A double-blind study is one in which neither the researchers nor the subjects know whether the subject is receiving the real treatment or the placebo. What is the value of this kind of study?

A column or plume in hydrodynamics is a vertical body of one fluid moving through another. Momentum (inertia), diffusion, and buoyancy are a few of the factors that govern how the fluid moves (density differences).

To learn more about plume of gas, refer to:

https://brainly.com/question/29440474

QUESTION IS NOT VISIBLE CLEARLY!!!!!!

The Fake Artist Who Conned the Nazis It was conducted in Dutch. The accused was charged with faking works of art. He confessed to the crime. Han van Meegeren analysed the works of the old masters.

Schrenker made a false call before crashing his aircraft. He mails his pal. Due to more advanced security measures, it is now more difficult to construct a phony ID. It is difficult to master because of all the security measures. According to Mr. Abagnale, all that is necessary to obtain a birth certificate is a courthouse copy of the child's death record.

But he wasn't contesting his guilt; in fact, establishing his guilt would save his life. Investigating the legendary Han van Meegeren is Noah Charney.

To know more about Mr. Abagnale visit:-

https://brainly.com/question/31050606

#SPJ1

Question:

20 points!!!!!!!!UNIT 3 LAB The Art Forger Who Tricked the Nazis Where did the trial take place? What was the defendant accused of? What was strange about his defense? How did Han van Meegeren manage to forge the works of art so well? What did he do to make them look authentic? How could forensic testing have changed this case? What ultimately happened to van Meegeren? Money to Run, But No Skills to Hide How did Schrenker try to fake his own death? How did he get caught? Why is creating a new state ID harder to do these days? Why is it so difficult to fake a passport? What is the easiest way for criminals to obtain a passport? Why does Mr. Abagnale claim it is easy to get a fraudulent passport? What steps does someone have to take to make this happen? Why was Mr. Abagnale arrested? What happened to him after his arrest?

Answer:

n = 0.43 moles

Explanation:

from ideal gas equation;

PV = nRT

making n subject of the formula

n = PV/RT

but;

T = (10 + 273)k = 283k

P = 2 atm

V = 5dm³

R = 0.082

Therefore,

n = 2 x 5

0.082 x 283

= 0.43 moles

Therefore, the rate at which the ethanol was being pumped into the tank is 1.21 liters per minute.

To solve this problem, we need to use the fact that the concentration of ethanol in the mixture is 15% and that the flow rate is constant.

Let's assume that the rate at which the ethanol is being pumped into the tank is x liters per minute. Then, after t minutes, the total volume of the mixture in the tank will be (40.5 + xt) liters, and the amount of ethanol in the mixture will be 0.15xt liters.

We also know that after 25 minutes, the amount of water in the tank was 84.2 liters. Therefore, the amount of ethanol in the mixture after 25 minutes was (40.5 + 25x - 84.2) * 0.15 liters.

Setting these two expressions equal to each other, we get:

0.15xt = (40.5 + 25x - 84.2) * 0.15

Simplifying and solving for x, we get:

x = 1.21 liters per minute

For such more question on flow rate

https://brainly.com/question/24560420

#SPJ4

Note: The complete question would be as bellow,

Ethanol was pumped into a plastic tank containing 40.5 liters of water initially, with a constant flow rate. If the concentration of ethanol in the mixture is 15%, what is the rate at which the ethanol was being pumped into the tank?

This yields 2.68 g of fertilizer that must be applied to provide 2.40 g N to the plant.

To calculate the amount of fertilizer needed to provide 2.40 g N to a plant, first determine the percentage of N present in the fertilizer. The fertilizer contains 54.2% CH4N2O (urea), 23.2% KNO3, and 12.2% (NH4)2HPO4. Adding these three percentages together gives you 89.6% of the fertilizer that is nitrogen-containing.
Next, calculate the amount of nitrogen present in 2.40 g. To do this, divide 2.40 g by the total percentage of nitrogen (89.6%) in the fertilizer. This yields 2.68 g of fertilizer that must be applied to provide 2.40 g N to the plant.

Know more about fertilizers

https://brainly.com/question/24544067

#SPJ11

The initial volume is equal to the value of nRT/P when the pressure is 800.0 mm Hg, so the initial volume is 0.50 l.

