A negative charge -Q is placed inside the cavity of a hollow metal solid. The outside of the solid is grounded by connecting a conducting wire between it and the earth. Is any excess charge induced on the inner surface of the metal? Is there any excess charge on the outside surface of the metal? Why or why not? Would someone outside the solid measure an electric field due to the charge -Q? Is it reasonable to say that the grounded conductor has shielded the region outside the conductor from the effects of the charge -Q? In principle, could the same thing be done for gravity? Why or why not?

Answers

Answer 1

Answer:

a)  + Q charge is inducce that compensates for the internal charge

b) There is no excess charge on the external face q_net = 0

c) E=0

Explanation:

Let's analyze the situation when a negative charge is placed inside the cavity, it repels the other negative charges, leaving the necessary positive charges to compensate for the -Q charge. The electrons that migrated to the outer part of the sphere, as it is connected to the ground, can pass to the earth and remain on the planet; therefore on the outside of the sphere the net charge remains zero.

With this analysis we can answer the specific questions

a)  + Q charge is inducce that compensates for the internal charge

b) There is no excess charge on the external face q_net = 0

c) If we create a Gaussian surface on the outside of the sphere the net charge on the inside of this sphere is zero, therefore there is no electric field, on the outside

d) If it is very reasonable and this system configuration is called a Faraday Cage

e) We cannot apply this principle to gravity since there are no particles that repel, in all cases the attractive forces.


Related Questions

A plane flying horizontally at a speed of 40.0 m/s and at an elevation of 160 m drops a package. Two seconds later it drops a second package. How far apart will the two packages land on the ground?

Answers

Answer:

Package 1 will land at 228.0 m, package 2 will land at 308.0 m, and the distance between them is 80.0 m.

 

Explanation:

To find the distance at which the first package will land we need to calculate the time:

[tex] Y_{f} = Y_{0} + V_{0y}t - \frac{1}{2}gt^{2} [/tex]

Where:

Y(f) is the final position = 0

Y(0) is the initial position = 160 m

V(0y) is initial speed in "y" direction = 0

g is the gravity = 9.81 m/s²

t is the time=?                                          

[tex] 0 = 160 m + 0t - \frac{1}{2}9.81 m/s^{2}t^{2} [/tex]

[tex] t = \sqrt{\frac{2*160 m}{9.81 m/s^{2}}} = 5.7 s [/tex]

Now we can find the distance of the first package:

[tex] X_{1} = V_{0x}*t = 40.0 m/s*5.7 s = 228.0 m [/tex]

Then, after 2 seconds the distance traveled by plane is (from the initial position):

[tex] X_{p} = V_{0x}*t = 40.0 m/s*2 s = 80.0 m [/tex]

Now, the distance of the second package is:

[tex] X _{2} = X_{1} + X_{p} = 228.0 m + 80.0 m = 308.0 m [/tex]

The distance between the packages is:

[tex] X = X_{2} - X_{1} = 308.0 - 228.0 m = 80.0 m [/tex]

Therefore, package 1 will land at 228.0 m, package 2 will land at 308.0 m and the distance between them is 80.0 m.

I hope it helps you!

Find the work done by a 75.0 kg person in climbing a 2.50 m flight of stairs at a constant speed.

Answers

Answer:

1,839.375 Joules

Explanation:

Work is said to be done is the force applied to an object cause the object to move through a distance.

Workdone = Force * Distance

Workdone = mass * acceleration due to gravity * distance

Given

Mass = 75.0kg

acceleration due to gravity = 9.81m/s²

distance = 2.50m

Substitute the given parameters into the formula:

Workdone = 75.0*9.81*2.50

Workdone = 1,839.375Joules

Hence the workdone is 1,839.375 Joules

Is it true or false that the displacement always equals the product of the average velocity and the time interval?

Answers

Answer:

True.

Explanation:

Applying the definition of average velocity, we know that we can always write the following expression:

        [tex]v_{avg} = \frac{\Delta x}{\Delta t}[/tex] (1)

By definition, Δx is just the displacement, and Δt is the time interval.So, just rearranging terms in (1), we get:

        [tex]\Delta x} = v_{avg}* {\Delta t}[/tex]

If you weigh 660 N on the earth, what would be your weight on the surface of a neutron star that has the same mass as our sun and a diameter of 20.0 km? Take the mass of the sun to be 1.99×10^30, the gravitational constant to be G = 6.67×10^−11Nm^2/kg^2, and the acceleration due to gravity at the earth's surface to be g = 9.810 m/s^2.p

Answers

Answer:

8.93*10^13 N.

