a 0.11-kg tin can is resting on top of a 1.7-m high fence post. a 0.0020-kg bullet is fired horizontally at the can. it strikes the can with a speed of 900.0 m/s, passes through it, and emerges with a speed of 720 m/s. when the can hits the ground, how far is it from the fencepost? disregard friction while the can is in contact with the post.

Answers

Answer 1

It is 1.93 metres away from the post.

for vertical motion

[tex]S= u t + \frac{1}{2} g t^{2}[/tex]

S = 0 +  [tex]\frac{1}{2} g t^{2}[/tex]

1.7 = [tex]\frac{1}{2} 9.8 t^{2}[/tex]

t = 0.589 sec

using law of  conservation of momentum, on the horizontal motion

[tex]m_{bullet} \ v_{bullet i} = m_{bullet} \ v_{bullet f} + m_{tin} \ v_{tin}[/tex]

[tex]0.0020 = 0.0020 \ 3 \ 720 + 0.11 \ v_{tin}[/tex]

[tex]v_{tin}[/tex] = 3.273 m/s

S = [tex]v_{tin} \ t[/tex]

   = 3.273 m/s * 0.589 s

   = 1.93 m

To know more about momentum

brainly.com/question/29113044

#SPJ4


Related Questions

What is the equivalent resistance of a number of identical resistances (n), each of resistance (R), when
connected in series?
1)nR
2)R/n
3)n/R
4)n*2R

Answers

Answer:

Explanation: It's R/n

b On the Moon, the lunar module has a weight of 24 800 N
Calculate the Moon's gravitational field strength.
Give your answer correct to two significant figures.
N/kg

Answers

As we do not have the mass we can not give you the gravitational field strength, but you can find it out by measuring the mass of the lunar module and use the formula above.

What is the gravitational field?

Generally, To calculate the gravitational field strength on the Moon, we need to divide the weight of the lunar module (in newtons) by its mass (in kilograms).

We do not have the mass of the lunar module, however we know that the weight is equal to the force of gravity acting on it. The weight is force, which is measured in newtons.

Weight = Mass * gravitational field strength (g)

g = Weight / Mass

Read more about the gravitational field

https://brainly.com/question/12324569

#SPJ1

CQ not found

a thermometer is taken from a room where the temperature is to the outdoors, where the temperature is . after one minute the thermometer reads . (a) what will the reading on the thermometer be after more minutes?

Answers

The reading on the thermometer after more minutes will depend on the rate at which the temperature of the room and the outdoors change.

What is thermometer?

A thermometer is a device used for measuring temperature. It consists of a hollow tube made of glass that is filled with a liquid, such as mercury or alcohol, and a scale. When the temperature changes, the liquid expands or contracts, causing the scale to indicate the temperature.

If the temperature of the room and the outdoors remain relatively constant, then the reading on the thermometer after more minutes would likely be the same as the reading after one minute. However, if the temperature of the room or the outdoors changes faster than the other, then the reading on the thermometer after more minutes will be different from the reading after one minute.

To learn more about thermometer
https://brainly.com/question/29503787
#SPJ4

two equally charged particles are held 3.2x10-3 m apart and then released from rest. the initial acceleration of the first particle is observed to be 7.0 m/s2 and that of the second to be 9.0m/s2 . if the mass of the first particle is 6.3 x 10-7 kg, what are (a) the mass of the second particle and (b) the magnitude

Answers

The mass and magnitude of the second particle are calculated below.

The initial velocity of an object is its velocity prior to the effect of acceleration, which causes the change. The velocity will be the final velocity after accelerating the object for some time. When a particle moves at a constant speed, it can be accelerated. When a point object moves in a horizontal circular path at a constant speed, the direction of its velocity vector changes over time. It means that in a uniform circular motion, the object's velocity vector changes over time.

Distance between the charges, r = 3.2 × [tex]10^{-3}[/tex]m

initial acceleration of first particle, [tex]a_{1}[/tex] = 7m / [tex]s^{2}[/tex]

Initial acceleration of second particle, [tex]a_{2}[/tex] = 9.0m / [tex]s^{2}[/tex]

Mass of first particle, [tex]m_{1}[/tex] = 6.3 × [tex]10^{-7}[/tex]kg

Mas of second particle, m₂ = ?

a) Since, [tex]F_{1}=F_{2}[/tex]

∴ [tex]m_{1}a_{1} = m_{2}a_{2}[/tex]

mass of second particle-[tex]m_{2}[/tex] =[tex]\frac{m_{1}\times a_{1}}{a_{2}}[/tex]

= [tex]\frac{6.3\times10^{-7}\times7.0}{9.0}[/tex]

=4.9 × [tex]10^{-7}[/tex]Kg

b)As, [tex]F_{1} = F_{2}[/tex]

       = [tex]\frac{q_{1}q_{2}}{4\pi E_{0}r^{2}}[/tex] = [tex]m_{1}a_{1}[/tex]

       = 6.3 × [tex]10^{-7} \times[/tex] 7.0

       = 44.1 × [tex]10^{-7}[/tex]

∴ q = 7.1 × [tex]10^{-11}[/tex]C.

