v0 + γx0)e-γtcos(ωt), which are the same as Eqs. (9.34) and (9.35).

What is oscillations?

This question uses the theory of linear oscillations, which is a branch of classical mechanics that deals with the study of oscillations of a system subject to a linear restoring force.

The theory describes the motion of a system in terms of a set of differential equations, or in the case of this question, a system of coupled differential equations.

The theory can also be used to find the solution to a system of linear differential equations, such as the one used to solve this question.

The steps for this process are as follows:

1. Begin by defining the constants a1 and a2, which are used in Eqs. (9.34) and (9.35) for the overdamped case:

a1 = ?

a2 = ?

2. Next, use the initial conditions (x0 and v0) to calculate a1 and a2:

a1 = x0

a2 = (v0 + γx0) / ω

3. Substitute the values of a1 and a2 into Eqs. (9.34) and (9.35) for the overdamped case:

x(t) = a1e-γtcos(ωt)+ a2e-γtsin(ωt)

v(t) = -γa1e-γtcos(ωt)+ a2e-γtcos(ωt)

4. Finally, plug in the values of a1 and a2 to verify Eqs. (9.34) and (9.35):

x(t) = x0e-γtcos(ωt)+ (v0 + γx0)e-γtsin(ωt)

v(t) = -γx0e-γtcos(ωt)+ (v0 + γx0)e-γtcos(ωt)

which are the same as Eqs. (9.34) and (9.35).

To learn more about oscillations refer :

brainly.com/question/30353823

#SPJ4

predict the temperature at which the saturation pressure is 1 atm (i.e., the normal boiling point) (in k) for pure di-tert-butylsilane based on extrapolating the antoine equation with the coefficients you determine

Answers

Water boils at a temperature of more than 100°C at pressures greater than 1 atm.

Explain about the saturation pressure?

When water vapor and its condensed state are in thermodynamic equilibrium, that pressure is known as the saturation vapor pressure. Water would condense at pressures greater than the vapor pressure, whereas it would evaporate or sublimate at pressures lower than that.

The maximum pressure that water vapor can achieve at a particular temperature. This pressure is that of a vapor that is in equilibrium with its liquid (such as steam with water).

When the saturated vapor pressure of a liquid reaches the same level as its external pressure, it begins to boil. When that takes place, the liquid can begin to boil and vapor bubbles can start to appear all over the liquid.

To learn more about saturation pressure refer to:

https://brainly.com/question/13441330

#SPJ4

which of the following securities is (are) not considered to have an issuer? i collateral trust certificate ii equipment trust certificates iii fractional interests in oil and gas programs iv certificates of interest in a gravel mining program a i and ii only b iii only c iii and iv only d i, ii, iii, iv

Answers

Mortgage bonds, collateral trust certificates, and income bonds are examples of securities issued by corporations

The bond, whether municipal, corporate, or government-issued, is one of the most often used types of debt securities. Other unique categories of debt instruments exist, meanwhile, including assets backed by mortgages, CDOs, preferred stock, and euro commercial paper. A corporate bond is one type of financial asset in particular that is sold to investors. In return for lending the company the money it needs; the investor receives a predetermined quantity of interest payments at either a fixed or variable interest rate. When the bond stops receiving payments and the original investment is returned, it has "matured." Mortgage bonds, collateral trust certificates, and income bonds are all types of debt instruments that corporations issue. Revenue bonds are not issued by corporations.

Learn more about Securities here:

https://brainly.com/question/29510297

#SPJ4

Coal is being discharged from a first conveyor belt at the rate of 120 kg/s. It is received at A by a second belt that discharges it again at B. Knowing that v1 = 3 m/s and v2 = 4.25 m/s and that the second belt assembly and the coal it supports have a total mass of 472 kg, determine the components of the reactions at C and D.

Answers

To determine the components of the reactions at C and D, we need to use the equations of motion. We can use these equations to calculate the components of the reactions at C and D.

To calculate the components of the reactions at C and D, we need to first calculate the acceleration of the second belt assembly and the coal it supports. This can be done by dividing the difference in velocities (v2-v1) by the time it takes for the coal to travel from A to B. We can then use this acceleration to calculate the forces in the x-direction and the y-direction. The forces in the x-direction will be equal to the mass times the acceleration in the x-direction, and the forces in the y-direction will be equal to the mass times the acceleration in the y-direction. We can then use these forces to calculate the components of the reactions at C and D.

Learn more about equations of motion here

https://brainly.com/question/13514745

#SPJ4

Imagine that NASA has funding for only one telescope. The three following proposals are submitted. Which one will be most successful?a. an X-ray telescope located in Antarcticab. a radio telescope in space that orbits Earthc. a near-infrared telescope on a mountaintop inChile

Answers

The most successful proposal is likely to be the radio telescope in space that orbits Earth.

This is because a radio telescope in space is able to observe signals from farther away, including from galaxies and objects outside our own. Additionally, it is not limited by the weather or other environmental factors on Earth, as space-based telescopes are able to operate uninterrupted. This makes it an ideal choice for NASA's limited funding.

NASA, or the National Aeronautics and Space Administration, is the United States government agency responsible for the civilian space program, as well as aeronautics and aerospace research. NASA was established in 1958, and since then it has been responsible for a number of revolutionary advancements in space exploration, including the first human landing on the moon and the development of the Space Shuttle.

Learn more about NASA:

https://brainly.com/question/1350178

#SPJ4

The brass tube AB (E 5 105 GPa) has a cross-sectional area of 140 mm2 and is fitted with a plug at A. The tube is attached at B to a rigid plate that is itself attached at C to the bottom of an aluminum cylinder (E 5 72 GPa) with a cross-sectional area of 250 mm2. The cylinder is then hung from a support at D. In order to close the cylinder, the plug must move down through 1 mm. Determine the force P that must be applied to the cylinder

Answers

In order to close the cylinder, the plug must move down through 1 mm.The force P that must be applied to the cylinder is 1.61 x 10⁶ N.

What is Hooke's Law?

According to Hooke's Law, the force applied to an object is inversely proportional to its extension or compression. In this instance, the aluminum cylinder compression, which is 1 millimeter, is inversely proportional to the force P.

Hooke's Law is the basis of this question. The following are the procedure's steps:

1. Calculating the force required to move the plug down 1 mm is the first step.

The Young's Modulus and cross-sectional area of the brass tube AB, respectively, and the Young's Modulus and cross-sectional area of the aluminum cylinder, respectively, are used to calculate this force using the equation

                                      P = (E₁A₁ + E₂A₂) x L.

2. The values for E₁, A₁, E₂, and A₂ must be determined next. The brass tube has a cross-sectional area of 140 mm², and its Young's Modulus is

                                      5×105 GPa.

The aluminum cylinder has a cross-sectional area of 250 mm² and a Young's Modulus of        

                                    5×72 GPa.

3. Last but not least, we need to figure out the displacement, L. L is 1 mm in this case.

4. When these numbers are added to the equation, we get

                        P = (5 ×105 ×140 + 5×72×250) x 0.001,

which gives us a force of 1.61 x 10⁶ N.

                                  P = (E₁A₁ + E₂A₂) x L

                    P = (5×105 ×140 + 5× 72× 250) x 0.001

                           P = 1.61 x 10⁶ N

Learn more about Hooke's law :

brainly.com/question/15552751

#SPJ4

Two 10
c
m
-long thin glass rods uniformly charged to +
12
n
C
are placed side by side, 4.0
c
m
apart. What are the electric field strengths E1, E2, and E3 at distances 1.0
c
m
, 2.0
c
m
, and 3.0
c
m
to the right of the rod on the left, along the line connecting the midpoints of the two rods?
a) Specify the electric field strength E1.
b) Specify the electric field strength E2.
c) Specify the electric field strength E3.

Answers

The 3 electric field strengths are

a) E1 = 4800 N/C, b) E2 = 2400 N/C , c) E3 = 0 N/C

What is Coulomb's Law?

This question can be solved using Coulomb's Law.

Coulomb's Law states that the force of attraction or repulsion between two charged particles is given by the equation F = k*q1*q2/r^2,

where k is the Coulomb Constant (8.99 x 10^9 Nm^2/C^2), q1 and q2 are the charges of the two particles, and r is the distance between them.

First, we need to calculate the electric field strength at each of the given distances (1.0 cm, 2.0 cm, and 3.0 cm).

To do this, we can use the equation E = k*q/r^2,

where k is the Coulomb Constant (8.99 x 10^9 Nm^2/C^2), q is the charge of the rod, and r is the distance between the rod and the point of interest.

For E1, we can calculate the electric field strength at 1.0 cm to the right of the rod on the left as follows:

E1 = 8.99 x 10^9 Nm^2/C^2 * 12 N/C / (0.01 m)^2

= 8.99 x 10^11 N/C  

= 8990 x 10^6 N/C

= 4800 N/C

For E2, we can calculate the electric field strength at 2.0 cm to the right of the rod on the left as follows:

E2 = 8.99 x 10^9 Nm^2/C^2 * 12 N/C / (0.02 m)^2

= 4.495 x 10^11 N/C

= 4495 x 10^6 N/C

= 2400 N/C

For E3, we can calculate the electric field strength at 3.0 cm to the right of the rod on the left as follows:

E3 = 8.99 x 10^9 Nm^2/C^2 * 12 N/C / (0.03 m)^2

= 2.997 x 10^11 N/C

= 2997 x 10^6 N/C

= 0 N/C

Therefore, the electric field strengths E1, E2, and E3 at distances 1.0 cm, 2.0 cm, and 3.0 cm to the right of the rod on the left, along the line connecting the midpoints of the two rods are 4800 N/C, 2400 N/C, and 0 N/C, respectively.

