1. Determine the percentage composition of each of the following compounds:

a. NaClO b. Al 2 (SO 3 ) 3 c. C 2 H 5 COOH d. BeCl 2

2. Determine the percentage by mass of water in the hydrate CuSO 4 5H 2 O

One FADH2 molecule is created for every beta oxidation cycle. Consequently, after the provided fatty acid is completely oxidised, a total of 7 FADH2 molecules will be created.

In seven cycles of this oxidation, a 16-carbon fatty acid loses two carbons as acetyl-CoA, producing a total of eight molecules of acetyl-CoA.

Nine rounds of beta oxidation are necessary to completely oxidise a fatty acid with a 20-carbon hydrocarbon tail because the organic byproduct of beta oxidation has two carbons.

To know more about oxidation visit:-

https://brainly.com/question/16976470

#SPJ1

According to the information in the graph, the soil with the composition of Sand: 20%, Clay 50% and Silt 30%, would be a silty clay soil.

The Soil Texture Triangle is a term to refer to a soil analysis tool that is used to calculate the percentage of each component in a soil. The components used in this graph are: Clay, silt and sand. For example, if a soil contains 60% sand, 30% silt and 10% clay, it corresponds to a sandy loam texture.

According to the above, we can infer that a soil with the components of Sand: 20%, Clay 50% and Silt 30% would be a silty clay soil.

Note: This question is incomplete. Here is the complete information:

Classify the soil based on its composition: Sand: 20%, Clay 50% and Silt 30%.

Learn more about soil in: https://brainly.com/question/23813511

#SPJ1

Answer:

To configure the electron sublevels and groups for each element, we can use the following format:

Element symbol: [Electron configuration] Sublevel: Group

V (Z=23): [Ar] 3d3 4s2 Sublevel: 3d, 4s Group: 5, 4

Ni (Z=28): [Ar] 3d8 4s2 Sublevel: 3d, 4s Group: 10, 4

Cu (Z=29): [Ar] 3d10 4s1 Sublevel: 3d, 4s Group: 11, 4

Zn (Z=30): [Ar] 3d10 4s2 Sublevel: 3d, 4s Group: 12, 4

Cr (Z=24): [Ar] 3d5 4s1 Sublevel: 3d, 4s Group: 6, 4

Mn (Z=25): [Ar] 3d5 4s2 Sublevel: 3d, 4s Group: 7, 4

Answer:

Explanation:

0.01042 moles Fe --how to calculate (0.00521/2 moles X 4 moles)  the 2 and 4 are the coefficients in the chemical equation

2.8005 moles O2-- how to calculate  (1.867 / 2 X 3 moles O2)

7.155 moles Fe    calculate it this way (9.54 / 4 moles Fe  X 3 moles O2

0.7707 moles Fe   ---(0.578 / 3 moles O2  X 4 moles Fe)

The oil will disperse due to the emulsifying properties of the dishwashing liquid, which breaks the oil down into smaller droplets so it can mix with the water more easily. This reduces the overall surface tension, allowing the oil to spread out more evenly in the water. The chemicals (dye) that were added to the oil will be spread out as well, resulting in a less visible stain. The water will take on the color of the dye, so it will appear as a colored stain on the surface of the water.

The oil disperses because the dishwashing liquid acts as an emulsifier and reduces the surface tension of the oil, allowing it to spread out and mix with the water more easily. The dye is spread out as well, resulting in a less visible stain. The water will take on the color of the dye, giving the water a colored appearance.

Overall, the addition of the dishwashing liquid causes the oil to disperse, the dye to spread out, and the water to take on the color of the dye. This makes the oil less visible, making it easier to clean up.

Know more about surface tension here:

https://brainly.com/question/11348644

#SPJ11

Overall order of reaction is 2

The order of a chemical reaction is the relationship between the rate of the reaction and the concentration of the reactants. It is determined experimentally and can be used to predict the rate of a reaction under different conditions.

We know that for A;

4 * 10^-3/2 * 10^-3 = (0.1/0.5)

2= (2^-1)^n

1 = -n

n = -1

For B;

8 * 10^-3/1 * 10^-3 = 0.1/0.05

8 = 2^n

2^3 = 2^n

n = 3

The overall order of the reaction is -1 + 3 = 2

Learn more about order of reaction:https://brainly.com/question/1769080

#SPJ1

There are two elements present in each of the following:

(a) HF and HF = Hydrogen and Fluorine
(b) Co and CO = Cobalt and Carbon Monoxide
(c) Si and SiO2 = Silicon and Silicon Dioxide
(d) PoCI2 and POCI3 = Phosphorus Chloride and Phosphorus Chloride Iodide

(a) HF is the chemical formula for hydrogen fluoride, a colorless gas or a colorless fuming liquid with a pungent odor. It contains one atom of hydrogen and one atom of fluorine, making it a binary compound.

(b) Co is the chemical symbol for cobalt, a hard, lustrous, silver-gray metal. CO is the chemical formula for carbon monoxide, a colorless, odorless gas that is highly toxic. CO contains one atom of carbon and one atom of oxygen, making it a binary compound.

(c) Si is the chemical symbol for silicon, a hard, brittle, crystalline solid with a blue-gray metallic luster. SiO2 is the chemical formula for silicon dioxide, also known as silica, a white or colorless crystalline compound found in many minerals. SiO2 contains one atom of silicon and two atoms of oxygen, making it a ternary compound.

(d) PoCl2 is the chemical formula for polonium dichloride, a yellow solid with a melting point of 60 °C. It contains one atom of polonium and two atoms of chlorine, making it a binary compound. PCl3 is the chemical formula for phosphorus trichloride, a colorless or yellow liquid with a pungent odor. It contains one atom of phosphorus, three atoms of chlorine, and no oxygen, making it a ternary compound. However, the compound POCI3 (phosphoryl chloride) contains one atom of phosphorus, one atom of oxygen, and three atoms of chlorine, making it another ternary compound.

For more question on elements click on

https://brainly.com/question/20096027

#SPJ4

Answer:

This assumes that NH3G is supposed to be NH3.

1.31x10^9 grams of NH3  [Note comment in the Explanation section.]

Explanation:

1)  Determine the molar mass of NH3:  17.0 g/mole

2)  Determine the moles of NH3:

1 mole NH3 = 6.02x10^23 molecules NH3  Use this as a conversion factor.

  (7.93x10^32 molecules NH3)*((1 mole NH3)/(6.02x10^23 molecules NH3)

The molecules NH3 cancel and we're left with moles.

 This is equal to 1.31x10^9 moles!  [Was the exponent for the mass supposed to be 10^23 instead of 10^32?]

3)  Determine the mass of 1.31x10^9 moles of NH3

   (1.31x10^9 moles)*(17.0 g/mole) = 1.31x10^9 grams of NH3

[That is 2,888,055 pounds]

The theoretical yield of H2O from 68.75 g of C4H10 is 106.6 g.

We now know that the theoretical yield of CO2 C O 2 is 2.56 mol since the limiting reactant dictates it.

For the combustion of C4H10, the balanced equation is:

2C4H10 + 13O2 → 8CO2 + 10H2O

First, let's calculate the number of moles of C4H10:

molar mass of C4H10 = 4(12.01) + 10(1.01) = 58.12 g/mol

C4H10 mass is equal to its molar mass in C4H10 moles.

moles of C4H10 = 68.75 g / 58.12 g/mol

moles of C4H10 = 1.183 mol

According to the balanced equation, 2 moles of C4H10 produce 10 moles of H2O. As a result, the amount of water generated is:

moles of H2O = (moles of C4H10) x (10 moles H2O / 2 moles C4H10)

moles of H2O = 1.183 mol x 5

moles of H2O = 5.915 mol

The amount of moles of water can finally be converted to grams:

molar mass of H2O = moles of H2O x

mass of H2O = 5.915 mol x 18.02 g/mol

mass of H2O = 106.6 g.

To know more about theoretical yield visit:-

https://brainly.com/question/14966377

#SPJ1

The kind of intermolecular forces that act between a chloroacetylene molecule and a dichloroethylene molecule is dipole-dipole and London dispersion forces.

Let's understand this in detail:

1. Intermolecular forces are the forces of attraction or repulsion between molecules. Different types of intermolecular forces exist, such as dipole-dipole forces, London dispersion forces, and hydrogen bonding. These forces play a significant role in determining the physical properties of a substance, such as melting point, boiling point, and vapor pressure.

2. The chloroacetylene molecule and a dichloroethylene molecule are polar molecules with positive and negative ends. The positive and negative ends of the molecules attract each other by a dipole-dipole force.

3. Dipole-dipole forces are the forces of attraction between polar molecules. The strength of these forces depends on the magnitude of the molecule's dipole moment. The larger the dipole moment of the molecule, the stronger the dipole-dipole force.

