A 750.0 mL metal bulb is filled with 42.1 g of CH4 and 3.23 g of NH3. If the amount of pressure contributed by CH4 is 111.2 atm, then what is pressure due to NH3?

Answer:

carboxylic acid

Explanation:

i think so

pls mrk me brainliest

In summary, the invention of the Haber process led to the production of synthetic fertilizers, which reduced the demand for natural nitrates from mines like Humberstone, ultimately leading to its closure.

The invention of the Haber process, which is a method of synthesizing ammonia from nitrogen and hydrogen gas, allowed for the production of large amounts of fertilizer. This increased the amount of farmland that could be cultivated and substantially increased crop yields. As a result, the demand for natural resources like nitrate-based fertilizers, which were previously extracted from mines like Humberstone in Chile, decreased significantly.

Humberstone was one of the largest nitrate mines in Chile and was known for producing high-quality nitrate fertilizers. However, the increased production of synthetic fertilizers through the Haber process meant that the demand for natural nitrate-based fertilizers gradually declined. The falling demand for natural nitrates eventually led to the closure of many nitrate mines like Humberstone in Chile.

In addition to the Haber process, other factors such as the discovery of cheaper sources of natural nitrates in other parts of the world and the decline in the price of nitrate also contributed to the closure of the Humberstone mines.

To know more about Haber process go through:-

https://brainly.com/question/21867752

#SPJ4

Separation of mixtures is the process of isolating and purifying individual components from a mixture. It has a wide range of applications in various fields, including chemistry, biology, and environmental science. Here are ten beneficial effects of separation of mixtures:

Helps to obtain pure substances: Separation of mixtures helps in obtaining pure substances, which are essential for research and industrial processes.

Enables identification of individual components: Separation of mixtures allows the identification and characterization of individual components in a mixture.

Allows the removal of impurities: Separation of mixtures can be used to remove impurities from a mixture, which can improve the quality of the final product.

Facilitates recycling: Separation of mixtures is crucial for recycling materials such as plastic, paper, and metals.

Enables selective extraction: Separation of mixtures can be used to selectively extract specific components from a mixture.

Helps in drug development: Separation of mixtures is important in drug development, where pure compounds are required for testing and clinical trials.

Helps in forensic analysis: Separation of mixtures is used in forensic analysis to identify and analyze evidence.

Facilitates food processing: Separation of mixtures is used in the food industry to extract and purify ingredients.

Enables the production of clean energy: Separation of mixtures is used in the production of clean energy, such as separating hydrogen from other gases.

Helps in environmental remediation: Separation of mixtures is used in environmental remediation to separate and remove pollutants from soil, water, and air.

To learn more about mixture refer to:

brainly.com/question/2800536

#SPJ4

The IR spectrum of an unknown compound displays considerable stretches at 3353 cm-1 (m, br) and 2900 cm-1 (s, sh).

The significant stretches at 3353 cm-1 (m, br) and 2900 cm-1 (s, sh) indicate that the compound could be an alcohol. This is because, in the infrared (IR) spectrum, the functional group -OH (hydroxyl group) of alcohols gives a strong peak at approximately 3200 to 3500 cm-1, which is a broad, intense peak. The peak intensity is determined by the number of -OH groups in the alcohol.In addition, the peak at 2900 cm-1 corresponds to a C-H bond, most likely the CH stretch of an aliphatic (saturated) hydrocarbon. As a result, the compound may be an aliphatic alcohol, which has the formula CnH2n+1OH, where n is any integer greater than or equal to one. Some possible examples of such alcohols include methanol (CH3OH), ethanol (C2H5OH), and propanol (C3H7OH).

Know more about compound displays

https://brainly.com/question/28587527

#SPJ11

We can see that the closest molar mass to 3.93 g/mol is that of Lithium (Li) which is 6.94 g/mol.

Therefore, the element is Lithium (Li).

To determine the element, we need to use the molar mass of each element to find the number of moles present in the sample. We can then compare the number of moles to the Avogadro's number to determine the number of atoms.

The molar mass of an element is the mass of one mole of the element in grams. We can calculate the number of moles by dividing the mass of the sample by the molar mass of the element.

