1. SEP Developing and Using Models Look at the data in the table. Construct a
graph of the atomic numbers versus melting point temperature. Plot each group
using a different color or symbol so that you can tell them apart. Remember to
assess the range of the data before deciding on the scale for each axis.
Answers
Answer: do you syill need help on it i am happy to help
Explanation: TELL ME
Related Questions
2. What problem did astronaut Eugene Cernan encounter while on an EVA? How did it relate to
Newton's third law of motion?
Answers
Answer:
Well he couldn't be pushed back as there isn't a place for him to float back, because of Newton's third law: Every force has an opposite force when Eugene pushes, he will float backwards
Explanation:
Hope this helps!
can someone please explain how to find an emperical formula given mass not percentage?
Answers
Answer:
1. Get the mass of each element by assuming a certain overall mass for the sample (100 g is a good mass to assume when working with percentages). ...
2. Convert the mass of each element to moles. ...
3. Find the ratio of the moles of each element. ..
4. Use the mole ratio to write the empirical fomula
Answer:
Multiply each result by the given mass.
Explanation:
Hi!
In order to find percent/mass composition you would
1. write the formula
2. calculate the molar mass for each equation
3. add all the masses to get the compound molar mass
4. divide each molar mass by the total mass
and then for mass composition, you would multiple eachy result by the given mass.
For example;
Calculate the number of grams of gold in 89.6 grams of gold(1) perchlorate.
Your formula would be AuClo4
Au : 196.96 x 1
Cl: 35.4 x 1
O: 16 x 4
Add the masses together to get 296.5 g/mol
Lets say we're looking for Oxygen. You would take what you got (16 x 4) and divide it by the total mass. 64/296.5
This would equal 0.215. Instead of multiplying this by 100 like you would for percent, for mass you would multiply by what is given. in this instance it is 89.6.
0.215 x 89.6 = 19
But the question is asking for gold,
197/296
= 0.664 x 89.6
= 59.5
Your answer would be 59.5 grams Au
Hope this helped! : D
if you can’t already tell by the amount of questions i do not understand chemistry lol, giving brainliest
Answers
Answer:
Ok, so the process here is to convert the mass of H2 (hydrogen gas) to moles by dividing the mass by the molar mass of H2. Once you have the moles then you have to multiply by the STP (standard temperature and pressure) molar volume which should be 22.4.
Molar mass of H2 = (1.01)x2 = 2.02g/mol
19.3/2.02 = 9.55 moles
Now just multiply the moles by the molar volume
9.55 moles x 22.4 = 213.92 Litres of H2 are in 19.3g of H2
A small container of perfume is opened in a classroom. Soon every student in the room smells the perfume. Explain this in terms of molecules.
Answers
When perfume or cologne is sprayed into the air, it turns into a gas and its particles mix with other air particles that quickly move around the room. This is because gas is the least dense of the three states of matter. It moves quickly into any space or volume because it has the least density. This is called diffusion, when molecules or particles move from areas with high concentration to low concentration areas.
Sleet forms directly from which type of precipitation?
Answers
Sleet is a type of precipitation that is formed by water and snow that is usually partially molten.
What is sleet?
Sleet consists of icy raindrops that hit the surface, that is, part of the precipitation is frozen and the other forms water droplets.
Characteristics of sleet precipitation
The term precipitation refers to water in any form that falls from the sky, sleet is a kind of solid precipitation that occurs at some stage in winter.
Sleet is formed by freezing raindrops or partially melted snowflakes as they fall through a layer of cold air.
Therefore, we can conclude that sleet is a form of winter precipitation, in which rain and snow occur at the same time.
Learn more about sleet here: https://brainly.com/question/25414642
Answer: C) Rain droplets
Explanation: Trust me.
A) Oxygen
B) water and oxygen
C) water and carbon dioxide
D) water and carbon monoxide
Answers
Answer:
A
Explanation:
this is because combustion is the chemical reaction between surfaces including OXYGEN to generate heat and light in the form of flame
What is the dependent variable in this graph
Answers
Answer:
height (mm)
Explanation:
The independent variable belongs on the x-axis (horizontal line) of the graph, and the dependent variable belongs on the y-axis (vertical line).
Elements in a vertical column on the Periodic Table have similar properties and are all members of the same
of elements.
ME
A
molecule
HD
B
phase
С
atom
D
group
Answers
Answer:
Explanation:
I think it's D but I could be wrong
Answer:
D
Explanation:
The three nuclides, U-233, U-235, and U-238, are isotopes of uranium because they have the same number of protons per atom and
Answers
Answer:
Electrons
Explanation:
Isotopes are atoms which have the same number of protons and electrons but a different number of neutrons. This is also the reason why there are no other changes in the atom but the mass of the specific atom changes.
Hope this helps :)
Merry Christmas. Have fun.
Name these ionic compounds
12. Ag3N
13. NaF
14. Ba
15. Na2S
16. AIBr;
17. LiN
18. KF
19. Srl2
20. Mgo
21. Al2O3
22. CaH2
Answers
12. silver nitride
13. Sodium fluoride
14. barium
15. sodium sulfide
16. aluminium bromide
17. lithium nitride
18. potassium sulfide
19. strontium iodide
20. magnesium oxide
21. aluminium oxide
23. calcium hydride
20 points be right this is my final!!!
Answers
How many grams of ammonia are produced from 6 moles of nitrogen?
Answers
Answer: The equation is 3H2 + N2 → 2NH3
If 6 moles of H2 gas react with N2 (assuming all reactants react)
6 * 2/3 moles of ammonia must be produced.
Therefore 4 moles of ammonia can be produced.