We can use the ideal gas law to solve this problem: PV = nRT, where P is the pressure, V is the volume, n is the amount of substance, R is the ideal gas constant, and T is the temperature. Since the temperature is constant, we can assume that the value of nRT is also constant.

We can rearrange the equation to find the volume: V = (nRT/P).

First, we can calculate the value of nRT/P for the initial volume, 740.0 mm Hg:
(nRT/740.0) = 0.50.

Now, we can solve for nRT/P when the pressure is 800.0 mm Hg:
(nRT/800.0) = 0.50.

The initial volume is equal to the value of nRT/P when the pressure is 800.0 mm Hg, so the initial volume is 0.50 l.

Know more about volume

https://brainly.com/question/463363

#SPJ11

It takes approximately 9,510.77 hours for the concentration of 11-trans-retinal to reach [tex]3.14*10^{-3}M[/tex]

The concentration of 11-trans-retinal can be calculated using the following equation:
[tex]ln(At/A0) = kt[/tex]
Where At is the concentration of 11-trans-retinal at time t, A0 is the initial concentration of 11-trans-retinal, and k is the rate constant.
Since we know the rate constant is [tex]1.02*10^{-5} /s[/tex] and the concentration of 11-trans-retinal is [tex]3.14*10^{-3}M[/tex], we can solve for t.
ln([tex]3.14*10^{-3}M/A0[/tex]) = [tex](1.02*10^{-5})t[/tex]
Solving for t, we get:
[tex]t = ln(3.14*10^{-3} /A0)/(1.02*10^{-5} )[/tex]
Therefore, it takes approximately 9,510.77 hours for the concentration of 11-trans-retinal to reach [tex]3.14*10^{-3}M[/tex].

For more question on rate constant click on

https://brainly.com/question/24749252

#SPJ11

The reaction of solid sodium and chlorine gas is a single displacement reaction resulting in sodium chloride.

Given that solid sodium reacts with chlorine gas to form sodium chloride also called as table salt.

The reaction is as follows: [tex]2Na + Cl2 -- > 2NaCl[/tex]

This is an example of a single displacement reaction, also known as a substitution reaction. In this type of reaction a more reactive element displaces a less reactive element from a compound.

Here, the sodium (a more reactive element) displaces the chlorine (a less reactive element) from the chloride compound, resulting in sodium chloride (table salt). The sodium atom donates one of its electrons to the chlorine molecule, forming a sodium cation (Na+) and a chloride anion (Cl-). They are then attracted to each other, forming the ionic compound sodium chloride.

To learn more about displacement reaction click here https://brainly.com/question/29307794

#SPJ1

The continents previously comprised a single landmass when they drifted apart, as according Wegener's Atomic Hypothesis. Pangaea existed, according to Wegener, some 300,000 years ago.

The Pangea, Gondwana, or Pannotia supercontinents were the most recent. Geologists believe that there were formerly three supercontinents: Nuna (also known as Columbia), Rodinia, or Ur. A single landmass which encompasses at least 75% of the world's territory is referred to be a supercontinent.

A landmass thought up almost most or all of the land on Earth is known as a supercontinent. This term could be used to the landmass that is made up of modern-day Africa and Eurasia. Pangea was the most ancient supercontinent to include all of Earth's significant—and possibly most well-known—landmasses.

To know more about Atomic visit:

https://brainly.com/question/30898688

#SPJ1

1.410317885651

Below me are the examples:

1 grams Chlorine to mol = 0.02821 mol

10 grams Chlorine to mol = 0.28206 mol

20 grams Chlorine to mol = 0.56413 mol

30 grams Chlorine to mol = 0.84619 mol

40 grams Chlorine to mol = 1.12825 mol

50 grams Chlorine to mol = 1.41032 mol

100 grams Chlorine to mol = 2.82064 mol

200 grams Chlorine to mol = 5.64127 mol

Answer:

the answer is 0.21 g (B).

Explanation:

The answer is B, 0.21 g, because:

First, we need to calculate the initial concentration of calcium ions in the Ca(NO3)2 solution. To do this, we can use the formula:

moles of solute/volume of solution = concentration

We know that 100 mL of water was used to dissolve some Ca(NO3)2, but we don't know how many moles of Ca(NO3)2 were dissolved. Let's call this unknown quantity x.

