The Venmo diagram compares protons with electrons. Which shared property belongs in the region marked B?
Which element is the most similar to calcium ca
Answer:
strontium
Explanation:
Answer:
Strontium
Explanation:
This is a earth metal, calcium is a reactive metal that forms a dark oxide nitride layer when exposed to air.
what are 4 ways a mineral can form
Answer:
The four main categories of mineral formation are: (1) igneous, or magmatic, in which minerals crystallize from a melt, (2) sedimentary, in which minerals are the result of sedimentation, a process whose raw materials are particles from other rocks that have undergone weathering or erosion, (3) metamorphic, in which new minerals form at the expense of earlier ones owing to the effects of changing—usually increasing—temperature or pressure or both on some existing rock type, and (4) hydrothermal, in which minerals are chemically precipitated from hot solutions within Earth.
The mineral can be formed from volcanic gases, oxidation, crystallization from magma, sediment formation, or deposition from a saline fluid.
What is a mineral?A rock can be described as a collection of minerals. A rock that becomes so hot it melts and many minerals come out in liquids that are hot enough to melt rocks.
Magma can be defined as a melted rock inside Earth, a molten mixture of substances that can be hot to more than 1,000°C. When the magma cools slowly inside the earth, which provides mineral crystals time to grow large enough.
Granite is a rock that produces from slowly cooled magma, consisting of the minerals quartz, plagioclase feldspar which is shiny white, pink potassium feldspar, and black biotite.
When magma will erupt onto the surface of the Earth, it is known as lava. Lava cools more rapidly than magma when it is below the surface and mineral crystals do not have time to form. But the chemical composition remains the same as if the magma cooled slowly.
The mineral can be formed through hydrothermal processes, weathering, and metamorphic and igneous environments.
Learn more about minerals, here:
https://brainly.com/question/1333886
#SPJ2
Please help. Will give brainliest.
Answer:
B.
Explanation:
i think its B
In an aqueous solution, a 0.100 M solution of glucose is prepared with a total volume of 0.150 Liters. If the molar mass of glucose is 180.16 g/mol how many grams must the solution contain?
Answer:
2.70 g of glucose.
Explanation:
The following data were obtained from the question:
Molarity of the glucose solution = 0.1 M
Volume of solution = 0.15 L
Molar mass of glucose = 180.16 g/mol
Mass of glucose =.?
Next, we shall determine the number of mole of glucose in the solution. This can be obtained as follow:
Molarity of the glucose solution = 0.1 M
Volume of solution = 0.15 L
Mole glucose =?
Molarity = mole /Volume
0.1 = Mole of glucose /0.15
Cross multiply
Mole of glucose = 0.1 × 0.15
Mole of glucose = 0.015 mole
Finally, we shall determine the mass of glucose in the solution as follow:
Mole of glucose = 0.015 mole
Molar mass of glucose = 180.16 g/mol
Mass of glucose =.?
Mole = mass /molar mass
0.015 = mass of glucose /180.16
Cross multiply
Mass of glucose = 0.015 × 180.16
Mass of glucose = 2.70 g
Therefore, the solution contains 2.70 g of glucose.
The grams that the solution must contain is :
- 2.70 g of glucose.
Mole ConceptGiven:
Molarity of the glucose solution = 0.1 M
Volume of solution = 0.15 L
Molar mass of glucose = 180.16 g/mole
Molarity of the glucose solution = 0.1 M
Volume of solution = 0.15 L
Molarity = mole /Volume
0.1 = Mole of glucose /0.15
Mole of glucose = 0.1 × 0.15
Mole of glucose = 0.015 mole
Mole of glucose = 0.015 mole
Molar mass of glucose = 180.16 g/mol
Mass of glucose =.?
Mole = mass /molar mass
0.015 = mass of glucose /180.16
Mass of glucose = 0.015 × 180.16
Mass of glucose = 2.70 g
The solution contains 2.70 g of glucose.
