the percent yield of the reaction is 7.25%. in order to obtain 5.95 g of ethyl nitrate.
How to calculate the yield percentage ?
To calculate the percent yield, we need to know the theoretical yield and the actual yield of the reaction. The theoretical yield is the maximum amount of product that can be produced based on the amount of limiting reactant used in the reaction. The actual yield is the amount of product obtained from the reaction in the lab.
Assuming the reaction is:
Ethanol + Butyric acid → Ethyl butyrate + Water
The balanced equation is:
2 C₄H₈O₂ + 2 C₂H₅OH → 2 C₆H₁₂O₂ + 2 H₂O
The molar mass of ethyl butyrate (C₆H₁₂O₂) is 144.17 g/mol.
First, we need to calculate the theoretical yield of ethyl butyrate:
1 mol of butyric acid produces 1 mol of ethyl butyrate.
The molar mass of butyric acid (C₄H₈O₂) is 88.11 g/mol.
Therefore, the theoretical yield of ethyl butyrate can be calculated as follows:
Theoretical yield = (mass of butyric acid used / molar mass of butyric acid) x (molar mass of ethyl butyrate / 2)
Let's assume the chemist used 10 g of butyric acid:
Theoretical yield = (10 g / 88.11 g/mol) x (144.17 g/mol / 2) = 81.9 g
Next, we can calculate the percent yield using the actual yield and theoretical yield:
Percent yield = (actual yield / theoretical yield) x 100%
Given that the chemist obtained 5.95 g of ethyl butyrate, the percent yield can be calculated as follows:
Percent yield = (5.95 g / 81.9 g) x 100% = 7.25%
Therefore, the percent yield of the reaction is 7.25%.
To know more about reaction visit :-
https://brainly.com/question/11231920
#SPJ9
A solution contains 3.08 g of dissolved silver.
How many moles of potassium chloride must be added to the solution to completely precipitate all of the silver?
What mass of potassium chloride must be added?
Answer:
To determine the moles of potassium chloride required to completely precipitate all of the silver, we first need to write a balanced chemical equation for the reaction between silver and potassium chloride. The balanced chemical equation is:
AgNO3 + KCl → AgCl + KNO3
This equation shows that 1 mole of AgNO3 reacts with 1 mole of KCl to produce 1 mole of AgCl.
Next, we can calculate the moles of silver in the solution using its molar mass:
moles of Ag = mass / molar mass
moles of Ag = 3.08 g / 107.87 g/mol
moles of Ag = 0.0286 mol
Since the reaction between silver and potassium chloride is 1:1, we need the same number of moles of KCl as the number of moles of Ag:
moles of KCl = 0.0286 mol
Finally, to determine the mass of KCl required, we can use its molar mass:
mass of KCl = moles of KCl x molar mass
mass of KCl = 0.0286 mol x 74.55 g/mol
mass of KCl = 2.13 g
Therefore, we need to add 0.0286 moles of KCl (equivalent to 2.13 g) to completely precipitate all of the silver.
help me asap please, worth 15 point!
The order of given chemical reaction is three. the relationship between the rate of a chemical reaction and the concentration of the species taking part in it
What, with an example, is the order of reaction?
The total of the exponents that the concentration terms in the rate law are increased to determines the reaction's overall order. Take the products of the reaction aA+bB, for instance. Reactants A and B are in that sequence in the reaction, which is a and b, respectively. The reaction happens in the general order a+b.
What are order of reaction and rate law?A rate law demonstrates how the concentration of the reactant affects the rate of a chemical reaction. The rate law often takes the form rate = k[A]n for a reaction like aA products, where k is the proportionality constant referred to as the rate constant and n is the order of the reaction with respect to A.
To know more about chemical reaction visit:-
brainly.com/question/29039149
#SPJ1
The chemist discovers a more efficient catalyst that can produce ethyl butyrate with a 78.0 %
yield. How many grams would be produced from 8.55 g
of butanoic acid and excess ethanol?
Express your answer in grams to three significant figures.