Learn more about mass:

brainly.com/question/15959704

#SPJ4

A 15. 0-cm-long solenoid with radius 0. 750 cm is closely wound with 600 turns of wire. The current in the windings is 8. 00 A. Compute the magnetic field at a point near the center of the solenoid

Answers

The windings' current is 8.00 A. A location close to the solenoid's center has a magnetic field of 0.0111 T.

The magnetic field at a point near the center of a solenoid can be calculated using the following formula:

B = (μ₀xnxI) / L

Where:

B is the magnetic field

μ₀ is the permeability of free space, which is 4π x 10^(-7) Tm/A

n is the number of turns per unit length of the solenoid, in turns/m

I is the current flowing through the solenoid, in A

L, length of solenoid

Given the radius of the solenoid as 0.75 cm = 0.0075 m, and the length of the solenoid as 15.0 cm = 0.15 m, the cross-sectional area of the solenoid is:

π*(0.0075 m)² = 1.767 x 10^-5 m²

The number of turns per unit length of the solenoid can be calculated by dividing the total number of turns by the length of the solenoid:

600 turns / 0.15 m = 4000 turns/m

We can now substitute these values into the formula:

B = (4π x 10^(-7) Tm/A) * (4000 turns/m) * (8.00 A) / (0.15 m)

B = 0.0111 T

Therefore, the magnetic field at a point near the center of the solenoid is 0.0111 T.

It is worth noting that this result is valid only when the solenoid is long enough so that its ends do not affect the magnetic field inside. Also, the solenoid is considered as tightly wound and the radius of the solenoid much smaller than the length, so that the magnetic field inside the solenoid is uniform.

To know more about magnetic field please refer: https://brainly.com/question/23096032

#SPJ4

In a 24 s interval, 228 hailstones strike a glass

window of area 0. 788 mº at an angle 20° to the

window surface. Each hailstone has a mass of

4g and speed of 8. 3 m/s.

If the collisions are elastic, find the average

force on the window.

Angwar in units of N.

Answers

The average force acting on a given area is 21.98 Pa.

What is force?

A force is an influence in physics that can change the motion of an object. A force can cause a mass object to change its velocity, or accelerate. Intuitively, force can be described as a push or a pull. A force is a vector quantity because it has both magnitude and direction.

Here,

Force = Mass X acceleration = 0.004kg x 9.8. This is when the hailstone is not inclined at an angle.

When the hailstone is inclined at an angle of 45, then the component of force along the glass window will be F =0.004kg x 9.8 x sin20= 0.005kg x 9.8 x 0.707= 0.0357N.

Therefore, total force for the 500 hailstones would be 500x0.0357N=17.85N

This force is acting on an area equal to 0.788m2

Pressure = Force per unit area = 17.32N/0.788m2 = 21.98Pa

The force is acting on an area known as average force is 21.98 Pa.

To know more about force,

https://brainly.com/question/29044739

#SPJ4

for serial weight measurements, what time of day would you instruct the person to have his or her weight measured?

Answers

Answer: approximately the same time of day

Explanation:

a bullet penetrates 7 cm into a piece of wood when fired at a speed of 33 m/s. find the time required for the bullet to stop.

Answers

When fired at 33 m/s, a bullet pierce a wood block by 7 cm. Find the rate of deceleration and the stopping time.

How is the target penetrated by a bullet?

EXPLANATION: Due to its great velocity, a bullet discharged from a gun has a very high kinetic energy. The bullet's kinetic energy affects the object it impacts or strikes. The enormous kinetic energy the bullet possesses as a result of its speed causes it to pierce its target.

Does a gunshot go through the body?

In addition to piercing tissue, bullets that enter a human body also break a bone and dislocate limbs. In addition to piercing tissue, bullets that enter a human body also break a bone and dislocate limbs. A colostomy life-long bag is possible in the event of an intestinal damage.

To know more about  pierce visit:

https://brainly.com/question/11391629

#SPJ4

when an object reaches terminal velocity its acceleration is

Answers

When an object reaches terminal velocity its acceleration becomes zero.

Terminal velocity is also called constant velocity. When there is no acceleration in the moving object. We can take the example of sedimentation.

Sedimentation is the process of settling down the soil particles at the bottom of the water. When soil particles comes down in water there are three forces which act on the particles. Downward force is weight of the particle. Upward force buoyant force of the water, and drag force. When upward forces become equal to the downward force then particles begins to settle down with a constant velocity. which is called terminal velocity.  