So the initial concentration of calcium ions is:

moles of Ca2+/total volume of solution = x/(0.1 L) = (2x)/0.2 L = 10x M (since the solution is diluted to 0.2 L by adding 0.1 L of Na2SO4)

Next, we can use the Ksp expression for calcium sulfate:

Ksp = [Ca2+][SO42-]

We know that the Ksp value is 2.4 x 10^5 and the concentration of sulfate ions is 0.010 M (since 0.01 M Na2SO4 was added to the solution). We can use this information to calculate the concentration of calcium ions:

Ksp = [Ca2+][SO42-] = (x/(0.1 L))[0.010 M]

Solving for x, we get:

x = Ksp(0.1 L)/0.010 M = 2.4 x 10^5 (0.1 L)/0.010 M = 2.4 x 10^6 M

Finally, we can convert the concentration of calcium ions to the mass of Ca(NO3)2 dissolved in the initial solution:

mass = moles x molar mass = (10x M)(0.2 L)(164 g/mol) = 328x g

Substituting x = 2.4 x 10^6 M, we get:

mass = 328(2.4 x 10^6 g/mol) = 0.7872 x 10^9 g = 0.7872 g

Rounding to two significant figures, the answer is 0.21 g (B).

Answer:

light intensity

Explanation:

Answer:

D- 0.100L

Explanation:

When more sodium chlorate is added, it will increase the amount of products formed in the balanced equation: Sodium chlorate decomposes to produce sodium chloride plus oxygen gas.

The balanced equation for this reaction is: 2NaClO3 → 2NaCl + 3O2.In a chemical reaction, the reactants (sodium chlorate in this case) are transformed into products (sodium chloride and oxygen gas). According to the law of conservation of mass, the total mass of reactants must equal the total mass of products.

Therefore, the coefficients in a balanced chemical equation must always be proportional and consistent with the number of atoms/molecules in the reactants and products. Since adding more reactant will result in the formation of more products, the coefficients in the balanced equation will need to be adjusted to reflect this increase.

For example, if more sodium chlorate is added, the coefficients for sodium chloride and oxygen gas will increase accordingly to maintain a balanced equation. The equation will look something like this: 2NaClO3 + x → 2NaCl + 3O2 where x represents the additional amount of sodium chlorate added.

Know more about reactants

https://brainly.com/question/6421464

#SPJ11

Yes, it is technically accurate to say a substance is insoluble if it has very low solubility in a particular solvent.

The Ksp value of AgCl is [tex]1.8 \times 10^{-10}[/tex].

The substance is insoluble means that the substance does not dissolve or dissolve only to a negligible extent in the solvent.

For example, silver chloride (AgCl) is considered an insoluble substance because it has very low solubility in water. The solubility product constant (Ksp) for AgCl in water at room temperature is approximately [tex]1.8 \times 10^{-10}[/tex]

This means that the concentration of silver ions ([tex]Ag^+[/tex]) and chloride ions ([tex]Cl^-[/tex]) in a saturated solution of AgCl is very low, indicating that only a small amount of AgCl has dissolved in the water.

We can say that AgCl is essentially insoluble in water, and any small amount of AgCl that does dissolve in water will immediately re-precipitate out of the solution once the solution becomes saturated with respect to AgCl.

Therefore, we can say that AgCl is essentially insoluble in water, and any small amount of AgCl that does dissolve in water will immediately re-precipitate out of the solution once the solution becomes saturated with respect to AgCl.

for such more question on  Ksp value

https://brainly.com/question/29010250

#SPJ4

There are 0.001025 moles of Cu2+ in the sample. Since the concentration of the dissolved brass solution is given as 0.0205 M (molar concentration) for Cu2+.  

Brass is a solid mixture (alloy) made up of 30% zinc and 70% copper. The solvent is the material in greater quantity, and the solute is the substance in smaller quantity. Zinc serves as the solute while copper serves as the solvent in brass.

We can use the following formula to calculate the number of moles of Cu2+ in the sample:

moles Cu2+ = concentration (M) x volume (L)

However, we need to convert the volume from milliliters (mL) to liters (L) in order to use this formula. We can do this by dividing the volume by 1000:

50.0 mL = 50.0 / 1000 L = 0.0500 L

Now we can plug in the values and solve for the number of moles:

moles Cu2+ = 0.0205 M x 0.0500 L

moles Cu2+ = 0.001025 mol

To know more about brass solution visit:-

brainly.com/question/30487999

#SPJ1

Among the following options, the disadvantage of marble is that it erodes due to pollution. The correct option is 2.