Answer:
The balanced chemical equation for the reaction between butanoic acid and ethanol to produce ethyl butyrate is:
CH3CH2CH2COOH + C2H5OH → CH3CH2CH2COOC2H5 + H2O
From the equation, we can see that 1 mole of butanoic acid reacts with 1 mole of ethanol to produce 1 mole of ethyl butyrate and 1 mole of water. The molar mass of butanoic acid is 88.11 g/mol and the molar mass of ethyl butyrate is 116.16 g/mol.
To find out how many grams of ethyl butyrate can be produced from 8.55 g of butanoic acid, we first need to determine how many moles of butanoic acid are present:
moles of butanoic acid = mass / molar mass = 8.55 g / 88.11 g/mol = 0.097 mol
Since the reaction has a yield of 78.0%, we can calculate the theoretical yield of ethyl butyrate as follows:
theoretical yield = moles of butanoic acid × (1 mol ethyl butyrate / 1 mol butanoic acid) × 78.0%
= 0.097 mol × 1 × 0.78
= 0.0757 mol
Finally, we can calculate the actual mass of ethyl butyrate produced using its molar mass:
mass of ethyl butyrate = moles of ethyl butyrate × molar mass
= 0.0757 mol × 116.16 g/mol
= 8.80 g
Therefore, from 8.55 g of butanoic acid and excess ethanol, the chemist can produce 8.80 g of ethyl butyrate with the more efficient catalyst.
You add 11.00 mL of 0.700 M NaOH to 50.00 mL of pure water, and to this mixture you then add 1.00 mL of 0.200 M HCl. What will be the pH of the resulting solution?
Answer:
First, let's find the moles of NaOH:
moles NaOH = Molarity x Volume (L)
moles NaOH = 0.700 mol/L x 0.01100 L
moles NaOH = 0.00770 mol
Next, let's find the moles of HCl:
moles HCl = Molarity x Volume (L)
moles HCl = 0.200 mol/L x 0.00100 L
moles HCl = 0.00020 mol
Since NaOH and HCl react in a 1:1 ratio, we can see that all of the HCl will react with the NaOH and none will be left over. This means that the concentration of NaOH in the final solution is:
0.00770 mol / (0.01100 L + 0.05000 L) = 0.1027 M
Now we can find the pOH of the solution:
pOH = -log[OH-]
pOH = -log(0.1027)
pOH = 0.990
And finally, we can find the pH of the solution:
pH + pOH = 14
pH = 14 - 0.990
pH = 13.01
Therefore, the pH of the resulting solution is 13.01.
If an ideal gas has a pressure of 1.99 atm, a temperature of 124C and has a volume of 85.81L how many moles of gas are in the sample
To determine the number of moles of gas in the sample, we can use the Ideal Gas Law: PV = nRT
n = PV/RT
n = (1.99 atm)(85.81 L) / (0.0821 Latm/(molK) * 397.15 K)
n = 6.51 moles
Therefore, there are 6.51 moles of gas in the sample.
What is an ideal gas?An ideal gas is a theoretical gas composed of randomly moving point particles not subject to intermolecular interactions.
How can you describe the behavior of ideal gases?The ideal gas law describes the behavior of ideal gases, which relates the pressure, volume, temperature, and number of moles of a perfect gas. Natural gases do not strictly obey the ideal gas law, particularly at high pressures and low temperatures where intermolecular interactions become significant.
To learn more about temperature, visit here:
https://brainly.com/question/7510619
#SPJ1
How many moles of HCl are needed to get 10 moles of Cl2?
2 KMnO4 + 16 HCl ---> 2 KCl + 2 MnCl2 + 8 H2O + 5 Cl2
A. 16
B. 5
C. 32
D. 10
Answer:
A:16
Explanation:
it's one of those things where there is no way to explain it but I hope this helps
c
first balance the chemical equation / the equation is already balanced/
secondly write the given mole above the compound
then place the coefficient as a number of mole under the compound
after that set up the proportion
finally calculate the unknown mole
x/16 = 10/5
x=32
How many grams are present in 1.75 moles of carbon dioxide, CO2?
Answer:
To calculate the number of grams in 1.75 moles of CO2, we need to use the molar mass of CO2, which is 44.01 g/mol.
The calculation is:
1.75 mol CO2 x 44.01 g/mol = 77.0175 g CO2
Therefore, there are 77.0175 grams of CO2 in 1.75 moles of CO2.
Explanation:
Define an acid and a base according to the BrΦnsted-Lowry theory.
A base is a proton acceptor according to the Brnsted-Lowry classification of acids and bases, whereas an acid is a proton (H+) donor. A Brnsted-Lowry acid drops a proton, creating a conjugate base.
What exactly are bases and acids?Any hydrogen-containing substance that has the ability to donate a proton (hydrogen particle) to another substance is considered an acid. A base is a molecule or particle that can take on an acid's hydrogen ion.
According to the concepts of Lewis and Brnsted-Lowry, what are acids and bases?A Bronsted-Lowry base is a compound that can receive a hydrogen ion, whereas a Bronsted-Lowry acid can donate one. A substance that can give two electrons is known as a Lewis base.
To know more about proton acceptor visit:-
https://brainly.com/question/1252435
#SPJ1
A sample of oxygen was collected over water at 25.00°C and 0.886 atm. If the total sample volume was 2.92 L, how many moles of O2 were collected?
0.128 moles of O2 were collected.
What is the purpose of collecting the oxygen over water in this experiment?The purpose of collecting the oxygen over water is to prevent any other gas from entering the collection vessel. The water acts as a barrier to keep out other gases.
To determine the moles of O2 collected, we need to correct for the presence of water vapor in the sample. At 25.00°C, the vapor pressure of water is 23.76 mmHg or 0.0313 atm.
First, we can calculate the partial pressure of oxygen:
P(O2) = total pressure - vapor pressure of water
P(O2) = 0.886 atm - 0.0313 atm
P(O2) = 0.8547 atm
Next, we can use the ideal gas law to calculate the moles of O2:
n = PV/RT
where P is the partial pressure of O2, V is the volume of the sample, R is the gas constant (0.08206 L·atm/(mol·K)), and T is the temperature in Kelvin (25.00°C + 273.15 = 298.15 K).
n = (0.8547 atm)(2.92 L)/(0.08206 L·atm/(mol·K))(298.15 K)
n = 0.107 mol
Learn more about "moles" here:
https://brainly.com/question/26416088
#SPJ1
what are the different types of bond involved in sphingolipids?
Answer:
In sphingolipids, the hydrophobic region consists of a longchain sphingoid base with generally 18 carbons, such as sphingosine, which is linked to the acyl group of a fatty acid via an amide bond (R2). The hydrophilic region (R1) consists in the simplest case of a hydroxyl group in the case of ceramide.
Explanation:
Which shows the general structure of an ether?
C-O-R
OA. R
OB. R-O-R
Å
OC. ROH
OD. R-OH
SU
An ether's basic composition is as follows:
B. R-O-R
The oxygen atom is connected to two R groups, and R here stands for an alkyl or aryl group. Using the "oxy" group in place of the "alkyl" or "aryl" group, this structure is also referred to as an "alkoxy" group.
The two R groups could be the same or distinct. Ethers are a group of organic substances that are frequently employed as solvents, anesthetics, and chemical synthesis intermediate.
EtherA type of chemical compound known as ether has an oxygen atom attached to two alkyl or aryl groups. Ethers typically have the following structural makeup: R-O-R, where R stands for an aryl or alkyl group. Alcohols and ethers both have a carbon atom and an oxygen atom bound together in their structures. The oxygen atom is connected to two carbon atoms in ethers, whereas it is bonded to one carbon atom and one hydrogen atom in alcohols. Ethers are frequently employed as solvents in many industrial and laboratory procedures, as well as in the manufacture of drugs and other compounds. In medicine, they can also be employed as anesthetics.
learn more about ether here
https://brainly.com/question/20772030
#SPJ1
1. SEP Use Models The bingo chips represented atoms, and when combined they represented
molecules in the overall chemical reaction. Do you think that energy was absorbed or released
to rearrange the atoms?