Explanation:

Assuming that in this case, the weight is just the the force exerted on you by the mass of the star, due to gravity, we can apply the Universal Law of Gravitation:

       [tex]F_{g}= \frac{G*m_{1}*m_{s}}{r_{s}^{2} }[/tex]

where, m1 = mass of  the man = 660 N / 9.81 m/s^2 = 67.3 kg, ms = mass of the star = 1.99*10^30 kg, G= Universal Constant of Gravitation, and rs= radius of the star = 10.0 km. = 10^4 m.Replacing by the values, we get:

       [tex]F_{g}= \frac{6.67e-11Nm^2/kg^2*1.99e30 kg*67.3 kg}{10e4m^2} = 8.93e13 N[/tex]

Fg = 8.93*10^13 N.

Time it takes stone to fall from the height of 80 m is approximately equal to *

A. 1 s
B. 2 s
C. 4 s
D. 8 s

Answers

Answer:

D

Explanation:

Answer:

c.4s

Explanation:

Jumping on a trampoline cause you to fly up in the air. What type of newton’s law is it ?

Answers

Answer:

The Third law

Explanation:

For every action there is an equal and opposite reaction.

Answer:

First Law

Explanation:

An object at rest (not moving) will stay at rest unless an unbalanced force acts on it.

An object in motion will stay in motion (in a straight line and at a constant speed) unless an unbalanced force acts on it.

You jump down on a trampoline and fly up in the air as a result.

While making some observations at the top of the 66 m tall Astronomy tower, Ron
accidently knocks a 0.5 kg stone over the edge. How long will a student at the bottom
have to get out of the way before being hit?

Answers

Analysing the question:

Since the stone was dropped, there was no initial velocity applied on it and hence it's initial velocity of the stone is 0 m/s

We are given:

height of the tower (h) = 66 m

mass of the stone (m) = 0.5 kg

initial velocity of the stone (u) = 0 m/s

time taken by the stone to reach the ground (t) = t seconds

acceleration due to gravity = 10 m/s²

** Neglecting air resistance**

Finding the time taken by the stone to reach the ground:

from the second equation of motion

h = ut + 1/2at²

replacing the variables

66 = (0)(t) + 1/2 (10)(t)²

66 = 5t²

t² = 13.2

t = 3.6 seconds

I initially wanted to subtract the height of the student from the height of the tower since the time i calculated is the time taken by the stone to reach the ground and that means that the stone has already hit the student before 3.6 seconds

but since we were NOT given the height of a student, the person who posed this question wants the time taken by the stone to reach the ground and that is what we solved

Density is calculated by dividing the mass of an object by its volume. The Sun has a mass of 1.99×1030 kg and a radius of 6.96×108 m. What is the average density of the Sun?

Answers

Answer:

Density is calculated by dividing the mass of an object by its volume. The Sun has a mass of 1.99×1030 kg and a radius of 6.96×108 m. What is the average density of the Sun?

In the absence of a gravitational field, you could determine the mass of an object (of unknown composition) by:
A) applying a known force and measuring it's acceleration.
B) measuring the volume.
C) weighing it.

Answers

Answer:

A) By applying a known force, and measuring it's acceleration.

Explanation:

This is actually something that astronauts do in space as a mathmatical exercise when calculating the mass of an object since F = m × a.

Once the force, and acceleration are applied, the only unknown is the mass which can be solved by dividing force over acceleration. This is because inertial mass is equal to gravitational mass.

How do compounds differ from mixtures such as lemonade

Answers

Answer:

A mixture is a combination of two or more substances in any proportion. This is different from a compound, which consists of substances in fixed proportions. ... The lemonade pictured above is a mixture because it doesn't have fixed proportions of ingredients.

Explanation:

Sometimes we will want to write vectors in terms of a coordinate grid. To show a vector points
horizontally (along the x-axis), place an x after the magnitude of the vector. To show a vector point
vertically (along the y-axis), place a y after the magnitude.
4) Using the notation above,
i. How would you write d1?
ii. How would you write d2?
iii. How would you write dtotal?
d1=(0,5)
d2=(5,5)

Answers

Answer:

III) [tex]d_{1}+ d_{2}=d_{t}[/tex]

Explanation:

I) coordinate (0,5) is the head for [tex]d_{1}[/tex] I will put the tail coordinate as (0,0) but it could be any other number in the x just not in the 5  with the the y being any other value.