Learn more about "Mole":
https://brainly.com/question/1269011?referrer=searchResults
8. Which object has molecules that are moving? water in a cup that is not moving, or water in the ocean
PLEASE HELP ASAP!!!
Answer:
Water in the ocean
Explanation:
The water in the ocean is always moving so all the molecules are was well
Please help I beg you
Answer:
is highly respect is correct I promise!
what do y'all girls find attractive on a guy?
Answer:
alot of things
Explanation:
Calculate the mass percentage of NaClNaCl in a solution containing 1.50 gg of NaClNaCl in 50.0 gg of water.
Answer:
%m/m = 2.9 %
Explanation:
The mass percentage (m/m %) of a solution is calculated as follows:
m/m % = mass of solute/ mass of solution x 100
The solution is composed by : solute + solvent. In this case, the solute is NaCl and the solvent is water. We have:
mass of solute = 1.50 g
mass of solvent = 50.0 g
mass of solution = mass of solute + mass of solvent = 1.50 g = 50.0 g = 51.5 g
Thus, the mass percentage of NaCl in the solution is :
% m/m = (1.50 g)/(51.5 g) x 100 = 2.91 % ≅ 2.9 %
limnetic, profundel, littoral, and benefitic have what in common
Mineral reaction to stress
Answer:
Tenacity describes the reaction of a mineral to stress such as crushing, bending, breaking, or tearing. ... The majority of all minerals are brittle. An example is Quartz. (Minerals that are not brittle may be referred to as Nonbrittle minerals.)
How does the number of atoms or molecules in a system affect its thermal energy?
A. A system with fewer atoms and molecules has more thermal energy.
B. A system with more atoms and molecules has more thermal energy.
C. The number of atoms or molecules does not affect the thermal energy of a system.
D. Thermal energy increases as the atoms and molecules in a system move more.
Answer:
D. Thermal energy increases as the atoms and molecules in a system move more.
Explanation:
Thermal energy is a form of kinetic energy possessed by molecules of a system. The measure of this kinetic energy in an atom is called heat.
The average kinetic energy of a system is the temperature.
According to the kinetic theory, the more the particles move, the more their thermal energy. Thermal energy is often predicated on the velocity of the particles of the medium.very
Which of the
following mineral
characteristics are
associated with
gold?
A. it is a compound
B. it is made of many elements
C. it is man made
D. it is a solid
Answer:
D,B
Explanation:
there are 79 elements in gold
Suppose that you are a scientist who studies climate changes. While examining the rings of tree trunks, you notice several very large tree rings. What can you conclude about the climate during those years?
Answer:
The climate was wet and cold
Explanation:
Answer:
The large tree rings allow you to conclude that the climate was either very warm or wet during those growing seasons, because greater than normal growth occurred.
Explanation: It is the edge sample response
the earth is 24,901 miles. how many hours would it take to travel around the earth if traveling 100 meters per second?
Answer:
24,901 x 1609.34 = 40074275
40074275/100 equals
400742.75 s
divided by 3600
111.31
Explanation:
Calculate the number of C atoms in 0.716 mole of C?
Answer:
The answer is 4.31 × 10²³ C atoms
Explanation:
The number of C atoms can be found by using the formula
N = n × Lwhere n is the number of moles
N is the number of entities
L is the Avogadro's constant which is
6.02 × 10²³ entities
From the question we have
N = 0.716 × 6.02 × 10²³
We have the final answer as
4.31 × 10²³ C atomsHope this helps you
A binding protein binds to a ligand L with a Kd of 400 nM. What is the concentration of ligand when Y is (a) 0.25, (b) 0.6, (c) 0.95?
Answers: (a) 133.33nm (b) 600nm (c) 7,600nm
Answers above are correct. Please show all steps, really trying to understand.