Let's assume that the element is X. The molar mass of X can be calculated by dividing the mass of the sample by the number of moles present in the sample:

molar mass of X = 13.7 g / (2.1 x 10²³ atoms / Avogadro's number)

where Avogadro's number is 6.022 x 10^23 atoms/mol.

molar mass of X = 13.7 g / 3.49 mol

molar mass of X = 3.93 g/mol

Now, we can compare the molar mass of X to the molar masses of known elements to determine the element. From the periodic table, we can see that the closest molar mass to 3.93 g/mol is that of Lithium (Li) which is 6.94 g/mol.

Therefore, the element is Lithium (Li).

To learn more about molar mass, visit:

https://brainly.com/question/21334167

#SPJ1

A novel mutation is most likely the cause of the appearance of a black mouse within a population of light mice , those are inconsistent and rare events.

Fur color is influenced by several genes (4:29). The majority of genes are similar, but one gene (Mc1r) separates light and dark rock pocket mice. 4:55). The color of a mouse's fur is influenced by the genotype of the MC1R gene, according to Data Set 2. Mice that have two copies of allele 2 have the fur that is the darkest.

The dark-colored mice were the result of a random mutation in the population at site A. The trait did not spread because it did not benefit the mice from selection.

Learn more about dark-colored mice :

brainly.com/question/22664929

#SPJ1

The ΔH for the reaction [tex]NO (g) + O (g) = > NO^2 (g)[/tex] is 154kJ.

To calculate this, we need to add the ΔH values from the other reactions:
[tex]NO (g) + O^{3} (g)[/tex]→[tex]NO^{2} (g) + O^2(g)[/tex], ΔH =-199 kJ
[tex]O^3 (g)[/tex]→[tex]32O^2[/tex] (g), ΔH =-142 kJ

[tex]O^2[/tex] (g)→2O (g), ΔH =+495 kJ

Therefore, the ΔH for the reaction [tex]NO (g) + O (g) = > NO^2[/tex] (g) is:

(-199 kJ) + (-142 kJ) + (495 kJ) = 154kJ

First, we need to reverse the third reaction:

[tex]2O (g) = > O^2[/tex] (g), ΔH = -495 kJ

Now, we can add the first and the reversed third reactions to cancel out the O2 term and get the given reaction:

[tex]NO (g) + 2O (g) = > NO^2 (g)[/tex], ΔH = -199 kJ - (-495 kJ) = +296 kJ

Finally, we can use the second reaction to convert the ozone term to oxygen:

[tex]O^3 (g) = > 3O^2 (g)[/tex], ΔH = -142 kJ (multiply by 3 to cancel out the O2 term)

[tex]3O (g) = > O^3 (g)[/tex], ΔH = +142 kJ (reverse the equation)

Adding this equation to the previous one, we get:

[tex]NO (g) + O (g) = > NO^2 (g)[/tex], ΔH = +296 kJ + (-142 kJ) = 154 kJ

The ΔH for the given reaction is 154 kJ.

For more question on reactions click on

https://brainly.com/question/11231920

#SPJ11

The final solution has a pH of 1.17.

The pH of the final solution can be calculated by using the equation:

pH = -log[H+]

Where [H+] is the concentration of hydrogen ions in the solution.Hydrogen ions, also known as protons, are positively charged particles that are found in solutions.

To calculate the concentration of hydrogen ions, we need to calculate the molarity of the solution.

Molarity of HCl =[tex]\frac{ (52.3 mL * 0.1000 mol/L) }{ (1000 mL/L) }[/tex]

                          [tex]= 0.0523 mol/L[/tex]

Molarity of HNO3 = [tex]\frac{(15.8 mL * 0.1000 mol/L) }{(1000 mL/L) }[/tex]

                             [tex]= 0.0158 mol/L[/tex]

Total molarity of the solution = 0.0523 + 0.0158 = 0.0681 mol/L

[H+] = 0.0681 mol/L

pH = -log[H+]

       = -log(0.0681)

pH = 1.17

Therefore,The pH of final solution is 1.17.

learn more about  hydrogen ions refer:brainly.com/question/7641960

#SPJ1

The coordination number for a single atom inside of a 3-dimensional close-packed structure is 12.

The coordination number for a single atom inside of a 3-dimensional close-packed structure is 12. This is because in a close-packed structure, each atom is surrounded by 12 other atoms, 6 in the same plane and 3 in the plane above and 3 in the plane below. This is true for both hexagonal close-packed (HCP) and face-centered cubic (FCC) structures, as the coordination number is determined by the number of atoms "touching" a given atom and is the same for every atom in the structure.