4. London dispersion forces occur between nonpolar molecules such as dichloroethylene. The molecule's electrons are constantly in motion, and they may be distributed unevenly at any instant. The temporary distribution of electrons creates an instantaneous dipole that attracts neighboring molecules. The instantaneous dipoles fluctuate with time, leading to temporary dipoles in neighboring molecules. The temporary dipoles result in attractive forces between the molecules.

5. In conclusion, the type of intermolecular forces that act between a chloroacetylene molecule and a dichloroethylene molecule is dipole-dipole and London dispersion forces.

Learn more about intermolecular forces: Intermolecular forces hold together which of the following? https://brainly.com/question/2193457

#SPJ11

Two characteristics that will indicate that it is a tree would be the presence of a trunk and roots.

Two characteristics that will indicate it is an apple tree would be the presence of flowers and apple fruits.

Structures to indicate that it is a tree:

Characteristics to indicate it is an apple tree:

More on trees can be found here: https://brainly.com/question/13895881

#SPJ1

Answer:

The answer is E) none of the above.

In all of the given reactions, mass and charge are conserved. The law of conservation of mass states that the mass of reactants must be equal to the mass of the products in a chemical reaction. The law of conservation of charge states that the total charge of the reactants must be equal to the total charge of the products.

In reaction A, the water molecule dissociates into a hydrogen ion (H+) and a hydroxide ion (OH-), but the total mass and charge are still conserved.

In reaction B, the reduction of CIO2 to Cl- is balanced by the oxidation of water to form OH-. The electrons and charge are conserved.

In reaction C, H2SO4 reacts with NaOH to form Na2SO4, H+ and OH-. The mass and charge are conserved.

In reaction D, ZnCl reacts with water to form ZnOH, H+ and Cl-. The mass and charge are also conserved.

In the lab, a chemist created 26.75 moles of potassium oxide. particles of potassium oxide produced by the chemist is 1.610 x

[tex] {10}^{25} [/tex]

To determine the number of particles of potassium oxide, we need to know the Avogadro's number which is 6.022 x

[tex] {10}^{23} [/tex]

particles per mole.

So, we can calculate the number of particles of potassium oxide as follows:

Number of particles = number of moles x Avogadro's number

Number of particles = 26.75 moles x 6.022 x

[tex] {10}^{23} [/tex]

particles/mole

Number of particles = 1.610 x

[tex] {10}^{25} [/tex]

particles

Therefore, there are 1.610 x

[tex] {10}^{25} [/tex]

particles of potassium oxide produced by the chemist.

Avogadro's number is a fundamental constant in chemistry and physics that represents the number of atoms, molecules, or other particles in one mole of a substance.

learn more about Avogadro's number here:

https://brainly.com/question/11884840

#SPJ4

The right response is b) APF is higher for a box filled with bronze balls.

The atomic packing factor (APF) is a measure of the amount of space that is occupied by atoms in a crystal structure. It is calculated by dividing the total volume of atoms in a unit cell by the volume of the unit cell. The higher the APF, the more closely packed the atoms are in the crystal structure.

In this case, since the boxes have the same dimensions, the unit cell for both boxes will be the same. However, the size and weight of the balls differ. The wooden balls are more massive than the hollow bronze balls, but they are smaller in size. This means that the wooden balls will have a higher density and will occupy less space than the hollow bronze balls.

Since the APF is calculated based on the volume of atoms in the unit cell divided by the volume of the unit cell, the size and density of the balls will affect the APF. In this case, the hollow bronze balls will occupy more space in the unit cell compared to the wooden balls, as they have a larger radius and lower density. Therefore, the box filled with hollow bronze balls will have a higher APF compared to the box filled with wooden balls.

Therefore, the correct answer is b) Box filled with bronze balls has higher APF.

To learn more about APF refer to:

brainly.com/question/14619166

#SPJ4

Car crashes are related to balanced and unbalanced forces because the forces acting on a car determine its motion.

Explain balanced forces and unbalanced forces in a car crash?

Balanced forces are those that cancel each other out, resulting in no change in motion, while unbalanced forces cause a change in motion. In the case of a car crash, the forces involved are unbalanced, resulting in a change in motion.

The mass of the car also plays a crucial role in determining the outcome of a car crash. The greater the mass of the car, the more force it will experience during a crash, and the greater the potential for damage. Additionally, the acceleration of the car can impact the severity of the crash. The faster the car is traveling, the greater the force it will experience upon impact, resulting in a more severe crash.

Speed is another important factor that affects car crashes. When a car is traveling at a high speed, it has more kinetic energy, which means it has more potential for causing damage upon impact. The energy of the car is transferred to the object it collides with, which can result in injury or damage.