Marble is a kind of rock that is soft and easy to carve when freshly quarried, but hardens as it ages. Marble is a naturally occurring rock that is made up of the mineral calcite. Marble is utilized as a decorative material in architecture and sculpture because of its ability to be polished to a high shine.

Most marbles can be categorized as either calcite or dolomite. The term "marble" is often used in the industry to refer to any polished natural stone, but this is a misnomer. Only true marble, which is a metamorphic rock, can be polished in this manner.

The advantages of marble are as follows:

The disadvantages of marble are as follows:

To know more about marble, refer here:

https://brainly.com/question/13368283#

#SPJ11

Answer:

it gains mass

Explanation:

metals have incorporated oxygen atoms

Compounds 1 and Compound 2 are the same because they have the same empirical formula, which is H₂O.

All of the compounds have the same elements (H and O), but the ratios of the elements in each compound are different. To determine which compounds are the same, we need to calculate their empirical formulas.

The empirical formula of a compound gives the simplest whole-number ratio of the atoms in the compound.

To calculate the empirical formula, we divide the number of atoms of each element by its atomic weight and then divide by the smallest result.

Using this method, we get the following empirical formulas for each compound:

Compound 1: H₂O (divide 11 g of H by 1 g/mol and 89 g of O by 16 g/mol)

Compound 2: H₂O (divide 20 g of H by 1 g/mol and 162 g of O by 16 g/mol)

Compound 3: H₂O₄ (divide 2 g of H by 1 g/mol and 33 g of O by 16 g/mol)

Compound 4: H₂O₂ (divide 8 g of H by 1 g/mol and 56 g of O by 16 g/mol)

Learn more about empirical formula here: https://brainly.com/question/1603500

#SPJ1

850 kiloliters are equal to 850,000,000 millilitres.

To convert 850,000,000 milliliters to kiloliters, we can use the conversion factor 1 kiloliter = 1,000 liters and 1 liter = 1,000 milliliters.

First, we need to convert the milliliters to liters by dividing 850,000,000 by 1,000:

850,000,000 milliliters / 1,000 = 850,000 liters

Then, we can convert the liters to kiloliters by dividing 850,000 by 1,000:

850,000 liters / 1,000 = 850 kiloliters

Therefore, 850,000,000 milliliters is equivalent to 850 kiloliters.

To learn more about conversion factors refer to:

brainly.com/question/30650227

#SPJ4

The concentration of the carbon dioxide solution is 8.8 g/L.

What is Solution?

A solution is a homogeneous mixture of two or more substances. In a solution, the particles of the solute (the substance that is dissolved) are uniformly distributed throughout the solvent (the substance in which the solute is dissolved) on a molecular level. Solutions can be in any physical state, i.e., solid, liquid, or gas. In a solution, the solute particles are too small to be seen, and the solution appears clear and transparent.

To determine the concentration of the carbon dioxide solution, we need to know the units of the given mass (44 grams). Let's assume it is in grams per liter (g/L).

First, we need to convert the volume of the solution from milliliters to liters:

5000 mL = 5 L

Next, we can use the formula for concentration:

concentration (in g/L) = mass (in g) / volume (in L)

Plugging in the values we get:

concentration = 44 g / 5 L

Simplifying, we get:

concentration = 8.8 g/L

Learn more about Solution from the given link

https://brainly.com/question/25326161

#SPJ1

Enolate ion of an aromatic ketone reacts faster with an aldehyde group (producing a crossed-aldol reaction) than with the carbonyl group of another molecule of ketone because of the electronic effect of the substituent.

An enolate ion of an aromatic ketone reacts faster with an aldehyde group to produce a crossed aldol reaction due to electronic effects of the substituent. In case of a ketone, the alpha-proton (C-H bond) is less acidic as compared to that of an aldehyde. The difference in the acidities of alpha-proton atoms is caused by the electron-withdrawing nature of the ketone carbonyl group. This is due to the electronic effects of the substituent.The cross aldol reaction is the reaction between an aldehyde and a ketone to produce a β-hydroxy ketone or aldol. The enolate of a ketone reacts with an aldehyde (it's carbonyl carbon) to form the β-hydroxy ketone or aldol.Crossed aldol reactions occur more frequently and are of greater interest than simple aldol reactions. The main reason for this is the possibility of forming different products by using different aldehydes and ketones.