Answer:
(a) 133.33nm
(b) 600nm
(c) 7,600nm
Explanation:
The concentration of Y can be determined by using the formula:
[tex]Y = \dfrac{[L]}{k_d+[L]}[/tex]
where;
[L] = concentration of the binding ligand.
kd = 400 nm
Thus:
When Y = 0.25; we get :
[tex]0.25 = \dfrac{[L]}{400+[L]}[/tex]
0.25 (400 + [L]) = [L]
100 + 0.25[L] = [L]
100 = [L] - 0.25 [L]
100 = 0.75 [L]
[L] = 100/0.75
[L] = 133.33 nm
At, Y = 0.6
[tex]0.6 = \dfrac{[L]}{400+[L]}[/tex]
0.6 (400 + [L]) = [L]
240 + 0.6[L] = [L]
240 = [L] - 0.6 [L]
240 = 0.4 [L]
[L] = 240/0.4
[L] = 600 nm
At, Y = 0.95
[tex]0.95 = \dfrac{[L]}{400+[L]}[/tex]
0.95 (400 + [L]) = [L]
380 + 0.95[L] = [L]
380 = [L] - 0.95 [L]
380 = 0.05 [L]
[L] = 380/0.05
[L] = 7600 nm
How many mL (to the nearest mL) of 0.140-M KF solution should be added to 400. mL of 0.212-M HF to prepare a pH
Answer:
205mL of 0.140M KF solution
Explanation:
pH = 2.70 solution.
It is possible to obtain the pH of the buffer of HF-KF using the H-H equation:
pH = pKa + log [KF] / [HF]
Where pH is desire pH = 2.70
pKa is pKa of HF = 3.17
[KF] could be taken as moles of KF
And [HF] moles of HF: 400.0mL = 0.4L * (0.212mol/L) = 0.0848 moles of HF
Replacing:
2.70 = 3.17 + log [KF] / [0.0848 moles HF]
-0.47 = log [KF] / [0.0848 moles HF]
0.3388 = [KF] / [0.0848 moles HF]
[KF] = 0.02873 moles of KF must be added.
In mL using concentration of KF (0.140M):
0.02873 moles KF * (1L / 0.140 mol) = 0.205L =
205mL of 0.140M KF solutionA geologist studies rocks. Which of Earth's spheres would a geologist be most interested in?
Answer:
Lithosphere
Explanation:
Answer:
ether the crust or lithosphere
Explanation:
Europium orbital diagram
which of the following is an example of
a physical property?
Answer:
physical property is property that you can touch, smell as it is bumpy it smells like eggs.
Explanation:
YW
Answer:
Physical properties include: appearance, texture, color, odor, melting point, boiling point, density, solubility, polarity, and many others.
Explanation:
What are the oxidation numbers of the atoms in this reaction?
Check all that apply.
Mg(s) + 2HCl(aq) → MgCl2(aq) + H2(g)
0 for Mg in Mg and MgCl2
0 for Mg(s) and H in H2
+1 for H in HCl
-1 for Cl in HCl
+2 for Mg in MgCl2
Answer:
2-5
Explanation:
I just did it.
The oxidation numbers of the atoms in this reaction are 0 for Mg(s) and H in H₂, -1 for Cl in HCl, +1 for H in HCl and +2 for Mg in MgCl₂
What is oxidation number?An oxidation number is a number assigned to atoms in molecules to show the general distribution of the electrons.
Oxidation state or number helps us describe the transfer of electrons.
The oxidation number/state is also used to determine the changes that occur in redox reactions.
Overall, the oxidation number of an atom in a molecule is the charge that the atom would have if all polar covalent and ionic bonds resulted in a complete transfer of electrons from the less electronegative atom to the more electronegative one.
Therefore, The oxidation numbers of the atoms in this reaction are 0 for Mg(s) and H in H₂, -1 for Cl in HCl, +1 for H in HCl and +2 for Mg in MgCl₂
Learn more about Oxidation number, here:
https://brainly.com/question/29263066
#SPJ2
0.954 mol bromine is added to 1 L reaction vessel that contains 1.22 mole of hydrogen and 1 mole of HBr at 1500K. What is the partial pressure of hydrogen, bromine and HBr at equilibrium?