To know more about acceleration, here

https://brainly.com/question/12550364

#SPJ4

The particles leave a trail behind them as they move. The longer the trail, the faster that the particle is moving. During any up-and-down cycle of the particle, describe the speed. At what point during its motion does it move with the greatest speed AND smallest speed?

Answers

The particles leave a trail behind them as they move. The longer the trail, the faster that the particle is moving. During any up-and-down cycle of the particle, describe the speed. It moves with the greatest speed AND smallest speed when there is a change in the direction.

What speed?

The speed of an object is described as the magnitude of the change of its position over time or the magnitude of the change of its position per unit of time;

Speed is  a scalar quantity.

The particle will move faster when there is a change in the direction on the movement of the particle.

Learn more about speed at: https://brainly.com/question/26046491

#SPJ1

Which sentence best explains the relationship between cells, tissues. And organs in the human body

Answers

Organ function is related to cell size which determines the function of tissues explains the relationship between cells, tissues and organs in the human body

Define a cell.

The smallest structural and operational unit of an organism is a cell. Although it is often tiny, macroscopic cells can also exist. Your body's basic building blocks are these cells, which are present in many different forms.

A tissue is made up of a collection of comparable cells and the connective tissue that binds them together to serve a common purpose. An organ is a collection of tissues found in an organism that cooperate to carry out a specific task. The lungs, kidneys, and stomach are a few examples. The bronchi, bronchioles, and alveoli all work together to assist the lungs exchange oxygen and carbon dioxide from the blood.

To learn more about cells use link below:

https://brainly.com/question/13920046

#SPJ1

A soccer player kicks a ball moving in a straight line
towards the field goal, causing it to accelerate into the field
goal.
O Negative work is done on the ball.
Positive work is done on the ball.
O No work was done on the ball.
O Negative work was done on the field.

Answers

When the force applied on the ball causes it o accelerate into the field

goal, Positive work is done on the ball.

option B.

What is work done?

A work is said to be done when an applied force causes a displacement of an object.

Mathematically, the formula for work done is given as;

W = Fd

where;

F is the applied forced is the displacement of the object

Thus, when  a soccer player kicks a ball moving in a straight line

towards the field goal, causing it to accelerate into the field goal, the work done on the ball is a Positive work.

Learn more about positive work here: https://brainly.com/question/28104809

#SPJ1

An ice-making machine inside a refrigerator operates in a Carnot cycle. It takes heat from liquid water at 0. 0 degrees Celsius and rejects heat to a room at a temperature of 19. 2 degrees Celsius. Suppose that liquid water with a mass of 76. 3kg at 0. 0 degrees Celsius is converted to ice at the same temperature. Take the heat of fusion for water to be L_f = 3. 34*10^5 J/kg.


How much energy E must be supplied to the device?


Express your answer in joules

Answers

The energy E must be supplied to the device is 1.8x10^3kJ when an ice-making machine inside a refrigerator operates in a Carnot cycle.

Given the temperature initially (Tl) = 0degrees Celsius = 273K

The final temperature (Tc) = 19.2degrees Celsius = 273 + 19.2 = 292.2K

Mass of liquid water (m) = 76.3kg

The water is converted to ice at 0 degrees Celsius

The heat of fusion for water to be Lf = 3.34*10^5 J/kg.

Let heat released from ice = Qc

Heat absorbed by water = Ql

We know that Ql = mLf = 76.3 x 3.34*10^5 = 2.54*10^4kJ

Then Qc/Ql = -Tc/Tl

Qc = - 254.842*10^5 (292.2/273)

Qc = -2.72x10^4kJ

The heat being lost to the hot reservoir is the cause of the negative sign.

We know that Ql = Qc + W where W is the work done

W = Qc - Ql = 2.54*10^4kJ - 2.72x10^4kJ

W = 1.8x10^3kJ

Hence the energy E that must be supplied to the device is 1.8x10^3kJ

To learn more about work click here https://brainly.com/question/18094932

#SPJ4

at what speed do a bicycle and its rider, with a combined mass of 120 kg , have the same momentum as a 1200 kg car traveling at 5.0 m/s ? express your answer to two significant figures and include the appropriate units.

Answers

The speed of a bicycle and its rider with a combined mass of 120 Kg is 50m/s.

It is given that a car of mass 1200 kg is traveling at a speed of 5.0 m/s.

                           momemtum of the car = mass × speed

                                                                 = 1200 × 5

                                                                 = 6000 kg m/s

It is given that the bicycle and its rider will also be having the momentum same as the car. Therefore, the momentum of the bicycle = 6000 kg m/s.

       Mass of the bicycle = 120 kg.