II) coordinate (5,5) is the head for [tex]d_{2}[/tex] the tail needs to be in the head of [tex]d_{1}[/tex] being (0,5)

III) coordinates for [tex]d_{t}[/tex] is connecting the tail from [tex]d_{1}[/tex] and the head of [tex]d_{2}[/tex] making it (0,0)[tex](tail)[/tex] and (0,5)[tex](head)[/tex] and is written as [tex]d_{1}+ d_{2}=d_{t}[/tex]

(i) using coordinate grid notation to represent d₁, d₁ = 5y

(ii) using coordinate grid notation  to represent d₂, d₂ = 5x + 5y

(ii) The sum of d₁ and d₂ is written as 5x + 10y

In order to show the horizontal direction of a vector, we will place x after the magnitude of the vector.

Also, to show the vertical direction of a vector, we will place a y after the magnitude of the vector.

(i) Using coordinate grid to represent d = (0, 5)

[tex]d_1 = 0(x) + 5(y)\\\\d_1 = 5y[/tex]

(ii) Using coordinate grid to represent d₂ = (5, 5)

[tex]d_2 = 5x + 5y[/tex]

(iii) The total vector is written as;

[tex]d_1 + d_2 = 5y + (5x + 5y)\\\\d_1 + d_2 = 5y + 5x + 5y\\\\d_1 + d_2 = 5x + 10y[/tex]

Learn more here: https://brainly.com/question/17212749

If it takes you 5 minutes to dry your hair using a 1200-W hairdryer plugged into a 120-V power outlet, how many Coulombs of charge pass through your hair dryer

Answers

Answer:

The charge pass through your hair dryer is 3000 C.

Explanation:

Given that,

Power = 1200 W

Voltage = 120 V

Flow time = 5 min

We need to calculate the current

Using formula of power

[tex]P=VI[/tex]

[tex]I=\dfrac{P}{V}[/tex]

Put the value into the formula

[tex]I=\dfrac{1200}{120}[/tex]

[tex]I=10\ A[/tex]

We need to calculate the charge pass through your hair dryer

Using formula of current

[tex]I=\dfrac{Q}{t}[/tex]

[tex]Q=It[/tex]

Put the value into the formula

[tex]Q=10\times5\times60[/tex]

[tex]Q=3000\ C[/tex]

Hence, The charge pass through your hair dryer is 3000 C.

21. Prediction: If you were to measure the current at points A, B and C, how do you think the values would compare? Why? 22. Prediction: If you were to measure the potential differences across these bulbs (what the voltmeter measures) how do you think the values will compare to each other and to the potential difference across the battery pack or the power supply? Why?

Answers

Answer:

hello your question is incomplete attached below is the complete question

21) The current at points B and C would be the same ( identical bulbs) while the current at Point A will be greater than the currents at point B and C. i.e. twice the current at either point B or point C

22) The potential difference across the bulbs will be the same and this is because the bulbs are connected in parallel to the the power source ( battery)

hence the voltage in the battery will be equal to the voltage across each bulb

Explanation:

The current at points B and C would be the same ( identical bulbs) while the current at Point A will be greater than the currents at point B and C. i.e. twice the current at either point B or point C

The potential difference across the bulbs will be the same and this is because the bulbs are connected in parallel to the the power source ( battery)

hence the voltage in the battery will be equal to the voltage across each bulb

what is the force produced on a body of 30kg mass when a body moving with the velocity of 26km/hr is acceleted to gain the velocity of 54 km/hr in 4 sec​

Answers

Answer:

F = 58.35 [N]

Explanation:

To solve this problem we must use Newton's second law, which tells us that force is equal to the product of mass by acceleration. But first we must use the following equation of kinematics.