Answer:
Partial pressure of H₂ → 149.9 atm
Partial pressure of Br₂ → 117.2 atm
Partial pressure of HBr → 112.8 atm
Explanation:
The problem can be solved by the Ideal Gases Law.
In a mixture of gases we know that the sum of partial pressures values the total pressure in the vessel. And the total pressure in the vessel is generated by the total moles which are presennt.
Total moles = 0.954 moles + 1.22 moles + 1 mol = 3.174 moles
Let's apply the Law to determine the total pressure.
P . 1 L = 3.174 moles . 0.082 . 1500 K
P = 390.4 atm
Now we apply the mole fraction concept
Mole fraction (1) → moles of gas / total moles
Mole fraction (2) → partial pressure of gas / total pressure
In conclussion 1 = 2
Partial pressure of H₂ → (1.22 / 3.174) . 390.4 atm = 149.9 atm
Partial pressure of Br₂ → (0.954 / 3.174) . 390.4 atm = 117.2 atm
Partial pressure of HBr → (1 / 3.174) . 390.4 atm = 112.8 atm
HEEEELLLPPPP PLEASE I WILL MARK BRAINLIEST
Why aren't the masses on the periodic table whole numbers?
i need help ):
soo.. help me ! please (:
Answer:
23 Sandwiches
6 slices of bread
0 slices of cheese
Explanation:
brainliest pls:)
When sodium atoms (Na) and chlorine atoms (CI) join to make
Answer: Potassium and fluorine
Explanation:
The two rows form bonds the easiest
Answer: #1
Explanation:
A sample is found to contain 2.98x10^-10 g of salt. Express this quantity in nanograms.
This quantity = 0.298 nanograms(ng)
Further explanationMass is one of the principal quantities, which is related to the matter in the object
The main mass unit consists of 7 units of other than other units of mass such as quintals, tons, pounds, ounces:
Kilogram, kg
Hectogram, hg
Decagram, dag
gram, g
Desigram, with
centigram, cg
milligram, mg
Each unit descends then multiplied by 10, and if one unit increases then divided by 10
Conversion of other mass units:
10⁻³ g ⇒mg-milligrams
10³ g ⇒kg-kilograms
10⁻⁶ g ⇒µg-micrograms (mcg)
10⁶ g ⇒Mg-megagrams (tons)
10⁻⁹ g ⇒ng-nanograms
10⁹ g ⇒Gg-gigagram
10⁻¹² g ⇒pg-pikogram
2.98 x 10⁻¹⁰ g to nanograms(ng)
[tex]\tt 2.98\times 10^{-10}\times 10^9=0.298~ng[/tex]
Question 1 (1 point)
A chemical reaction is when substances are changed into other substances.
True or False
11) Nitrogen oxides undergo many interesting reactions in the environment and in industry. Given the following information, calculate H for the overall equation:
2 NO2(g) + 1/2 O2(g) N2O5(s).
N2O5(s) 2 NO(g) + 3/2 O2(g), deltaH = 223.7 kJ
NO2(g) NO(g) + 1/2 O2(g), delataH = 57.1 kJ
delataH = ______kJ
12))))Write all coefficients, even if they are fractions or 1.)
(a) (Apply fractions as needed.)
______ _____(s) + ______ ______ (g) 5 NaCl(s)
(b) (Use the lowest possible coefficients.)
_______ _____ (s) + ______ _____(g) _____CaCl2(s)
(c) (Apply fractions as needed.)
_____ _____(g) _____O3(g)
(d) (Apply fractions as needed.)
______Mg(s) + _____ ______(s) + _____ ____(g) _____Mg3(PO4)2(s)
Answer:
one more time
Explanation:
shpuld i go