                                 momentum of the bicycle = mass × speed

                                                  [tex]speed = \frac{6000}{120} \\\\ speed = 50 m/s[/tex]    

Therefore, the speed of the bicycle and its rider = 50 m/s      

                                   

To know more about momentum, visit: https://brainly.com/question/924303

#SPJ4

A net force pushing a 15 kg wagon on a level road results in an acceleration of 2 m/s².
What is the net force?

Answers

Answer:

30N

Explanation:

As we know that ,

Force = mass * acceleration

so substitute the respective values,

F = 15kg * 2m/s²

F = 30N

and we are done!

if replacing the lights with a fluorescent bulb would save 60 w per night, what savings in kwh does this represent in one year?

Answers

The savings in kWh from replacing the lights with a fluorescent bulb in one year is 496.4 kWh/yr.

Evaluating :

Saving power = 60 w per night .

340 J/s ( 4h/d)(3600 sec/h) (365 d/yr)

( 1kWh/ 3.6 x 10 6 J)

= 496.4 kWh/yr

Which unit represents energy?

The capacity to perform work is a definition of energy. When energy is released, a body performs the same amount of work as it has energy stored. Scalar energy is a quantity. Joule is the SI unit for energy. 1 joule of energy is the amount of energy required to perform one joule of work.

What is the energy rule?

According to the law of conservation of energy, energy can only be changed from one form to another rather than being created or destroyed. Unless energy is added from the outside, a system always has the same amount of energy.

Learn more about energy:

brainly.com/question/2003548

#SPJ4

A hot-air balloon takes off from the ground traveling vertically with a constant upward acceleration of magni- tude g/4. After time interval ∆t, a crew member releases a ballast sandbag from the basket attached to the balloon. How many seconds does it take the sandbag to reach the ground?

Answers

The time it takes for the sandbag to reach the ground would depend on the height from which it was released. The value is calculated to be t = √(2 s/(3g/4)).

To find out how long it takes for the sandbag to reach the ground, we can use the equation of motion for a vertically falling object under the influence of gravity:

s = v₀ t + (1/2) g t²

where s is the distance fallen, v₀ is the initial velocity (which is 0 m/s for the sandbag), t is the time elapsed, and g is the acceleration due to gravity (approximately 9.8 m/s²).

We know that the sandbag is being released from the balloon and has an upward acceleration of g/4. So, the equation of motion becomes

s = v₀ t + (1/2)(g - g/4) t²

We also know that s is the distance fallen to the ground, which we can take as the final distance.

Now solving the equation for t, t = √(2 s/(g - g/4))

It is given that the magnitude of the upward acceleration is g/4, so (g - g/4) = 3g/4, so the final equation becomes t = √(2 s/(3g/4))

To know more about time:

https://brainly.com/question/30313443

#SPJ4

a pendulum has a period of 1.04 seconds on earth. what is its period on mars, where the acceleration of gravity is about 0.37 that on earth? give the answer in seconds, to 2 decimal places.

Answers

Period of the pendulum on Mars is 1.84 seconds (rounded to 2 decimal places).

What is period of a pendulum?

Period of any pendulum is the distance from the pivot to center of oscillation.

The period of a pendulum, T:

T = 2 * pi * sqrt(L/g);  L is length of pendulum and g is acceleration due to gravity.

On Earth, period of the pendulum is 1.04 seconds. To find the period on Mars, we can use fact that the acceleration due to gravity is 0.37 times that on Earth:

g_mars = 0.37 * g_earth

T_mars = 2 * pi * sqrt(L/g_mars)

Now we know ; T_mars = T_earth * sqrt(g_earth/g_mars)

T_mars = 1.04 * sqrt(1/0.37) = 1.04 * 1.76 = 1.8368 s

Therefore, the period of the pendulum on Mars is 1.84 seconds (rounded to 2 decimal places).

To know more about period of pendulum, refer

https://brainly.com/question/26524032

#SPJ4

Within 4. 0 s of liftoff, a spacecraft that is uniformly

accelerating straight upward from rest reaches an altitude

of 4. 50 X 102 m [up).

(a) What is the spacecraft's acceleration?

Answers

The spacecraft's acceleration can be found using the equation: a = (v-u)/t = 4.50 x 10^2 m / 4.0 s = 11.25 m/s^2.

Can you explain the concept of uniformly accelerating motion?

Uniformly accelerating motion refers to an object that is moving at a constant rate of acceleration. This means that the velocity of the object is changing at a constant rate, but the acceleration remains the same throughout the motion. An example of this type of motion is an object that is accelerating from rest at a constant rate. The motion of the object can be described mathematically by the equations of motion, such as distance = initial velocity * time + 1/2 * acceleration * time^2. The graph of uniformly accelerating motion is a parabola, with velocity on the y-axis and time on the x-axis. This type of motion is different from non-uniform acceleration, where the acceleration changes during the motion.

To know more about Acceleration visit: https://brainly.com/question/3046924

#SPJ4

A spacecraft that is uniformly accelerating straight upward from rest reaches an altitude of 4. 50 X 102 m [up) with acceleration of 11.25 m/s².

Evaluating :

The spacecraft's acceleration can be found using the equation:

                      a = (v-u)/t

             = 4.50 x 10² m / 4.0 s

                  = 11.25 m/s².

Uniformly accelerating motion :

Uniformly accelerating motion refers to an object that is moving at a constant rate of acceleration. This means that the velocity of the object is changing at a constant rate, but the acceleration remains the same throughout the motion. An example of this type of motion is an object that is accelerating from rest at a constant rate.

The motion of the object can be described mathematically by the equations of motion, such as distance = initial velocity × time + 1/2 * acceleration × time². The graph of uniformly accelerating motion is a parabola, with velocity on the y-axis and time on the x-axis. This type of motion is different from non-uniform acceleration, where the acceleration changes during the motion.

Learn more about Acceleration :

brainly.com/question/3046924

#SPJ4

Jack and Jill ran up the hill at 3.0 m/s . The horizontal component of Jill's velocity vector was 2.3 m/s .
what was the angle of the hill
What was the vertical of Jill's velocity

Answers

(a) The angle of the hill is 40⁰

(b) The vertical of Jill's velocity is 1.93 m/s.

What is the angle of the hill?

The angle of the hill is calculated by applying the following kinematic equation as shown below.

Vₓ = V cosθ

where;

V is the velocity of JilVₓ is the horizontal component velocityθ is the angle of the hill

cosθ = Vₓ / V

θ  = arc cos (Vₓ / V)

θ  = arc cos (2.3 / 3)

θ  = 40⁰

The vertical component of the velocity is calculated as follows;

Vy = 3 m/s  x  sin (40)

Vy = 1.93 m/s

Learn more about vertical component here: https://brainly.com/question/25854506

#SPJ1

If a battery produces a voltage of 53V and a resistance of 31 Ohms, calculate the current.

Answers

I don’t know for sure

HELPPPP ASPPP PLEASE THA K YOU

Answers

In the transverse wave, point D represents the trough of the wave.

option D.

What is the trough of a wave?

A wave two important points point, one curves upwards while the other curves downwards.

The maximum value of upward displacement within a cycle of a wave is known as crest. So the crest is a point on a surface wave where the displacement of the medium is at a maximum.

The maximum value of downward displacement within a cycle of a wave is known as trough.

Thus, from the graph, point A represents crest of the wave while point D represents trough of the wave.

Learn more about trough here: https://brainly.com/question/2116559

#SPJ1

How is the electrostatic force (Felect) related to the separation distance (d) the two charges? Keeping the magnitude of charge on both objects constant, conduct a systematic study to collect data relating separation distance to force. The separation distance is defined as the distance between the centers of the two objects; the best strategy involves centering the objects on a gridline and using distances that are a whole number of squares.


Make a claim describing the relationship between Felect and d. Support your claim with evidence (references to the data) and reasoning

Answers

Allow two positive charges. Cuban and American two were distantly separated B. Cubans also use force against one another. This is also cute. Thus, the force will be equal to Q1 + Q2 + R^2.

More on electrostatic force and two charges :

A characteristic of matter that affects how much force an object experiences when exposed to an electromagnetic field. A substance's charge might be positive, negative, or neutral. Total electric charge is conserved and cannot be created or destroyed, much as energy and matter.

Coulomb's constant, often known as the electric force constant, has a value of

K=   [tex]\begin{equation*} 9\times10^9 \end{equation*}[/tex]  [tex]\begin{equation*} \frac{Nm^2}{C^2} \end{equation*}[/tex]

Electrostatic force formula

[tex]\begin{equation*} \left|F_{E} \right|=K\left|\frac{q_1q_2}{r^2}\right| \end{equation*}[/tex]      

[tex]F_{E}[/tex] is a electric force [tex]q_{1}[/tex]  and [tex]q_{2}[/tex] is electric charge in coulomb K is constant,  r  is the distance between the charges  

The magnitude of the electric force between [tex]q_{1}[/tex] and [tex]q_{2}[/tex]

Directly proportional to the size of the charges and inversely proportional to the square of the distance between them is the formula q, start subscript, 2, end subscript. The name of this equation is Coulomb's Law.

Comparing electric force and gravitational force with Newton's law of gravitation:

[tex]\begin{equation*} \left|F_E\right|=K\left|\frac{q_1q_2}{r^2}\right| \end{equation*}[/tex]

[tex]\begin{equation*} \left|F_G\right|=K\left|\frac{q_1q_2}{r^2}\right| \end{equation*}[/tex]

Similar to how gravitational force grows in strength with mass, electric force grows in strength with the size of the charges. Along the fictitious line connecting the items, both forces operate. The inverse-square law states that both forces are inversely proportional to the square of the distance between the objects. Additionally, both forces have constants of proportionality.

The relative intensities of gravitational and electric forces, which are determined by the ratio of K to G, are a disparity between them. The gravitational force between an electron and a proton is much smaller than the electrostatic force between them by several orders of magnitude.

To know more about gravitational force :

https://brainly.com/question/24783651

#SPJ4

If the acceleration of an object is negative , the object must be slowing down .

Answers

Yes the given statement is true. Negative acceleration of an object shows that the object is slowing down.

The rate of change of velocity with respect to time is nothing but the acceleration. It is considered as a vector quantity that has both magnitude and direction. Its SI unit is m/s², and its dimension formula is [LT⁻²]. Mathematically

Acceleration, a = (v₂ - v₁)/Δt

Where v₂ is the final velocity after time Δt, and v₁ is the initial velocity. If the acceleration is negative it means final velocity is smaller than initial velocity. It means object is slowing down. Negative acceleration is also called deceleration. Hence the given statement is true.

--The given question is incomplete, the complete question is:

"Is it true that If the acceleration of an object is negative the object must be slowing down?"--

To know more about acceleration, here

https://brainly.com/question/12550364

#SPJ4

An elevator cab is pulled upward by a cable. The cab and its single occupant have a combined mass of 1450 kg. When that occupant drops a coin, the tension in the cable is 12. 0 kN. What is the acceleration of the coin relative to the cab

Answers

The cable will be under 12.0 KN of tension when that person drops a coin. Then the acceleration of the coin relative to the cab is 0.00828 m/s^2.

To find the acceleration of the coin relative to the cab, we can use the equation for tension force:

Tension force = mass x acceleration

We are given the tension force (12.0 kN) and the combined mass of the cab and its occupant (1450 kg). Therefore, we can solve for acceleration:

12.0 kN = (1450 kg) x acceleration

acceleration = 12.0 kN / (1450 kg)

acceleration = 0.00828 m/s^2

So the acceleration of the coin relative to the cab is 0.00828 m/s^2

It is worth noting that the coin will fall with respect to the elevator with an acceleration of 9.8 m/s^2 (upwards) but relative to the elevator, the coin is accelerating downwards with 9.8 m/s^2 + 0.00828 m/s^2 = 9.80828 m/s^2.

To know more about acceleration please refer: https://brainly.com/question/12550364

#SPJ4

is a=f/m = 10000/50000 does it equal 0.2 ms to the power of -2

Answers

Yes, a=f/m where a is the acceleration, f is the force, and m is the mass of an object,  a=0.2m/s^2

According to Newton's 2nd law of motion, According to this law, the rate of change of linear momentum of a body is directly proportional to the external force applied on the body, and this change takes place always in the direction of the force applied. In simple terms, it means that a larger force will change the momentum of an object more quickly as compared to a smaller force.

Mathematically, we can write

F∝ dp/dT

where p is the momentum

F∝ (mv-mu)/t₂-t₁

where v is the final velocity and u is the initial velocity

Now, F∝{m(v-u)}/(t₂-t₁)

         F∝ma                       [∵ a=(v-u)/t]

         F=kma

∴  when k=1

  F=ma

Now according to this question,

f=10,000 N    and     m=50,000kg

By applying the formula,

F=ma

10,000=50,000*a

∴ a= 10,000÷50,000

a=0.2  or 2×10⁻¹ m/s²

Read more about Newton's 2nd law:

https://brainly.in/question/48843211

a transverse wave travels along a rope describe how the particles of the Rope move relative to the direction of propagation of the wave ​

Answers

The wave itself, that is, the crests and troughs, will move along the direction of propagation, but the particles themselves will only move perpendicularly to it.

How does a transverse wave rope move?

A wave in which the displacement of the medium's particles is perpendicular to the direction of energy transfer is called a transverse wave. If a rope is stretched out horizontally and the end is vibrated back and forth vertically, a transverse wave can be produced in the rope.

Transverse wave propagation is only feasible via solids; it is not possible in liquids or gases. Only transverse waves can display the polarization phenomena. The plane of vibration or polarization is the location where all of the particle vibration in a medium occurs. Shaking the rope causes the rope's constituent parts to oscillate, which causes the wave to advance or retreat from the energy source. The rope moves at a straight angle—or perpendicular—to the direction that the wave moves.

To learn more about transverse waves use link below:

https://brainly.com/question/15531840

#SPJ1

in what region is the electric field strongest? in what region is the electric field strongest? along the x axis between x

Answers

The nearest point to a charged item or the position of a point charge has the greatest electric field. As the distance from the charge grows, the electric field's intensity diminishes.