To learn more about Coordination :

https://brainly.com/question/29588480

#SPJ11

Chlorine serves as the reaction's limiting reagent, and sodium serves as the reaction's reagent. The point of equivalency, known as endpoint of the reaction, where the mass of sodium and mass of chlorine are equal.

The white, crystalline substance sodium chloride, or ordinary table salt, which comprises sodium cations and chloride anions, is created by a powerful reaction between the elements sodium and chlorine.

Because each chemical equation must be balanced and the amount of atoms of each element on the reactant side must match the number of atoms of each other, chemical equations serve as examples of the law of conservation of mass.

To know more about limiting reagent visit:-

https://brainly.com/question/11848702

#SPJ1

Heat travels through surface currents in a process known as convection.

Convection occurs when heat is transferred through a fluid or gas, such as air or water, through the movement of the fluid or gas itself. In this process, warmer, less dense fluid or gas rises, while cooler, denser fluid or gas sinks. This creates a continuous flow or current, which transfers heat from one place to another. Therefore, we can infer that heat travels through surface currents by the transfer of energy through the movement of fluids or gases. Convection is an important process in the transfer of heat because it can occur in fluids or gases that are otherwise stationary, such as the air in a room or the water in a pot on a stove.

learn more about convection here:

https://brainly.com/question/4138428

#SPJ4

If the initial concentration of base b in solution is 0.18 m. if the pH of the solution at equilibrium is 13.190, the percent ionization of the base is 78.3.

Calculating the concentration of hydroxide ions (OH⁻) in the solution at equilibrium is necessary to ascertain the base's percent ionization.

It is observed that the solution is basic, so use the following relationship:

pOH + pH = 14

According to question, the pH at equilibrium is 13.190, so find the pOH:

pOH = 14 - 13.190

= 0.810

Now, change pOH to [OH⁻] concentration:

[OH⁻] = [tex]10^_(-pOH)}[/tex]

= [tex]10^{-0.810}[/tex]

= 0.141 M

The concentration of [OH⁻] at equilibrium is 0.141 M.

To find the percent ionization of the base, it is required to compare the concentration of [OH⁻] at equilibrium with the initial concentration of the base.

Percent ionization = ([OH] / [B]) × 100

Place the values, it is observed that:

Percent ionization = (0.141 M / 0.180 M) × 100

= 78.3

The base has a 78 percent ionization rate, rounded to the closest whole number.

Thus, the base has a 78 percent ionization rate, rounded to the closest whole number.

Learn more about percent ionization, here:

https://brainly.com/question/30060037

#SPJ6

Answer: I put 78 on my homework and got it wrong. The computer said it was 86%

Explanation:he percent ionization is the ratio of the hydroxide ion concentration at equilibrium to the initial concentration of the base, multiplied by 100. Based on the pH, the equilibrium concentration of hydroxide ions is

[OH−]=10−(14.000−pH)=10−0.810=0.155

Therefore, the percent ionization is

0.155 M0.18 M×100=86%

Diffusion and aeration, photosynthesis, respiration, and decomposition all have an ongoing impact. In addition to fluctuating dissolved oxygen levels caused by temperature, salinity, and pressure fluctuations.

In comparison to warm water, cold water can hold more dissolved oxygen. The concentration of dissolved oxygen is highest in the winter and early spring when the water temperature is low. The concentration of dissolved oxygen is frequently lower in the summer and fall when the water temperature is high.

Water molecules receive energy as a result of rising water temperatures, which in turn causes gas and water molecules to gain more energy. This increased energy dissolves the water and oxygen molecules' weak molecular bonds, allowing oxygen to escape.

To know more about decomposition visit-

https://brainly.com/question/8009068

#SPJ1

Answer:

Need the reast of the question.  Like the reactants or equation

Explanation:

a decrease in oxygen levels in the blood during exercise

an artificial light that attracts insects

stimulus is an example of an internal stimulus

 Things like oxygen levels, blood sugar and pH levels, water levels, and internal temperature are examples of internal stimuli. If any of these factors becomes too high or too low, the body will react in order to reestablish homeostasis.

There are both internal and exterior stimuli. One illustration of external stimulation is how your body reacts to drugs. Vital sign alterations brought on by internal body changes are an example of internal stimulation.

learn more about homeostasis

https://brainly.com/question/24882789

#SPJ1

A sample lab report form based on the given parameters is given below:

Title: Investigating the Efficiency of Solar Panels in a Residential Setting

Introduction:

The purpose of this experiment was to investigate the efficiency of solar panels in a residential setting. The primary focus was on analyzing the output power of the solar panels under various conditions, such as the angle of incidence of sunlight and the distance from the light source.

