Answer: 2) Chloroform & Caustic potash
Explanation:
The carbylamine reaction is a kind of chemical test which is done to detect primary amines in an unknown solution. It cannot detect secondary and tertiary amines.
The reaction involves the heating with up of the unknown solution with alcoholic potassium hydroxide or caustic potash and the chloroform.
In the presence of primary amine, the production of isocyanide results.
Which of these electron configurations is not possible?
Answer:
D
Explanation:
Electrons are being filled according to the increasing other of their sublevel energy
what is the net force of 4N 2N!!
Answer: 4 N-2 N=2 Nto the left. Change in motion: The box will move to the left. 7.)
Explanation: Please mark branliest.
What is the name of each labeled part?
Answer:
A - dendrites
B - cell body
C - axon terminal
D - myelin sheath
E - nucleus
Hope that helps.
A-dendrite
B-cell body
C-axon terminal
D-axon
E-nucleus
What is the rise in sea level between 1930 and 2003?
A)
About 20cm
B)
About 16cm
C
About 12cm
Answer:
about 16
Explanation:
its 20 - ( approximately 5)
= approximately 16
Answer:
It should be (C) about 12cm
12.3 moles of sodium is what mass of Na?
Answer:
1 mole of Na = mass of 22.99 g, 1 mole of Si = mass of 28.09 g.
Which allotrope of phosphorus has less ignition temperature?
Answer:
kid poop i only did this for no reason
Explanation:
PLEASE HELP
Fossil fuels are burnt in power plants to produce electricity. Which one of the
following sequences show the correct order of energy transformation?
Answer:
a
Explanation:
Chemical then thermal because the carbon emissions produce heat
Then kinetic because there is energy transfer then electric because that's the finished result
A molecule contains 24.36 g of nitrogen and 62.64g of sliver
Answer:
This molecule is AgN3
Explanation:
Answer:
AgN3
Explanation:
Mass of nitrogen N is given as 24.36 g
Molar mass of nitrogen N= 14 g/mol.
amount of substance in mol of N = mass/molar mass
=24.36 g/ 14 g/mol.
=1.74 mol.
Given mass of silver= 62,64 g.
Molar mass of silver Ag=107.87 g/mol
Number of mols=62.64 g ÷ 107.87 g/mol.
=0.58 mol.
Ratio of number of mol of N and number of mols of Ag = 1.74 mol / 0.58 mol
=3:1
Hence, empirical formula is AgN₃.
Which organisms are typical decomposers?
Answer:
Insects, bacteria and fungi
Explanation:
Find three examples of synthetic compounds that contain aromatic rings. Indicate their source or importance
Answer:
Viagra, Cialis, and Levitra each contain aromatic rings.
They are all ED pills and come from drug manufacturing laboratories (you said "synthetic").
Explanation:
Which of the following redox conditions will produce a spontaneous reaction?
A. The sum of the voltages of the half-reactions is positive.
O B. The sum of the voltages of the half-reactions is negative.
O C. The voltage of the reduction half-reaction is positive.
D. The voltage of the reduction half-reaction is negative.
Answer:
A. The sum of the voltages of the half-reactions is positive.
Explanation:
correct on a p e x
Among the following redox conditions those will produce a spontaneous reaction is The sum of the voltages of the half-reactions is positive.
What are redox reactions?Redox reactions are the reactions in which reduction reaction and oxidation reaction happens simultaneously. The term ‘redox’ is a short form of reduction-oxidation. All the redox reactions can be broken down into two different processes: a reduction process and an oxidation process.
The loss of electrons and the corresponding increase in the oxidation state of a given reactant is called oxidation. The gain of electrons and the corresponding decrease in the oxidation state of a reactant is called reduction.
For example-
H₂ + F₂ → 2HF
Hydrogen is added to Fluorine gas so Fluorine has been reduced but Hydrogen has been oxidised.
Therefore, Among the following redox conditions those will produce a spontaneous reaction is The sum of the voltages of the half-reactions is positive.
Learn more about Redox reactions here:
https://brainly.com/question/13293425
#SPJ2
What is it called when elements combine to form a chemical compound?
Explanation:
A compound is a unique substance that forms when two or more elements combine chemically.Compounds form as a result of chemical reactions. The elements in compounds are held together by chemical bonds. A chemical bond is a force of attraction between atoms or ions that share or transfer valence electrons.hope it helpful ✌️✌️
3. What is the energy of a photon whose frequency is 5.2 x 1015 Hz? Use the equation: E = hxv
h= 6.626 10-34 J xs
4. What is the frequency of radiation whose wavelength is 2.40 x 105 cm? v=c+X
C= 3 x 108m/s
Answer:
3. 3.45×10¯¹⁸ J.
4. 1.25×10¹⁵ Hz.