A force field called an electric field is produced when one electric charge interacts with other charges in the field and either attracts or repels them. The volts per metre (V/m) unit of measurement for the electric field is the letter E. It may be seen as a charge producing lines of force. A positive test charge would be pushed towards the direction of the electric field at a specific spot if it were to be placed there. The strength of the electric field is highest when the lines are close together and weakest when they are far apart.

learn more about electric field  here:

https://brainly.com/question/8971780

#SPJ4

electrons are accelerated by a 1000-v potential drop. (a) calculate the de broglie wavelength. (b) calculate the wave- length of the x-rays that could be produced when these elec- trons strike a solid.

Answers

The de Broglie wavelength of the electron is 2.212 x 10-11 m.

What is Broglie wavelength?

The de Broglie wavelength is a concept in quantum mechanics which states that all matter has a wave-like nature, and can thus be described as a wave.

(a) The de Broglie wavelength (λ) of a particle is given by the equation: λ = h/p, where h is Planck's constant (6.626 x 10-34 J.s) and p is the momentum of the particle.
The momentum of an electron with a 1000-V potential drop is given by the equation p = eV/c,
where e is the electron charge (1.602 x 10-19 C) and c is the speed of light (2.998 x 108 m/s).
Therefore, the de Broglie wavelength of the electron is:
λ = h/(eV/c) = (6.626 x 10-34 J.s) / (1.602 x 10-19 C x 1000 V/2.998 x 108 m/s) = 2.212 x 10-11 m.

(b) X-rays are produced when high-energy electrons strike a solid.
The wavelength of the x-ray is inversely proportional to the energy of the electron.
The energy of the electron is equal to the potential drop, i.e. 1000 eV. Therefore,
the wavelength of the x-ray produced is: λ = hc/eV = (6.626 x 10-34 J.s x 2.998 x 108 m/s)/(1.602 x 10-19 C x 1000 eV) = 1.246 x 10-10 m.

To learn more about Broglie wavelength
https://brainly.com/question/15330461
#SPJ4

for each of the following items, indicate which viewing method is most appropriate–the unaided eye, light microscopy, scanning electron microscopy, or transmission electron microscopy–by dragging it into the correct bin.

Answers

For the investigation and analysis of micro- and nanoparticle imaging characterisation of solid objects, scanning electron microscopes (SEM) are among the most frequently used instrumentation.

What is the purpose of a scanning electron microscope? For the investigation and analysis of micro- and nanoparticle imaging characterisation of solid objects, scanning electron microscopes (SEM) are among the most frequently used instrumentation.The SEM's resolution of 10 nm, or 100, is one of the factors that make it popular for particle size analysis.Since many interior structures have membranes that are obscured by the light microscope, a transmission electron microscope would be the most effective tool for seeing the cell's internal architecture.Use both hands whenever you carry a microscope.With one hand, hold the arm firmly, and with the other, support it by placing it beneath the base.