Replacement is the reaction that occurs when one atoms swaps places with another in a compound or when two components in two separate compounds switch places.
Breaking chemical bonds between reactant molecules (particles) and creating new bonds between atoms in product particles are two aspects of chemical reactions (molecules). While there are the same number of atoms both before and after the chemical transition, there will be a change in the number of molecules.
When atoms establish or break chemical bonds, chemical processes take place. Reactants are the substances that begin a chemical reaction, while products are the compounds that are created as a result of the reaction.
When two atoms collide to create a heavier atom, such as when two hydrogen atoms combine to create one helium atom, this process is known as fusion. The sun is powered by a similar mechanism that generates enormous amounts of energy that are many times bigger than those produced by fission.
Learn more about atoms here
https://brainly.com/question/17756767
#SPJ1
You hear about a new amazing fertilizer called SuperGro. The company selling it claims that using this fertilizer will double your tomato harvest! Sounds great but as a skeptical consumer you ask for a sample so that you can conduct an experiment in your garden before you buy a big bag of his fertilizer.
state a good hypothesis for your fertilizer experiment describe the experiment you would conduct .identify the control and experimental groups/treatments . identify the dependent and independent variables
• name two control variables
•make up hypothetical results
• state a conclusion
Answer:
Hypothesis: If I use SuperGro fertilizer on my tomato plants, then the harvest will be greater than if I do not use the fertilizer.
Experiment: I would divide my tomato plants into two groups. The first group would be the control group and receive no fertilizer. The second group would be the experimental group and receive SuperGro fertilizer. I would use the same type and number of tomato plants in both groups and plant them in the same location with the same amount of sunlight and water.
Control group: Tomato plants that receive no fertilizer
Experimental group: Tomato plants that receive SuperGro fertilizer
Independent variable: SuperGro fertilizer
Dependent variable: Tomato harvest
Control variables: type and number of tomato plants, location, amount of sunlight and water
Hypothetical results: The tomato plants in the experimental group that received SuperGro fertilizer produced double the amount of tomatoes compared to the tomato plants in the control group that did not receive fertilizer.
Conclusion: Based on the results of the experiment, it can be concluded that SuperGro fertilizer does have a significant effect on increasing tomato harvest. Therefore, using SuperGro fertilizer can be recommended for individuals who want to increase their tomato harvest.
Explanation:
65g of NaCl are placed in a beaker and enough water is added to fill the beaker to 1 liter. What is the molarity of this solution?
The molarity of the solution is 1.112 M. To calculate the molarity of a solution, you need to know the amount of solute (in moles) and the volume of the solution (in liters).
What is the normalcy unit?The number of moles per litre of solution is how it is defined. It is employed to calculate the gramme equivalent in respect to the entire solution volume. It is employed for calculating the mole ratio in the solution's overall volume. Normality is measured in N or eq L-1 units.
First, you need to convert the given mass of NaCl into moles. The molar mass of NaCl is 58.44 g/mol.
Number of moles of NaCl = 65 g / 58.44 g/mol = 1.112 mol
Now, you can calculate the molarity of the solution using the formula:
Molarity = Number of moles of solute / Volume of solution in liters
Molarity = 1.112 mol / 1 L
Molarity = 1.112 M
To know more about molarity visit:-
brainly.com/question/8732513
#SPJ1
A snowstorm is located 140 miles away from your town.It's moving at a speed of 35 miles per hour. According to the trends method of forecasting,when will it arrive? A.in about 4 hours B.in about 2 hours C.in about 45 minutes D. not enough information is given
According to the trends method of forecasting, the snowstorm will arrive in about 4 hours with speed of 35 miles/hr. The correct answer is option A.
We can use the formula:
Time = Distance / Speed
to calculate the time it will take for the snowstorm to reach your town.
