2. Why was sud production used to assess the effectiveness of the synthesized soaps?

2. Why Was Sud Production Used To Assess The Effectiveness Of The Synthesized Soaps?

Answers

Answer 1

Answer:

Soap is effective as a cleaning agent because it is amphiphilic; it is partly polar and partly nonpolar. ... The sodium ion of the soap is replaced by one of these new ions, and the resulting salt is no longer soluble.

Answer 2

Soap seems to be amphiphilic, or partially polar as well as partially nonpolar, it works well as a cleaning agent. Several of these newfound ions take the place of such soap's sodium ion, rendering the salt insoluble.

What is Soap?

Long chain fatty acids are salts of sodium and potassium that have a cleaning effect in the water. referred as soap They should be used as cleaning agents to get rid of oil and filth from garments and skin. As an illustration, stearic, oleic, as well as palmitic acids are used to create sodium stearate, sodium oleate, respectively sodium palmitate.

What is cleaning agent?

Cleaning agents, often known as hard-surface cleansers, are things that are used to get rid of debris from surfaces, such as dust, stains, foul odors, and clutter. Health, aesthetics, odor removal, and stopping the transfer of dirt and toxins to oneself or others will be among the goals of cleaning products.

Because soap can serve as an emulsifying agent, it would be a superior cleanser. An emulsifier has the ability to mix two immiscible liquids together.

To know more about soap

https://brainly.com/question/19033481

#SPJ2


Related Questions

4. A student performs four trials of an investigation to determine the boiling point of water. How should the student handle the results?
A. The student should take the average of the minimum and maximum value of the results.
B. The student should use the value that is closest to 100ºC.
C. The student should use the maximum value of the results.
D. The student should take the average of the results from all four trials.

Answers

Answer:

i think its D

Explanation:

In order to get maximum accuracy, student should take average of results from all four trials.

What is accuracy?

Accuracy  in terms of chemistry can be defined as to how close a measurement is to the true value.There are three types of accuracy:

1) Point accuracy-It means accuracy is present at that point of scale only.It does not give any information about the accuracy of the instrument.

2)Percentage of true value--It is the accuracy  which is determined by identifying accuracy of the instrument  and comparing it with the measured true value.

3)Percentage of scale range- It is the accuracy  which determines accuracy of the measurement.

Accuracy in case of instruments  is neglected up  to ±0.5 percent.Accuracy of measurements can be increased by taking multiple measurements and taking into account human errors.

Learn more about accuracy,here:

https://brainly.com/question/15276983

#SPJ2

Ethanol (C₂H₆O) is combusted in air according to the following reaction: C₂H₆O(l) + O₂(g) → CO₂(g) + H₂O(l) How many moles of water would be produced by the complete combustion of 44.5 grams of ethanol in the presence of excess oxygen?

Answers

2.89 moles of water would be produced by the complete combustion of 44.5 grams of ethanol in the presence of excess oxygen.

According to this question, the following reaction between ethanol and oxygen is given:

C₂H₆O(l) + O₂(g) → CO₂(g) + H₂O(l)

However, this equation is not balanced. The balanced equation is as follows:

C₂H₆O + 3O₂ → 2CO₂ + 3H₂O

According to this equation, 1 mole of ethanol produces 3 moles of water.

We convert 44.5g of ethanol to moles by dividing by its molar mass as follows:

mole = 44.5g ÷ 46.07g/mol

mole = 0.966mol of ethanol

If 1 mole of ethanol produces 3 moles of water.0.966mol of ethanol will produce (0.966 × 3) = 2.89mol

Therefore, 2.89 moles of water would be produced by the complete combustion of 44.5 grams of ethanol in the presence of excess oxygen.

Learn more at: https://brainly.com/question/21085277?referrer=searchResults

What happens to iron in a bolt as the bolt rusts?
A. It undergoes a chemical change.
O B. It undergoes a physical change
O C. The mass of the atoms decrease
O D. It changes into a different element.
a

Answers

Answer:

it undergoes a chemical change

Help please With this :)))

Answers

Answer: 3

Explanation:

dentify the parts of the atom that are labeled in the diagram.

Answers

Answer:

Our current model of the atom can be broken down into three constituents parts – protons, neutron, and electrons. Each of these parts has an associated charge, with protons carrying a positive charge, electrons having a negative charge, and neutrons possessing no net charge.

HELPP
explain the difference between molecular and empirical formulas. Which types of compounds are described by the terms formula mass and molecular mass. Use an example to show the steps in calculating the formula mass for K2CO3

Answers

Answer:

In the previous section, we discussed the relationship between the bulk mass of a substance and the number of atoms or molecules it contains (moles). Given the chemical formula of the substance, we were able to determine the amount of the substance (moles) from its mass, and vice versa. But what if the chemical formula of a substance is unknown? In this section, we will explore how to apply these very same principles in order to derive the chemical formulas of unknown substances from experimental mass measurements.

Explanation:

tally. The results of these measurements permit the calculation of the compound’s percent composition, defined as the percentage by mass of each element in the compound. For example, consider a gaseous compound composed solely of carbon and hydrogen. The percent composition of this compound could be represented as follows:

\displaystyle \%\text{H}=\frac{\text{mass H}}{\text{mass compound}}\times 100\%%H=

mass compound

mass H

×100%

\displaystyle \%\text{C}=\frac{\text{mass C}}{\text{mass compound}}\times 100\%%C=

mass compound

mass C

×100%

If analysis of a 10.0-g sample of this gas showed it to contain 2.5 g H and 7.5 g C, the percent composition would be calculated to be 25% H and 75% C:

\displaystyle \%\text{H}=\frac{2.5\text{g H}}{10.0\text{g compound}}\times 100\%=25\%%H=

10.0g compound

2.5g H

×100%=25%

\displaystyle \%\text{C}=\frac{7.5\text{g C}}{10.0\text{g compound}}\times 100\%=75\%%C=

10.0g compound

7.5g C

×100%=75%

Which of the following solutions represents a good buffer system? a solution that is 0.10 mol L-1 NaOH and 0.10 mol L-1 KOH a solution that is 0.10 mol L-1 HCl and 0.10 mol L-1 NH4+ a solution that is 0.10 mol L-1 HF and 0.10 mol L-1 CH3COONa a solution that is 0.10 mol L-1 HCl and 0.10 mol L-1 KCl a solution that is 0.10 mol L-1 CH3COOH and 0.10 mol L-1 CH3COOLi

Answers

Answer:

chu papi

Explanation:

Calculate the mass of 5.3 moles of chloric acid (HClO3). Explain the process or show your work by including all values used to determine the answer.

Answers

Answer:

447.64 grams

Explanation:

To find the mass when given moles, it is a pretty simple process.

I start by finding the molar mass of chloric acid, which comes out to 84.46 grams/mol. To find the MM (molar mass), you just take the mass of each element in the molecule from the periodic table and add them all together.

After this, you set up the equation by taking the moles given and multiplying it by the molar mass. This gives you the new value in grams (since we cancelled out the moles). I have attached my work below.

I hope this helps! :^)

The mass of 5.3 moles chloric acid has been 447.85 g.

The mass of 1 mole of a compound has been equivalent to the molar mass of the compound. The molar mass of a compound has been the sum of the constituent atoms in a formula unit.

The molar mass (mwt) of chloric acid has been given as:

[tex]mwt=m_H\;+\;m_C_l\;+\;(m_O\;\times\;3)[/tex]

By substituting the values for the mass of constituent atoms, the molar mass has been given as:

[tex]mwt=1\;+\;35.5\;+\;16\;\times\;3\\mwt=36.5\;+\;48\\mwt=84.5[/tex]

The molar mass of chloric acid has been 84.5 g/mol.

The mass of 1 mole of chloric acid has been 84.5 g/mol. The mass of 5.3 moles chloric acid has been:

[tex]\rm 1\;mol=84.5\;g\\5.3\;mol=5.3\;\times\;84.5\;g\\5.3\;mol=447.85\;g[/tex]

The mass of 5.3 moles chloric acid has been 447.85 g.

For more information about molar mass, refer to the link:

https://brainly.com/question/12127540

PLEASE HELP
1. A closed bottle contains a mixture of Ar and O2 at 25.3°C. If the partial pressure of Ar in
the bottle is 0.447 atm and the total pressure of the bottle is 1.024 atm, what is the partial
pressure of O2 in the bottle?

Answers

Answer: 0.79 atm

Explanation:

The Ideal Gas Law is PV=nRT.

since both Ar and O2 have the same volume and temperature, the only variable causing the differnce in pressure betwwen the 2 gases is the number of moles

the total pressure = the partial pressure of Ar + the partial  pressure of O2

1.024 atm = 0.447 amt + ?

so  

? = 1.24 -0,447 = 1.24 - 0.45= 0.79 atm

the total pressure of the bottle is 1.024 atm, what is the partial

pressure of O2 in the bottle? is PV

What is inertia?(1 point)


A. a force that acts on an object at rest


B. the motion of an object


C. an object’s resistance to a change its motion


D. the speed and direction of an object in motion

Answers

Answer:

I think it's C. hope this helps:)

Very easy science 5th grade WILL MARK As brain list if owned by today

Answers

Answer:

A

Explanation:

According to the chart, A tv turns into heat, light, and sound energy.

What do we call the repeating units of a larger molecule?

Answers

Answer:

Brainlest

Explanation:

A polymer is a molecule made up of repeating units. These units, called “monomers”, form a long molecular chain. It might have branches, or it might just be one straight line of molecules, each connected in the same way. A monomer of polyethylene

agine that you are just outside the International Space Station (ISS) orbiting Earth, working in space. You brought your speaker with you so you could listen to some music while you work. You find the right song, and you hit play. What do you hear? Write your response below in complete sentences. 3) Include the answers to these questions in your response: • Would you hear your music? • Why or why not?

Answers

Answer:

There is no atmosphere outside the space station, so there is nothing to vibrate, therefor there is no sound.you better install your earphones in your space suit.

Explanation:

Imagine that you are just outside the International Space Station (ISS) orbiting Earth, working in space. You brought your speaker with you so you could listen to some music while you work. You find the right song, and you hit play. What do you hear? Write your response below in complete sentences.

Include the answers to these questions in your response: •

Would you hear your music? •

Why or why not?

You need matter that can vibrate and finally vibrate your ear drum in order to transmit sound waves. that you hear

There is no atmosphere outside the space station, so there is nothing to vibrate, therefor there is no sound.you better install your earphones in your space suit.

You will hear no music as there is no sound in the space because there are no molecules to vibrate.

Why no sound in the space?

Sound is generally considered a form of energy that consists of mechanical waves which travel in a medium. Sound is produced by a vibrating body which generates a disturbance in the medium and the medium helps to propagate the sound.

The medium of sound transmission is air where the molecules in the air are in the form of longitudinal waves. The vibrating body generates a disturbance in the rarefaction and compression of waves. The disturbance of the particles of the surrounding medium produces sound.

Sound always requires a medium to be traveled and reach its destination. As space does not have any medium for sound to generate disturbance. Space has a vacuum due to which sound cannot be heard in space.

Therefore, you will hear no music when you play a song in the space.

Learn more about sound, here:

https://brainly.com/question/14109969

#SPJ2

Which one of the following salts has the highest molar solubility in water?

Answers

Answer:

Correct option is

C

Ag

2

CO

3

; K

sp

=6.2×10

−12

(A) For CaCO

3

,S=

Ksp

=

8.7×10

−9

=9.3×10

−5

M

(B) For CuS,S=

Ksp

=

8.5×10

−45

=9.2×10

−23

M

(C) For Ag

2

CO

3

,S=(Ksp/4)

1/3

=(6.2×10

−12

/4)

1/3

=1.15×10

−4

M

(D) For Pb(IO

3

)

2

,S=(Ksp/4)

1/3

=(2.6×10

−13

/4)

1/3

=4×10

−5

M

Hence, Ag

2

CO

3

has the greatest molar solubility in pure water.

The table below provides data about a gas sample. Which of the following can be determined using the data?
Volume 2.0 L
Pressure 3.6 atm
Temperature 323 K
the chemical composition of the gas
the condensation temperature of the gas
the number of moles in the sample
the distance between gas molecules in the sample

Answers

Explanation:

Tabel di bawah ini memberikan data tentang sampel gas. Manakah dari berikut ini yang dapat ditentukan dengan menggunakan data? Volume 2,0 L Tekanan 3,6 atm Suhu 323 K komposisi kimia gas suhu kondensasi gas jumlah mol dalam sampel jarak antar molekul gas dalam sampel

Explanation:

....

해바라기해바라기해바라기해바라기

identify key concept/terminologies about solution or concentration of solution?

pls help me

thanks~​

Answers

Answer :

[tex] \: [/tex]

Concentration of Solutions

Recall that a solution consists of two components: solute (the dissolved material) and solvent (the liquid in which the solute is dissolved). The amount of solute in a given amount of solution or solvent is known as the concentration. The two most common ways of expressing concentration are molarity and molality.

Molarity

The molar concentration (M) of a solution is defined as the number of moles of solute (n) per liter of solution (i.e, the volume, V solution):

M = n / V solution

The units of molarity are mol/L, often abbreviated as M.

For example, the number of moles of NaCl in 0.123L of a 1.00M solution of NaCl can be calculated as follows:

[tex]0.123 \: l \: \: of \: solution \: \times \: \frac{1.00 \: mole}{1.00 \: l \: of \: solution \: } \: \\ = 0.123 \: moles[/tex]

Molality :

The molal concentration (m) of a solution is defined as the number of moles of solute (n) per kilogram of solvent (i.e., the mass of the solvent, msolvent):

[tex]m = \frac{n}{v \: solution} [/tex]

For example, the number of moles of NaCl dissolved in 0.123kg of H2O (the solvent), in order to make a 1.00m solution of NaCl, can be calculated as follows:

[tex]0.123 \: kg \: of \: solvent \: = \frac{1.00 \: mole}{1.00 \: kg \: of \: solvent \: } \\ = 0.123 \: moles[/tex]

(50 POINT) use this to answer: https://phet.colorado.edu/sims/html/acid-base-solutions/latest/acid-base-solutions_en.html

Describe how you could adjust the settings of the simulation to increase the number of red (H3O+) and blue (A-) particles in the solution of equilibrium. In three to four sentences, justify your answer and explain how and why this would change the pH of the solution.

Answers

The addition of more acid or base will increase the number of H3O+ and A- particles thereby decreasing and increasing the pH of the solution respectively.

What is an acid-base titration?

An acid-base titration is one in which an acid is added to a given volume of base in order to neutralize it.

When more of acid is added to a solution of a base than is required to neutralize it, the solution becomes acidic.

Similarly, when more base is use to neutralize an acid than is required, the solution becomes alkaline.

In the given simulation, (H3O+) is the acid while (A-) is the base.

By adding increasing the quantity of acid added, the number of H3O+ particles will increase. This will reduce the pH of the solution.

Also, the adding more base to the solution, the number of A- particles in the solution will increase. This will increase the pH of the solution.

Therefore, addition of more acid or base will increase the number of H3O+ and A- particles thereby decreasing and increasing the pH of the solution respectively.

Learn more about acid-base titration at: https://brainly.com/question/3508933

A chemical reaction occurs when _________.

A. Chemical Bonds are build
B. A new substance is created
C. Chemical Bonds are broken
D. All of the Above

Answers

Answer:

C. Chemical Bonds are broken

Explanation:

A chemical reaction occurs when chemical bonds are broken.

Chemical reactions occur when chemical bonds between atoms are formed or broken.

Hope this helps :)

Answer:

c: chemical bonds are broken

Explanation:

the broken bonds then create new bonds, rearranging the atoms into a new substance :)

4. The half-life of C-14 is 30 years. If a scientist had 100.0 g at the beginning, how
many grams would be left after 120 years has elapsed?
Half Lives
0
1
2
Time (years)
Amount (grams)
Show table

Answers

Answer:

6,25 gm

Explanation:

4. The half-life of C-14 is 30 years. If a scientist had 100.0 g at the beginning, how

many grams would be left after 120 years has elapsed?

10 years would be 120/30 = 4 half lives0

s0 the fraction of c-14 left would be four (1/2) multiplied together

1/2 X 1/2 X 1/2 X 1/2 = 1/16

SO 1/16 OF THE 100.0 gm would be left

100.0/16  = 6,25 gm

For the formula shown, how many sulfur atoms are represented?

Answers

Answer:

Your answer would be 6

Answer:

1 it is 1

Explanation:

Calculate the amount of energy That an obsect Can absorb from Yellow light Whose wave length is 589 nm.​

Answers

Explanation:

E = hf

c= f × lamda

f= c/ lamda

c= speed of light

f= frequency

lamda = wavelength

E = h c/ lamda

E = 6.626 × 10^-34 Js × 3 × 10^8 ms-1 / 589 × 10^-9 m

= 3.37 × 10^15 J

I will give brainlist

How much Ba(OH)2, in grams, is needed to make a 1.00m aqueous solution?

Answers

Answer:

We can say that we need 171 g barium hydroxide needed to make one model equals solution.

Explanation:

I hope this answered your question.

171 gram of  Ba(OH)2, in grams, is needed to make a 1.00 m aqueous solution.

What is mass?

Mass is the quantity of matter. The mass is calculated by the density divide by the volume.

In 1.00 solution, the mass of Ba(OH)2 is 171 gram.

Thus, the mass of Ba(OH)2 is 171 gram.

Learn more about mass

https://brainly.com/question/19694949

#SPJ2

True or false?

Increasing the temperature can help slow down chemical reactions by "burning away" unnecessary molecules

Answers

True because increasing the temperature it gets hotter

list several characteristics of ligroin​

Answers

- Petroleum fraction consisting mostly of [tex]C_{7}[/tex] and [tex]C_{8}[/tex] hydrocarbons

- The fraction is also called heavy naphtha

- Boiling in the range 90‒140 °C

- Ligroin is used as a laboratory solvent

- Ligroin it also esed as a motor fuel or as a solvent for fats and oils in dry cleaning

         [] All of these are different characteristics of ligroin​

         [] If you need more let me know  

Have a nice day!

     I hope this is what you are looking for, but if not - comment! I will edit and update my answer accordingly. (ノ^∇^)

- Heather

What is epoxy?
………………..

Answers

Answer:

Epoxy is the family of basic components or cured end products of epoxy resins.


Any of a class of adhesive plastics or other materials that are polymers of epoxides

PLEASE ANSWER ASAP!!!
The movement of tectonic plates in two different locations is shown below:

Two blocks labeled Location A and Location B are shown. The block labeled A has a vertical line in the middle. On the left of the line there is an arrow pointing down. On the right of the vertical line there is an arrow pointing up. At Location B the top layer of the block shows two horizontal arrows pointing towards each other. The portion of this block on the right is shown moving down.
Which statement is most likely true?

Subduction occurs in both locations.

The magnetic orientation of rocks may change in Location A and subduction occurs in Location B.

Subduction occurs in Location A and the magnetic orientation of rocks may change in Location B.

Answers

Answer: its a and b

Explanation:its very simple and the reason is bc yea

Answer:

B

Explanation:

The answer is B because it said subduction i guess. And I got it right! Hope this helps to anyone that is looking at this!

A 32.1 mole sample of gas has a temperature of 21 Celsius and a pressure of 2280.0 torr. What is the volume of the gas?

Answers

The volume of the gas is 27 ml

The calculation can be done as follows

The first step is to convert the pressure to atm

convert 2280 tors to atm

760 tors= 1 atm

= 2280/780

= 3 atm

The formula is

PV= nRT

The next step is to write out the parameters

Pressure= 3 atm

Temperature= 21 °C

no of moles= 32.1 mole

volume= ?

(r)constant= 8.314

3 × v= 32.1×8.314×21

3v= 81.080

V= 81.080/3

V= 27 ml

Hence the volume of the gas is 27 ml

Please see the link below for more information

https://brainly.com/question/15568262?referrer=searchResults

How much heat is required to increase the temperature of 150 g of water from
38°C -55°C?

Answers

Answer:

-55°C

Explanation:

Bwcause 38°C is gonna make it colder so thats why you should use that.

Hey :3 please help with this. Will mark brainlist if you’re right

Answers

Answer: 4

Explanation:

How are sound and light similar? How are they different?

Answers

They are
Both forms of energy that travels in waves

They are different because:
Sound is a mechanical wave
Light is a transverse wave
Light is way faster
Sound has to travel through a medium (substance) but light is electro magnetic (meaning it doesn’t need to travel through anything and it can travel a vacuum e.g light travel in space)

Answer:

Sound requires a medium to move through; light does not.

Sound and light are similar in that both are forms of energy that travel in waves.

Explanation:

Sound and light are similar in that both are forms of energy that travel in waves. They both have properties of wavelength, freqency and amplitude. Sound can only travel through a medium (substance) while light can travel through empty space. Sound is a form of mechanical energy caused by vibrations of matter.

Light waves DO NOT require a medium, they travel fastest in empty space; Sound waves REQUIRE a medium, they travel fastest in dense material like solids. Sound is a longitudinal wave.

Other Questions
Line 28 ("Spring ... wonder") most clearly marks a shift in the speaker's focus from the practical task at hand toAplanning ahead for future uses of the landBenjoying the beauty of the day instead of workingCreflection on his long friendship with the neighborDspeculation about the nature of fences and boundariesEuneasiness about the influence of supernatural forces Lila would like to take a ceramics class the class cost $120 she have saved $80 so far [tex]\sqrt{x}(-5-(-8))x^{2} +(-5-(-7))x^{2}[/tex] please help me with my art project An example of an organism that demonstrates asymmetry is a?? Would a light source be considered an internal or external stimulus? Decide if the following sentence is grammatically CORRECT or INCORRECT. Esa casa es pequea. Correct Incorrect. Part A From the following excerpt, which sentences best reflect Harding's desire to return to normalcy after the war? Why? "The world needs to be reminded that all human ills are not curable by legislation, and that quantity of statutory enactment and excess of government offer no substitute for quality of citizenship. America's present need is not heroics, but healing not nostrums, but norjalcy, not revolution, but restoration; not agitation, but adjustment not surgery but serenity, not the dramatic, but the dispassionate: not experiment, but equipoise; not submergence in internationality, but sustainment in triumphant nationality. My best judgment of America's needs is to steady down, to get squarely on our feet to make sure of the right path. Let's get out of the fevered delirium of war, with the hallucination that all the money in the world is to be made in the madness of war and the wildness of its aftermath. Let us stop to consider that tranquility at home is more precious than peace abroad, and that both our good fortune and our eminence are dependent on the normal forward stride of all the American people... B Font Sizes A ini Emilio and Dylan are studying the strengths and weaknesses of their construction business, Construction Concepts, as well as researching the opportunities and threats in the external environment. They are conducting a Multiple Choice SWOT analysis. synergy plan. contingency plan. forecast. QUICKLY!!!! A paper airplane was thrown from the top of a tall building.The height of the paper airplane above the ground can be found using the function `y=-1.5x+60` , where `x` is the time in seconds the airplane has been in the air.Jayden made this table to figure out how high the plane was at different times.0 | 6010 | 4520 | 3030 | 1540 | 0How would the equation `y=-1.5x+60` change if the height at 0 seconds was 75? PLS HELP CAUSE AND EFFECT , SOMETHING I CANT FIGURE OUT TREATY OF VERSAILLES AND THE LEAGUE OF NATIONS What I Can Do Task #5: Reading Beyond the Lines Now here is another activity that will ask you to critique further the stories and opinion pieces you previously read. This part of the module will require you to choose only one task to accomplish. Go over the instructions and select which task you will do. Option A: Answer the questions and justify your response by providing details based on the guides enclosed in parentheses. Follow the tabular format shown as you write your answers on a separate sheet of paper. The Two Brothers 1. Is the main character relatable to you? (Cite some qualities that make you similar or different.) 2. Is the setting effective or useful making you visualize the scenes? (Cite some lines that appeal to Your senses) 3. Is the plot interesting? (Cite aspects of it that make it good or dull.) 4. Is the conflict clear and realistic? (Indicate if it is something that people are likely to experience in life.) 5. Is the theme relevant to human experiences? (Instead of an explanation, write the theme you inferred from each story) 10 If f(x)=8-5x, what is f(4p+3) To what other expedition did the filmmakers compare Lewis and Cart? 8)What mass of hydrogen is needed to react with 32 g of copper oxide?CuO + H2 Cu + H2O Can somebody help me with this question? (Calculus) The elevation of city A is 72 feet above sea level; the elevation of city C is 24 feet above sea level. The elevation of city D is 1/4of the elevation of city C.Part A: Write an expression to represent the elevation, in feet, of city D. Part B: Simplify the expression and explain why the answer is negative or positive. What is a folk ballad?a poem with many wordsfour-line stanzas written in iambic pentameteran anonymous dramatic song passed through the oral traditionall of the abovenone of the above How many grams or H20 are produced if 25 grams of HCl are used? What's the different between "It was" and "That was"