Problem and Constraints:

The main problem was to ensure that the experiment was conducted in a controlled environment to obtain accurate results. Other constraints included the availability of equipment and weather conditions.

Plan and Design:

To conduct this experiment, a small-scale solar panel was set up in a controlled environment. The experiment involved measuring the output power of the solar panel under different conditions, including the angle of incidence of sunlight and the distance from the light source. The data collected was analyzed using statistical methods.

Procedure:

The solar panel was placed in a location where it would receive sunlight throughout the day. The angle of incidence was varied using an adjustable stand. The distance from the light source was also varied by moving the solar panel closer or farther from the light source. The output power of the solar panel was recorded at each variation of the angle of incidence and distance.

Evaluation and Revision:

The results showed that the efficiency of the solar panel decreased as the angle of incidence of sunlight increased. Similarly, as the distance from the light source increased, the efficiency of the solar panel decreased. Based on these results, we revised our experiment by adjusting the position of the solar panel to optimize its output power.

Conclusion:

In conclusion, the experiment successfully investigated the efficiency of solar panels in a residential setting. The results showed that the angle of incidence of sunlight and the distance from the light source significantly affect the efficiency of the solar panel. Further studies could be conducted to investigate the efficiency of solar panels under various weather conditions.

Read more about lab reports here:

https://brainly.com/question/20003985

#SPJ1

The dodo's extinction was a change that the ecosystem of Mauritius was not able to recover from.

One example of a change that an ecosystem was not able to recover from is the extinction of dodo bird in Mauritius.

The dodo bird was a flightless bird that was native to Mauritius, an island in Indian Ocean. When humans arrived on the island in 16th century, they brought with them non-native animals such as pigs, rats, and monkeys, which preyed on dodo's eggs and competed with bird for food.

The dodo had no natural predators on the island and was not adapted to defend itself against the new threats posed by these introduced species. As a result, dodo population declined rapidly and was completely extinct by the end of 17th century.

To know more about ecosystem, refer

https://brainly.com/question/842527

#SPJ1

There will be 0.5 moles of NaCl and 0.25 moles of CO2 produced if the entire 0.25 mol of Na2CO3 interacts with the excess HCl.

Na2CO3 + HCl 2NaCl + H2O CO2

1 mol of Na2CO3 splits into 2 moles of NaCl and 1 mole of CO2.

0.25 moles of Na2CO3 and 0.25 moles of CO2 are formed.

NaBr particles, 6.02 x 1022

Ca(OH)2 = CaBr2 + 2NaOH 2NaBr + Ca(OH)2

NaBr, 2 mole creates two moles of NaOH

Hence, 6.02 x 1022 NaBr particles are converted into 6.02 x 1022 NaOH particles.

204.45 g is the mass of NH3.

(NH4)2SO4 = 2NH3 + H2SO4

34 g of NH3 converts to 132.14 g of (NH4)2SO4.

794.45 g of (NH4)2SO4 are created from 204.45 g of NH3.

1. mol C5H9O

20CO2 plus 18H2O from 4C5H9O and 27O2

20 moles of CO2 are produced by 4 moles of the compound C5H9O.

In the synthesis of one mole of C5H9O, five moles of CO2 are produced.

For more information on moles kindly visit to

https://brainly.com/question/26416088

#SPJ9

Answer: they would decrease the speed and collisions of the gas particles

Explanation:

This is because the particles slow down as the temperature decreases and would also effect the volume of the ballon making it deflate a bit as not as much volume is needed anymore.

The crude death rate in Rome in 2013 was 0.9269, or 0.9269 deaths per 1,000 people.

The crude death rate (CDR) is the number of deaths in a population divided by the total population, multiplied by a constant factor (usually 1,000 or 100,000) to express the rate per unit of population.

The formula for CDR is:

CDR = (Number of deaths / Total population) x Constant factor

We are given the following values:

Number of deaths (D) = 2.41 x 10^4

Total population (P) = 2.6 x 10^6

Constant factor = 1,000

Substituting these values into the formula for CDR, we get:

CDR = (D / P) x Constant factor

CDR = (2.41 x 10^4 / 2.6 x 10^6) x 1000

CDR = 9.269 x 10^-1

Learn more about crude death rate here: https://brainly.com/question/29514292

#SPJ1

Therefore, if all of the molecular chlorine in the reaction is consumed to form hydrogen chloride, 25.69 grams of hydrogen chloride are produced.