We have to convert speeds from kilometers per hour to meters per second

[tex]\frac{26km}{hr}*\frac{1000m}{1km}*\frac{1hr}{3600s}=\frac{7.22m}{s} \\\frac{54km}{hr}*\frac{1000m}{1km}*\frac{1hr}{3600s}=15\frac{m}{s}[/tex]

[tex]v_{f}=v_{o}+(a*t) \\[/tex]

where:

Vf = final velocity = 15 [m/s]

Vi = initial velocity = 7.22 [m/s]

a = acceleration [m/s^2]

t = time = 4 [s]

Note: the positive sign of the above equation is because the car increases its speed

15 = 7.22 + (a*4)

a = 1.945 [m/s^2]

Now we can use the Newton's second law:

F = m*a

F = 30*1.945

F = 58.35 [N]

Velocity which stone gains when falling from height of 80 m is approximately equal to *

A. 0
B. 1 m/s
C. 8 m/s
D. 40 m/s
E. 300 m/s

Answers

Answer:

40

Explanation:

The current is suddenly turned off. How long does it take for the potential difference between points a and b to reach one-half of its initial value

Answers

Complete Question

The complete  question is shown on the first uploaded image

Answer:

Explanation:

From the question we are told that

     The original voltage is  [tex]V_o[/tex]

     The new voltage is [tex]V  =\frac{V_o}{2}[/tex]

     The capacitance is  [tex]C = 150\ nF = 150 *10^{-9} \  F[/tex]

     The first resistance is  [tex]R_i =  26 \Omega[/tex]

      The second resistance is [tex]R_E =  200 \Omega[/tex]

Generally the equivalent resistance is  

        [tex]R_e =  R_1 + R_E[/tex]

=>     [tex]R_e =  26 +200 [/tex]

=>     [tex]R_e = 226 \ \Omega [/tex]

Generally the time constant is mathematically represented as

     [tex]\tau  =  RC[/tex]

=>  [tex]\tau  =  226 * 150 *10^{-9}[/tex]

=>  [tex]\tau  =  3.39 *10^{-5} \  s [/tex]

Generally the voltage is mathematically represented as

    [tex]V =  V_o  e^{-\frac{t}{\tau} }[/tex]

=>   [tex]\frac{V_o}{2} =  V_o  e^{-\frac{t}{\tau} }[/tex]

=>   [tex]0.5 =    e^{-\frac{t}{\tau} }[/tex]

=>   [tex]ln(0.5) =    {-\frac{t}{ 3.39 *10^{-5} } }[/tex]

=>  [tex]ln(0.5)   * 3.39 *10^{-5}  =   -t [/tex]

=>  [tex]t = 2.35*10^{-5} \  s  [/tex]

Which of the following is not true about taxes? A. Mandatory sum of money by government so that it can operate B. Due on April 15th C. largely collected to support private businesses D. Collected by the Internal Revenue Service (IRS)

Answers

Answer would have to be A

help me get the answer in Physical Science.

Answers

Answer:

lithium

Explanation:

I took physical science 2 years ago and passed with an A

What are the standard international (si) units of distance

Answers

Answer:

meter

Explanation:

Answer: The International System of Units is a system of measurement based on 7 base units

Explanation: the metre, kilogram, second, ampere, Kelvin, mole, and candela. These base units can be used in combination with each other.

A toy rocket is launched vertically from ground level (y = 0 m), at time t = 0.0 s. The rocket engine provides constant upward acceleration during the burn phase. At the instant of engine burnout, the rocket has risen to 98 m and acquired a velocity of The rocket continues to rise in unpowered flight, reaches maximum height, and falls back to the ground. The upward acceleration of the rocket during the burn phase is closest to:

29 m/s2

31 m/s2

33 m/s2

30 m/s2

32 m/s2

Answers

Explanation:

The question is incomplete. Here is the complete question.

A toy rocket is launched vertically from ground level (y = 0 m), at time t = 0.0 s. The rocket engine provides constant upward acceleration during the burn phase. At the instant of engine burnout, the rocket has risen to 98 m and acquired a velocity of  30m/s. The rocket continues to rise in unpowered flight, reaches maximum height, and falls back to the ground. The upward acceleration of the rocket during the burn phase is closest to...

Given

initial velocity of rocket u = 0m/s

final velocity of rocket = 30m/s

Height reached by the rocket = 98m

Required

upward acceleration of the rocket

Using the equation of motion below to get the acceleration a:

[tex]v^2 = u^2+2as\\30^2 = 0^2 + 2(a)(98)\\900 = 196a\\a = \frac{900}{196}\\a = 4.59m/s^2[/tex]

Hence  upward acceleration of the rocket during the burn phase is closest to 5m/s²

Note that the velocity used in calculation was assumed.

Which statement best describes an atom? (2 points)
оа
Protons and neutrons grouped in a specific pattern
Ob
Protons and electrons spread around randomly
ос
A group of protons and neutrons that are surrounded by electrons
Od
A ball of electrons and neutrons surrounded by protons

Answers

Answer:

A group of protons and neutrons that are surrounded by electrons  I think that's the answer...

Explanation:

^ what they said
explanation: i don’t remember

Radio station KBOB broadcasts at a frequency of 85.7 MHz on your dial using radio waves that travel at 3.00 × 108 m/s. Since most of the station's audience is due south of the transmitter, the managers of KBOB don't want to waste any energy broadcasting to the east and west. They decide to build two towers, transmitting in phase at exactly the same frequency, aligned on an east-west axis. For engineering reasons, the two towers must be AT LEAST 10.0 m apart. What is the shortest distance between the towers that will eliminate all broadcast power to the east and west?

Answers

Answer:

12.5 m

Explanation:

The first thing we would do is to calculate the wavelength. To do this, we use the formula

v = fλ, where

v = wave speed

f = frequency

λ = wavelength

If we make wavelength the formula, we have

wavelength = speed / frequency

Now, we substitute the values we had been given and we have

wavelength = (3 * 10^8 m/s) / (85.7 * 10^6 Hz) wavelength = 3.50 m

half of this said wavelength will be

= 3.50 / 2

= 1.75 m

As a result of the engineering constraints with the towers being more than 10 m apart, the distance can't be 1.75 m and as such, it has to be a multiple of 1.75m. So we say,

(10 / 1.75) = 5.7

So the separation will have to be 7 half wavelengths

= (7 * 1.75) = 12.5 m

what is the meaning of relative as a noun?

Answers

Answer:

noun. a person who is connected with another or others by blood or marriage. something having, or standing in, some relation or connection to something else. something dependent upon external conditions for its specific nature, size, etc. (opposed to absolute).

The scientific method is the only way of learning about Nature used by scientist today *

A. true
B. false

Answers

Answer:

false

Explanation:

A battery is used to charge a parallel-plate capacitor, after which it is disconnected. Then the plates are pulled apart to twice their original separation. This process will double the: __________A. capacitance
B. surface charge density on each plate
C. stored energy
D. electricfield between the two places
E. charge on each plate"

Answers

Answer: C.

Explanation:

For a parallel-plate capacitor where the distance between the plates is d.

The capacitance is:

C = e*A/d

You can see that the distance is in the denominator, then if we double the distance, the capacitance halves.

Now, the stored energy can be written as:

E = (1/2)*Q^2/C

Now you can see that in this case, the capacitance is in the denominator, then we can rewrite this as:

E = (1/2)*Q^2*d/(e*A)

e is a constant, A is the area of the plates, that is also constant, and Q is the charge, that can not change because the capacitor is disconnected.

Then we can define:

K = (1/2)*Q^2/(e*A)

And now we can write the energy as:

E = K*d

Then the energy is proportional to the distance between the plates, this means that if we double the distance, we also double the energy.

If the plates are pulled apart to twice their original separation, then this will double the stored energy. Hence, option (C) is correct.

The given problem is based on the concept of parallel plat capacitor. For a parallel-plate capacitor where the distance between the plates is d.

The capacitance is:

C = e*A/d

here.

e is the permittivity of free space.

Since, the distance is inversely proportional then if we double the distance, the capacitance halves.  Now, the stored energy can be given as,

E = (1/2)*Q^2/C

here,

Q is the charge stored in the capacitor.

Now you can see that in this case, the capacitance is in the denominator, then we can rewrite this as:

E = (1/2)*Q^2*d/(e*A)

e is a constant, A is the area of the plates, that is also constant, and Q is the charge, that can not change because the capacitor is disconnected.

Then we can define:

K = (1/2)*Q^2/(e*A)

And now we can write the energy as:

E = K*d

So, the energy is proportional to the distance between the plates.

Thus, we can conclude that if the plates are pulled apart to twice their original separation, then this will double the stored energy. Hence, option (C) is correct.

Learn more about the energy stored in a capacitor here:

https://brainly.com/question/3611251

The drawing shows two identical airplanes at an air show. The airplanes are flying at the same speed. Airplane W is flying 50 m higher than airplane X. Which statement best describes the energy of the two airplanes?