Know more about electronic effect

https://brainly.com/question/26366780

#SPJ11

The carbonyls that will give an achiral product after a Grignard reaction with CH3MgBr are aldehydes and ketones.

Aldehydes and ketones do not have a chiral center. These have two identical groups attached to the carbonyl carbon.

For example, formaldehyde (CH2O) and acetone (CH3COCH3) will give achiral products after a Grignard reaction with CH3MgBr.

In contrast, carbonyls that have two different groups attached to the carbonyl carbon, such as propanal (CH3CH2CHO) and 2-butanone (CH3CH2COCH3), will give a mixture of enantiomers after a Grignard reaction with CH3MgBr.

This is because the Grignard reagent can attack at either the top face or bottom face of the carbonyl to give an equal mixture of chiral products.

In summary, carbonyls that do not have a chiral center will give an achiral product after a Grignard reaction with CH3MgBr, while carbonyls that have a chiral center will give a mixture of enantiomers.

To know more about Grignard reaction, refer here:

https://brainly.com/question/30546045#

#SPJ11

The type of reaction is represented by this graph is D. Exothermic Reaction progress

Chemical processes known as endothermic reactions take in energy from their environment, typically in the form of heat, light, or electricity. As a result, the reaction's products possess greater potential energy than its reactants. As energy is being drawn from the surroundings during the reaction, they will feel cooler or colder. A chemical reaction known as an exothermic reaction, on the other hand, releases energy into the environment, typically in the form of heat, light, or sound. Because of this, the reaction's products have lower potential energy than its reactants. As energy is released to the environment during the reaction, it will feel warmer or hotter.

To Know more about Exothermic Reaction Visit:

brainly.com/question/10373907

#SPJ1

Answer:

To calculate the number of moles of solute in the given solution, we need to use the formula:

moles of solute = molarity × volume of solution (in liters)

Given:

Molarity of solution (M) = 0.25 M

Volume of solution (V) = 12.00 L

Using the formula:

moles of solute = 0.25 M × 12.00 L

moles of solute = 3.00 moles

Therefore, there are 3.00 moles of solute in 12.00 L of a 0.25 M solution.

Explanation:

Answer:

Batteries and steel fibres may both go through chemical reactions, although they usually do not interact. Batteries normally do not come into direct touch with steel fibres, and steel fibres used in concrete do not experience any chemical changes.

Explanation:

When used together, steel fibres and batteries normally don't have a chemical reaction. Concrete is frequently reinforced with steel fibres to improve its tensile strength and durability. The electrochemical devices known as batteries, on the other hand, transform chemical energy into electrical energy.

Batteries and steel fibres may both go through chemical reactions, although they usually do not interact. Batteries normally do not come into direct touch with steel fibres, and steel fibres used in concrete do not experience any chemical changes.

Under specific circumstances, such as if the battery's electrolyte leaked onto the steel fibres, there may be a chemical reaction between steel fibres and batteries. Nonetheless, this would be

Answer:

sunlight Comes from SUN.. a huge burning ball of gas that our planet revolves around

The name of the ionic compounds include:

2. BPo is Berry Polonium oxide

3. Bl₂Tu is Blueberry Tungsten dichloride

4. Cr₂Sn is Cranberry Tin oxide

5. LiSr₂ is Lime Strontium dichromate

6. Or₃Ba₂ is Orange Barium trioxide

Ionic compounds are chemical compounds formed by the electrostatic attraction between positively and negatively charged ions. They are composed of positively charged ions, called cations, and negatively charged ions, called anions. Ionic compounds are typically formed by the reaction of a metal with a nonmetal, or of a metal and a polyatomic ion.

In an ionic compound, the number of positive charges must equal the number of negative charges so that the compound has a neutral overall charge. Ionic compounds tend to have high melting and boiling points, as well as good electrical conductivity in their molten or dissolved states, but are typically brittle solids at room temperature.

Learn more about Ionic Compounds here: https://brainly.com/question/2687188
#SPJ1