Explanation:
3. Determination of the energy of the photon.
Frequency (v) = 5.2×10¹⁵ Hz
Planck's constant (h) = 6.626×10¯³⁴ Js
Energy (E) =?
The energy of the photon can be obtained by using the following formula:
E = hv
E = 6.626×10¯³⁴ × 5.2×10¹⁵
E = 3.45×10¯¹⁸ J
Thus, the energy of the photon is 3.45×10¯¹⁸ J
4. Determination of the frequency of the radiation.
Wavelength (λ) = 2.4×10¯⁵ cm
Velocity (c) = 3×10⁸ m/s
Frequency (v) =?
Next, we shall convert 2.4×10¯⁵ cm to metre (m). This can be obtained as follow:
100 cm = 1 m
Therefore,
2.4×10¯⁵ cm = 2.4×10¯⁵ cm × 1 m /100 cm
2.4×10¯⁵ cm = 2.4×10¯⁷ m
Thus, 2.4×10¯⁵ cm is equivalent to 2.4×10¯⁷ m
Finally, we shall determine the frequency of the radiation by using the following formula as illustrated below:
Wavelength (λ) = 2.4×10¯⁷ m
Velocity (c) = 3×10⁸ m/s
Frequency (v) =?
v = c / λ
v = 3×10⁸ / 2.4×10¯⁷
v = 1.25×10¹⁵ Hz
Thus, the frequency of the radiation is 1.25×10¹⁵ Hz.
manganese atom has 30 neutrons and atomic number 25
determine the electron cloud charge of manganese
Answer:
the most common oxidation no.of manganese is + 2 + 3 + 4 + 6 + 7
3. Calculate the number of moles and mass in
gram_of_1 x 10^20mdecules of Nz gas
.
Answer:
0.17×10⁻³ mol
Mass = 0.00476 g
Explanation:
Given data:
Number of molecules of N₂ = 1 ×10²⁰ molecules
Number of moles of N₂ = ?
Mass in gram of N₂ = ?
Solution:
1 mole of any substance contain 6.022×10²³ molecules
1 ×10²⁰ molecules× 1 mol /6.022×10²³ molecules
0.17×10⁻³ mol
Mass in gram:
Mass = number of moles × molar mass
Mass = 0.17×10⁻³ mol × 28 g/mol
Mass = 4.76×10⁻³ g
Mass = 0.00476 g
CH(4)+ 20(2)→ CO2+ 2H(2)O
22.
The reaction shown above is an example of a -
a. synthesis reaction
b. combustion reaction
c. decomposition reaction
d. double displacement reaction
Answer:
Reaction is a Combustion reaction
Two substances in a mixture differ in density and particle size. theses properties can be used to
Answer:
option 1. Two substances in a mixture differ in density and particle size. These properties can be used to separate the substances. These properties can be manipulated in order to have a better separation between the two substances.
Explanation:
Answer:
Two substances in a mixture differ in density and particle size. These properties can be used to separate both of them using the separating funnel or using filtration (filter paper).
Explanation:
Since their densities are different, one substance should float above the other in the mixture which allows for the separating funnel to let the substance sinking below (with the heavier density) to flow out first before changing the beaker to let the lighter substance flow out.
The substance with a bigger particle size would not be able to pass through the filter paper unlike the substance with the smaller particle size as the filter paper's pores is not big enough for it to pass through, separating both substances (with one on the paper and the other outside the filter paper, preferably in the beaker placed below the paper).
In 0.4 mole of H2S, how many atoms of H are there?
Answer:
8
Explain
H: Ignoring the coefficient, we know there's 5+3=8 atoms
SOMEONE HELP ME PLEASE ILL GIVE BRAINLY
are particles in gas close together
Answer:
Solid particles are close together not gas particles
+
OO
Od
Name a solvent that can be used for the follow
(a) removing ink from clothes
Answer:
PLEASE MARK AS BRAINLIEST!!
Explanation:
Apply rubbing alcohol, hairspray, or hand sanitizer to dilute the stain, making it easier to remove during the wash. These solvents help tackle most types of ink stains, but remember to test the stained garment for colorfastness first, as they can also attack fabric dyes and cause further damage.