A reaction is a process in which one or more substances (the reactants) are transformed into one or more different substances (the products). Chemical reactions involve the breaking and forming of chemical bonds, resulting in the rearrangement of atoms and the formation of new compounds. Reactions can be classified as physical or chemical, depending on whether or not a chemical change occurs.

Here,

The balanced chemical equation for the reaction between molecular chlorine (Cl₂) and hydrogen gas (H₂) to form hydrogen chloride (HCl) is:

Cl₂ + H₂ → 2HCl

This equation tells us that one mole of Cl₂ reacts with one mole of H₂ to produce two moles of HCl.

To determine the amount of HCl produced from 25 grams of Cl₂, we need to convert the mass of Cl₂ to moles using its molar mass:

molar mass of Cl₂ = 2 x atomic mass of Cl = 2 x 35.45 g/mol = 70.90 g/mol

moles of Cl₂ = (mass of Cl₂) / (molar mass of Cl₂) = 25 g / 70.90 g/mol = 0.352 mol

Since the mole ratio of Cl₂ to HCl is 1:2, the number of moles of HCl produced is twice the number of moles of Cl2:

moles of HCl = 2 x moles of Cl₂ = 2 x 0.352 mol = 0.704 mol

Finally, we can convert the moles of HCl to grams using its molar mass:

molar mass of HCl = atomic mass of H + atomic mass of Cl = 1.01 g/mol + 35.45 g/mol = 36.46 g/mol

Finally, we can use the molar mass of HCl to convert the number of moles to grams:

0.704 mol HCl x 36.46 g/mol = 25.69 g HCl

To know more about reaction,

https://brainly.com/question/30564957

#SPJ9

A potent analytical method used to ascertain the structure, make-up, and dynamics of molecules is nuclear magnetic resonance (NMR).

In NMR spectroscopy, the magnetic characteristics of molecule nuclei are measured in order to ascertain the structure of the molecule. The chemical shifts and coupling constants of the two isomers of stilbene, e-stilbene and z-stilbene, can be distinguished using NMR spectroscopy. The coupling constants are interactions between the spins of various nuclei, and the chemical shift is the shift in a nucleus' resonance frequency from a common reference frequency. The structure and relative concentrations of e- and z-stilbene in a sample can be determined using NMR spectroscopy.

learn more about isomers Refer:brainly.com/question/12796779

#SPJ1

The correct option is D:atoms with high electronegativities will not lose electrons, so instead they share electrons to reach a stable number of valence electrons

What do we mean by covalent bond-

A covalent bond is a chemical bond in which two atoms share electrons in such a way that they both attain a noble-gas configuration.

The sharing of valence electrons between atoms is known as a covalent bond.Some atoms lacks or has an extra electron in its outermost state,gaining or losing an electron from their outermost state can lead to stable configuration of both the species reducing their energy levels.Covalent bond is formed between an electronegative species(reciever) and electropositive species(donor),in which the electron is shared.

Learn more about covalent bond : https://brainly.com/question/3447218

#SPJ11

The inscribed polygon method for predicting aromaticity involves placing a polygon with one of its flat sides down and drawing a circle that touches all the vertices.

Molecular orbitals (MOS) below the center of the circle are bonding orbitals, and MOS above the center are antibonding orbitals. At each vertex where the polygon touches the circle, a line is drawn corresponding to a molecular orbital. Aromatic systems have all bonding MOS and homos (highest occupied molecular orbitals) completely filled with no unpaired electrons. This is done by placing one electron in each bonding orbital, then pairing up.

Learn more about Molecular orbitals: https://brainly.com/question/29750386

#SPJ11

The following are the correct options that describe the inscribed polygon method for predicting aromaticity:

The inscribed polygon method is a popular approach for predicting the aromaticity of a compound. The polygon's vertices represent the atoms of the compound, and the bond orbitals are represented by the lines. It is a cyclic arrangement of atoms with alternating single and double bonds that are more stable than their nonaromatic counterparts due to electronic delocalization. Aromaticity is a significant concept in organic chemistry because of its importance in the properties and reactivity of many organic molecules.

Learn more about aromaticity here: https://brainly.com/question/29497803

#SPJ11

Increasing flexibility: CF4 < SO3 < CO2 < PH3 < H2O < HCN < CO

Increasing strength: CF4 < CO2 < SO3 < PH3 < H2O < HCN < CO

Explanation: