What are the signs of ΔH, ΔS, and ΔG for the spontaneous conversion of a crystalline solid into a gas?
Answer:
ΔH>0, ΔS>0, and ΔG<0
Explanation:
Crystalline solid → Gas
ΔG < 0 T as the reaction is Spontaneous The solid is converted into gas so the Entropy will increase as randomness is more in gas than solid, ΔS > 0using Gibbs equation
ΔG = ΔH - TΔS
as ΔG < 0 and ΔS > 0
ΔH - TΔS <0
ΔH < TΔS ⇒ΔH >0
This gives that ΔH will be Positive but it will be less than TΔS. So we need to provide some energy to convert crystalline solid into gas.
A gas has a density of 1.57 g/L at 40.0 °C and 2.00 atm of pressure. What is the identity of the gas?
Answer:
Neon
Explanation:
Step 1: Given and required data
Density of the gas (ρ): 1.57 g/LTemperature (T): 40.0°CPressure (P): 2.00 atmIdeal gas constant (R): 0.08206 atm.L/mol.KStep 2: Convert T to Kelvin
We will use the following expression.
K = °C + 273.15 = 40.0 + 273.15 = 313.2 K
Step 3: Calculate the molar mass of the gas (M)
For an ideal gas, we will use the following expression.
ρ = P × M/R × T
M = ρ × R × T/P
M = 1.57 g/L × 0.08206 atm.L/mol.K × 313.2 K/2.00 atm
M = 20.17 g/mol
The gas with a molar mass of 20.17 g/mol is Neon.
In Chemistry, the gas with a molar mass of 20.18 g/mol is neon (Ne) and this is the identity of the gas.
Given the following data:
Density of gas = 1.57 g/LTemperature = 40.0°CPressure = 2.00 atmScientific data:
Ideal gas constant, R = 0.0821 L⋅atm/mol⋅KConversion:
Temperature = 40.0°C to K = [tex]273 +40=313\;K[/tex]
To determine the identity of this gas, we would apply the ideal gas law equation;
[tex]MM = \frac{R\rho T}{P}[/tex]
Where;
P is the pressure.MM is the molar mass of a gas.R is the ideal gas constant.T is the temperature.[tex]\rho[/tex] is the density of a gas.Substituting the given parameters into the formula, we have;
[tex]MM=\frac{0.0821 \times 1.57 \times 313}{2} \\\\MM=\frac{40.35}{2}[/tex]
Molar mass = 20.18 g/mol.
In Chemistry, the gas with a molar mass of 20.18 g/mol is neon (Ne).
Read more: https://brainly.com/question/20317432
what elements make up duralumin( an alloy)?
Answer:
In addition to aluminium, the main materials in duralumin are copper, manganese and magnesium.
Answer:
The original composition has been varied for particular applications; it may contain about 4 percent copper, 0.5–1 percent manganese, 0.5–1.5 percent magnesium, and, in some formulations, some silicon.
1 point
Which element requires the least amount of energy to remove its valence electron(s)?
barium
chlorine
oxygen
carbon
Describe how simple distillation is used to separate water from an aqueous solution of sodium
sulfate.
Answer:
hbyiy
Explanation:
formal charge of hcooh
Answer:
What is the question?
When a material gains thermal energy and melts, it is undergoing a physical change.
Answer:
True, it undergoes a physical change.
Explanation:
A physical change is a change that does not change the chemical makeup of a material. This includes altering its shape.
What is the concentration (M) of CH3OH in a solution prepared by dissolving 34.4 g of CH3OH in sufficient water to give exactly 230 mL of solution
Answer:
4.67M
Explanation:
The concentration of methanol (CH3OH) can be calculated using the following:
Molarity (M) = number of moles(n)/volume(v)
However, mole is not given. It can be obtained by using:
Mole = mass / molar mass
Where; mass = 34.4g
Molar mass (MM) of CH3OH is:
= 12 + 1(3) + 16 + 1
= 12 + 3 + 17
= 32g/mol
mole = 34.4/32
mole = 1.075mol
The volume needs to be converted to L by dividing by 1000
230mL = 230/1000
= 0.230L
Molarity = mol/volume
Molarity = 1.075/0.230
Molarity = 4.6739
Molarity = 4.67M
The concentration of CH3OH in solution is 4.67M
4. Question: What effect does the amount of light have on plant growth?
A neutral atom becomes a positive ion when it
Answer:
Neutral atoms can be turned into positively charged ions by removing one or more electrons.
Explanation:
If there is an atom that has 9 protons and 9 electrons, removing an electron from the atom will gain a postive charge.
A beverage manufacturer wants to increase The solunility of carbon dioxide in its carbonated drinks as beverages produced which action will increase the solubility of CO2 gas the most
A. Decreasing the pressure on it
B. Increasing stirring
C. Decreasing its temperature
D. Increasing its temperature
Answer: C
Explanation:
Ram has power of 550 watt.What does it mean?
Answer:
for electricity, watts as in back to the future "1.21 jigga watts"!
Explanation:
true or false???????????
Answer:
false
Explanation:
longer the wave length less frequency
g Lactate dehydrogenase is a tetrameric enzyme (144kDa) that catalyzes conversion of pyruvate into lactate to regenerate NAD in oxygen depleted muscles. a) Why in anaerobic conditions, is NADH oxidized by lactate dehydrogenase
Answer:
Kindly check the explanation.
Explanation:
NADH is oxidized anaerobic conditions by lactate dehydrogenase because in order to transform or change Pyruvate into Lactate it has to happen in an anaerobic condition that is where we hardly find oxygen(in the presence of no oxygen).
The chemical compound or say the enzyme known as lactate dehydrogenase gets its proton from NADH( in a REDOX type reaction). After getting the proton from NADH, it uses that to convert Pyruvate into Lactate.
NB: the conversion can also be done in aerobic condition but more ATP will be produced. With anaerobic condition, less ATO is produced and there is re-oxidation.
PLEASE HELP IM TIMED
Which of the following is not an oxidation-reduction reaction?
Upper X e upper F subscript 6 (s) right arrow upper X e upper F subscript 4 (s) plus upper F subscript 2 (g).
2 upper C s (s) plus upper I subscript 2 (g) right arrow 2 upper C s upper I (s).
2 upper H subscript 2 upper S upper O subscript 4 (a q) plus 2 upper B a (upper O upper H) subscript 2 (a q) right arrow 2 upper B a upper S upper O subscript 4 upper H subscript 2 upper O (l).
Upper Z n (s) lus 2 upper A g upper N upper O subscript 3 (a q) right arrow upper Z n (upper N upper O subscript 3) subscript 2 (a q) plus upper A g (s).
Answer: choice 2
Explanation:
What is the formula mass for (NH4)2C2O4
Answer:
124.1 g/mol
Explanation:
just facts
Answer:
124.1 g/mol
Explanation:
To calculate formula mass, multiply the subscript of each element in the formula by the element's atomic weight (relative atomic mass) found on the periodic table. The unit for formula mass is either u or Da (Daltons).
What volume. In liters, of H2O(g) measured at STP is produced by the combustion of 15.63 g of natural gas (CH4) according to the following equation? CHale) +20269) CO2 + 2H2008)
Answer:
V = 43.95 L
Explanation:
Given data:
Mass of CH₄ decomposed = 15.63 g
Volume of H₂O produced at STP = ?
Solution:
Chemical equation:
CH₄ + 2O₂ → 2H₂O + CO₂
Number of moles of CH₄:
Number of moles = mass/molar mass
Number of moles = 15.63 g/ 16 g/mol
Number of moles = 0.98 mol
Now we will compare the moles of H₂O with CH₄.
CH₄ : H₂O
1 : 2
0.98 : 2×0.98 = 1.96 mol
Volume of hydrogen:
PV = nRT
1 atm × V = 1.96 mol × 0.0821 atm.L/mol.K × 273.15 K
V = 43.95atm.L / 1atm
V = 43.95 L
9.Ammonium nitrate (NH4NO3) can decompose to form gaseous water, nitrogen, and oxygen. What is the sum of the coefficients in the balanced chemical equation
Answer:
the sum of the coefficients in the balanced chemical equation is 9
Explanation:
The computation of the sum of the coefficients in the balanced chemical equation is shown below:
here is the balanced chemical equation
[tex]2NH_4NO_3 \rightarrow 4H_2O)g) + 2N_2(g) + 1O_2(g)[/tex]
Now the sum is
= 2 + 4 + 2 + 1
= 9
hence, the sum of the coefficients in the balanced chemical equation is 9
and, the same is to be considered
Why do gases diffuse more quickly than liquids?