The __________ system is responsible for bringing oxygen into the lungs and releasing carbon dioxide from the body
Answer:￣ﾉﾞ(｡･∀･)ﾉﾞo(*￣▽￣*)ブ(*￣3￣)╭o(*￣▽￣*)ブ(*￣3￣)╭(*￣3￣)╭(*￣3￣)╭(*￣3￣)╭(*￣3￣)╭(*￣3￣)╭(*￣3￣)╭(*￣3￣)╭(*￣3￣)╭(*￣3￣)╭(*￣3￣)╭(*￣3￣)╭(*￣3￣)╭(*￣3￣)╭(*￣3￣)╭(*￣3￣)╭(*￣3￣)╭(*￣3￣)╭(*￣3￣)╭(*￣3￣)╭(*￣3￣)╭(*￣3￣)╭(*￣3￣)╭•)>⌐)↖↗↘↙↜↚↯↟↝↖↔↕↙↘↙↘↘↞↴↯↚↨⇌⇋⇆⇉⇑↶⇋⇋↳¾⁷¼¼⁶⁴⁷⁰⁰⁰⁹⅕⅘⅓⅕⅓⅕⨊⨡⨔⨩⨦⨶⨼⨿⨷⨷⨻⨼⨹₴ The answer is resperitory
Explanation:
help me i put max points
Answer:
D. Catastrophism
Explanation:
Answer:
Catastrophism is the answer :p lol
Explanation:
Drag and drop the correct component and reactants to fill in the equation for photosynthesis
Answer:
6CO2 + 6H2O ----> C6H12O6 + 6O2
Explanation:
Photosynthesis is the process by which green plants manufacture their own food using sunlight in the presence of carbon dioxide water and chlorophyll.
Chlorophyll is the pigment in plants that absorbs light.
The equation of photosynthesis is shown in the answer section above. Sugar and oxygen are the first products of photosynthesis.
Methane(CH4) is a gas at room temperature, Methanol (CH3OH) is a liquid. Explain why using types of intermolecular forces present.
Explanation:
Methane is a gas at room temperature but methanol is a liquid because in methane there's London dispersion intermolecular force but in methanol there's H-bond and London dispersion force. H-bond is more stronger than London dispersion force. So, it increases the boiling point of methanol that's why methane is gas at room temperature due to weak attraction of London dispersion force and methanol is liquid.
Methanol has a higher boiling point than methane due to stronger intermolecular forces (IMFs), or attraction between individual molecules. This makes its molecules more difficult to separate, requiring more energy and resulting in a higher boiling point.
What are intermolecular forces?An intermolecular force is a force that mediates the interaction of molecules, including electromagnetic forces of attraction or repulsion that act between atoms and other types of neighboring particles, such as atoms or ions.
Intermolecular forces are classified into five types namely,
Ion-dipole forces.Ion-induced dipole forces.Dipole-dipole forces.Dipole-induced dipole forces.Induced dipole forces.Between ions and polar dipole molecules, ion-dipole forces exist.
Since of stronger intermolecular forces (IMFs), or attraction between individual molecules, methanol has a higher boiling point than methane.
This makes it more difficult to separate its molecules, requiring more energy and resulting in a higher boiling point.
Thus, this is the reason of using types of intermolecular forces present.
For more details regarding intermolecular forces, visit:
https://brainly.com/question/9007693
#SPJ2
what is CdF^4 compound name
Answer:
well it might be 1.)Cadmium Fluoride CdF2 150.4078
2.)Cadmium(II) Perfluorate Cd(FO4) 2278.403
3.)Cadmium Ferrocyanide Cd2Fe(CN) 6436.7714
Explanation:
Two liquids A & B are miscible with each other at room temperature. Which separation technique will you apply to separate the mixture of A & B if the difference in their boiling points is 27-degree celsius
Fractional distillation
2b. 12 grams of C8H18 react with oxygen to produce carbon dioxide and water. How many grams of CO2 are produced?
12.4
13.5
11.6
37.1
Other:
Answer:
37.1g are produced
Explanation:
The combustion of C₈H₁₈ is:
C₈H₁₈ + 25/2O₂ → 8CO₂ + 9H₂O
Where 1 mole of C₈H₁₈ produce 8 moles of CO₂
To find the mass of CO₂ that is produced we need to convert the mass of C₈H₁₈ with molar mass. Then, with the chemical equation, we can find the moles of CO₂ and its mass, as follows:
Moles C₈H₁₈ -Molar mass: 114.2g/mol-
12g C₈H₁₈ * (1mol / 114.2g) = 0.105 moles of C₈H₁₈
Moles CO₂:
As 1 mole of C₈H₁₈ produce 8 moles of CO₂, 0.105 moles of C₈H₁₈ produce:
0.105 moles of C₈H₁₈ * (8moles CO₂ / 1mole C₈H₁₈) = 0.84 moles of CO₂
Mass CO₂ -Molar mass: 44.01g/mol-:
0.84 moles of CO₂ * (44.01g / mol) = 37.0g of CO₂ ≈
37.1g are produced_AICI3–> _AI + _Cl2
I need help
Answer:
2AlCl₃ ⇒ 2Al + 3Cl₂
Explanation:
Balance the equation–making sure there's an equal amount of reactants and products on both sides.
Agl + Na25 yields Ag2S + Nal
Explanation:
Agl+hih+356bnh$&56DG hug zero cg hydh hod sir un bucks