Answers

Answer:

Airplane X has more gravitational potential energy than Airplane W

Explanation:

Gravitational potential energy is defined as "the energy acquired by an object due to its positional change in presence of gravitational force."

That being said, gravitational potential energy depends on the height of an object above the ground. It also depends on the mass of the object and even further, the amount of gravitational force that is applied.

And if we take a look at the question again, we'd agree that the two airplanes are flying at different heights, this means their gravitational potential energy will be different. And as such, Airplane X has more gravitational potential energy than Airplane W

the diagram shows a contour map. letter a through k are reference points on the map. which points are located at the same elevation above sea level?

Answers

Answer:

K and I

Explanation:

Contour maps use lines that represent spaces in a map that have the same elevation, this means that all the lines should be continuous and closed, in this case, we are not able to see the full extent of most of the lines, but since the points are located in different lines we can assume that they are at different heights, so since only point K and point I are on the same line, we know that these two points are at the same height.

which statement is correct about the strength of forces?
-Electrostatic forces are exactly 10 times stronger than gravitational forces.
-Electrostatic forces are exactly 10 times weaker than gravitational forces.
-Electrostatic forces are trillions of times stronger than gravitational forces.
-Electrostatic forces are trillions of times weaker than gravitational forces.

Answers

Answer:

Thanks!!!!! adding this so it doesn’t get deleted.

Explanation:

1. Electrostatic forces are trillions of times stronger than gravitational forces. 2. normal force and friction 3. contact forces 4. The electrostatic forces from the contact of the hands with the paper causes the paper molecules to separate. 5. The electrostatic forces between the molecules of the board prevent the force of gravity from breaking the board apart.

The correct statement over here is that electrostatic forces are trillions of times stronger than gravitational forces. Hence, option C is correct.

What is an Electrostatic Force?

One of the basic forces in the cosmos is electrostatic force. In the universe, there are four basic forces. These include gravitational force, electromagnetic force, weak nuclear force, and strong nuclear force. Under the umbrella of electromagnetic force is electrostatic force. Two charges placed apart are subject to the electrostatic force. The size of each charged and the separation between them determines how much electrostatic force there will be.

When two charges of the same type are brought together, whether positive or negative, they repel one another. It is known as the electrostatic force of repelling when it operates among two charges that are similar.

Therefore, the electrostatic forces are trillions of times stronger than the gravitational forces.

To know more about Electrostatic Force:

https://brainly.com/question/9774180

#SPJ2

Other Questions
how does aerobic exercise help cardiovascular diseases? Someequationshave the formy=kxy=kx, wherekkis a number.WhichequationCANNOT be written in the formy=kxy=kx? Please help!What is the inverse of f(x)=x2 - 11 if the domain is x > 0 3Rewrite the equation y= 3/7x + 4 in standard form. please help !!!!!!! :)) The federalist can be called a campaign document because it Which of the following is the factor of 5x - 35? A. 5(x - 7 ) B. 5(x + 7) C. 7(x - 5) D. 7(x + 5) What role does iodine play within the thyroid? Order from least to greatest Given a 4 percent interest rate, compute the year 6 future value of deposits made in years 1, 2, 3, and 4 of $1,600, $1,800, $1,800, and $2,100. (Do not round intermediate calculations. Round your final answer to 2 decimal places.) according to the law of demand consumer demand for a product will decrease if Assume real per capita GDP in North Metropolania is $4,000 while in East Quippanova it is $1,000. The annual growth rate in North Metropolania is 2.33%, while in East Quippanova it is 7%. How many years will it take for East Quippanova to catch up to the real per capita GDP of North Metropolania?a. about 10 years b. about 30 years c. about 40 years d. about 120 years e. East Vice City will never be able to catch up with North Midgar.What will the income of the two countries be when it is equal? could some one please help I'm not that good with math which is a legal consequence for associated drug abuse What is the primary role of the executive branch? What supplies electricity in a circuitA.the sourceB.the conductorC.the insulaterD.the wires Which technology is shown in the photograph?A. Negative controlsB. Biostimulation reactionC. Gel electrophoresisD. Polymerase chain reaction 6th grade math i mark as brainly which organelle plays no role in the production of or utilization of energy in the cell? The formula for the area A of a triangle is A=(1/2)bh, where b is the length of the base and h is the height. Rearrange the formula to solve for b and select the correct option below (A) b=A/(2h) (B) b=2Ah (C) b=(1/2)Ah (D) b=2A/h