A cross-country skier moves 36 meters eastward, then 44 meters westward, and finally 22 meters eastward.

Answer:

The correct answer is  C

Explanation:

  From the question we are told that  

       The frequency of the radar is [tex]f = 24.15 \ GHz = 24.15 *10^{9} \ Hz[/tex]

         The speed of the car is [tex]v = 50 mph = \frac{50}{2.237} = 22.35 \ m/s[/tex]

Generally the difference frequency reflected by the car and the frequency which the radar receives back is mathematically represented as

        [tex]\Delta f = \frac{f * 2 * v }{ c }[/tex]

Here  c is the speed of light with value  [tex]c = 3.0 *10^{8} \ m/s[/tex]

=>    [tex]\Delta f= \frac{2 * 24.15 *10^{9} * 22.35}{ 3.0*10^{8}}[/tex]      

=>    [tex]\Delta f = 4000 \ Hz[/tex]

=>     [tex]\Delta f = 4.0 \ kHz[/tex]  

Given that the value is positive then it a higher frequency

Answer:

E, A, B, F

Explanation:

The Middle Ear contains:

eardrum.

cavity (also called the tympanic cavity)

ossicles (3 tiny bones that are attached) malleus (or hammer) - long handle attached to the eardrum. incus (or anvil) - the bridge bone between the malleus and the stapes. stapes (or stirrup) - the footplate; the smallest bone in the body.

Answer: rawr

Explanation:

hammer

anvil

ear drum

stirrup

Answer:

2.1 m/s

Explanation:

According to law of conservation of momentum;

m1u1 + m2u2 = (m1+m2)v

m1 and m2 are the masses

u1 and u2 are the initial velocities

v is the common velocity

Given

m1 = 2150kg

m2 = 3250kg

u1 = 10.0m/s

u2 = ?

v = 5.22m/s

Substitute and get u2

2150(10) + 3250u2 = (2150+3250)5.22

21,500 + 3250u2 = 5400(5.22)

3250u2 = 28,188 - 21500

3250u2 = 6688

u2 = 6688/3250

u2 = 2.1 m/s

Hence the 3250 kg car’s initial velocity has an initial velocity of  2.1 m/s

Answer:

Thx for points merry Christmas answer 2

Explanation:

Answer:2

Explanation:

Answer:

We know that the carousel does a complete rotation in 45 seconds.

Then the frequency of this carousel will be f =  1/45 seconds.

And the angular frequency will be 2*pi times the frequency, then we have:

angular frequency = w = 2*3.14*(1/45s) = 0.1396 s^-1

Now, the linear speed of an object that rotates with a radius R, and an angular frequency W is:

S = R*W

then:

a) in this case the radius is 2.75m, then the linear speed is:

S = 2.75m*0.1396 s^-1 = 0.3839 m/s

b) in this case the radius is 1.75m, then the linear speed here is:

S = 1.75m*0.1396 s^-1 = 0.2443 m/s

(a) The linear speed of an outer horse on the carousel is 0.384 m/s.

(b) The linear speed of an inner horse on the carousel is 0.244 m/s.

Given data:

The time interval for the rotation of carousel is, t = 45 s.

The distance of the outer horse from the axis of rotation is, r = 2.75 m.

The distance of an inner horse from the axis of rotation is, r' = 1.75 m.

(a)

The linear speed in this problem can be obtained from the concept of rotational mechanic, in which the ratio of the circumference and the time gives required linear speed. So,

v = 2 π r/t

Solving as,

v = 2 π (2.75) / 45

v = 0.384 m/s

Thus, we can conclude that the linear speed of an outer horse on the carousel is 0.384 m/s.

(b)

Now similarly the linear speed of an inner horse is calculated as,

v' = 2 π r' / t

Solving as,

v' = 2 π (1.75) / 45

v' = 0.244 m/s

Thus, we can conclude that the linear speed of an outer horse on the carousel is 0.244 m/s.