Since it is a gaseous equation (all reactants/products are gases), we can just assume that the Mr of the gases do not affect the amounts of the reactants or the products.
what does the heisenberg uncertainty principle state
Answers
Answer: It states that there is a fundamental limit to what one can know about a quantum system.
Explanation:
(01.07 HC)
A student collected the data shown in the table below during an experiment.
Liquid Characteristics
Liquid Characteristics
Boiling Point Freezing Point Color Expansion per Degree Change in Temperature
Mercury 357 °C −39 °C shiny silver gray relatively lower
Alcohol 78 °C −115 °C colorless relatively higher
Based on the data, which of the following conclusions can be made about the use of mercury and alcohol thermometers?
A mercury thermometer can measure the freezing point of a liquid that freezes at −80 °C.
An alcohol thermometer can measure the boiling point of a liquid that boils at 80 °C.
A mercury thermometer is better to measure very small changes in temperature.
An alcohol thermometer is better to measure the boiling points of colorless liquids.
Answers
Answer: a mercury thermometer is better to measure very small changes in temperature
Explanation:
i took the test and got it right
Answer:
the answer is C, a mercury thermometer is better to measure very small changes in temperature.
Explanation:
i just took the test and it was correct :)
PLEASE DON'T PUT ANSWER AGAINST GUIDELINES!!!
Answers
Answer:
160.3 g S
Explanation: there you go
Different isotopes of an element have different numbers of:
Answers
Explanation:
Different isotopes of an element have different numbers of mass number
Give atleast 5 differences in cell structures of plant and animal cells
Answers
PLZZZZ HELP MEEE I WILL GIVE BRAINLYEST I need more then ever so can you can pls help a bro out I need this done in before 5:00 it 2:00 now
Answers
Answer:
If it becomes buried deep into the earth and it is open to increased temperate and pressure. Then an Igneous rock could be Metamorphic. This process can take a lot of time but eventually the rock will change due to pressure andbhigher temperatures.
What rule predicts the, stability of a atoms forming compounds.
Answers
Answer:The octet rule
Explanation:that there is eight electrons in the valence shell to make it stable.
Explanation:
atom with greater stability have less energy, so a reaction that the stability of the atom will release in the form of heat or light.
6.23 X 10^6 KL + 5.34 × 10^6 kL
Answers
Which non metal is highly reactive
Answers
Answer:
element fluorineThe most reactive nonmetals reside in the upper right portion of the periodic table. Since the noble gases are a special group because of their lack of reactivity, the element fluorine is the most reactive nonmetal.3CaCl2 + Al2O3 —> 3CaO + 2AlCl
Answers
im not sure about the answer sorry in advance if it's wrong
Which adaptation allowed gymnosperm plants to out-compete spore-bearing plants? stems leaves roots seeds
Answers
Give braniliness
AH = ?
Select one:
O a. Hproducts/Hreactants
O b. products-Hreactants
O c. Hreactants+H products
O d. Hreactants-Hproducts
Answers
Answer:
I think its C
Explanation:
What does it mean by solution in salt solution, sugar solution, etc.
Answers
Sugar solution means water and sugar mixed until dissolved.
In a bond between potassium (K) and bromine (Br),
A.
the potassium atom will gain an electron and become smaller as a cation, while the barium atom will lose an electron and become bigger as an anion.
B.
the potassium atom will lose an electron and become smaller as an anion, while the barium atom will gain an electron and become bigger as a cation.
C. the potassium atom will gain an electron and become smaller as an anion, while the barium atom will lose an electron and become bigger as a cation.
D.
the potassium atom will lose an electron and become smaller as a cation, while the barium atom will gain an electron and become bigger as an anion.
Answers
Answer:
D (But as a heads up, you wrote barium instead of Bromine)
Explanation:
The Potassium atom will lose an electron since its valence shell only has one, while Bromine has 7 electrons in its valence shell. Potassium wants to get rid of its one electron, Bromine wants to gain that one electron to get a full shell.
Potassium will become a CATION with a positive charge (since it lost an electron), Bromine will become an ANION with a negative charge (since it gained an electron)
The atomic mall mass is an element depends upon the.
Answers
Answer:
Mass and relative abundance of each isotope of that element
The atomic mass of element has been dependent on mass of each isotopes and their abundance in nature.
The atomic mass has been the mass of neutrons and protons of the element. There has been the presence of the isotopes of the elements, with varying abundance, and varying atomic masses.
The atomic mass of the element has been the relative average atomic mass of the element with respect to the mass of the isotopes and their percent abundance.
The average atomic mass (amu) has been given by:
[tex]amu=M_1A_1\;+\;M_2A_2[/tex]
Where, [tex]M_1A_1[/tex] has been the atomic mass and abundance of isotope 1.
[tex]M_2A_2[/tex] has been the atomic mass and abundance of isotope 2.
Thus, the average atomic mass has been dependent on mass of each isotopes and their abundance in nature.
For more information about the atomic mass, refer to the link:
https://brainly.com/question/5566317
What does the electron configuration for the noble gases tell us about the elements in the
group
Answers
Answer:That all noble gases will have 8 valence electrons which makes a atom stable
Explanation:
hydrofluoric acid
What’s the formula
Answers
Hydrofluoric acid/Formula
______________________
HF
______________________
o0o0o0o0o0o0o0o0o0o0o0
______= Speed / Wavelength
Answers
Answer:
Frequency
Explanation:
It’s kinda self-explanatory but bascially speed=wavelength times frequency
Answer:
Frequency is Speed divided by Wavelength
Step-by-step explanation:
Don't think there needs to be an explanation for the formula, unless you want the conceptual understanding