Choose the correct answer.
A) Liquids can be compressed easily.
B)The particles in gases are not mobile.
C)Liquids are always at lower temperatures than gases.
D)Gas particles move rapidly and have space between them.
Answer:
D)Gas particles move rapidly and have space between them.
Explanation:
Matter exists in three states namely: solids, liquids and gases. The particles contained in these three states are different from one another. In the gaseous state, the particles are FAR APART from one another i.e. space exists and they move at a very fast rate in contrast to the particles of a liquid, which have less space and move slower.
This rapid movement of gas particles within a less restricted space accounts for the reason why gaseous substances DIFFUSE more quickly than liquids.
Calculate the number of atoms present in .20 moles of H20.
Answer:
20 moles = (96.7+)
345%20 moles inter = h20
h2+345%20 moles
kalkadanc = jani+CARSORI
564 MOLES
Explanation
we have to plus the moles that we can get the answer and u should now the formula of kalkadanc and just % will get to the correct answer.
i think u may understand and this is the correct answer i had practice this too much
Answer the question below
Answer:
C
Explanation: I think
Please help I will give brainiest
Answer:
1. Least
2. Most
Answer:
1st one is less 2nd is greater
Explanation:
What type of bond would be expected between Mg and Ti?
A.hydrogen bond
Bionic bond
C.covalent bond
D.metallic bond
Conduction is the transfer of heat in?
gases
liquids
solids
Answer:
solids
Explanation:
What is the relationship between temperature and pressure
Which energy transformation produces electricity and is least likely to negatively impact the environment?
Generating electricity from a natural gas-fired power plant
Generating electricity from a natural gas-fired power plant
Generating electricity from a coal-fired power plant
Generating electricity from a coal-fired power plant
Generating electricity from a nuclear power plant
Generating electricity from a nuclear power plant
Generating electricity from a solar panel system
Generating electricity from a solar panel system
electricity from solar panels
Explanation:
All other options produce something after or during the time electricity is made. That something is gas. Not solar
On average what is the time between collisions of a xenon atom at 300 K and (a) one torr pressure; (b) one bar pressure.
Answer:
(a). 132 × 10^-9 s = 132 nanoseconds.
(b)..176.5 pico-seconds.
Explanation:
(a). At one torr, the first thing to do is to find the speed and that can be done by using the formula below;
Speed = [ (8 × R × T)/ Mm × π]^1/2.
Where Mm = molar mass, T = temperature and R = gas constant.
Speed= [ ( 8 × 8.314 × 300)/ 131.293 × π × 10^-3)^1/2. = 220m/s.
The next thing to do now is to calculate for the degree of collision which can be calculated by using the formula below;
Degree of collision = √2 × π × speed × d^2 × pressure/ K × T.
Note that pressure = 1 torr = 133.32 N/m^2 and d = collision diameter.
Degree of collision = √2 × π × 220 × (4.9 × 10^-10)^2 × 133.32/ 1.38 × 10^-23 × 300.
Degree of collision = 7.55 × 10^6 s^-1.
Thus, 1/ 7.55 × 10^6. = 132 × 10^-9 s = 132 nanoseconds.
(b). At one bar;
1/10^5 × 10^3 × 56.65 = 1.765 × 10^-10 = 176.5 pico-seconds.
in the following chemical reaction between H_2 and Cl_2 to produce HCl, what is the sum of the mass of HCl produced plus the mass of left over reactants when 0.40 g of H_2 completely reacts with 12.35 g of Cl_2?
H_2(g) + Cl_2(g) → 2HCl(g)
Answer:
Left over mass of hydrogen = 0.06 g
Mass of HCl produced = 12.41 g
Explanation:
Given data:
Mass of H₂ = 0.40 g
Mass of Cl₂ = 12.35 g
Mass of left over reactant = ?
Mass of HCl produced = ?