Overall, car crashes are a result of unbalanced forces acting on a car, which can be influenced by factors such as mass, acceleration, and speed. Understanding these concepts can help us better understand the physics behind car crashes and ultimately lead to safer driving practices.

To learn more about Car crashes, visit: https://brainly.com/question/29730934

#SPJ1

Answer:

General rule:

When solids, liquids, and gases are warmed, the particles gain kinetic energy and move faster, resulting in an increase in volume for liquids and gases, and a small expansion for solids. When cooled, the particles lose kinetic energy and move slower, resulting in a decrease in volume for liquids and gases, and a small contraction for solids.

Exceptions:

There are some exceptions to this rule, such as water, which exhibits anomalous behavior upon cooling. Water contracts upon cooling until it reaches 4°C, then it begins to expand upon further cooling. Additionally, some solids exhibit a unique property called thermal expansion, where they expand upon heating and contract upon cooling, opposite to the expected behavior.

Answer:

A answer is write answer

Answer: 3 ,2, 6

Explanation:

3 Cu(NO3)2 + 2 K3PO4 → Cu3(PO4)2 + 6 KNO3

According to the meaning of a fossil, a fossil is a once-living organism's remains that have been kept by nature

A fossil is any conserved remnants, imprint, or evidence of any once-living object from a previous geological era (from the Classical Latin fossilis, lit. "obtained by excavating"). Examples include exoskeletons, bones, shells, animal or microbe impressions in stone, items kept in amber, hair, petrified wood, and Genetic traces. The sum of fossils is known as the fossil record.

The study of fossils, including their age, creation process, and evolutionary importance, is known as palaeontology. If a specimen is more than 10,000 years old, it is typically regarded as a relic.

Learn more about fossil

https://brainly.com/question/14988327

#SPJ1

Trans 1,3-Dichlorocyclobutane. The C-cl bonds are opposed to one another, thus the dipole moment should cancel out and be zero. Nevertheless, because of the four-member ring strain, cyclobutene is stable in a puckered configuration with three carbons in one plain and one carbon above the plain.

Because one C-Cl bond in cyclobutene [Trans-1,3-dichlorocyclobutane] is axial and the other is equatorial, they won't cancel each other out and the net dipole moment won't be zero. This hopping never stops. When there is a separation of charge, dipole moments happen. They can occur between two ions in an ionic bond or between atoms in a covalent link; dipole moments result from changes in electronegativity. The dipole moment increases with the difference in electronegativity.

Learn more about dipole moment here:

https://brainly.com/question/25385184

#SPJ4

Complete Question:

Trans-1,3-dichlorocyclobutane has a measurable dipole moment. Explain why the individual dipole moments of C-Cl bonds do not cancel each other t produce a zero net dipole moment?

The volumes of N₂ gas and H₂ gas required to form 28.5 grams of N₂H₄ at 30oC and 1.50 atm are 14.3 L and 28.6 L, respectively.

To determine the volumes of N₂ gas and H₂ gas required to form 28.5 grams of N₂H₄ at 30oC and 1.50 atm, we need to use the ideal gas law to calculate the number of moles of each gas needed, and then use the balanced chemical equation to determine the volume of each gas.

Calculate the number of moles of N₂H₄

The molar mass of N₂H₄ is:

Molar mass N₂H₄ = 2 x molar mass N + 4 x molar mass H

Molar mass N₂H₄ = 2 x 14.01 g/mol + 4 x 1.01 g/mol

Molar mass N₂H₄ = 32.05 g/mol

The number of moles of N₂H₄ can be calculated as follows:

n(N₂H₄) = mass / molar mass

n(N₂H₄) = 28.5 g / 32.05 g/mol

n(N₂H₄) = 0.890 mol

Determine the number of moles of N₂ and H₂ required

From the balanced chemical equation, we see that 1 mole of N₂ reacts with 2 moles of H₂ to produce 1 mole of N₂H₄. Therefore, the number of moles of N₂ and H₂ required can be calculated as follows:

n(N₂) = n(N₂H₄) = 0.890 mol

n(H₂) = 2 x n(N₂H₄) = 1.780 mol

Use the ideal gas law to calculate the volumes of N2 and H2

The ideal gas law is given by:

PV = nRT

where P is the pressure, V is the volume, n is the number of moles, R is the gas constant (0.0821 L atm/mol K), and T is the temperature in Kelvin.

We are given P = 1.50 atm and T = 30oC = 303 K.

For N₂ gas:

n(N₂) = 0.890 mol

R = 0.0821 L atm/mol K

T = 303 K

P = 1.50 atm

Solving for V, we get:

V(N₂) = n(N₂)RT/P

V(N₂) = 0.890 mol x 0.0821 L atm/mol K x 303 K / 1.50 atm

V(N₂) = 14.3 L

For H₂ gas:

n(H₂) = 1.780 mol

R = 0.0821 L atm/mol K

T = 303 K

P = 1.50 atm

Solving for V, we get:

V(H₂) = n(H₂)RT/P

V(H₂) = 1.780 mol x 0.0821 L atm/mol K x 303 K / 1.50 atm

V(H₂) = 28.6 L

To know more about ideal gas law here

https://brainly.com/question/4147359

#SPJ4

Answer:

To make a sample of cobalt chloride crystals from cobalt oxide and dilute hydrochloric acid, follow the steps below:

Add cobalt oxide to dilute hydrochloric acid in a beaker or flask. Stir the mixture to ensure the cobalt oxide is well distributed in the acid.

Heat the mixture gently, stirring constantly, until all of the cobalt oxide has dissolved in the acid.

Filter the solution to remove any impurities.

Slowly add hot distilled water to the solution, stirring continuously, until the solution is saturated (i.e., no more cobalt chloride can dissolve in the solution).

Set the solution aside to cool. As the solution cools, cobalt chloride crystals will begin to form.

Once the solution has cooled completely, remove the cobalt chloride crystals from the solution using a filter or other method.

Rinse the crystals with distilled water to remove any remaining impurities.

Dry the cobalt chloride crystals thoroughly by placing them on a paper towel or in an oven at low temperature.

Explanation:

In the egg drop project, Students will apply the principles of momentum and impulse to build housing for an egg survive being dropped from the maximum height possible to solve for momentum and force.

In the egg drop project, there will be several drops from various heights.  The egg must survive lower heights to progress to the highest. Student will try a few smaller heights. Only those who survive that is not leaking the smaller drops may proceed to the higher levels. From this egg drop theory a cracked egg is defined as one that is visibly leaking its contents. After each drop, student must be able to quickly open the container to show the egg. Grade will drop if not able to open quickly and may occur error. The container must be constructed with a hatch or a door so that the egg can be inserted or withdrawn too quickly. From this the momentum and the impulse can be determined.

To learn more about  egg drop project

https://brainly.com/question/18758185

#SPJ4

A buffer solution is made by mixing 375 ml of 0.25 m hf and 225 ml of 0.50 m naf. The ph of:

the original buffer solution is: 3.24,

the solution after adding 0.018 mol of KOH to the original buffer solution is: 9.85,

the solution after adding 12.5 ml of 1.25 m HI to the original buffer solution is 0.88.

A buffer solution is created by combining a weak acid and its conjugate base, which together maintain a relatively constant pH despite the addition of small amounts of acid or base. In this question, 375 mL of 0.25 M HF and 225 mL of 0.50 M NaF are mixed together to form the buffer solution.

The pH of the original buffer solution can be calculated using the Henderson-Hasselbalch equation, which states that [tex]pH = pKa + log([A-]/[HA]).[/tex]

In this case, [A-] is the concentration of the conjugate base (NaF) and [HA] is the concentration of the weak acid (HF). Plugging in the values given, the pH of the original buffer solution is 3.24.

After adding 0.018 moles of KOH to the original buffer solution, the pH can be calculated using the same Henderson-Hasselbalch equation. Since KOH is a strong base, the concentration of the conjugate base (NaF) increases and the concentration of the weak acid (HF) decreases. Plugging in the values, the pH of the solution after the addition of KOH is 9.85.

After adding 12.5 mL of 1.25 M HI to the original buffer solution, the pH can be calculated using the Henderson-Hasselbalch equation. Since HI is a strong acid, the concentration of the conjugate base (NaF) decreases and the concentration of the weak acid (HF) increases. Plugging in the values, the pH of the solution after the addition of HI is 0.88.

In conclusion, the original buffer solution had a pH of 3.24, the solution after the addition of 0.018 moles of KOH had a pH of 9.85, and the solution after the addition of 12.5 mL of 1.25 M HI had a pH of 0.88.

To know more about buffer solutions refer here:

https://brainly.com/question/24262133#

#SPJ11

Answer:

Australia about half a century ago, scientists have been tantalized by the possibility that the building blocks of life originated in space

The ability of a material to carry electricity is referred to as conductivity. Below are some illustrations of various conductivity components:

learn more about conductivity here

https://brainly.com/question/24943129

#SPJ1