To learn more about Coulomb's Law refer :

https://brainly.com/question/506926

#SPJ4

Functions and Design requirements• Select one device of your preference and write a primary function and at least 3 design requirements

Answers

I will select a smartphone as the device of my preference.

Primary function: A smartphone is a mobile device that allows users to make phone calls, send texts and emails, browse the internet, and use a variety of apps.

Design requirements:

Durability: The device should be able to withstand everyday wear and tear, such as being dropped or bumped.

Battery life: The device should have a long-lasting battery that can last through a full day of heavy use.

Display: The device should have a high-resolution display that is easy to read in different lighting conditions.

User interface: The device should have an intuitive and user-friendly interface that is easy to navigate.

Read more about smartphones here:

https://brainly.com/question/25207559

#SPJ1

Other Questions
A thin strip of rubber has an unstretched length of14.9 PartAIf it is stretched around a pipe having an outer diameter of 5.0 in., determine the average normal strain in the stripExpress your answer using three significant figures. As a nurse, part of your daily duties is to mix medications in the proper proportions for your patients. For one of your regular patients, you always mix Medication A with Medication B in the same proportion. Last week, your patient's doctor indicated that you should mix 120 milligrams of Medication A with 132 milligrams of Medication B. However this week, the doctor said to only use 121 milligrams of Medication B. How many milligrams of Medication A should be mixed this week? Many drugs under development are delivered by nanoparticles in the bloodstream. To monitor changes in the nanoparticles, investigators can retrieve them from the blood by using a device with electrodes that apply oscillating electric fields. The nanoparticles, which are electrically conducting, are strongly attracted to the nearest electrode, while blood cells, which are poor conductors, experience only a weak force toward the nearest electrode, and suspended ions in the blood experience no net force. Explain why the conducting nanoparticles are strongly attracted to the electrodes while other components of the blood are not Why does Voltaire reference the Italian dialects when explaining religioustolerance? If the equation of the function f(x) is written in standard form f(x) = ax2 + bx + c, what is the value of b?0306O 16O 22 what are the sign and magnitude in coulombs of a point charge that produces a potential of -2.00 v at a distance of 5.00 mm? c Two cannons / same amount of powder / same size cannon balls / one is short and the other is long, Which one would send the cannon ball a greater distance? Explain using physics in a paragraph for each, define the following personality perspectives, then discuss how each could account for the development of both an introverted and an extroverted personality: Mr. Garcia rents a car at a rate of $29.95 per day. There is an additional mileage charge of $20.00 per 100 miles or fraction of 100. If Mr. Garcia drives 550 miles in 5 days, which expression shows the total cost of Mr. Garcias trip? A simple harmonic oscillator consists of a block of mass 2.00kg attached to a spring of spring constant 100N/m. When t=1.00s, the position and velocity of the block are x=0.129m and v=3.415m/s. (a) What is the amplitude of the oscillations? What were the (b) position and (c) velocity of the block at t=0s? which of the following associated conditions places children with down syndrome at greater risk for frequent respiratory infections? What is the weight (in grams) of a liquid that exactly fills a 182. 8 milliliter container if the density of the liquid is 0. 135 grams over milliliter ? Round to the nearest hundredth when necessary and only enter numerical values, which can include a decimal point if a company had issued only one class of stock, the earnings per share are determined by dividing net income plus interest expense by the number of shares outstanding (e) (i) Using a scale of 2cm to represent 5 units on each axes, show, by shading the unwanted regions, the set of points satisfying the three inequalities in parts (b), (c) and (d). [3] (ii) Calculate the maximum number of rabbits the farmer can buy. [2] what is 1/5 of 99. hwelp meh im confused a physical pendulum in the form of a planar object moves in simple harmonic motion with a frequency of 0.450 hz. the pendulum has a mass of 2.20 kg, and the pivot is located 0.350 m from the center of mass. determine the moment of inertia of the pendulum about the pivot poin Imagine youre a teacher and your classroom is really cluttered. In a note to the janitor, tell him a few things that you dont need and a few things to keep in your classroom. Be sure to mention at least 7 total classroom objects. Be sure to mention why you do or do not need those objects. Your letter should consist of 5-8 Spanish sentences.You will be graded on (a) correct verb usage, (b) vocabulary usage and (c) overall quality of your response. Car = 6 cylinder compact Years driven = second and third Miles driven = 13,000 miles in year two and 12,000 in year three In dollars and cents, the total projected depreciation cost for these two years would be Product that is produced in high volume and with predictable demand and that is very price sensitive because the consumer can purchase it from a variety of competitors. Beer and lemonade are mixed in a ratio of 3:2 to make handy. 5% of a beer i alcohol. What percentage of a handy i alcohol?