Solution:
Chemical equation:
H₂ + Cl₂ → 2HCl
Number of moles of H₂:
Number of moles = mass / molar mass
Number of moles = 0.40 g/ 2 g/mol
Number of moles = 0.2 mol
Number of moles of Cl₂:
Number of moles = mass / molar mass
Number of moles = 12.35 g/ 71 g/mol
Number of moles = 0.17 mol
Now we will compare the moles of HCl with H₂ and Cl₂.
H₂ : HCl
1 : 2
0.2 : 2×0.2 = 0.4
Cl₂ : HCl
1 : 2
0.17 : 2 × 0.17 = 0.34
Chlorine is limiting reactant.
Mass of HCl produced:
Mass = number of moles × molar mass
Mass = 0.34 mol × 36.5 g/mol
Mass = 12.41 g
Leftover mass of hydrogen:
Cl₂ : H₂
1 : 1
0.17 : 0.17
Number of moles of H₂ react with Cl₂ are 0.17.
Moles remain unreacted = 0.2 - 0.17 = 0.03 mol
Mass left over:
Mass = number of moles × molar mass
Mass = 0.03 mol × 2 g/mol
Mass = 0.06 g
The sum of the mass of HCl produced plus the mass of left over reactants is:
Mass of hydrogen = 0.06 g
Mass of HCl = 12.41 g
Chemical ReactionGiven:
Mass of H₂ = 0.40 g
Mass of Cl₂ = 12.35 g
Mass of left over reactant = ?
Mass of HCl produced = ?
Chemical equation: H₂ + Cl₂ → 2HClNumber of moles of H₂:
Number of moles = mass / molar mass
Number of moles = 0.40 g/ 2 g/mol
Number of moles = 0.2 mol
Number of moles of Cl₂:
Number of moles = mass / molar mass
Number of moles = 12.35 g/ 71 g/mol
Number of moles = 0.17 mol
The moles of HCl with H₂ and Cl₂.
H₂ : HCl
1 : 2
0.2 : 2×0.2 = 0.4
Cl₂ : HCl
1 : 2
0.17 : 2 × 0.17 = 0.34
The chlorine is limiting reactant.
Mass of HCl produced:
Mass = number of moles × molar mass
Mass = 0.34 mol × 36.5 g/mol
Mass = 12.41 g
Leftover mass of hydrogen:
Cl₂ : H₂
1 : 1
0.17 : 0.17
Number of moles of H₂ react with Cl₂ are 0.17.
Moles remain unreacted = 0.2 - 0.17 = 0.03 mol
Mass left over:
Mass = number of moles × molar massMass = 0.03 mol × 2 g/molMass = 0.06 gLearn more about "Moles":
https://brainly.com/question/7287712?referrer=searchResults
25. Which of the following statements concerning atomic structure is/are correct?
1. The nucleus contains most of an atom's mass.
2. The nucleus contains all the positive charge of an atom.
3. Electrons surround the nucleus and account for the majority of an atom's volume.
1 only
2 only
3 only
2 and 3
1, 2, and 3
Answer:
It would be 2 and 3
The image shows the structure of an atom, I hope it helps :)
To see the number of atoms of an element in a given molecule we need to multiply stoichiometry to the number that is written on the foot of the element that is stoichiometry. Therefore, the correct option is option 2,3.
What is atom?Atom is the smallest particle of any element, molecule or compound. Atom can not be further divided. Atoms contains nucleus in its center and electron that revolve around the atom in fixed orbit.
In the nucleus, proton and neutron are present. Electron has -1 charge while proton has +1 charge. Neutron is neutral that is it has no charge. So overall the charge of nucleus is due to only proton, not by neutron. The nucleus contains all the positive charge of an atom. Electrons surround the nucleus and account for the majority of an atom's volume.
Therefore, the correct option is option 2,3.
To know more about atom, here:
https://brainly.com/question/13518322
#SPJ2
A scientist who collects and analyzes DNA from a crime scene is a
Answer:
forensic scientist
Explanation:
forensic science is the discipline in which professionals use scientific means to analyze physical crime evidence. this evidence is then presented in court in order to help determine the innocence or guilt of a specific suspect.
Answer:
Its a forensic scientist :D
Explanation:
I took a test and got it wrong but it showed the right answer and its a forensic scientist
(don't ask how i got it wrong i was rushing!!)