To learn more about electron microscope refer

https://brainly.com/question/14149959

#SPJ4

Other Questions
indicate whether or not each of the structures is considered to be aromatic. compound a is a 3 carbon ring with a double bond between carbons 1 and 2. carbon 3 has a lone pair and a negative charge and is bonded to one hydrogen. compound b is a 5 carbon ring with two double bonds. the non alkene carbon has a carbocation. which is true? more young americans are dying, but not from vaccines.T/F Left ventricle: Pumps blood to all parts of the body expect the _________ Blood is _____ in oxygen and ______ in carbon dioxide.Finish the sentence A container holds a mixture of gases. Gas A has a partial pressure of 453. 9 mmHg. Gas B has a partial pressure of 287. 6 mmHg. Gas C has a partial pressure of 382. 4 mmHg. What is the total pressure of the gases inside the container? Which of the following is NOT settled on an actual cash value basis while covered under the business property coverage form?(Choose from the following options)1. Manuscripts2. Works of art or antiques3. Valuable papers and records4. Property of others when applying the process of science, which of these is tested?a) a questionb) a resultc) an observationd) a predictione) a hypothesis what the longest study on human happiness found is the key to a good life Perform an experimental study to compare the speed of our AVL tree, splay tree, and red-black tree implementations for various sequences of operations. (Python Programming) Read the following text from a student essay. How can the writer best improve his or her organization?In response to the rampant graffiti problem in our school, I am proposing one relatively straightforward solution. Each classroom should be assigned to one area of the school and given responsibility for its upkeep, from keeping it clear of litter to ensuring that the walls are unmarked. Students could earn points for each day that their assigned area is kept free of graffiti. These points would entitle students to special prizes or privileges at school. The amount of graffiti around the school lately is simply unacceptable. Property is being damaged, and the custodial staff spends far too much time cleaning up after delinquent students. If students take pride in our school and work together, we can keep it looking spotless and beautiful.1. by moving the second sentence to the beginning2. by adding a transition between the final two sentences3. by describing the problem before moving on to the solutionAlso, this question is from IXL R.7 Suggest appropriate revisions (7th grade) 1. the steel factory makes steel from iron ore and coal. both iron and coal mines are near city a, while the demand for steel is in city b, which is 100 kilometers away. the factory makes 1 ton of steel from 1 ton of coal and 2 tonnes of iron ore. shipping is costly and exhibits increasing returns to scale. shipping 1 ton of goods (either raw materials or final products) incurs a terminal cost of $100 (the fixed cost incurred as long as one needs to ship something, no matter how far it is shipped) and $10 per kilometer. a. is the production of steel weight-losing or weight-gaining? b. determine where the factory will be located in order to save as much as possible in shipping cost? suppose that if the factory is built in city a, it has immediate access to coal and iron ore, no shipping cost involving raw materials is required. if the factor is built in city b, it has immediate access to the market, no shipping cost involving the final product is required. c. now suppose that the coal mine near city a is depleted. now coal is shipped to city b, which is also a major port city, from overseas. suppose now if the factory is located in city b, it has imme- diate access to coal, no shipping cost is incurred. determine where the factory will be located in this new situation. A store sells oranges and apples. Oranges cost $1.00 each and apples cost $2.00 each. In the first sale of the day, 15 fruits were sold in total, and the price was $25. How many of each type of frust was sold? show it in a graphhhhhh!!! THANK YOU!!!! Which area should have the lowest temperatures? A. 1 B. 2 C. 3 D. 4 Reset Next Earth's Structures and Climate: Mastery Test 2019 Edmentum. All rights reserved Shelby recorded the heightsof three different trees in this table. Use mentalmath to find how much taller the redwood treeis than the sequoia tree.3DATATreeSequoiaTanbarkRedwoodTree HeightsHeight (ft)17375237 In preparing a monthly bank reconciliation, a business follows several steps. Place the selected steps below in the correct order of occurrence.1 Identify the bank statement balance then add any deposits in transit and subtract any outstanding checks.2 Compute the adjusted bank balance.3 Identify the company's book balance.4 Add any unrecorded credit memoranda from the bank, interest earned, and errors understating the book balance.5 Identify and list any unrecorded debit memoranda from the bank, service charges, and errors overstating the book balance.6 Compute the adjusted book balance and compare it to the adjusted bank balance to verify equality. Analyzing Structure and Theme in Romeo and Juliet: Act 2, Scenes 4-6: Mastery Test1re (excerpt)3he real-life King Richard ofquest for power as Richardurder to ascend to thethe Duke of Richmond hasrd in battle. Richmond'sresent in support ofbelieves him to be on hisnions, Ratliff and Norfolk,chmond and Lord Stanley.LIFF, Attendants andthumberland as touchingned up in arms.th: and what said SurreySelect the correct answer.Which theme is supported by the passage?All good things must come to an end.OB.Ambition can lead to cruel actions.OC.No one can be trusted in politics.OD. Nothing good comes from revenge.O A.ResetNext what does mond plan to do with helmholtz and marx? how does each man respond to their punishment is actually a reward The United States has a budget deficit of more than $15 trillion. A budget deficit occurs when a nationMultiple Choice receives excess taxes has no national debts balances toxes and expenditures spends more than it takes in from toxes reduces its expenditures Write a for loop to print all elements in courseGrades, following each element with a space (including the last). Print forwards, then backwards. End each loop with a newline. Ex: If courseGrades = {7, 9, 11, 10), print: 7 9 11 10 10 11 9 7 Hint: Use two for loops. Second loop starts with i courseGrades.length - 1. (Notes) Note: These activities may test code with different test values. This activity will perform two tests, both with a 4-element array. See How to Use zyBooks". Also note: If the submitted code tries to access an invalid array element, such as courseGrades[9] for a 4-element array, the test may generate strange results. Or the test may crash and report "Program end never reached, in which case the system doesn't print the test case that caused the reported message. 1 import java.util.Scanner; 2 3 public class CourseGrade Printer public static void main (String [] args) Scanner scnr = new Scanner (System.in); final int NUM_VALS 4 int courseGrades new int[NUM_VALS] int i 4 6 7 for (i 0; i < courseGrades.length; ++i) { courseGrades[il } 10 = Scnr.nextInt () 11 12 13 / Your solution goes here 14 15 16 } 17 A student wants to develop an explanation of the role cellular respiration and photosynthesis play in the cycling of matter. Answering which of the following questions would MOST help the student develop an explanation? What urpried Brendon about hi encounter with Chae? What ended their lunch together? (Retart Book)