The distance between the snowstorm and your town is 140 miles, and it is moving at a speed of 35 miles per hour.
Time = 140 miles / 35 miles per hour
Time = 4 hours
The solution provided above uses the formula:
Time = Distance / Speed
This formula relates the time it takes for an object to travel a certain distance to the speed at which it is traveling. In this case, the object is the snowstorm, the distance is the distance between the snowstorm and your town (140 miles), and the speed is the speed at which the snowstorm is moving (35 miles per hour).
When we divide the distance (140 miles) by the speed (35 miles per hour), we get a result of 4 hours. This means that it will take the snowstorm 4 hours to travel the distance of 140 miles and reach your town. The trends method of forecasting assumes that the speed and direction of the snowstorm will remain constant, and therefore we can use this formula to estimate the time it will take for the snowstorm to arrive. It is important to note that this method is based on the assumption that the speed and direction of the snowstorm will not change, and therefore may not be accurate in all situations. Additionally, weather forecasting is a complex process that involves many factors, and the trends method is just one of many methods used to forecast weather.
To know more about Speed please refer: https://brainly.com/question/30265720
#SPJ1
If a flask initially contains 1.0 atm
of A
and 1.5 atm
of B
, what will be the pressure in the flask if the reaction proceeds to completion? (Assume constant volume and temperature.)
The pressure in the flask if it proceeds to completion would be given as 2.5 atm
How to solve for the pressureUsing Dalton's partial pressure law, this states that Dalton's law of partial pressures states that the total pressure of a gas mixture is equal to the sum of the partial pressures of each component gas. In other words, in a mixture of gases, the pressure contributed by each gas is independent of the pressure of the other gases present.
Mathematically, Dalton's law can be expressed as follows:
P_total = P_A + P_B + ... + P_n
hence we would have
1.5 atm + 1.0 atm
= 2.5 atm
Read more on pressure here:https://brainly.com/question/25736513
#SPJ1
Which of the following about the
Lockout/Tagout process are TRUE?
(select all that apply)
Out-of-service equipment may be tagged after being locked out
No training is necessary to perform lockout/tagout procedures
Process to lockout/tagout equipment is always the same
Lockout/Tagout direct wired equipment at energy source
Answer:
Lockout/Tagout direct wired equipment at energy source
Explanation:
The purpose of Lockout Tagout (often referred to as LOTO) is to keep the affected employees in the area from any active energy sources on a machine. The best way to isolate hazardous energy is to isolate it at the energy source to dissipate all hazardous energy that could harm an affected employee.
Calculate the formula mass of each compound. Keep at least one decimal place in atomic masses from the periodic table.
HFO2
The molecular formula of HFO2 tells us that it contains one hydrogen atom (H), one fluorine atom (F), and two oxygen atoms (O). The atomic masses of H, F, and O are 1.0, 19.0, and 16.0 g/mol, respectively.
Calculation-Formula mass = (1 x atomic mass of H) + (1 x atomic mass of F) + (2 x atomic mass of O)
= (1 x 1.0 g/mol) + (1 x 19.0 g/mol) + (2 x 16.0 g/mol)
= 1.0 g/mol + 19.0 g/mol + 32.0 g/mol
= 52.0 g/mol
What is the formula for calculating mass?By adding the masses of each individual atom in the compound's formula, the formula mass is determined. The ions can be regarded as atoms for the purposes of determining the formula mass since a valid formula is electrically neutral (with no net electrons gained or lost).
to know more about atomic masses here:
brainly.com/question/17067547
#SPJ1
Molecular hydrogen and oxygen combine to form water. If you have 10.00g of oxygen and 10.0g of hydrogen react, once the reaction is complete, which reactant would you have left over and how much of it would you have left over?
The amount of hydrogen left over is 9.683 g.
Which reactant would you have left over?The balanced chemical equation for the reaction between molecular hydrogen (H₂) and oxygen (O₂) to form water (H₂O) is:
2H₂ + O₂ -> 2H₂O
The equation shows that two moles of hydrogen react with one mole of oxygen to produce two moles of water.
To determine which reactant is left over, we need to calculate how much of each reactant is required for the reaction and compare it with the actual amount provided.
The reactant that is not completely consumed will be left over.
First, we need to convert the masses of hydrogen and oxygen to moles using their respective molar masses:
Molar mass of hydrogen (H2) = 2.016 g/mol
Molar mass of oxygen (O2) = 31.9988 g/mol
Number of moles of hydrogen = 10.0 g / 2.016 g/mol = 4.96 mol
Number of moles of oxygen = 10.00 g / 31.9988 g/mol = 0.3125 mol
From the balanced equation, we can see that 2 moles of hydrogen react with 1 mole of oxygen.
Therefore, the number of moles of oxygen required to react with 4.96 moles of hydrogen is:
0.5 x 4.96 = 2.48 mol
Since we only have 0.3125 mol of oxygen, it is the limiting reactant, and hydrogen is in excess.
To find out how much hydrogen is left over, we need to calculate how much hydrogen was used in the reaction:
Number of moles of water produced = Number of moles of oxygen used = 0.3125 mol
Number of moles of hydrogen used = 0.5 x 0.3125 = 0.15625 mol
The total number of moles of hydrogen we started with was 4.96 mol, and 0.15625 mol of hydrogen was used in the reaction.
Therefore, the amount of hydrogen left over is:
4.96 mol - 0.15625 mol = 4.80375 mol
Finally, we can convert this back to a mass:
Mass of hydrogen left over = 4.80375 mol x 2.016 g/mol = 9.683 g
Learn more about reactant here: https://brainly.com/question/26283409
#SPJ1
Answer:
The amount of hydrogen left over is 9.683 g.
Explanation:
Is [HN.CHR-CO]n a homo polymer or a copolymer
Answer:(−NH−CHR−CO−)n is a homopolymer. The reason is that it has a single monomer (NH2−CHR−COOH), α−amino acid.
If a polymer consists of only one kind of monomer then it is called a homopolymer, while a polymer that consists of more than one kind of monomer is called a copolymer
Ibuprofen is the most common pain reliever found in medicines. If Motrin contains 0.8 g of ibuprofen in a 500 mL bottle, what is the concentration of ibuprofen in a bottle of Motrin?
Answer:
1.6 g/L
Explanation:
To calculate the concentration of ibuprofen in a bottle of Motrin, we need to divide the amount of ibuprofen (in grams) by the volume of the bottle (in liters).
First, we need to convert the volume of the bottle from milliliters (mL) to liters (L):
500 mL = 0.5 L
Now we can calculate the concentration:
Concentration = Amount of ibuprofen / Volume of bottle
Concentration = 0.8 g / 0.5 L
Concentration = 1.6 g/L
Therefore, the concentration of ibuprofen in a bottle of Motrin is 1.6 g/L.
1. A 0.4 L sample of gas is collected at a temperature of 45°C. At what temperature will the gas fill a 0.725 L container?
The temperature of sample gas that fills a 0.725L container is 576K which initially is collected in a 0.4L container at a temperature of 318K.
Given the volume of a sample gas (V1) = 0.4L
The temperature of gas (T1) = 45°C = 273 + 45 = 318K
The volume of container that fills gas (V2) = 0.725L
The temperature of gas at volume V2 = T2
We know that from ideal gas laws, the volume of gas and temperature are directly related to each other where its equation is: PV = nRT
If we assume the pressure is constant, then,
From the above equation we can say that:
V1/T1 = V2/T2
0.4/318 = 0.725/T2
T2 = 576.315K
To learn more about temperature click here https://brainly.com/question/29072206
#SPJ1
A sample of the compound weighs 80 grams. How many grams of cobalt are in the sample?
Cobalt weighs 58.93 g/mol, or 1 mole. Hence, the sample of cobalt weighs 4. 89 10 2 grammes.
What is the cobalt worth?Basic Details. The price of US cobalt is currently 48874.36, down from 51497.77 last month and 70527.05 last year. The difference from the previous month and one year ago is -5.09% and -30.70%, respectively.
What is the purpose of cobalt?In addition, cobalt is used to create ground coats for porcelain enamels, cemented carbides (also known as hardmetals), diamond tools, corrosion- and wear-resistant alloys, airbags for automobiles, catalysts for the petroleum and chemical industries, drying agents for paints, varnishes, and inks, dyes, and pigments.
To know more about cobalt visit:-
https://brainly.com/question/28062906
#SPJ1
the ink in a marking pen contains a mixture of water, pigments, and dyes if different colors. In this solution identify the solvent and solutes
The solvent in a marking pen is water, and the solutes are the pigments and dyes that provide the color.
What are solvents and solute?In a solution, the solvent is the substance that dissolves the solute. It is the component that is present in the greatest amount and provides the medium for the solute to be dissolved in.
In the case of a marking pen, the solvent is water. Water is a common solvent because it has a high polarity, which means it can dissolve many substances that have polar or ionic bonds.
The solutes in a marking pen are the pigments and dyes that provide the color. These are substances that are insoluble in water but are suspended in the water-based solution in the pen.
The pigments and dyes are dissolved in the water to create a homogeneous solution that can be used for writing and marking on surfaces.
Learn more about solution here: https://brainly.com/question/25326161
#SPJ1
In the combustion reaction between propane and oxygen gas, if 14.0 g of propane is burned in 102.0g of oxygen. How many total grams of products will be formed if the Law of Conservation of Mass is fulfilled?
In order to satisfy the Law of Conservation of Mass, 64.7 grammes of items must be produced.
What is the balanced formula for propane's complete C3H8 combustion?The following diagram illustrates the balanced chemical equation for propane combustion: C 3 H 8 ( g ) ( g ) Propane plus O2O ( g ) CO2 3 Oxygen ( g ) Carbon dioxide + 4 hydrogen ions ( l ) Heat plus water.
We must create a balanced chemical equation for propane combustion in order to resolve this issue:
C3H8 + 5O2 → 3CO2 + 4H2O
We must figure out how many moles of oxygen and propane are used in the reaction.
moles of propane = 14.0 g / 44.1 g/mol = 0.317 mol
moles of oxygen = 102.0 g / 32.0 g/mol = 3.1875 mol
moles of oxygen used = 0.317 mol x 5 = 1.585 mol
moles of oxygen left over = 3.1875 mol - 1.585 mol = 1.6025 mol
we can use the mole ratios in the balanced equation to determine the moles of products formed:
moles of carbon dioxide = 3 x 0.317 mol = 0.951 mol
moles of water = 4 x 0.317 mol = 1.268 mol
Now we can calculate the total mass of the products:
mass of carbon dioxide = 0.951 mol x 44.01 g/mol = 41.8 g
mass of water = 1.268 mol x 18.02 g/mol = 22.9 g
Total mass of products = mass of carbon dioxide + mass of water
= 41.8 g + 22.9 g
= 64.7 g
To know more about Conservation visit:-
https://brainly.com/question/28711001
#SPJ1
H3PO4 + 3 NaOH- -->Na3PO4 + 3 H₂O If 36.0 ml. of H3PO4 react exactly with 80.0 ml. of 0.500 M NaOH, what is the concentration of the phosphoric acid?
The concentration of phosphoric acid is 1.11 M.
What is phosphoric acid ?
Phosphoric acid is a colorless, odorless phosphorus-containing solid, and inorganic compound with the chemical formula H₃PO₄.
To determine the concentration of the phosphoric acid (H3PO4) in this reaction, we can start by using the balanced chemical equation:
H3PO4 + 3 NaOH → Na3PO4 + 3 H2O
From the equation, we can see that 1 mole of H3PO4 reacts with 3 moles of NaOH. Therefore, we can first calculate the number of moles of NaOH in the reaction:
moles of NaOH = volume of NaOH × concentration of NaOHmoles of NaOH = 80.0 mL × 0.500 mol/Lmoles of NaOH = 0.040 molSince the reaction is a 1:1 ratio between H3PO4 and NaOH, the number of moles of H3PO4 is also 0.040 mol.
Next, we can calculate the concentration of H3PO4:
concentration of H3PO4 = moles of H3PO4 / volume of H3PO4
volume of H3PO4 = 36.0 mL = 0.036 L
concentration of H3PO4 = 0.040 mol / 0.036 L
concentration of H3PO4 = 1.11 M
Therefore, the concentration of phosphoric acid is 1.11 M.
Learn more about phosphoric acid here : brainly.com/question/14665590
#SPJ1
Regular treatment with low-dose aspirin is used to help prevent cardiovascular disease. How many aspirin molecules are in 200 mg of aspirin? The molecular formula for aspirin is C9H8O4.
Answer:
The molar mass of aspirin (C9H8O4) can be calculated as follows:
1 mol C = 12.01 g
9 mol C = 9 x 12.01 g = 108.09 g
8 mol H = 8 x 1.01 g = 8.08 g
4 mol O = 4 x 16.00 g = 64.00 g
Total molar mass of aspirin = 180.17 g/mol
To determine the number of aspirin molecules in 200 mg of aspirin, we first need to convert the mass of aspirin to moles:
200 mg aspirin x (1 g / 1000 mg) x (1 mol / 180.17 g) = 0.001110 moles aspirin
Next, we use Avogadro's number to convert moles of aspirin to molecules:
0.001110 moles aspirin x 6.022 x 10^23 molecules/mol = 6.68 x 10^20 aspirin molecules
Therefore, there are approximately 6.68 x 10^20 aspirin molecules in 200 mg of aspirin.
Please answer this ASAP
What was Aesthetically Pleasing?
What dance was the most aesthetically pleasing to you visually, physically, and choreographically. Why?
5 pts
This criterion is linked to a Learning Outcome Compare Movements viewed in Concert and in Textbook / Videos.
Identify and compare movement style(s) in concert to what you have found in your textbook. Write out and identify the Chapter(s) and page number(s) along with your answer.
5 pts
This criterion is linked to a Learning Outcome General Qualities of African Dance
Name 3 General Qualities of African American Dance from pgs 20-27 in your textbook that you recognize from the choreography in the concert. List and describe those qualities.
5 pts
Answer:
an object or item that someone considers to be beautiful or attractive.
What is the C - O bond order in carbon dioxide?
Answer:
The bond order between carbon and oxygen in carbon dioxide (CO2) is two.
The Lewis structure of CO2 shows that each of the two double bonds (C=O) consists of one sigma bond and one pi bond. The bond order is the number of electron pairs being shared by a pair of atoms in a molecule, divided by the number of chemical bonds between the same pair of atoms. In CO2, there are two double bonds between carbon and oxygen, and each double bond has a bond order of 2. Therefore, the overall bond order between carbon and oxygen in CO2 is 2.
What is the mass of KCI in a 1.50 g sample of iodized salt, which is a mixture of NaCl
and KCI) that is 60.7% KCI?
The sample of iodized salt contains 0.9105 g of KCI, which is a mixture of NaCl and KCI with a KCI content of 60.7%.
How can the mass of KCI in a 1.50 g sample of iodized salt, a mixture of NaCl and KCI with a 60.7% KCI content, be determined?KCI makes up 60.7% of the sample's total mass, and NaCl makes up the remaining portion (100% - 60.7%) of the sample's mass.
Firstly, let's determine the mass of NaCl in the sample:
NaCl mass is equal to (0.5935 g) (100% - 60.7%)*1.50 g.
We can now determine the mass of KCI:
KCI mass equals 60.7% * 1.50 g = 0.9105 g
KCI thus has a mass of 0.9105 g in the iodized salt sample.
To learn more about iodized salt visit:
brainly.com/question/26888488
#SPJ1