Learn more about the rotational mechanics here:

https://brainly.com/question/18303026

Answer:

C) 0.00026 Hz

Explanation:

       [tex]v = \lambda * f (1)[/tex]

       [tex]f = \frac{v}{\lambda} = \frac{700km/hr}{750 km} = 0.93 1/hr (2)[/tex]

       [tex]f = 0.93 \frac{1}{hr} *\frac{1 hr}{3600sec} = 2.6e-4 = 0.00026 Hz (2)[/tex]

p = 36 kgm/s

v = 4m/s

we know that,

p = mv

so,

[tex]m = \frac{p}{v} [/tex]

[tex]m = \frac{36}{4} [/tex]

[tex]m = 9kg[/tex]

A would land before since its heavier

Answer:

1 rev = 2(pi) rad  pi(rad) = 180 degrees

so 33 rev/min * 1 min/60s * (2*pi)rad/1 rev *180 deg/ pi rad * .32 s = 63.36 degrees

Explanation:

63.36 estimated to 63 so 63

The angle in degrees where 33 rpm record turn in 0.32 s should be considered as the 63 degrees.

1 rev = 2(pi) rad

So here  pi(rad) = 180 degrees

Now for 33 rpm it should be like

=  33 rev/min * 1 min/60s * (2*pi)rad/1 rev *180 deg/ pi rad * .32 s

= 63.36 degrees

= 63 degrees

hence, The angle in degrees where 33 rpm record turn in 0.32 s should be considered as the 63 degrees.

Learn more about an angle here: https://brainly.com/question/3394547

Answer:

infared radiation

Explanation:

Answer:

None of the mass or the radius of the sphere

Explanation:

When a uniform solid sphere of any given mass, say M and any given radius, say R, rolls without slipping downwards an inclined plane that starts from rest. The linear velocity of the sphere at about the bottom of the inclined happens not to depend on either of its mass or that of the radius of its sphere.

Answer:

V2 = 1.899*10^-3 m^3

T2 = 347.125 K

Explanation:

Using gas law, we know that

PV = nRT,

Where

V1 = 0.00115743 m^3.

gamma = 1.4

Now, when we solve for final volume, V2 we get

V2 = V1/((P2/P1)^(1/gamma))

V2 = 1.899*10^-3 m^3

Using the same law and method, when we try to solve for the temperature, we find that the final temperature, T2 is

T2 = T1*((V1/V2)^(gamma-1))

T2 = 347.125 K

The final volume is 1.899*10^-3 m^3

And, the final temperature is 347.125 K

here we used gas law,

we know that

PV = nRT,

Here

V1 = 0.00115743 m^3.

gamma = 1.4

Now final volume is

V2 = V1/((P2/P1)^(1/gamma))

V2 = 1.899*10^-3 m^3

Now the final temperature is

T2 = T1*((V1/V2)^(gamma-1))

T2 = 347.125 K

Learn more about volume here: https://brainly.com/question/13011592

[tex] \underline{\purple{\large \sf Combination \: reaction :-}} [/tex]

Those reaction in which two or more substances combine to form a one new substance are called Combination reaction

In this reaction, We can add :

[tex] \underline{\green{\large \sf For\: example :}} [/tex]

[tex] \sf 2H_{2} + O_{2} \: \underrightarrow{Combination} \: 2H_{2}o[/tex]

In this, Hydrogen is an element and Oxygen is another element. Both are combined to form compound 'Hydrogen oxide'. Hydrogen oxide is commonly known as water.

Answer:

97.3 MJ

Explanation:

The formula for the coefficient of Perfomance is given as

COE = Q/W, where

COE is the coefficient of Perfomance

Q is the heat provided

W serves as the work input.

Dividing both sides of the equation by a factor of time t, we get the coefficient of Perfomance in terms of heating power and input power, so we say

COE = P / P(i),

making heating power, P the subject of formula, we have

P = COE * P(i)

P = 3.85 * 7020 * 1 * 3600

P = 97297200 J

P = 97.3 MJ

Given that,

Mass of the object, m = 1.2 kg

Initial speed of the object, u = 8 m/s

Final speed of the object, v = -6 m/s (in opposite direction)

Time, t = 2 ms

To find,

The average force on the object by the wall.

Solution,

Let F be the force. Using Newton's second law of motion,

F = ma, a is acceleration

[tex]F=\dfrac{m(v-u)}{t}\\\\F=\dfrac{1.2\times ((-6)-8)}{2\times 10^{-3}}\\\\=8400\ N[/tex]

or

F = 8.4 N

So, the magnitude of average force in the object by the wall is 8.4 N.

Answer:

The current is 11 Amperes

Explanation:

Electric Current

The electric current is defined as a stream of charged particles that move through a conductive path.

The current intensity can be calculated as:

[tex]\displaystyle I=\frac{Q}{t}[/tex]

Where:

Q = Electric charge

t   = Time taken by the charge to move through the conductor

The current intensity is often measured in Amperes.

The charge passing through a point in a circuit is Q= 55 c during t=5 seconds, thus the current intensity is:

[tex]\displaystyle I=\frac{55}{5}[/tex]

I = 11 Amp

The current is 11 Amperes

Answer:

The disk covers a rotation of 90º after 3 seconds.

Explanation:

Since the disk rotates at constant angular speed, we can determine the change in angular position ([tex]\Delta \theta[/tex]), measured in sexagesimal degrees, by the following kinematic formula:

[tex]\Delta \theta = \omega\cdot \Delta t[/tex] (1)

Where:

[tex]\omega[/tex] - Angular velocity, measured in sexagesimal degrees per second.

[tex]\Delta t[/tex] - Time, measured in seconds.

If we know that [tex]\omega= 30\,\frac{\circ}{s}[/tex] and [tex]\Delta t = 3\,s[/tex], then the change in angular position is:

[tex]\Delta \theta = \left(30\,\frac{\circ}{s} \right)\cdot (3\,s)[/tex]

[tex]\Delta \theta = 90^{\circ}[/tex]

The disk covers a rotation of 90º after 3 seconds.

Answer:

sounds like a you problem

Explanation:

yeah

Answer:

Those substances which can conduct electricity are called conductors, while those substances which don't conduct electricity are called insulators.

Resistance is the obstruction provided by the material through which the current passes,so since conductors conduct electricity and insulators don't,so the obstruction i.e resistance provided by the conductor must be less,while insulators being unable to conduct electricity,has very high resistance.

Example of conductor is copper

Example of insulator is plastic

Answer:

1B, 2B and 3C hope this helps

Explanation:

Answer:

B. Mass would be the same but its weight would be less on the Moon.

Explanation:

The mass of a body can be expressed as the quantity of matter it contains. While the weight of a body is the extent of the gravitational force impressed on the body by a massive body.

Thus, the mass of a body is constant either on the Earth or on the Moon. But the weight would be less on the Moon because the gravitational force on the Moon is far less than that on the Earth. Therefore the weight would be less on the Moon.

The appropriate option is B.

The mass will remain same on both moon and Earth, but weight will be lesser on Moon than Earth. Hence, option (B) is correct.

The prime focus to solve this problem is the mass and weight of an object. The mass of a body can be expressed as the quantity of matter it contains. While the weight of a body is the extent of the gravitational force impressed on the body by a massive body.

So, the mass of a body is constant either on the Earth or on the Moon. But the weight of an object will depend on the mass and the gravitational acceleration.

W = mg

Here, W is weight, m is mass and g is gravitational acceleration.

Weight would be less on the Moon because the gravitational force on the Moon is far less (due to lower value of g) than that on the Earth. Therefore the weight would be less on the Moon.

Thus, we can conclude that the mass will remain same on both moon and Earth, but weight will be lesser on Moon than Earth. Hence, option (B) is correct.

Learn more about the mass and weight here:

https://brainly.com/question/13040516

Asteroids are known through the help of artificial gravity, to have small gravity. The forces that cannot be neglected when analyzing the motion of the astronaut is that the gravitational force between the astronaut and the asteroid.

Unbalanced forces are simply known to be brought about due to a change in motion, speed, and/or direction. If two forces act in the same direction on an object, the net force is said to be equal to the sum of the two forces.

Learn more from

https://brainly.com/question/2784184

Answer:

The tension on the string is 2.353 N.

Explanation:

Given;

the speed of sound in air, v₀ = 343 m/s

then, the speed of sound on the string, v = 343 / 10 = 34.3 m/s

mass per unit length, m/l = μ = 0.002 kg/m

The speed of sound on the string is given as;

[tex]v = \sqrt{\frac{T}{\mu} } \\\\v^2 = \frac{T}{\mu} \\\\T = v^2 \mu[/tex]

where;

T is the tension on the string

T = (34.3)²(0.002)

T = 2.353 N

Therefore, the tension on the string is 2.353 N.

Answer:

all are true so d is right

Explanation:

Electromagnets use electrlcity and magnets is true.

Magnetic fields are strongest around the poles of a magnet is true.

The south pole of a magnet will repel the south pole of another magnet is true

and since all of them is true the answer is d all of the above

Answer:

c.

Explanation:

Answer:

[tex]31.32\ m/s[/tex]

Explanation:

[tex]We\ are\ given\ that:\\Height\ to\ which\ there're\ lifted=50m\\Displacement\ during\ the\ descent=50m\\Now,\\In\ order\ to\ find\ the\ velocity\ of\ the\ customers\ at\ 50\ m,\\We\ can\ use\ the\ Third\ Equation\ Of\ Motion,\ which is:\\2as=v^2-u^2\\As\ we\ know\ that,\\Acceleration\ due\ to\ gravity=9.81\ m/s^2\ or\ roughly\ 10\ m/s^2\\Displacement=50\ m\\Initial\ velocity=0\ m/s^2\\ [As\ they\ stop\ when\ they\ reach\ the\ maximum\ height\ of\ 50\ m\\ and\ begin\ their\ descent][/tex]

[tex]By\ reconstructing\ the\ Third\ Equation\ Of\ Motion,\ we\ have:\\2gs=v^2\\Hence,\\v^2=2*9.81*50 \\v^2=981\ m^2/s^2 \\v=\sqrt{981\ m^2/s^2} \\v=31.32\ m/s[/tex]

Answer: B

Explanation: the teacher just told us the answer

The gravitational force between the two spheres is [tex]1.67 \times 10^{-11} \ N[/tex].

The given parameters;

The gravitational force between the two spheres is determined by applying Newton's law of universal gravitation as shown below;

[tex]F = \frac{Gm_1 m_2 }{r^2} \\\\[/tex]

where;

[tex]F = \frac{(6.67\times 10^{-11})\times (1\times 1)}{2^2} \\\\F = 1.67 \times 10^{-11} \ N[/tex]

Thus, the gravitational force between the two spheres is [tex]1.67 \times 10^{-11} \ N[/tex].

Learn more here:https://brainly.com/question/13590473

Answer:

52.095 m/s

Motorcycle a was moving faster

Explanation:

We start by using one of the equations of motion

V = u + at

If the first motorcycle starts with an initial speed of u(a) and accelerates at a value of a(a) = 4.55 m/s², then the final speed after a time of 3.63 seconds is V(a). We then represent it as

V(a) = u(a) + a(a).t

If the second motorcycle starts with an initial speed of u(b) and accelerates at a value of a(b) = 18.9 m/s², then the final speed after a time of 3.63 seconds is V(b). We then represent it as

V(b) = u(b) + a(b).t

Assuming that the final speeds v(a) = v(b), and then subtract the equation of the second motorcycle from that of the first, we have

0 = u(a) - u(b) + a(a).t - a(b).t

-u(a) + u(b) = a(a).t - a(b).t, on rearranging, we have

u(b) - u(a) = [a(a) - a(b)]t

Since we have the values for acceleration and the time, we substitute so that

u(b) - u(a) = (4.55 - 18.9)3.63

u(b) - u(a) = -14.35 * 3.63

u(b) - u(a) = -52.095, or we rearrange to get

u(a) - u(b) = 52.095 m/s

Option B

Explanation:

no distance was given only the acceleration due to the fact that it went up (10m/s/s)

s0 it is

0 m/s and 10m/s/s (option B)